☆ 4.7 Article

Buckling induced negative stiffness mechanical metamaterial for bandgap tuning

COMPOSITE STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Physics, Multidisciplinary

Chiral and non-centrosymmetric effects on the nonlinear wave propagation characteristics of architectured cellular materials

N. Karathanasopoulos et al.

Summary: This work investigates the impact of chirality and non-centrosymmetry on the nonlinear wave propagation characteristics of periodic architectured media. The results show that chiral architectures are more affected by inner kinematic nonlinearities compared to achiral lattice designs. Non-centrosymmetric inner designs also modify the wave propagation attributes of both chiral and achiral lattice patterns, with different frequency ranges affected depending on the lattice type.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

添加到收藏夹

Article Engineering, Mechanical

Metamaterial design strategy for mechanical energy absorption under general loading

Jack E. Pechac et al.

Summary: This article presents a design strategy for two-dimensional, multi-stable cellular materials that utilizes local rotational degrees of freedom to support mechanical energy absorption under general loading. The cellular materials constructed following this strategy possess an absorption capability for all loading modes - tension, compression, and shear, filling the need for omni-directional, multi-modal energy absorption in a low-density, tunable, and re-usable platform.

EXTREME MECHANICS LETTERS (2022)

添加到收藏夹

Article Materials Science, Composites

A novel programmable composite metamaterial with tunable Poisson's ratio and bandgap based on multi-stable switching

Jia-Xin Wang et al.

Summary: This study presents a novel multi-pattern composite metamaterial with tunable Poisson's ratio and band gap, constructed using shape memory polymers based on curved-beams. The effects of geometric parameters and temperature on pattern switching and vibration performance were investigated through theoretical analysis, finite element simulation and experiments. Additionally, a bionic multi-degree-of freedom dexterous finger tube was designed based on this metamaterial, and the major geometric parameters affecting its bending angle were identified.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Acoustics

Tacticity-based one-dimensional chiral equilateral lattice for tailored wave propagation and design of elastic wave logic gate

Pengcheng Zhao et al.

Summary: This study proposes a lattice design strategy that considers chirality and tacticity to achieve a low-frequency band gap, and investigates the design of elastic wave logic gates. The study also analyzes the effects of different structural parameters on dynamic properties with experiments conducted to verify vibration transmission performance.

JOURNAL OF SOUND AND VIBRATION (2022)

添加到收藏夹

Article Acoustics

Configuration-controllable porous metamaterial and its bandgap characteristics: Experimental and numerical analysis

Nan Li et al.

Summary: A study has developed a configuration-controllable metamaterial and investigated its bandgap characteristics through experiments and numerical analysis. The results show that the configuration change significantly affects the bandgap characteristics and the frequency range and number of bandgaps can be effectively adjusted through configuration control.

JOURNAL OF SOUND AND VIBRATION (2022)

添加到收藏夹

Article Mechanics

Mechanical design and energy absorption performances of rational gradient lattice metamaterials

Peng Zhang et al.

Summary: This study proposes geometrically gradient lattice structures with controllable deformation features and adjustable mechanical properties, comparing experiments and simulations to demonstrate their promising mechanical application potentials. Results indicate that the deformation mechanisms of gradient lattice are beneficial for elevating energy absorption efficiency and manipulating the stress incremental process step by step. Optimization of design schemes and interface structures can significantly enhance the mechanical performance of metamaterials.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Physics, Applied

Topological insulator in a hexagonal plate with droplet holes

Kai Zhang et al.

Summary: This study introduces a tunable topological insulator system to produce topologically protected edge waves along a topological interface. The study proves the robustness and immunity to backscattering of these waves, as well as demonstrates their ability to be transported to different locations within the system at specific frequencies, providing a new method for acoustic guidance control.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)

添加到收藏夹

Article Engineering, Mechanical

In-plane wave propagation analysis for waveguide design of hexagonal lattice with Koch snowflake

Pengcheng Zhao et al.

Summary: This study investigates the band structure and directional characteristics of the hexagonal lattice with Koch snowflake. Results show that with increasing fractal order, the band structure exhibits self-similarity, with more band gaps, and the directional characteristics can further expand the vibration attenuation range.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

SMP-based multi-stable mechanical metamaterials: From bandgap tuning to wave logic gates

Zhiwen Ren et al.

Summary: This work proposes a method of creating geometrically reconfigurable and mechanically tunable multi-stable metamaterials to realize a kind of tunable elastic metamaterial with a stable state during the active regulation without continuous-consuming energy based on 4D printing technology. The tunable elastic metamaterial can adjust the starting/ending frequencies, broaden the frequency ranges of bandgaps and control the elastic wave propagation. The method can be used in vibration-isolated steady-state adjustable equipment and smart wave device, and a bi-stable logic-gate elastic metamaterial is implemented to correctly execute simple wave logic operations.

EXTREME MECHANICS LETTERS (2021)

添加到收藏夹

Article Engineering, Civil

A negative-stiffness based 1D metamaterial for bidirectional buffering and energy absorption with state recoverable characteristic

Renjing Gao et al.

Summary: This study introduces a novel metamaterial with negative-stiffness properties that exhibit buffering, energy absorption, and state recovery in two loading directions. Finite element analysis and experimental validation show that the designed structures demonstrate snap-through behavior and negative-stiffness effect, making them suitable for bidirectional buffering and energy absorption. The repeated experiments confirm the structures have good state-recoverability and shock-resistance.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

A mechanical metamaterial with reprogrammable logical functions

Tie Mei et al.

Summary: The reprogrammable mechanological metamaterial (ReMM) proposed in this study achieves logical computing through sequential excitations, allowing for selective imposition and release of excitations during initialization and reprogramming. Experimental results demonstrate the realization of universal combinatorial logic and sequential logic, while also discussing the fabrication scalability of the system.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Properties and tunability of band gaps in innovative reentrant and star-shaped hybrid honeycomb metamaterials

Yajun Xin et al.

Summary: This study introduces a new type of acoustic metamaterials, RSHHM, with tunable high and low frequency plane wave attenuation characteristics. By optimizing the geometrical parameters and mass inclusions, as well as applying large deformations, the band gaps of RSHHM can be adjusted for dynamic tunability.

RESULTS IN PHYSICS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Deformation behavior and band gap switching function of 4D printed multi-stable metamaterials

Wenxia Hu et al.

Summary: This paper presents an SMP metamaterial with mechanical reconstruction and self-recovery capability, which can achieve real-time, flexible and actively adjustable control of elastic waves. The mechanical properties and shapes of the metamaterial can adaptively switch under external temperature changes, and the bandgap can be greatly adjusted by changing the external temperature.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Engineering, Mechanical

Bistability-based foldable origami mechanical logic gates

Zhiqiang Meng et al.

Summary: This research presents a design of mechanical logic gates based on kirigami and origami, successfully demonstrating the experimental validation of AND, OR, and NOT gates. By combining the logic gates together, it provides a possible solution for more complex logic operations.

EXTREME MECHANICS LETTERS (2021)

添加到收藏夹

Article Mechanics

A novel 3D impact energy absorption structure with negative Poisson ? s ratio and its application in aircraft crashworthiness

Tao Wang et al.

Summary: The paper introduces a novel three-dimensional negative Poisson's ratio energy-absorbing structure based on two-dimensional nonconvex hexagonal cells, showing superior energy absorption capacity through theoretical calculations, finite element simulations, and experimental validation.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Seismic metamaterials with cross-like and square steel sections for low-frequency wide band gaps

Kai Zhang et al.

Summary: This study investigates the propagation of Lamb waves in seismic metamaterials assembled using periodically arranged cross-like and square steel sections in a soil medium to assess the feasibility of their use for seismic wave attenuation. The results show that seismic metamaterials with three complete band gaps below 20 Hz are of particular interest for low-frequency vibration control, with those composed of square steel sections exhibiting a more favorable performance in terms of wider band gaps. The study provides a new way to build seismic metamaterials by designing the volume fraction and steel section shapes to provide ultra-low and broad-band frequency vibration isolation capabilities that will allow the shielding of seismic waves in specific frequency ranges.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel design of multi-stable metastructures for energy dissipation

Yong Zhang et al.

Summary: By increasing the bending stiffness of beams while keeping the volume/mass constant, energy dissipation of metastructures can be largely improved. The lattice and hollow cross-section designs proposed in this work demonstrate good performance in achieving this goal, with sequential snap-through transitions and relatively large energy dissipation observed experimentally.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Mechanics

Effect of prestress on phononic band gaps induced by inertial amplification

M. Miniaci et al.

Summary: Phononic crystals and elastic metamaterials have received attention for unconventional wave control. Structures with adaptive elastic properties have been proposed for wave manipulation. External mechanical load can significantly impact band gaps induced by inertial amplification, showing notable shifts and dispersion changes. The application of external prestress can switch the structure's behavior from pass-band to stop-band, providing opportunities for real-time tunable wave manipulation.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Prestrain-induced bandgap tuning in 3D-printed tensegrity-inspired lattice structures

Kirsti Pajunen et al.

Summary: Experimental evidence is provided for bandgap tunability with global prestrain in additively-manufactured tensegrity-inspired lattice structures. The study demonstrates continuous tuning of wave speed and lowest-frequency bandgap location and width.

EXTREME MECHANICS LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Programmable Multistable Perforated Shellular

Jiahao Shi et al.

Summary: The development of a new 3D multistable shellular metamaterial by introducing delicate perforations on Schwarz's Primitive shellular surface has provided strong rigidity and enhanced energy dissipation. The introduction of multilayer staggered perforations forming hinges and expanding the perforation design in three orthogonal directions enables the creation of three-directional multistable shellular structures.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Programmable Buckling-based negative stiffness metamaterial

Xiaojun Tan et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Engineering, Mechanical

Design and characterization of multi-stable mechanical metastructures with level and tilted stable configurations

Yong Zhang et al.

EXTREME MECHANICS LETTERS (2020)

添加到收藏夹

Article Mechanics

Design and numerical validation of quasi-zero-stiffness metamaterials for very low-frequency band gaps

Changqi Cai et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D composite metamaterial with magnetic inclusions exhibiting negative stiffness and auxetic behaviour

Krzysztof K. Dudek et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mapping acoustical activity in 3D chiral mechanical metamaterials onto micropolar continuum elasticity

Yi Chen et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Actively controllable topological phase transition in homogeneous piezoelectric rod system

Weijian Zhou et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Near-field Terahertz Sensing of HeLa Cells and Pseudomonas Based on Monolithic Integrated Metamaterials with a Spintronic Terahertz Emitter

Zhongyang Bai et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Mechanics

In-plane impact resistance enhancement with a graded cell-wall angle design for auxetic metamaterials

Xin Wu et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Chemistry, Physical

Band Gaps and Vibration Isolation of a Three-dimensional Metamaterial with a Star Structure

Heng Jiang et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Real-time tunable negative stiffness mechanical metamaterial

Xiaojun Tan et al.

EXTREME MECHANICS LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-step deformation mechanical metamaterials

Zhiqiang Meng et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)

添加到收藏夹

Article Mechanics

A novel cylindrical negative stiffness structure for shock isolation

Xiaojun Tan et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

Reusable metamaterial via inelastic instability for energy absorption

Xiaojun Tan et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Mechanical

Architected materials for tailorable shear behavior with energy dissipation

Suihan Liu et al.

EXTREME MECHANICS LETTERS (2019)

添加到收藏夹

Article Engineering, Mechanical

Bandgap and wave attenuation mechanisms of innovative reentrant and anti-chiral hybrid auxetic metastructure

Dexing Qi et al.

EXTREME MECHANICS LETTERS (2019)

添加到收藏夹

Article Acoustics

The role of non-slender inner structural designs on the linear and non-linear wave propagation attributes of periodic, two-dimensional architectured materials

N. Karathanasopoulos et al.

JOURNAL OF SOUND AND VIBRATION (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review

Wenwang Wu et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Engineering, Mechanical

Computational characterization of the wave propagation behavior of multi-stable periodic cellular materials

Camilo Valencia et al.

EXTREME MECHANICS LETTERS (2019)

添加到收藏夹

Article Engineering, Mechanical

Novel multi-stable mechanical metamaterials for trapping energy through shear deformation

Xiaojun Tan et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Extension/Compression-Controlled Complete Band Gaps in 2D Chiral Square-Lattice-Like Structures

Y. L. Huang et al.

ACTA MECHANICA SOLIDA SINICA (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain Sensors

Ying Jiang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Mechanics

Wave propagation in pre-deformed periodic network materials based on large strains homogenization

H. Reda et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Control of acoustic properties of network materials by finite pre-deformations: Applications to 3D auxetic network materials

H. Reda et al.

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2018)

添加到收藏夹

Article Physics, Applied

Negative stiffness honeycombs as tunable elastic metamaterials

Benjamin M. Goldsberry et al.

JOURNAL OF APPLIED PHYSICS (2018)

添加到收藏夹

Article Acoustics

Wave propagation characteristics of periodic structures accounting for the effect of their higher order inner material kinematics

H. Reda et al.

JOURNAL OF SOUND AND VIBRATION (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

The role of anisotropy on the static and wave propagation characteristics of two-dimensional architectured materials under finite strains

H. Reda et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Physics, Fluids & Plasmas

Amplitude-dependent topological edge states in nonlinear phononic lattices

Raj Kumar Pal et al.

PHYSICAL REVIEW E (2018)

添加到收藏夹

Article Mechanics

Tuning elastic wave propagation in multistable architected materials

Julien Meaud et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)

添加到收藏夹

Article Acoustics

Micropolar dissipative models for the analysis of 2D dispersive waves in periodic lattices

H. Reda et al.

JOURNAL OF SOUND AND VIBRATION (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A hybrid elastic metamaterial with negative mass density and tunable bending stiffness

Yangyang Chen et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)

添加到收藏夹

Article Mechanics

Nonlinear wave propagation analysis in hyperelastic 1D microstructured materials constructed by homogenization

H. Reda et al.

MECHANICS RESEARCH COMMUNICATIONS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Three-dimensional mechanical metamaterials with a twist

Tobias Frenzel et al.

SCIENCE (2017)

添加到收藏夹

Article Physics, Applied

Lattice Metamaterials with Mechanically Tunable Poisson's Ratio for Vibration Control

Yanyu Chen et al.

PHYSICAL REVIEW APPLIED (2017)

添加到收藏夹

Review Nanoscience & Nanotechnology

Flexible mechanical metamaterials

Katia Bertoldi et al.

NATURE REVIEWS MATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Designing two-dimensional metamaterials of controlled static and dynamic properties

Nikolaos Karathanasopoulos et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Harnessing Deformation to Switch On and Off the Propagation of Sound

Sahab Babaee et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tunable Digital Metamaterial for Broadband Vibration Isolation at Low Frequency

Ziwei Wang et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Computation of the effective nonlinear mechanical response of lattice materials considering geometrical nonlinearities

Khaled ElNady et al.

COMPUTATIONAL MECHANICS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Combinatorial design of textured mechanical metamaterials

Corentin Coulais et al.

NATURE (2016)

添加到收藏夹

Review Nanoscience & Nanotechnology

Controlling sound with acoustic metamaterials

Steven A. Cummer et al.

NATURE REVIEWS MATERIALS (2016)

添加到收藏夹

Review Multidisciplinary Sciences

Acoustic metamaterials: From local resonances to broad horizons

Guancong Ma et al.

SCIENCE ADVANCES (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Metamaterials: Snapping Mechanical Metamaterials under Tension (Adv. Mater. 39/2015)

Ahmad Rafsanjani et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Engineering, Mechanical

Negative stiffness honeycombs for recoverable shock isolation

Dixon M. Correa et al.

RAPID PROTOTYPING JOURNAL (2015)

添加到收藏夹

Article Engineering, Mechanical

Phase transforming cellular materials

David Restrepo et al.

EXTREME MECHANICS LETTERS (2015)

添加到收藏夹

Article Physics, Applied

Meta-atom cluster acoustic metamaterial with broadband negative effective mass density

Huaijun Chen et al.

JOURNAL OF APPLIED PHYSICS (2014)

添加到收藏夹

Article Acoustics

A chiral elastic metamaterial beam for broadband vibration suppression

R. Zhu et al.

JOURNAL OF SOUND AND VIBRATION (2014)

添加到收藏夹

Article Physics, Multidisciplinary

Experiments on Seismic Metamaterials: Molding Surface Waves

S. Brule et al.

PHYSICAL REVIEW LETTERS (2014)

添加到收藏夹

Article Physics, Multidisciplinary

Harnessing Buckling to Design Tunable Locally Resonant Acoustic Metamaterials

Pai Wang et al.

PHYSICAL REVIEW LETTERS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Negative refraction of elastic waves at the deep-subwavelength scale in a single-phase metamaterial

R. Zhu et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Article Acoustics

Theoretical and experimental analyses of a nonlinear magnetic vibration isolator with quasi-zero-stiffness characteristic

Daolin Xu et al.

JOURNAL OF SOUND AND VIBRATION (2013)

添加到收藏夹

Correction Optics

Hyperbolic metamaterials (vol 7, pg 948, 2013)

Alexander Poddubny et al.

NATURE PHOTONICS (2013)

添加到收藏夹

Review Optics

Hyperbolic metamaterials

Alexander Poddubny et al.

NATURE PHOTONICS (2013)

添加到收藏夹

Review Optics

Experimental realisation of electromagnetic metamaterials

George Goussetis et al.

JOURNAL OF MODERN OPTICS (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.