Galvanic corrosion of AA5052/304SS welded joint with Zn-based filler metal in marine engineering

Article Materials Science, Multidisciplinary

Effect of solid solution Zn atoms on corrosion behaviors of Mg-2Nd-2Zn alloys

Lingxiong Sun et al.

Summary: The effects of heat treatments on the microstructures and corrosion behaviors of extruded Mg-2Nd-2Zn alloys were investigated. It was found that the solid solution treatment significantly reduced the corrosion rate of Mg alloys.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Engineering, Manufacturing

Effect of intermetallic compounds on the mechanical property and corrosion behaviour of aluminium alloy/steel hybrid fusion-brazed welded structure

Hong Ma et al.

Summary: Different heat inputs during fusion-brazing welding can affect the thickness of intermetallic compounds (IMCs) layer in Al alloy/steel joints, including the formation of Fe-Al binary IMCs and Fe-Al-Si ternary IMCs. Welding under high heat input may lead to enhanced tunnelling corrosion and increase corrosion current density, while higher heat input can reduce corrosion of binary IMCs due to cathodic corrosion protection. Utilizing low heat input can preserve the corrosion resistance and mechanical performance of the joint.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Pitting behavior of 316L stainless steel in direct culture with mesenchymal stem cells

Jing Wu et al.

Summary: Corrosion is a major reason for the failure of metallic implants. The presence of bone marrow derived mesenchymal stem cells (BMSCs) can decrease the stability of 316 L stainless steels (316 L SS), leading to preferential pitting corrosion initiation at the peripheries of BMSCs.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tuning the pitting performance of a Cr-13 type martensitic stainless steel by tempering time

Feng Yuan et al.

Summary: The microstructural evolution and pitting performance of Cr-13 type martensitic stainless steel tempered at 500°C for different times were studied. Severe corrosion was observed when tempering was done within 2-24 hours, while passivation was recovered when tempering time was increased to 48 hours or longer. The research provides a new approach to optimizing the corrosion resistance of martensitic stainless steels through tempering time.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Identification of the critical microstructural parameters on the corrosion behaviour of commercially pure aluminium alloy

A. Ingle et al.

Summary: The study found that an increase in the density of high-angle grain boundaries can decrease the corrosion current of commercially pure Al alloy in chloride-sulphate solution, while intermetallic particles may act as pit initiation sites. In addition, the propagation of pits is strongly influenced by the density of high-angle grain boundaries.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synergistic inhibition mechanism of phosphate and phytic acid on carbon steel in carbonated concrete pore solutions containing chlorides

Yongqi Liu et al.

Summary: This study investigated the synergistic inhibition performance of trisodium phosphate and phytic acid on chloride-induced corrosion of Q235 carbon steel in carbonated concrete pore solutions using various techniques. The mixed inhibitor showed high inhibition efficiency due to the formation of a protective oxide film, but excessive phytic acid content competed with trisodium phosphate, leading to reduced inhibition efficiencies.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Time-varying electrochemically heterogeneous entities during the micro-galvanic corrosion associated with nanoscale precipitates in an Al-Cu-Li alloy

Ying Jiang et al.

Summary: This study reveals the time-dependent behavior of electrochemically heterogeneous entities involved in the micro-galvanic corrosion of T-1 precipitates in AA2195 alloy. The findings show a Li-leaching process in the anodic T-1 precipitates at the sub-nanometer scales, leading to a transformation of the micro-galvanic couples and resulting in corrosion of the matrix with Al-selective dissolution. The corroded bands parallel to {111}(alpha) planes then develop into gross pitting driven by solution acidification and redeposition of thermodynamically nobler Cu, forming Cu-matrix couples.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

New insights on the initial local corrosion of composite Al7Cu2Fe/Al20Cu2Mn3 intermetallic particles in 2024-T351 aluminum alloy

Qiyao He et al.

Summary: The study found that regions with long-range ordered structure in composite Al7Cu2Fe/Al20Cu2Mn3 intermetallic particles are the initial sites of local corrosion, and dealloying at the Al7Cu2Fe/Al20Cu2Mn3 interface increases the local potential difference, triggering anodic dissolution of the Al20Cu2Mn3 phase. This study provides new insights into the initiation and propagation mechanism of localized corrosion in composite IMPs.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultra-high corrosion resistance of Al-Mg-Si film on steel sheet formed by PVD Mg coating and heat treatment

Gi-Dong Park et al.

Summary: Alloy films with excellent corrosion resistance were fabricated by depositing an Mg film on Al-Si coated steel sheets and applying heat treatment. The Mg in the film was widely distributed in a dissolved state on the AI phase and continuously involved in the corrosion product formation reaction, leading to the excellent barrier effect against corrosion factors. The corrosion resistance evaluation results were explained by analyzing the properties of the alloy film and the mechanism of forming corrosion products.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The ability of Mg2Ge crystals to behave as 'smart release' inhibitors of the aqueous corrosion of Zn-Al-Mg alloys

N. Wint et al.

Summary: The addition of germanium reduces corrosion in zinc-aluminium-magnesium alloys by forming Mg2Ge crystals. A 58% decrease in mass loss rate was achieved at high germanium content (1.8 wt.%), indicating that Mg2Ge crystals act as reservoirs for Mg2+ ions.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of micro-alloying element La on corrosion behavior of Al-Mg-Si alloys

Qiuju Zheng et al.

Summary: The study found that micro-alloying element La can improve the corrosion resistance of Al-Mg-Si alloys by forming Mg2Si particles with a La-rich surface shell and isolated Si particles, which slows down the corrosion rate and inhibits localized corrosion.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Galvanic corrosion behavior of friction stir welded AZ31B magnesium alloy and 6N01 aluminum alloy dissimilar joints

Yu-Jui Lin et al.

Summary: The corrosion behavior and corrosion rate of friction stir welded AZ31B magnesium alloy and 6N01 aluminum alloy dissimilar joints were studied using real-time imaging, potentiodynamic polarization, EIS, and hydrogen evolution tests. The corrosion rate was found to increase in the order of Al base metal < Mg base metal < stirred zone. The galvanic coupling of the Mg phase to other phases enhanced the corrosion of both base metals, and intense corrosion at BM-AZ31B elevated the interfacial pH due to water reduction on the cathodic particles of BM-6N01.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel

S. K. Pradhan et al.

Summary: The individual implications of sensitization, grain size, residual strain, and grain boundary characteristics on the semiconducting response of passive film in 304 stainless steel were investigated. Higher donor densities in the sensitized specimen deteriorated passive film stability, while a greater density of random grain boundaries promoted defect formation in the film. In contrast, a higher fraction of 'special' boundaries and triple junctions, achieved through grain boundary engineering, suppressed defect formation and enhanced passive film protection.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A survey on the passivity of tempered AISI 420 martensitic stainless steel

Khashayar Morshed-Behbahani et al.

Summary: The research found that samples with less internal stress formed denser and less defective passive films on their surfaces, attributed to higher concentration of metal ions at the metal/solution interface during anodization process. Prolonged passivation times resulted in more impurities being incorporated into the growing passive film, deteriorating its electrochemical properties.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Galvanic corrosion behavior between AZ91D magnesium alloy and copper in distilled water

Wenlu Yang et al.

Summary: The galvanic corrosion behavior between AZ91D magnesium alloy and copper in distilled water was studied through electrochemical methods and surface characterization. The results revealed that the potential difference between coupled metals is more suitable for calculating the galvanic current density, and the galvanic effect between them enhances the corrosion of AZ91D magnesium alloy while reducing the protection of corrosion product film. The galvanic current density increases with higher temperature and soaking time, possibly due to the destruction of cathodic hydrogen evolution on the corrosion product film.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of rare earth modifying inclusions on the pitting corrosion of 13Cr4Ni martensitic stainless steel

Changgang Wang et al.

Summary: This study characterized the pitting corrosion behavior of martensitic stainless steel with and without rare earth modification in NaCl solution. The presence of different inclusions in BASE and REM steels affected the pitting resistance, with REM steel showing both increased susceptibility to pitting nucleation and improved repassivation. The concentration of rare earth elements in the steel matrix influenced the number and size of inclusions, ultimately affecting the overall pitting corrosion resistance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of axial magnetic field on TIG welding-brazing of AA6061 aluminum alloy to HSLA350 steel

Rui Li et al.

Summary: External magnetic field (EMF) has positive effects on joint quality by refining the Al matrix and second phases, increasing joint strength, and reducing the formation of intermetallic compounds (IMCs) layer at the Al/steel welding seam interface.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the corrosion of a high solute Al-Zn-Mg alloy produced by laser powder bed fusion

A. P. Babu et al.

Summary: The research examined an additively manufactured aluminium alloy with high solute content, Al-14Zn-3Mg, which showed lower corrosion rate compared to a conventional wrought alloy, AA7075-T6. This difference was attributed to the microstructure and solute content of Al-14Zn-3Mg, specifically the absence of coarse intermetallic particles. Various tests were conducted to analyze the corrosion behavior of this new alloy manufactured through LPBF.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study on the galvanic corrosion of a sol-gel coated PEO Mg-CFRP couple

Monika Ostapiuk et al.

Summary: The study found that using PEO and sol-gel as barrier layers can slow down the galvanic corrosion between magnesium alloy AZ31 and CFRP, providing short-term corrosion protection.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new method to determine the synergistic effects of area ratio and microstructure on the galvanic corrosion of LAS A508/309 L/308 L SS dissimilar metals weld

Bright O. Okonkwo et al.

Summary: The study investigated the synergistic effects of area ratio and microstructure on galvanic corrosion of A508/309 L/308 L dissimilar metals weld. Results showed that reducing the anode/cathode surface area ratio significantly increased the corrosion rate of A508. AFM analysis revealed that in the galvanic interaction, the grain refined region experienced the most severe corrosion.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The behaviour of AA5754 and AA5052 aluminium alloys in alkaline etching solution: Similarity and difference

Zelong Jin et al.

Summary: In this study, the behaviour of AA5754 and AA5052 alloys in alkaline solution was investigated using analytical electron microscopy. The study revealed significant differences in dissolution rate, change of intermetallic particle population density, and compositional and morphological change of various intermetallic particles between the two alloys. The root cause for the different behaviour of the two alloys in alkaline solution was discussed.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion behavior of spangle on a batch hot-dip galvanized Zn-0.05Al-0.2Sb coating in 3.5 wt.% NaCl solution

Shu Peng et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Macro-galvanic effect and its influence on corrosion behaviors of friction stir welding joint of 7050-T76 Al alloy

Yong Chen et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Manipulating graphene oxide nanocontainer with benzimidazole and cerium ions: Application in epoxy-based nanocomposite for active corrosion protection

Ali Asghar Javidparvar et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Engineering, Mechanical

Fatigue properties of steel to aluminum transition joints produced by explosion welding

Nicolas Becker et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Manufacturing

Microstructure inhomogeneity of dissimilar steel/Al butt joints produced by laser offset welding

Li Cui et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Galvanic and asymmetry effects on the local electrochemical behavior of the 2098-T351 alloy welded by friction stir welding

Mariana X. Milagre et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion and discharge performance of a magnesium aluminum eutectic alloy as anode for magnesium-air batteries

Jingling Ma et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Engineering, Industrial

Influence of energy ratio on dual-spot laser welded-brazed Al/steel butt joint

Hongbo Xia et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure induced galvanic corrosion evolution of SAC305 solder alloys in simulated marine atmosphere

Mingna Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A comparative study of corrosion behavior of an additively manufactured Al-6061 RAM2 with extruded Al-6061 T6

Hamidreza Torbati-Sarraf et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dealloying-driven local corrosion by intermetallic constituent particles and dispersoids in aerospace aluminium alloys

A. Kosari et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Electrochemistry

Variations of galvanic currents and corrosion forms of 2024/Q235/304 tri-metallic couple with multivariable cathode/anode area ratios: Experiments and modeling

Linjun Shi et al.

ELECTROCHIMICA ACTA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of corrosive media on galvanic corrosion of complicated tri-metallic couples of 2024 Al alloy/Q235 mild steel/304 stainless steel

Linjun Shi et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Industrial

Integrity of 5052 Al-mild steel dissimilar welds fabricated using MIG-brazing and cold metal transfer in nitric acid medium

S. S. Sravanthi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Carbon dots as effective corrosion inhibitor for 5052 aluminium alloy in 0.1 M HCl solution

Hongyu Cen et al.

CORROSION SCIENCE (2019)

添加到收藏夹

Article Electrochemistry

Effect of unequal levels of deformation and fragmentation on the electrochemical response of friction stir welded AA2024-T3 alloy

Fernanda Martins Queiroz et al.

ELECTROCHIMICA ACTA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanistic study on the cut-edge corrosion behaviors of Zn-Al-Mg alloy coated steel sheets in chloride containing environments

Jae-Won Lee et al.

CORROSION SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of Microstructure on the Corrosion Resistance of TIG Welded 1579 Alloy

Andrey S. Gnedenkov et al.

MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Performance of Mg-Sn surface alloys for the sacrificial cathodic protection of Mg alloy AZ31B-H24

C. F. Glover et al.

CORROSION SCIENCE (2019)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Studies on galvanic corrosion of tri-metallic joint of steels in sodium chloride solution

Liyakhath Ahmed Shaik et al.

MATERIALS TODAY-PROCEEDINGS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Influence of Al additions in Zn-based filler metals on laser welding-brazing of Al/steel

Caiwang Tan et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Welding Parameters on the Corrosion Behavior of Dissimilar Alloy Welds of T6 AA6061 Al-Galvanized Mild Steel

S. S. Sravanthi et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

添加到收藏夹

Article Chemistry, Physical

Corrosion of the Welded Aluminium Alloy in 0.5 M NaCl Solution. Part 1: Specificity of Development

Andrey S. Gnedenkov et al.

MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Corrosion of the Welded Aluminium Alloy in 0.5 M NaCl Solution. Part 2: Coating Protection

Andrey S. Gnedenkov et al.

MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion behavior and mechanical properties of Al-Zn-Mg aluminum alloy weld

Shuai Li et al.

CORROSION SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion behaviour of hot-dip Al-Zn-Si and Al-Zn-Si-3Mg coatings in NaCl solution

Wei Liu et al.

CORROSION SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion inhibition synergies on a model Al-Cu-Mg, sample studied by localized scanning electrochemical techniques

Darya Snihirova et al.

CORROSION SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

The Al-Rich Part of the Fe-Al Phase Diagram

Xiaolin Li et al.

JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemical investigation on steel corrosion in iron-rich clay

Maocheng Yan et al.

CORROSION SCIENCE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Chemical modification of hydrotalcite coating for enhanced corrosion resistance

Lida Wang et al.

CORROSION SCIENCE (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Control of interfacial intermetallic compounds in Fe-Al joining by Zn addition

J. Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Automation & Control Systems

Experimental investigations on the microhole machining of 304 stainless steel by micro-EDM process using RC-type pulse generator

N. Natarajan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Article Electrochemistry

Electrochemical Characterization of Intermetallic Phases Common to Aluminum Alloys as a Function of Solution Temperature

M. K. Cavanaugh et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemical and Initial Corrosion Behavior of Ultrahigh Strength Steel by Scanning Kelvin Probe

Min Sun et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Combination Effects of Nocolok Flux with Ni Powder on Properties and Microstructures of Aluminum-Stainless Steel TIG Welding-Brazing Joint

Huan He et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)

添加到收藏夹

Article Engineering, Industrial

Dissimilar metal joining of aluminum alloy to galvanized steel with Al-Si, Al-Cu, Al-Si-Cu and Zn-Al filler wires

Honggang Dong et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

FEM prediction of welding residual stresses in a SUS304 girth-welded pipe with emphasis on stress distribution near weld start/end location

Dean Deng et al.

COMPUTATIONAL MATERIALS SCIENCE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Potential and current distributions of one-dimensional galvanic corrosion systems

Guang-Ling Song

CORROSION SCIENCE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

A newly synthesized glycine derivative to control uniform and pitting corrosion processes of Al induced by SCN- anions - Chemical, electrochemical and morphological studies

Mohammed A. Amin

CORROSION SCIENCE (2010)

添加到收藏夹

Article Electrochemistry

Determination of effective capacitance and film thickness from constant-phase-element parameters

Bryan Hirschorn et al.

ELECTROCHIMICA ACTA (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of temperature on the galvanic corrosion of a high alloyed austenitic stainless steel in its welded and non-welded condition in LiBr solutions

E. Blasco-Tamarit et al.

CORROSION SCIENCE (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

NaCl-induced accelerated oxidation of 304 stainless steel and Fe-Mn-Al alloy at 900°C

JW Lee et al.

JOURNAL OF MATERIALS SCIENCE (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Technical note:: Concerning the conversion of the constant phase element parameter Y0 into a capacitance

CH Hsu et al.

CORROSION (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

A comparison between conventional macroscopic and novel microscopic scanning electrochemical methods to evaluate galvanic corrosion

R Akid et al.

CORROSION SCIENCE (2001)

添加到收藏夹

Galvanic corrosion of AA5052/304SS welded joint with Zn-based filler metal in marine engineering

相关参考文献

导出引文

分享论文