4.7 Article

Roles of recycled fine aggregate and carbonated recycled fine aggregate in alkali-activated slag and glass powder mortar

期刊

CONSTRUCTION AND BUILDING MATERIALS
卷 364, 期 -, 页码 -

出版社

ELSEVIER SCI LTD
DOI: 10.1016/j.conbuildmat.2022.129876

关键词

Recycled fine aggregate; Carbonation; Alkali -activated mortar; Compressive strength; Shrinkage

向作者/读者索取更多资源

This study investigates the effects of using recycled fine aggregate (RFA) and carbonated recycled fine aggregate (CRFA) on the properties of alkali-activated slag and glass powder mortar (AASGM). The results show that the use of RFA increases the flow value and compressive strength of AASGM, while the use of CRFA has the opposite effect. This is due to the different reaction mechanisms between RFA/CRFA and sodium silicate.
Alkali-activated materials have attracted a lot of research interest due to the advantage of less CO2 emission than ordinary Portland cement (OPC) systems. The use of recycled aggregate or carbonated recycled aggregate in new concrete is considered a good way to solve the problem of construction and demolition waste. This study aims to investigate the influences of recycled fine aggregate (RFA) and carbonated RFA (CRFA) on the properties of alkali-activated slag and glass powder mortar (AASGM). The macro properties (compressive strength, work-ability, setting time, and shrinkage) and microstructural properties of AASGMs prepared with RFA/CRFA were evaluated. The hydration evolutions of AASGMs and the reactions between RFA/CRFA and sodium silicate were investigated to explore the reaction mechanisms of AASGM with RFA/CRFA. The results showed that with the increase in RFA content from 0 % to 100 %, the flow value of AASGM decreased from 240 mm to 145 mm, the initial setting time was shortened by 44 %, the 7 days autogenous shrinkage decreased by 82 %, the 25 days drying shrinkage decreased by 31 %, and the 28 days compressive strength firstly increased (RFA content <= 50 %) and then decreased. On the contrary, with the increase in CRFA content from 0 % to 100 %, the flow value of AASGM increased from 240 mm to 270 mm, the final setting time increased by 37 %, and the compressive strength decreased by 97 %. The roles of RFA and CRFA in AASGM were different from their roles in OPC-based materials. That was because the calcium hydroxide in RFA could react with sodium silicate (SS) and increase the concentration of alkali, which accelerated the polymerization reaction of AASGM. However, the calcium car-bonate and silica gel in CRFA reacted with SS and reduced the concentration of alkali, and thus the polymeri-zation reaction of AASGM was decelerated.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据