4.7 Article

Bond behavior of CFRP-to-steel bonded joints at different service temperatures: Experimental study and FE modeling

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Effect of temperature variation on the plate-end debonding of FRP-strengthened beams: A theoretical study

Dong Guo et al.

Summary: This study investigates the plate-end debonding failure in FRP-strengthened beams subjected to thermal and mechanical loading, using a bilinear bond-slip model to describe the bond behavior at the FRP-to-substrate interface. The results show that an increase in service temperature leads to increased interfacial slip at the plate end, resulting in a reduced plate-end debonding load.

ADVANCES IN STRUCTURAL ENGINEERING (2022)

Article Mechanics

Effects of temperature variation on intermediate crack-induced debonding and stress intensity factor in FRP-retrofitted cracked steel beams: An analytical study

Dong Guo et al.

Summary: This paper presents an analytical solution for the full-range debonding process of an FRP-retrofitted steel beam under combined thermal and mechanical loading. The effect of thermal stress on the IC debonding load and SIF at the notch is examined, showing that a temperature decrease may lead to a reduced IC debonding load and increased SIF. Results indicate that the effect is more significant with a thicker and stiffer FRP plate applied for retrofitting the steel beam.

COMPOSITE STRUCTURES (2022)

Article Mechanics

Debonding analysis of FRP-to-concrete interfaces between two adjacent cracks in plated beams under temperature variations

Hao Zhou et al.

Summary: This paper presents an analytical study on the full-range deformation behavior of the FRP-to-concrete interface between two adjacent cracks under combined mechanical and thermal loadings. The results indicate that the thermal loadings significantly influence the behavior of the bond interface and the ultimate load.

ENGINEERING FRACTURE MECHANICS (2022)

Article Mechanics

Full-range behavior of FRP-to-concrete bonded joints subjected to combined effects of loading and temperature variation

Dong-Ge Jia et al.

Summary: Concrete structures strengthened with externally bonded fiber-reinforced polymer (FRP) composites are likely to experience significant temperature variations due to daily and seasonal temperature changes or possible fire exposure during service life. This paper presents an analytical study for the first time to predict the full-range deformation behavior of a mechanically loaded FRP-to-concrete bonded joint with a limited bond length under temperature variations. The closed-form analytical solution has enabled isolation of the interfacial thermal stress effect from the temperature-induced changes of material properties, thereby leading to an accurate calibration of the bond-slip characteristics and the interfacial fracture energy.

ENGINEERING FRACTURE MECHANICS (2021)

Article Construction & Building Technology

Effect of moderately elevated temperatures on bond behaviour of CFRP-to-steel bonded joints using different adhesives

Jun He et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Engineering, Civil

Bond Behavior of CFRP-to-Steel Bonded Joints at Mild Temperatures: Experimental Study

Hao Zhou et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2020)

Article Mechanics

The influence of temperature variations on adhesively bonded structures: A non-linear theoretical perspective

Hugo C. Biscaia

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2019)

Article Mechanics

A temperature-dependent bond-slip model for CFRP-to-steel joints

Hugo C. Biscaia et al.

COMPOSITE STRUCTURES (2019)

Article Construction & Building Technology

On factors affecting CFRP-steel bonded joints

Manuel A. G. Silva et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Mechanics

Mechanical characterization of CFRP/steel bond cured and tested at elevated temperature

E. R. K. Chandrathilaka et al.

COMPOSITE STRUCTURES (2019)

Article Engineering, Civil

Three-Level Fire Resistance Design of FRP-Strengthened RC Beams

W. Y. Gao et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)

Article Construction & Building Technology

Fire resistance of RC beams under design fire exposure

Wan-Yang Gao et al.

MAGAZINE OF CONCRETE RESEARCH (2017)

Article Construction & Building Technology

Bond characteristics of CFRP-to-steel joints

Yongming Yang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

Article Engineering, Multidisciplinary

Development of bond strength model for CFRP-to-concrete joints at high temperatures

Kun Dong et al.

COMPOSITES PART B-ENGINEERING (2016)

Article Engineering, Civil

Experimental Investigation of Bond between High-Modulus CFRP and Steel at Moderately Elevated Temperatures

Mehmet Ugur Sahin et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2016)

Article Construction & Building Technology

Fire resistance design of un-protected FRP-strengthened RC beams

Wan-Yang Gao et al.

MATERIALS AND STRUCTURES (2016)

Article Engineering, Multidisciplinary

Fire behaviour of FRP-strengthened reinforced concrete structural elements: A state-of-the-art review

Joao P. Firmo et al.

COMPOSITES PART B-ENGINEERING (2015)

Article Engineering, Multidisciplinary

Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: State of the art

Mohsen Heshmati et al.

COMPOSITES PART B-ENGINEERING (2015)

Article Engineering, Multidisciplinary

Fatigue crack growth in CFRP-strengthened steel plates

Pierluigi Colombi et al.

COMPOSITES PART B-ENGINEERING (2015)

Article Engineering, Civil

Finite Element Modeling of Insulated FRP-Strengthened RC Beams Exposed to Fire

Jian-Guo Dai et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

Article Engineering, Civil

Simple Method for Predicting Temperatures in Insulated, FRP-Strengthened RC Members Exposed to a Standard Fire

W. Y. Gao et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

Article Construction & Building Technology

Effect of discrepancy in thermal expansion coefficients of CFRP and steel under cold temperature

Isamu Yoshitake et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Development of a simplified bond stress-slip model for bonded FRP-concrete interfaces

Hunebum Ko et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Engineering, Civil

The effect of elevated temperature on the bond between high modulus carbon fibre-reinforced polymer sheet and steel

H. B. Liu et al.

AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING (2014)

Article Engineering, Multidisciplinary

Adhesive rheology impact on wet lay-up CFRP/steel joints' behaviour under infrastructural subzero exposures

Ahmed Al-Shawaf et al.

COMPOSITES PART B-ENGINEERING (2013)

Review Construction & Building Technology

A review on steel/CFRP strengthening systems focusing environmental performance

Mehran Gholami et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Engineering, Civil

Bond-Slip Model for FRP Laminates Externally Bonded to Concrete at Elevated Temperature

Jian-Guo Dai et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2013)

Article Engineering, Civil

Preparation and Characterization of Steel Surfaces for Adhesive Bonding

D. Fernando et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2013)

Article Engineering, Multidisciplinary

Experimental study on CFRP-to-steel bonded interfaces

T. Yu et al.

COMPOSITES PART B-ENGINEERING (2012)

Article Engineering, Civil

Effect of Warm Temperatures on Externally Bonded FRP Strengthening

T. J. Stratford et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2012)

Review Construction & Building Technology

Strengthening of steel structures with fiber-reinforced polymer composites

J. G. Teng et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2012)

Article Mechanics

Mechanical characterization of steel/CFRP double strap joints at elevated temperatures

Tien-Cuong Nguyen et al.

COMPOSITE STRUCTURES (2011)

Article Engineering, Civil

Effect of elevated temperature on bond behaviour of high modulus CFRP/steel double-strap joints

A. Al-Shawaf et al.

AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING (2009)

Article Engineering, Civil

State-of-the-art review on FRP strengthened steel structures

Xiao-Ling Zhao et al.

ENGINEERING STRUCTURES (2007)

Article Construction & Building Technology

FRP confined concrete columns: Behaviour under extreme conditions

Mark F. Green et al.

CEMENT & CONCRETE COMPOSITES (2006)

Article Mechanics

Behavior of adhesively bonded concrete-CFRP joints at low and high temperatures

A Di Tommaso et al.

MECHANICS OF COMPOSITE MATERIALS (2001)

Article Engineering, Chemical

Fractal analysis of surfaces roughened by grit blasting

S Amada et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2000)