☆ 4.6 Article

Augmentation of pool boiling performance using Ag/ZnO hybrid nanofluid over EDM assisted robust heater surface modification

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Physics, Multidisciplinary

Hybrid nanofluid flow towards an elastic surface with tantalum and nickel nanoparticles, under the influence of an induced magnetic field

Lijun Zhang et al.

Summary: The physical behavior of a nanofluid composed of kerosene and tantalum and nickel nanoparticles propagating through a porous, elastic surface was studied. Results show that the flow propagates faster for higher values of Darcy number and Tantalum nanoparticles, with the magnetic field opposing the fluid motion. The presence of Tantalum and Nickel nanoparticles also leads to a decrease in the thermal boundary layer.

EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS (2022)

添加到收藏夹

Article Thermodynamics

Microscale to Macroscale-Extending Microscale Enhancement Techniques to Large-Scale Boiling Equipment

Satish G. Kandlikar

Summary: Boiling is a highly efficient heat transfer phenomenon, but further improvements are needed in many applications. Microscale enhancement techniques on small heaters have achieved success in improving heat transfer efficiency, and these techniques may be applied in large-scale boiling equipment.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2022)

添加到收藏夹

Article Engineering, Chemical

Amelioration of pool boiling thermal performance utilizing graphene-silver hybrid nanofluids

Xu Ma et al.

Summary: In this study, novel hybrid nanoparticles were prepared using Ag modified functionalized GNP, and the boiling heat transfer properties of the nanofluids were investigated. The GNP-Ag hybrid nanofluids with a weight concentration of 0.001% exhibited the best heat transfer performance, with improved structural modification and wetting properties playing a crucial role in enhancing the heat transfer.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Review Physics, Multidisciplinary

Recent advances on the fundamental physical phenomena behind stability, dynamic motion, thermophysical properties, heat transport, applications, and challenges of nanofluids

Zafar Said et al.

Summary: The rapid development of nanotechnology in the past decade has created numerous opportunities for researchers and engineers. Nanofluids, created by suspending nanoparticles in conventional heat transfer carriers, offer significant advantages in thermal properties. This study addresses the challenge of nanofluid stability and analyzes various forces and physical phenomena affecting the stability. Stable and highly conductive nanofluids can be produced through one-step or two-step production methods, but both methods face the problem of nanoparticle agglomeration.

PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Tier Hierarchical Structures for Extreme Pool Boiling Heat Transfer Performance

Youngsup Song et al.

Summary: In this work, a three-tier hierarchical structure is designed to overcome the trade-off between HTC and CHF. By defining nucleation sites with microcavities and incorporating nanostructures, the bubble coalescence is minimized and evaporation is promoted, leading to significant enhancement in both HTC and CHF compared to a smooth surface.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Thermodynamics

Experimental investigation of heat transfer enhancement in pool boiling using novel Ag/ZnO hybrid nanofluids

Pravin O. Sharma et al.

Summary: The study investigated the enhancements in thermal properties, CHF, and HTC of novel Ag/ZnO hybrid nanofluid at various concentrations. It was found that within a certain concentration range, the nanofluid can enhance heat transfer, but exceeding a certain concentration can deteriorate the boiling heat transfer.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Thermodynamics

The empirical characteristics on transient nature of Al2O3-water nanofluid pool boiling

Ashutosh Pare et al.

Summary: The present investigation assessed the transient characteristics of nucleate pool boiling heat transfer in Al2O3-water nanofluids. The results revealed up to 90% heat transfer deterioration and 50% to 300% increase in nanoparticle deposition with increasing heat flux, nanofluid concentrations, and boiling durations. Microscopic images showed the evolution of nucleation sites and deposition patterns over varying trends.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Surface qualitative analysis and ANN modelling for pool boiling heat transfer using Al2O3-water based nanofluids

Ashutosh Pare et al.

Summary: The study focuses on the surface-associated qualitative analysis of the nucleate pool boiling heat transfer characteristics of alumina-water based nanofluids. Experimental results were used to develop an optimal artificial neural network (ANN) design with various training algorithms and hidden layers. The nanofluids were prepared using alumina nanoparticles and distilled water, with varying concentrations and were characterized using various techniques such as FESEM, EDAX, zeta potential stability test, and thermophysical analysis. The study found that nanofluids demonstrated up to a 70% enhancement in pool boiling heat transfer compared to distilled water, and the ANN model using the Levenberg Marquardt algorithm exhibited the most optimized structure.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

添加到收藏夹

Article Mechanics

On the mechanisms leading to ordered nanoparticles deposition during single bubble nucleate pool boiling regime

Prasad Kangude et al.

Summary: This study investigates the mechanisms of nanoparticle deposition during nucleate pool boiling on plain hydrophobic surfaces through experiments and infrared thermography, revealing the orderly pattern of nanoparticle deposition and its impact on heat transfer coefficient.

PHYSICS OF FLUIDS (2021)

添加到收藏夹

Article Thermodynamics

Amelioration of pool boiling thermal performance in case of using a new hybrid nanofluid

Mohammed Saad Kamel et al.

Summary: This study investigated the pool boiling thermal performance of Al2O3 and CeO2 hybrid nanoparticles, finding that the hybrid nanofluid exhibited improved heat transfer performance compared to deionized water, with the highest enhancement ratio observed at a volume concentration of 0.05% under low heat flux conditions.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Experimental Study of Pool Boiling Enhancement Using a Two-Step Electrodeposited Cu-GNPs Nanocomposite Porous Surface With R-134a

Anil S. Katarkar et al.

Summary: Porous metallic composite coatings have been fabricated on heating surfaces to improve pool boiling heat transfer performance. Cu-GNPs nanocomposite coatings prepared using different current densities exhibited enhanced boiling performance compared to plain Cu surfaces, attributed to increased surface roughness, active nucleation site density, and micro/nanoporosity.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

添加到收藏夹

Article Thermodynamics

Experimental study of an air humidity absorption cycle based on the MHI

Reza Moradi et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

添加到收藏夹

Article Thermodynamics

Investigation of Nucleate Pool Boiling of Saturated Pure Liquids and Ethanol-Water Mixtures on Smooth and Laser-Textured Surfaces

Peter Zaksek et al.

NANOSCALE AND MICROSCALE THERMOPHYSICAL ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Investigation to Improve the Pool Boiling Heat Transfer Characteristics Using Laser-Textured Copper-Grooved Surfaces

Dharmendra Mani et al.

INTERNATIONAL JOURNAL OF PHOTOENERGY (2020)

添加到收藏夹

Article Thermodynamics

Pool boiling heat transfer characteristics of iron oxide nano-suspension under constant magnetic field

M. M. Sarafraz et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superhydrophilic Composite Structure of Copper Microcavities and Nanocones for Enhancing Boiling Heat Transfer

Huajie Ze et al.

ADVANCED MATERIALS INTERFACES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Boiling heat transfer characteristics of graphene oxide nanoplatelets nano-suspensions of water-perfluorohexane (C6F14) and water-n-pentane

Marjan Goodarzi et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Engineering, Mechanical

An experimental investigation of pool boiling augmentation using four-step electrodeposited micro/nanostructured porous surface in distilled water

Ali Mehdikhani et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Industrial

Electrical discharge-assisted milling for machining titanium alloy

Changping Li et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement studies in pool boiling using hybrid nanofluids

Yagnem Anil Reddy et al.

THERMOCHIMICA ACTA (2019)

添加到收藏夹

Article Thermodynamics

Pool boiling of HFE-7200 on nanoparticle-coating surfaces: Experiments and heat transfer analysis

Zhen Cao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Experimental study on the anti-fouling effects of EDM machined hierarchical micro/nano structure for heat transfer surface

Z. R. He et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Enhancement in nucleate pool boiling heat transfer on nano-second laser processed copper surfaces

Vishal V. Nirgude et al.

EXPERIMENTAL HEAT TRANSFER (2019)

添加到收藏夹

Review Thermodynamics

Review of pool boiling enhancement by surface modification

Gangtao Liang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Electrophoretic deposition surfaces to enhance HFE-7200 pool boiling heat transfer and critical heat flux

Zhen Cao et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

添加到收藏夹

Article Thermodynamics

Synthesis and thermo-physical properties of water-based novel Ag/ZnO hybrid nanofluids

Surendra D. Barewar et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

添加到收藏夹

Article Thermodynamics

An experimental study on deposited surfaces due to nanofluid pool boiling: Comparison between rough and smooth surfaces

Mohammad Reza Salimpour et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

添加到收藏夹

Article Thermodynamics

Microscale Morphology Effects of Copper-Graphene Oxide Coatings on Pool Boiling Characteristics

Arvind Jaikumar et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2017)

添加到收藏夹

Article Energy & Fuels

Enhancement of nucleate boiling heat transfer using structured surfaces

Vishal V. Nirgude et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2017)

添加到收藏夹

Article Thermodynamics

Influence of orientation and roughness of heater surface on critical heat flux and pool boiling heat transfer coefficient of nanofluid

Mina Dadjoo et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Experimental investigation of nucleate pool boiling heat transfer enhancement of TiO2-water based nanofluids

Hafiz Muhammad Ali et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Chemistry, Physical

Aluminum surface wettability changes by pool boiling of nanofluids

Feini Zhang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2016)

添加到收藏夹

Article Thermodynamics

Pool boiling of Novec 7300 and self-rewetting fluids on electrically-assisted supersonically solution-blown, copper-plated nanofibers

Rakesh P. Sahu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Nuclear Science & Technology

Enhancement of Pool Boiling Heat Transfer in Water Using Sintered Copper Microporous Coatings

Seongchul Jun et al.

NUCLEAR ENGINEERING AND TECHNOLOGY (2016)

添加到收藏夹

Article Physics, Applied

Boiling on spatially controlled heterogeneous surfaces: Wettability patterns on microstructures

HangJin Jo et al.

APPLIED PHYSICS LETTERS (2015)

添加到收藏夹

Article Thermodynamics

Enhanced pool boiling for electronics cooling using porous fin tops on open microchannels with FC-87

Arvind Jaikumar et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Enhanced boiling heat transfer on composite porous surface

Pengfei Xu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

添加到收藏夹

Article Thermodynamics

Pool boiling heat transfer to dilute copper oxide aqueous nanofluids

M. M. Sarafraz et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)

添加到收藏夹

Article Engineering, Chemical

Nanofluid pool boiling heat transfer phenomenon

Saeid Vafaei

POWDER TECHNOLOGY (2015)

添加到收藏夹

Article Thermodynamics

Experimental investigation on pool boiling heat transfer of ZnO, and CuO water-based nanofluids and effect of surfactant on heat transfer coefficient

Sina N. Shoghl et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

添加到收藏夹

Article Mechanics

Enhanced nucleate boiling on copper micro-porous surfaces

Mohamed S. El-Genk et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2010)

添加到收藏夹

Article Thermodynamics

The Influence of Surface Roughness on Nucleate Pool Boiling Heat Transfer

Benjamin J. Jones et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2009)

添加到收藏夹

Article Engineering, Chemical

Enhanced boiling of methanol on copper coated surface

L. Prasad et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2007)

添加到收藏夹

Article Thermodynamics

Surface effects on pool boiling CHF

K Ferjancic et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2002)

添加到收藏夹

Article Thermodynamics

Bubbling features from a single artificial cavity

M Shoji et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.