☆ 4.7 Article

Intermediate crack-induced debonding in CFRP-retrofitted notched steel beams at different service temperatures: Experimental test and finite element modeling

COMPOSITE STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Effect of temperature variation on the plate-end debonding of FRP-strengthened beams: A theoretical study

Dong Guo et al.

Summary: This study investigates the plate-end debonding failure in FRP-strengthened beams subjected to thermal and mechanical loading, using a bilinear bond-slip model to describe the bond behavior at the FRP-to-substrate interface. The results show that an increase in service temperature leads to increased interfacial slip at the plate end, resulting in a reduced plate-end debonding load.

ADVANCES IN STRUCTURAL ENGINEERING (2022)

添加到收藏夹

Article Mechanics

Effects of temperature variation on intermediate crack-induced debonding and stress intensity factor in FRP-retrofitted cracked steel beams: An analytical study

Dong Guo et al.

Summary: This paper presents an analytical solution for the full-range debonding process of an FRP-retrofitted steel beam under combined thermal and mechanical loading. The effect of thermal stress on the IC debonding load and SIF at the notch is examined, showing that a temperature decrease may lead to a reduced IC debonding load and increased SIF. Results indicate that the effect is more significant with a thicker and stiffer FRP plate applied for retrofitting the steel beam.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Fatigue behavior of notched steel beams strengthened by a prestressed CFRP plate subjected to wetting/drying cycles

Jun Deng et al.

Summary: The study derived the interfacial energy release rate at the notch location for strengthened steel beams and found that prestressed CFRP strengthening significantly reduces interfacial crack propagation, thereby improving fatigue performance. Experimental results showed that prestressed CFRP strengthening increases fatigue resistance, while wetting/drying cycle exposure decreases fatigue life.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Mechanics

Debonding analysis of FRP-to-concrete interfaces between two adjacent cracks in plated beams under temperature variations

Hao Zhou et al.

Summary: This paper presents an analytical study on the full-range deformation behavior of the FRP-to-concrete interface between two adjacent cracks under combined mechanical and thermal loadings. The results indicate that the thermal loadings significantly influence the behavior of the bond interface and the ultimate load.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Mechanics

Effect of temperature variation on the plate-end debonding of FRP-strengthened steel beams: Coupled mixed-mode cohesive zone modeling

Dong Guo et al.

Summary: This paper proposes a closed-form analytical solution based on a coupled mixed-mode cohesive zone model to analyze the effect of thermal stress on the debonding failure of FRP-strengthened steel beams. The analytical solution achieves excellent agreement with finite element modeling and further parametric studies indicate that thermal stresses tend to reduce the plate-end debonding load, especially when a thicker FRP plate is used.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Civil

Effects of adhesive property and thickness on the bond performance between carbon fiber reinforced polymer laminate and steel

Zhen Wang et al.

Summary: This paper investigates the bond performance of CFRP-steel using a single lap shear test, focusing on the impact of adhesive toughness and bonding thickness. The study finds that for tough adhesives, increasing bonding thickness improves fracture energy but reduces interface stiffness, while the effects of bonding thickness on brittle adhesives are negligible. Key parameters for bond-slip models of tough and brittle adhesives in delamination of CFRP laminate are determined based on experimental and literature results.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Construction & Building Technology

Mechanical behavior of large-rupture-strain (LRS) polyethylene naphthalene fiber bundles at different strain rates and temperatures

Yu-Lei Bai et al.

Summary: This experimental study investigated the impact of strain rate and temperature on the tensile mechanical properties of PEN fiber bundles. Results showed that tensile strength and elastic modulus increased with strain rate, while failure strain decreased. Additionally, the effects of temperature on tensile strength, toughness, and failure strain were not consistent from -50°C to 50°C.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Mechanics

Full-range behavior of FRP-to-concrete bonded joints subjected to combined effects of loading and temperature variation

Dong-Ge Jia et al.

Summary: Concrete structures strengthened with externally bonded fiber-reinforced polymer (FRP) composites are likely to experience significant temperature variations due to daily and seasonal temperature changes or possible fire exposure during service life. This paper presents an analytical study for the first time to predict the full-range deformation behavior of a mechanically loaded FRP-to-concrete bonded joint with a limited bond length under temperature variations. The closed-form analytical solution has enabled isolation of the interfacial thermal stress effect from the temperature-induced changes of material properties, thereby leading to an accurate calibration of the bond-slip characteristics and the interfacial fracture energy.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Review Energy & Fuels

Systematic literature review of the application of extended finite element method in failure prediction of pipelines

M. M. Shahzamanian et al.

Summary: Ground movements in arctic regions from freezing and thawing can cause pipeline failures with factors like internal pressure, geometry, corrosion, and pre-existing dents speeding up the process. Various methods, including XFEM, are used to predict and study these failure processes, with XFEM being considered the most efficient for crack propagation. Research has shown that XFEM simulations align well with experiments, accurately predict crack propagation, and efficiently study the effects of parameters on pipeline crack propagation.

JOURNAL OF PIPELINE SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Effects of elevated temperatures on mechanical behavior of epoxy adhesives and CFRP-steel hybrid joints

Lu Ke et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Tensile strength of Q345 steel with random pitting corrosion based on numerical analysis

Zhongwei Zhao et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Simulation of Crack Propagation in API 5L X52 Pressurized Pipes Using XFEM-Based Cohesive Segment Approach

Meng Lin et al.

JOURNAL OF PIPELINE SYSTEMS ENGINEERING AND PRACTICE (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Crack propagation and burst pressure of longitudinally cracked pipelines using extended finite element method

Allan Okodi et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2020)

添加到收藏夹

Article Engineering, Mechanical

Development of a Tensile Strain Capacity Predictive Model for American Petroleum Institute 5L X42 Welded Vintage Pipelines

Sylvester Agbo et al.

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2020)

添加到收藏夹

Article Engineering, Civil

Sub-zero temperature mechanical properties of cold-rolled steel sheets

M. Rokilan et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Bond Behavior of CFRP-to-Steel Bonded Joints at Mild Temperatures: Experimental Study

Hao Zhou et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2020)

添加到收藏夹

Article Construction & Building Technology

Study of the influence of interface normal stresses on the bond behavior of FRCM composites using direct shear and modified beam tests

Angelo Savio Calabrese et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Civil

The bond behaviour of CFRP-to-steel bonded joints with varying bond properties at elevated temperatures

Hao Zhou et al.

ENGINEERING STRUCTURES (2019)

添加到收藏夹

Article Mechanics

The influence of temperature variations on adhesively bonded structures: A non-linear theoretical perspective

Hugo C. Biscaia

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2019)

添加到收藏夹

Article Engineering, Chemical

Experimental study on steel plates with and without notches strengthened by CFRP sheets

Yi Wang et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Mechanics

Fatigue tests on edge cracked four-point bend steel specimens repaired by CFRP

Tao Chen et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Mechanics

A temperature-dependent bond-slip model for CFRP-to-steel joints

Hugo C. Biscaia et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Mechanics

Mechanical characterization of CFRP/steel bond cured and tested at elevated temperature

E. R. K. Chandrathilaka et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Estimation of the CTOD-crack growth curves in SENT specimens using the eXtended finite element method

Iman Ameli et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2019)

添加到收藏夹

Article Engineering, Chemical

Numerical study on notched steel plate with center hole strengthened by CFRP

Yi Wang et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Mechanics

Interfacial behavior and debonding failures of full-scale CFRP-strengthened H-section steel beams

Jun-Jie Zeng et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Effect of load distribution on IC debonding in FRP-strengthened RC beams: Full-scale experiments

B. Fu et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Experimental study on the bond behaviour of a transversely compressed mechanical anchorage system for externally bonded reinforcement

Cristina Barris et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Fatigue retrofitting of cracked steel beams with CFRP laminates

Qian-Qian Yu et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Construction & Building Technology

Numerical study on notched steel beams strengthened by CFRP plates

Jun Deng et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Civil

Intermediate crack induced debonding in steel beams reinforced with CFRP plates under fatigue loading

Massimiliano Bocciarelli et al.

ENGINEERING STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

A closed-form solution of the interfacial stresses and strains in steel beams strengthened with externally bonded plates using ductile adhesives

Meng Liu et al.

ENGINEERING STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Bond behaviour of CFRP/steel strap joints exposed to overloading fatigue and wetting/drying cycles

Yi Wang et al.

ENGINEERING STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Three-Level Fire Resistance Design of FRP-Strengthened RC Beams

W. Y. Gao et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)

添加到收藏夹

Article Engineering, Marine

Experimental study on generalized constitutive model of hull structural plate with multi-parameter pitting corrosion

Yuan Yao et al.

OCEAN ENGINEERING (2018)

添加到收藏夹

Article Engineering, Civil

Fatigue Strengthening of Cracked Steel Beams with Different Configurations and Materials

Qian-Qian Yu et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2017)

添加到收藏夹

Article Construction & Building Technology

Bond characteristics of CFRP-to-steel joints

Yongming Yang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

添加到收藏夹

Article Mechanics

Debonding of CFRP-to-steel joints with CFRP delamination

Jun He et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Theoretical and experimental study on notched steel beams strengthened with CFRP plate

Jun Deng et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Energy-based analytical formulation for the prediction of end debonding in strengthened steel beams

Massimiliano Bocciarelli et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

A nonlinear analytical model to predict the full-range debonding process of FRP-to-parent material interfaces free of any mechanical anchorage devices

Hugo C. Biscaia et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Failure of CFRP-to-steel double strap joint bonded using carbon nanotubes modified epoxy adhesive at moderately elevated temperatures

Asghar H. Korayem et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Development of bond strength model for CFRP-to-concrete joints at high temperatures

Kun Dong et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Mechanics

Prediction of crack initiation and propagation in X70 pipeline steels

Marcelo Paredes et al.

ENGINEERING FRACTURE MECHANICS (2016)

添加到收藏夹

Article Engineering, Civil

Experimental Investigation of Bond between High-Modulus CFRP and Steel at Moderately Elevated Temperatures

Mehmet Ugur Sahin et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2016)

添加到收藏夹

Article Construction & Building Technology

Fire resistance design of un-protected FRP-strengthened RC beams

Wan-Yang Gao et al.

MATERIALS AND STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Crack initiation and propagation in ductile specimens with notches: experimental and numerical study

Alessandro Schiavone et al.

ACTA MECHANICA (2016)

添加到收藏夹

Article Construction & Building Technology

Experimental characterization of the bond between externally bonded reinforcement (EBR) CFRP strips and concrete at elevated temperatures

J. P. Firmo et al.

CEMENT & CONCRETE COMPOSITES (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical modelling of the effects of elevated service temperatures on the debonding process of FRP-to-concrete bonded joints

Hugo C. Biscaia et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Glass transition evaluation of commercially available epoxy resins used for civil engineering applications

Julien Michels et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: State of the art

Mohsen Heshmati et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Fatigue crack growth in CFRP-strengthened steel plates

Pierluigi Colombi et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Mechanics

Analysis of Mode II debonding behavior of fiber-reinforced polymer-to-substrate bonded joints subjected to combined thermal and mechanical loading

Wan-Yang Gao et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Article Mechanics

Experimental study on the fatigue behaviour of cracked steel beams repaired with CFRP plates

Pierluigi Colombi et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Article Engineering, Civil

Finite element modelling of debonding failures in steel beams flexurally strengthened with CFRP laminates

J. G. Teng et al.

ENGINEERING STRUCTURES (2015)

添加到收藏夹

Article Engineering, Civil

Finite Element Modeling of Insulated FRP-Strengthened RC Beams Exposed to Fire

Jian-Guo Dai et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

添加到收藏夹

Article Engineering, Civil

Simple Method for Predicting Temperatures in Insulated, FRP-Strengthened RC Members Exposed to a Standard Fire

W. Y. Gao et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Adhesive rheology impact on wet lay-up CFRP/steel joints' behaviour under infrastructural subzero exposures

Ahmed Al-Shawaf et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Mechanics

Coupled mixed-mode cohesive zone modeling of interfacial debonding in simply supported plated beams

Laura De Lorenzis et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

添加到收藏夹

Article Engineering, Civil

Bond-Slip Model for FRP Laminates Externally Bonded to Concrete at Elevated Temperature

Jian-Guo Dai et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2013)

添加到收藏夹

Article Engineering, Civil

Preparation and Characterization of Steel Surfaces for Adhesive Bonding

D. Fernando et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental study on CFRP-to-steel bonded interfaces

T. Yu et al.

COMPOSITES PART B-ENGINEERING (2012)

添加到收藏夹

Article Engineering, Civil

A new bond-slip model for adhesive in CFRP-steel composite systems

E. Dehghani et al.

ENGINEERING STRUCTURES (2012)

添加到收藏夹

Article Engineering, Civil

Effect of Warm Temperatures on Externally Bonded FRP Strengthening

T. J. Stratford et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2012)

添加到收藏夹

Review Construction & Building Technology

Strengthening of steel structures with fiber-reinforced polymer composites

J. G. Teng et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Finite Element Analysis of Plastic Collapse and Crack Behavior of Steel Pressure Vessels and Piping Using XFEM

P. F. Liu et al.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2012)

添加到收藏夹

Article Mechanics

Mechanical characterization of steel/CFRP double strap joints at elevated temperatures

Tien-Cuong Nguyen et al.

COMPOSITE STRUCTURES (2011)

添加到收藏夹

Article Engineering, Civil

CFRP Repair of Steel Beams with Various Initial Crack Configurations

Amer Hmidan et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2011)

添加到收藏夹

Article Engineering, Civil

Effect of elevated temperature on bond behaviour of high modulus CFRP/steel double-strap joints

A. Al-Shawaf et al.

AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING (2009)

添加到收藏夹

Article Materials Science, Characterization & Testing

Temperature-dependent elastic moduli of epoxies measured by DMA and their correlations to mechanical testing data

Shiqiang Deng et al.

POLYMER TESTING (2007)

添加到收藏夹

Article Mechanics

Behaviour under static loading of metallic beams reinforced with a bonded CFRP plate

Jun Deng et al.

COMPOSITE STRUCTURES (2007)

添加到收藏夹

Article Mechanics

Cohesive zone model of intermediate crack-induced debonding of FRP-plated concrete beam

Jialai Wang

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)

添加到收藏夹

Article Construction & Building Technology

Calculation of the strain hardening behaviour of steel structures based on mill tests

MP Byfield et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2005)

添加到收藏夹

Article Mechanics

Stress analysis of steel beams reinforced with a bonded CFRP plate

J Deng et al.

COMPOSITE STRUCTURES (2004)

添加到收藏夹

Article Engineering, Civil

Interfacial stresses in plated beams

ST Smith et al.

ENGINEERING STRUCTURES (2001)

添加到收藏夹

Article Engineering, Chemical

Fractal analysis of surfaces roughened by grit blasting

S Amada et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.