☆ 4.6 Article

Preparation and characterization of highly active and stable NdBaCo0.8Fe0.8Ni0.4O5+δ oxygen electrode for solid oxide fuel cells

ELECTROCHIMICA ACTA (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Mutual Conversion of CO-CO2 on a Perovskite Fuel Electrode with Endogenous Alloy Nanoparticles for Reversible Solid Oxide Cells

Yihang Li et al.

Summary: Researchers demonstrate a high-performing and durable fuel electrode for reversible solid oxide cells (RSOCs) that significantly improves the mutual CO-CO2 conversion kinetics. Their work provides an alternative way to design highly active and durable fuel electrodes for RSOC applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Electrochemistry

Double substituted NdBa(Fe,Co,Cu)2O5+δ layered perovskites as cathode materials for intermediate-temperature solid oxide fuel cells-correlation between structure and electrochemical properties

Andrei Klyndyuk et al.

Summary: Double-doped NdBa(Fe, Co, Cu) (2)O5+delta layered perovskites were prepared and examined in this study. The physicochemical analysis showed that these materials have good electrical conductivity and linear thermal expansion coefficient, making them suitable as cathode materials for solid-oxide fuel cells.

ELECTROCHIMICA ACTA (2022)

添加到收藏夹

Article Chemistry, Physical

Investigation into structure and property of W and Ti co-doped SrFeO3 perovskite as electrode of symmetrical solid oxide fuel cell

Taolong Su et al.

Summary: SrFe0.9-xW0.1TixO3-$ perovskite oxides were synthesized by combustion process. The effects of dopant W and Ti on material properties and structure were investigated experimentally and computationally. It was found that optimizing the Ti content could improve the conductivity and stability of the materials.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Highly active and stable BaCo0.8Zr0.1Y0.1O3-δ cathode for intermediate temperature solid oxide fuel cells

Wendi Yi et al.

Summary: This study presents the development of a new perovskite oxide, BCZY, as a cathode material for SOFCs. The BCZY cathode demonstrates excellent stability, good ORR activity, and superior CO2 tolerance at intermediate temperatures. The results indicate that BCZY could be a potential cathode material for IT-SOFCs.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Engineering, Chemical

Tailoring the structural stability, electrochemical performance and CO2 tolerance of aluminum doped SrFeO3

Daoming Huan et al.

Summary: This study reports the stabilization of SrFeO3-delta perovskite in a cubic structure by doping aluminum cations in the B-site, which greatly improves its electrocatalytic activity for oxygen reduction reaction and CO2 tolerance.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

A SrCo0.9Ta0.1O3-δ derived medium-entropy cathode with superior CO2 poisoning tolerance for solid oxide fuel cells

Yuan Gao et al.

Summary: This study designs and evaluates a new medium-entropy cathode material SCFTTN52111, which exhibits lower polarization resistance and higher oxygen reduction activity compared to the existing material SCT91. Additionally, SCFTTN52111 shows outstanding stability and high CO2 tolerance. This research provides a feasible and effective approach for the design of cathode materials for SOFCs.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mutual Conversion of CO-CO2 on a Perovskite Fuel Electrode with Endogenous Alloy Nanoparticles for Reversible Solid Oxide Cells

Yihang Li et al.

Summary: A high-performing and durable fuel electrode consisting of redox-stable Sr-2(Fe, Mo)2O6-delta perovskite oxide and epitaxially endogenous NiFe alloy nanoparticles is demonstrated for improving mutual CO-CO2 conversion kinetics in RSOCs, achieving reliable reversible CO-CO2 conversion without performance degradation in 20 cycles.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Physical

Cobalt substituted Pr2Ni1-xCoxO4+δ (x=0, 0.1, 0.2) oxygen electrodes: Impact on electrochemical performance and durability of solid oxide electrolysis cells

V. Vibhu et al.

Summary: This study aims to enhance the physico-chemical properties and durability of high temperature Solid Oxide Electrolysis Cells (SOECs) by substituting nickel with cobalt in layered perovskites based alternative oxygen electrodes. Results show that cobalt substitution leads to improved electrochemical performance and reduced degradation rate during short term SOEC operation.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Thermal-expansion offset for high-performance fuel cell cathodes

Yuan Zhang et al.

Summary: This study demonstrates an approach to achieving full thermo-mechanical compatibility between the cathode and other cell components for solid oxide fuel cells. By introducing a thermal-expansion offset and using reactive sintering to form a composite electrode, the research shows high activity and excellent stability of the electrode. The introduction of reactive negative-thermal-expansion components may provide a general strategy for developing fully compatible and highly active electrodes for SOFCs.

NATURE (2021)

添加到收藏夹

Article Chemistry, Physical

On the wrong assignment of the XPS O1s signal at 531-532 eV attributed to oxygen vacancies in photo- and electro-catalysts for water splitting and other materials applications

Hicham Idriss

Summary: The XPS O1s signal mistakenly attributed to oxygen vacancies is actually due to the adsorption of water molecules on the oxide surface under ambient conditions. Surface oxygen vacancies in binary or mixed metal oxide materials or catalysts will be oxidized instantly due to the strong adsorption energy of water, making it impossible for ex-situ measurements.

SURFACE SCIENCE (2021)

添加到收藏夹

Article Engineering, Environmental

Nickel-doped BaCo0.4Fe0.4Zr0.1Y0.1O3-δ as a new high-performance cathode for both oxygen-ion and proton conducting fuel cells

Mingzhuang Liang et al.

Summary: By systematically investigating partial doping of different metal elements in BaCo0.4Fe0.4Zr0.1Y0.1O3-delta (BCFZY), Ba(Co0.4Fe0.4Zr0.1Y0.1)0.95Ni0.05O3-delta (BCFZYN) was found to exhibit the lowest polarization impedance and achieve high ORR activity. Nickel doping in BCFZYN improves oxygen mobility, surface exchange kinetics, and bulk oxygen ion and proton conductivity, leading to outstanding operational stability in SOFCs.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Copper doped SrFe0.9-xCuxW0.1O3-δ (x=0-0.3) perovskites as cathode materials for IT-SOFCs

Chuangang Yao et al.

Summary: The study investigated the effects of Cu doping on SrFe0.9-xCuxW0.1O3-delta samples as SOFC cathode materials. Cu doping decreased the oxygen content, leading to decreased electrical conductivity and increased thermal expansion coefficient. Within a certain range, Cu doping can reduce ASR values and enhance the activation energy for ORR.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Enabled fast cathode kinetics for intermediate-temperature solid oxide fuel cell with improved CO2 poisoning robustness: La2NiO4 surfaced-modified SrCo0.8Nb0.1Ta0.1O3-δ composite

Jun Li et al.

Summary: A study proposed an effective strategy to enhance the CO2 tolerance of solid oxide fuel cell cathode through surface modification, which reduced the polarization resistance and exhibited less catalytic activity attenuation in CO2 atmosphere. The modification synergistically enhanced oxygen reduction reaction kinetics and CO2 poisoning robustness for the perovskite material, showing great potential for future applications in SOFC technology.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Physical

Site-oriented design of spinel MgxNiMn2-xO4-δ as cathode material of intermediate-temperature direct ammonia solid oxide fuel cell

Fulan Zhong et al.

Summary: The study focuses on designing a good cathode material based on spinel NiMn2O4 with the addition of magnesium to induce oxygen vacancies and improve performance. The resulting MgxNiMn2-xO4-delta oxide showed higher compatibility with the solid oxide fuel cell and exhibited better electrochemical performance compared to a commercial LSM-based one.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Materials Science, Ceramics

Ba0.5Sr0.5Co0.8-xFe0.2NbxO3-δ (x≤ 0.1) as cathode materials for intermediate temperature solid oxide fuel cells with an electron-blocking interlayer

Yuwen Huang et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Chemistry, Physical

Effective promotion of oxygen reduction activity by rare earth doping in simple perovskite cathodes for intermediate-temperature solid oxide fuel cells

Wenwen Zhang et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

Stable, efficient and cost-competitive Ni-substituted Sr(Ti,Fe)O3 cathode for solid oxide fuel cell: Effect of A-site deficiency

Weijie Ni et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

Highly active and CO2-tolerant Sr2Fe1.3Ga0.2Mo0.5O6-δ cathode for intermediate-temperature solid oxide fuel cells

Chunming Xu et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

Ca-containing Ba0.95Ca0.05Co0.4Fe0.4Zr0.1Y0.1O3-δ cathode with high CO2-poisoning tolerance for proton-conducting solid oxide fuel cells

Jun Li et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

A Zn-Doped Ba0.5Sr0.5Co0.8Fe0.2O3-δ Perovskite Cathode with Enhanced ORR Catalytic Activity for SOFCs

Qiannan Zeng et al.

CATALYSTS (2020)

添加到收藏夹

Article Chemistry, Physical

A new highly active and CO2-stable perovskite-type cathode material for solid oxide fuel cells developed from A- and B-site cation synergy

Junxing Zhang et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

Probing oxygen vacancy effect on oxygen reduction reaction of the NdBaCo2O5+δ cathode for solid oxide fuel cells

Chengzhi Sun et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

A highly stable cobalt-free LaBa0.5Sr0.5Fe2O6-δ oxide as a high performance cathode material for solid oxide fuel cells

Huan Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Effects of niobium doping on the stability of SrCo0.2Fe0.8O3-δ cathodes for intermediate temperature solid oxide fuel cells

Yufeng Qiu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

Validation of defect association energy on modulating oxygen ionic conductivity in low temperature solid oxide fuel cell

Arunkumar Pandiyan et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Electrochemistry

Highly active and stable tin-doped perovskite-type oxides as cathode materials for solid oxide fuel cells

Huan Li et al.

ELECTROCHIMICA ACTA (2020)

添加到收藏夹

Article Chemistry, Physical

Trade-off between oxygen reduction reaction activity and CO2 stability in a cation doped Ba0.9Co0.7Fe0.3O3-δ perovskite cathode for solid oxide fuel cells

Yi Lu et al.

SUSTAINABLE ENERGY & FUELS (2020)

添加到收藏夹

Article Chemistry, Physical

Ta-doped PrBa0.94Co2-xTaxO5+δ as promising oxygen electrodes: A focused study on catalytic oxygen reduction reaction activity, stability and CO2-durability

Feifei Lu et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Review Electrochemistry

Cobalt-Free Perovskite Cathodes for Solid Oxide Fuel Cells

Siti Salwa Hashim et al.

CHEMELECTROCHEM (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Nanocomposite electrodes for high current density over 3 A cm-2 in solid oxide electrolysis cells

Hiroyuki Shimada et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Energy & Fuels

Electrochemical analysis of high-performance protonic ceramic fuel cells based on a columnar-structured thin electrolyte

Sung Min Choi et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Insights into the CO2 Stability-Performance Trade-Off of Antimony-Doped SrFeO3-δ Perovskite Cathode for Solid Oxide Fuel Cells

Yuqing Meng et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Nickel-substituted Ba0.5Sr0.5Co0.8Fe0.2O3-: a highly active perovskite oxygen electrode for reduced-temperature solid oxide fuel cells

Lu Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Synthesis and characterization of Ba0.5Sr0.5Co0.8Fe0.1Ni0.1O3-δ cathode for intermediate-temperature solid oxide fuel cells

Biao Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Evaluation of La2-xNiMnO6-δ as cathode for intermediate temperature solid oxide fuel cells

Li-Ping Sun et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Electrochemistry

Tailoring Ni-based catalyst by alloying with transition metals (M = Ni, Co, Cu, and Fe) for direct hydrocarbon utilization of energy conversion devices

Seona Kim et al.

ELECTROCHIMICA ACTA (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Excellence of Both Worlds: Developing Effective Double Perovskite Oxide Catalyst of Oxygen Reduction Reaction for Room and Elevated Temperature Applications

Bin Hua et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Quantitative analysis of Fe and Co in Co-substituted magnetite using XPS: The application of non-linear least squares fitting (NLLSF)

Hongmei Liu et al.

APPLIED SURFACE SCIENCE (2016)

添加到收藏夹

Article Electrochemistry

Electrical, thermal and electrochemical properties of SmBa1-xSrxCo2O5+δ cathode materials for intermediate-temperature solid oxide fuel cells

Adi Subardi et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Electrochemistry

Cobalt-free double perovskite cathode GdBaFeNiO5+δ and electrochemical performance improvement by Ce0.8Sm0.2O1.9 impregnation for intermediate-temperature solid oxide fuel cells

Lei Li et al.

ELECTROCHIMICA ACTA (2015)

添加到收藏夹

Article Chemistry, Physical

The effect of A-site and B-site substitution on BaFeO3-δ: An investigation as a cathode material for intermediate-temperature solid oxide fuel cells

Jian Wang et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Chemistry, Physical

Praseodymium-deficiency Pr0.94BaCo2O6-δ double perovskite: A promising high performance cathode material for intermediate-temperature solid oxide fuel cells

Fuchang Meng et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Chemistry, Physical

NdBaCo2/3Fe2/3Cu2/3O5+delta double perovskite as a novel cathode material for CeO2- and LaGaO3-based solid oxide fuel cells

Fangjun Jin et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Chemistry, Physical

Reconstruction of relaxation time distribution from linear electrochemical impedance spectroscopy

Yanxiang Zhang et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Review Chemistry, Physical

Layered LnBaCo(2)O(5+delta) perovskite cathodes for solid oxide fuel cells: an overview and perspective

Jung-Hyun Kim et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Electrochemistry

Evaluation of Pr1+xBa1-xCo2O5+δ (x=0-0.30) as cathode materials for solid-oxide fuel cells

Long Jiang et al.

ELECTROCHIMICA ACTA (2014)

添加到收藏夹

Article Chemistry, Physical

Structure and Properties of Novel Cobalt-Free Oxides NdxSr1-xFe0.8Cu0.2O3-δ (0.3 ≤ x ≤ 0.7) as Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Jie-Wei Yin et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

添加到收藏夹

Article Chemistry, Physical

Assessment of LnBaCo1.6Ni0.4O5+δ (Ln = Pr, Nd, and Sm) double-perovskites as cathodes for intermediate-temperature solid-oxide fuel cells

Xiangli Che et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Chemistry, Physical

Characterization and evaluation of NdBaCo2O5+delta cathode for proton-conducting solid oxide fuel cells

Ling Zhao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

添加到收藏夹

Article Chemistry, Physical

Effect of Fe substitution on the structure and properties of LnBaCo2-xFexO5+δ (Ln = Nd and Gd) cathodes

Y. N. Kim et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

Article Chemistry, Physical

Performances of LnBaCo2O5+x-Ce0.8Sm0.2O1.9 composite cathodes for intermediate-temperature solid oxide fuel cells

Qingjun Zhou et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

Article Electrochemistry

Layered NdBaCo2-xNixO5+δ perovskite oxides as cathodes for intermediate temperature solid oxide fuel cells

J. -H. Kim et al.

ELECTROCHIMICA ACTA (2009)

添加到收藏夹

Article Chemistry, Physical

X-ray photoelectron spectroscopic chemical state quantification of mixed nickel metal, oxide and hydroxide systems

Mark C. Biesinger et al.

SURFACE AND INTERFACE ANALYSIS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis, characterization and evaluation of cation-ordered LnBaCo2O5+δ as materials of oxygen permeation membranes and cathodes of SOFCs

Kun Zhang et al.

ACTA MATERIALIA (2008)

添加到收藏夹

Article Chemistry, Physical

Electrical and thermal properties of (Ba0.5Sr0.5) 1-xSmxCo0.8Fe0.2O3-δ perovskite oxides

Shuyan Li et al.

SOLID STATE IONICS (2007)

添加到收藏夹

Article Chemistry, Physical

La1-xCaxCoO3 perovskite-type oxides:: Identification of the surface oxygen species by XPS

Nora A. Merino et al.

APPLIED SURFACE SCIENCE (2006)

添加到收藏夹

Article Electrochemistry

Thermal and electrical properties of new cathode material Ba0.5Sr0.5Co0.8Fe0.2O3-delta for solid oxide fuel cells

B Wei et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)

添加到收藏夹

Article Chemistry, Physical

Characterization of LSM-YSZ composite electrode by ac impedance spectroscopy

JD Kim et al.

SOLID STATE IONICS (2001)

添加到收藏夹

Article Chemistry, Physical

Electrodeposited Ni-Co-oxide electrodes: characterization and kinetics of the oxygen evolution reaction

EB Castro et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.