相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Passivation Behavior of 2507 Super Duplex Stainless Steel in Hot Concentrated Seawater: Influence of Temperature and Seawater Concentration
Kang Zhao et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2022)
The corrosion behavior of Ti6Al4V fabricated by selective laser melting in the artificial saliva with different fluoride concentrations and pH values
Hongwei Zhang et al.
CORROSION SCIENCE (2021)
Different corrosion behaviors between α and β phases of Ti6Al4V in fluoride-containing solutions: Influence of alloying element Al
Hongwei Zhang et al.
CORROSION SCIENCE (2020)
Microstructural examination and corrosion behavior of selective laser melted and conventionally manufactured Ti6Al4V for dental applications
Hafiz Muhammad Hamza et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Numerical Simulation of Residual Stress for Laser Welding of Ti-6Al-4V Alloy Considering Solid-State Phase Transformation
Lingda Xiong et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer's solution for bio-implant application
Sivakumar Bose et al.
APPLIED SURFACE SCIENCE (2018)
A comparative study of primary and secondary passive films formed on AM355 stainless steel in 0.1 M NaOH
Cheng Man et al.
APPLIED SURFACE SCIENCE (2018)
Synergistic effects of fluoride and chloride on general corrosion behavior of AISI 316 stainless steel and pure titanium in H2SO4 solutions
Z. B. Wang et al.
CORROSION SCIENCE (2018)
The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6A1-4V alloy in 3.5% NaCl solution
Bintao Wu et al.
CORROSION SCIENCE (2018)
Heat treatments effects on functionalization and corrosion behavior of Ti-6Al-4V ELI alloy made by additive manufacturing
Guilherme Arthur Longhitano et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of fluoride on the corrosion behavior of nanostructured Ti-24Nb-4Zr-8Sn alloy in acidulated artificial saliva
Ji Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting
Xin Gai et al.
CORROSION SCIENCE (2018)
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2018)
Characterization of the Passive Film and Corrosion of Martensitic AM355 Stainless Steel
Cheng Man et al.
ANALYTICAL LETTERS (2017)
Passivation Behavior and Surface Chemistry of 2507 Super Duplex Stainless Steel in Acidified Artificial Seawater Containing Thiosulfate
Zhongyu Cui et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Heat Treatment Degrading the Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy
Nianwei Dai et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Promising characteristics of gradient porosity Ti-6Al-4V alloy prepared by SLM process
Michaela Fousova et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Effect of crystallographic orientation on mechanical anisotropy of selective laser melted Ti-6Al-4V alloy
Jingjing Yang et al.
MATERIALS CHARACTERIZATION (2017)
Is niobium more corrosion-resistant than commercially pure titanium in fluoride-containing artificial saliva?
Yu Li et al.
ELECTROCHIMICA ACTA (2017)
Electrochemical characterization and passivation behaviour of new beta-titanium alloys (Ti35NblOTa-xFe)
J. Navarro Laboulais et al.
ELECTROCHIMICA ACTA (2017)
Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2016)
Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
Jyoti Suryawanshi et al.
ACTA MATERIALIA (2016)
Comparison of the corrosion behavior of pure titanium and its alloys in fluoride-containing sulfuric acid
Z. B. Wang et al.
CORROSION SCIENCE (2016)
Microstructural evolution and microhardness of a selective-laser-melted Ti-6Al-4V alloy after post heat treatments
S. Q. Wu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Estimation of lattice strain in nanocrystalline RuO2 by Williamson-Hall and size-strain plot methods
R. Sivakami et al.
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2016)
Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting
Xiaoli Zhao et al.
MATERIALS & DESIGN (2016)
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Jingjing Yang et al.
MATERIALS & DESIGN (2016)
Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
W. Xu et al.
ACTA MATERIALIA (2015)
Corrosion performance and surface analysis of Ti-Ni-Pd-Ru-Cr alloy in nitric acid solution
S. Ningshen et al.
CORROSION SCIENCE (2015)
Role of element partitioning on the α-β phase transformation kinetics of a bi-modal Ti-6Al-6V-2Sn alloy during continuous heating
Pere Barriobero-Vila et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
A modified surface charge approach to the film growth and dissolution of iron in concentrated phosphoric acid
Iva Betova
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2015)
A Kinetic Model for the Anodic Dissolution of Ti in HF in the Active and Passive Regions
Fathima Fasmin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
A combined energy and error optimization method for metal powder based additive manufacturing processes
Ratnadeep Paul et al.
RAPID PROTOTYPING JOURNAL (2015)
The effect of fluoride ions on the corrosion behavior of pure titanium in 0.05 M sulfuric acid
Z. B. Wang et al.
ELECTROCHIMICA ACTA (2014)
Atmospheric corrosion of field-exposed AZ31 magnesium in a tropical marine environment
Zhongyu Cui et al.
CORROSION SCIENCE (2013)
Enhanced photocatalytic activity of C, F-codoped TiO2 loaded with AgCl
Hongjian Yan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Isothermal α formation in β metastable titanium alloys
E. Aeby-Gautier et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
H. K. Rafi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
A Method Developed for Getting Kinetic Information from Electrochemical Impedance Spectroscopy Measured for Anodized Ti in Fluoride
De-Sheng Kong et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Dielectric Properties of Materials Showing Constant-Phase-Element (CPE) Impedance Response
Mark E. Orazem et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Influence of fluoride content on the barrier layer formation and titanium dissolution in ethylene glycol-water electrolytes
Mina Stancheva et al.
ELECTROCHIMICA ACTA (2012)
The history of the Point Defect Model for the passive state: A brief review of film growth aspects
Digby D. Macdonald
ELECTROCHIMICA ACTA (2011)
Genotoxic effects of aluminum, iron and manganese in human cells and experimental systems: A review of the literature
P. D. L. Lima et al.
HUMAN & EXPERIMENTAL TOXICOLOGY (2011)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Influence of fluoride ion on the electrochemical behaviour of β-Ti alloy for dental implant application
Satendra Kumar et al.
CORROSION SCIENCE (2010)
The effect of hydrofluoric acid treatment of titanium surface on nanostructural and chemical changes and the growth of MC3T3-E1 cells
Sebastien F. Lamolle et al.
BIOMATERIALS (2009)
Electrochemical Anodic Dissolution Kinetics of Titanium in Fluoride-Containing Perchloric Acid Solutions at Open-Circuit Potentials
De-Sheng Kong et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
An integrated approach to electrochemical impedance spectroscopy
Mark E. Orazem et al.
ELECTROCHIMICA ACTA (2008)
Influence of fluoride concentration and pH on corrosion behavior of titanium in artificial saliva
Alain Robin et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2007)
Low temperature relaxation of residual stress in Ti-6Al-4V
JW Elmer et al.
SCRIPTA MATERIALIA (2005)
Effect of fluoride and albumin concentration on the corrosion behavior of Ti-6Al-4V alloy
HH Huang
BIOMATERIALS (2003)
Influence of pH and fluoride concentration on titanium passivating layer: stability of titanium dioxide
Y Fovet et al.
TALANTA (2001)
Resistivity study and computer modelling of the isothermal transformation kinetics of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo-0.08Si alloys
S Malinov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2001)
分享论文
