4.4 Article

Oxidation Behavior of Si-Modified Aluminide Coatings on K438 Superalloy Prepared Using a Hybrid Slurry/Pack Cementation Process

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Coatings & Films

Effect of Cr nanoparticle dispersions with various contents on the oxidation and phase transformation of alumina scale formation on Ni2Al3 coating

Azim Khan et al.

Summary: By adding Cr nanoparticle dispersions in Ni2Al3 coating, the oxidation rate can be reduced and the transformation of 0-into-alpha phase can be promoted. Increasing the content of Cr nanoparticle dispersions also accelerates the phase transformation and reduces cavity formation.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

Thermally grown oxide formation on Ni2Al3 aluminide coating: The effect of nanocrystalline nickel film on oxide scale adhesion

A. Khan et al.

Summary: The study found that the addition of nanocrystalline nickel film in the Ni2Al3 coatings prepared by pack cementation process can effectively control the particle formation during oxidation, leading to improved adhesion between the alumina scale and aluminide.

VACUUM (2022)

Article Metallurgy & Metallurgical Engineering

Interdiffusion Behaviour of Silicon-Modified Aluminide Coating in Atmospheres Containing Water Vapour at 1050 °C

Chao Li et al.

Summary: Si-modified aluminide coatings were oxidised in different atmospheres, and the relationship between grain size and interdiffusion behavior was investigated. The results showed that the presence of water vapor accelerated the grain growth and led to severe internal oxidation. High aluminum depletion also resulted in grain growth and the formation of Ti-rich particles containing silicon.

OXIDATION OF METALS (2022)

Article Metallurgy & Metallurgical Engineering

Exploring the Effect of Silicon on the High Temperature Corrosion of Lean FeCrAl Alloys in Humid Air

T. Sand et al.

Summary: This paper investigates the effect of silicon on the oxidation behavior of FeCrAl alloys, showing that the corrosion resistance can be improved by the appearance of Si-rich phases in the oxide scale.

OXIDATION OF METALS (2021)

Article Metallurgy & Metallurgical Engineering

Effects of Minor Alloying Elements on Alumina Transformation During the Transient Oxidation of β-NiAl

Talia L. Barth et al.

Summary: The study shows that different dopant elements (such as Ti, Si, Y) have varied effects on the transient oxidation of alumina-forming alloys. During the transient stage, Ti and Si accelerate the oxidation process through different mechanisms, while Y has relatively little effect on the transformation process.

OXIDATION OF METALS (2021)

Article Materials Science, Multidisciplinary

A comprehensive investigation of phase evolution of Al-Si coating during the prolonged aging at 650 °C

Zhiyu Zhao et al.

Summary: The microstructural evolution of silicon-modified aluminide coating during aging at 650 degrees C for 10,000 hours was systematically studied. The coating transformed from a multilayered to a double-layer structure, with internal oxide layer formed below the coating and increased thickness of interdiffusion zone (IDZ). Discussion on precipitate evolutions in both the coating and IDZ clarified the microstructural origin of long-term stability.

CORROSION SCIENCE (2021)

Article Metallurgy & Metallurgical Engineering

Oxidation and hot corrosion behavior of a directionally solidified W richen cobalt-based superalloy

Yuebo Zhou et al.

Summary: The study found that the isothermal oxidation of Co-based superalloy forms a Co-oxide dispersion chromia scale, while K38G forms a purer chromia scale. Under molten Na2SO4-NaCl salts, defects in the Ni/Co oxide dispersion chromia layer can lead to penetration of the salt along grain boundaries to form internal sulfides, causing a decrease in hot corrosion resistance.

METALLURGICAL RESEARCH & TECHNOLOGY (2021)

Article Engineering, Mechanical

Failure analysis of gas turbine burner tips

S. S. Pelaseyed et al.

ENGINEERING FAILURE ANALYSIS (2019)

Article Metallurgy & Metallurgical Engineering

The Oxidation Behavior of Ni-15Cr-5Al-xSi (x=0, 1, 3, 5 wt%) Alloys in Air at 1100 °C

Erpeng Wang et al.

OXIDATION OF METALS (2019)

Article Materials Science, Coatings & Films

Development of a new slurry coating design for the surface protection of gas turbine components

Benjamin Gregoire et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Metallurgy & Metallurgical Engineering

Effect of Si and Y2O3 Additions on the Oxidation Behavior of Ni-xAl (x=5 or 10 wt%) Alloys at 1150 °C

Weizhou Li et al.

OXIDATION OF METALS (2018)

Article Materials Science, Multidisciplinary

Microstructure of Al-Si Slurry Coatings on Austenitic High-Temperature Creep Resisting Cast Steel

Agnieszka E. Kochmanska

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)

Article Materials Science, Multidisciplinary

The promoted formation of an α-Al2O3 scale on a nickel aluminide with surface Cr2O3 particles

Y. Huang et al.

CORROSION SCIENCE (2016)

Article Materials Science, Multidisciplinary

Microstructure and hot corrosion behavior of Co-Si modified aluminide coating on nickel based superalloys

Haiyan He et al.

CORROSION SCIENCE (2015)

Article Materials Science, Multidisciplinary

A Novel Type of Environmentally Friendly Slurry Coatings

Xabier Montero et al.

Article Materials Science, Multidisciplinary

The effect of grain refinement on the adhesion of an alumina scale on an aluminide coating

X. Tan et al.

CORROSION SCIENCE (2014)

Article Materials Science, Coatings & Films

Microstructure and oxidation behavior of Al plus Si co-deposited coatings on nickel-based superalloys

C. Fu et al.

SURFACE & COATINGS TECHNOLOGY (2014)

Article Chemistry, Physical

The effect of silicon on the oxidation behavior of NiAlHf coating system

Pengchao Dai et al.

APPLIED SURFACE SCIENCE (2013)

Article Metallurgy & Metallurgical Engineering

Sulphidation Behavior of a Non Harmful Water-Based Al and Al-Si Slurry Coating on CM247 Superalloy

X. Montero et al.

OXIDATION OF METALS (2013)

Article Materials Science, Coatings & Films

The mechanism for self-formation of a CeO2 diffusion barrier layer in an aluminide coating at high temperature

X. Tan et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Article Materials Science, Multidisciplinary

A novel ultrafine-grained Ni3Al with increased cyclic oxidation resistance

X. Peng et al.

CORROSION SCIENCE (2011)

Article Metallurgy & Metallurgical Engineering

Al, Si, and Al-Si Coatings to Improve the High-Temperature Oxidation Resistance of AISI 304 Stainless Steel

Morteza Zandrahimi et al.

OXIDATION OF METALS (2011)

Article Materials Science, Multidisciplinary

Cyclic oxidation of an ultrafine-grained and CeO2-dispersed δ-Ni2Al3 coating

C. Xu et al.

CORROSION SCIENCE (2010)

Article Materials Science, Multidisciplinary

Aluminizing of Nickel-Based Superalloys Grade IN 738 by Powder Liquid Coating

Patama Visuttipitukul et al.

MATERIALS TRANSACTIONS (2010)

Article Materials Science, Coatings & Films

Oxidation and hot corrosion behavior of a novel enamel-Al2O3 composite coating on K38G superalloy

DY Zheng et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Article Metallurgy & Metallurgical Engineering

The effect of silicon on the oxidation of a Ni-6 at.% Al alloy in 1 atm of pure O2 at 900°C

Y. Wu et al.

OXIDATION OF METALS (2006)

Article Materials Science, Multidisciplinary

Coatings for gas turbine materials and long term stability issues

MJ Pomeroy

MATERIALS & DESIGN (2005)

Article Materials Science, Multidisciplinary

The structure and high temperature corrosion behavior of pack aluminized coatings on superalloy IN-738LC

CH Koo et al.

MATERIALS CHEMISTRY AND PHYSICS (2004)

Article Nanoscience & Nanotechnology

The aluminizing and Al-Si codeposition on AISI HP alloy and the evaluation of their carburizing resistance

KL Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Article Materials Science, Multidisciplinary

The role of silicon on microstructure and high temperature performance of aluminide coating on superalloy In-738LC

K Shirvani et al.

MATERIALS TRANSACTIONS (2002)