☆ 4.6 Article

Analysis of grinding mechanics and improved grinding force model based on randomized grain geometric characteristics

CHINESE JOURNAL OF AERONAUTICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Engineering, Mechanical

Biological Stability of Water-Based Cutting Fluids: Progress and Application

Lizhi Tang et al.

Summary: The use of cutting fluid in engineering manufacturing is crucial for processing efficiency and surface quality. However, the long-term recycling of water-based cutting fluid can lead to deterioration and breeding of bacteria, causing failures and increased costs. This article discusses the mechanisms of action of additives and microbial metabolites, the denaturation mechanisms and efficiency of traditional bactericides, the disruption of cell membranes by nanomaterials, and the destruction of bacterial genetic material by ultraviolet rays and ozone. The evaluation of various sterilization methods provides insights into improving the biological stability of cutting fluid.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

An analytical force and energy model for ductile-brittle transition in ultra-precision grinding of brittle materials

Zhengding Zheng et al.

Summary: This paper establishes a novel grinding force and energy model to predict the critical grinding depth considering the random interactions between multiple grains. Experimental validations on single crystal silicon are conducted, and the surface generation mechanisms of the ductile-brittle transition are comprehensively investigated. The proposed model accurately predicts the realistic critical grinding depth with an average deviation of less than 9.2%.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Industrial

Establishment of dynamic grinding force model for ultrasonic-assisted single abrasive high-speed grinding

Xiaofei Lei et al.

Summary: In the grinding process, the magnitude of the grinding force significantly affects the surface quality of the workpiece and the tool life. This study explored the impact of different grinding parameters on grinding force in ultrasonic-assisted grinding, establishing a dynamic force model and verifying it through experiments. The results showed a consistent trend in the variation of grinding force, with the axial force of a single abrasive particle always greater than the tangential force.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Aerospace

Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: From mechanisms to application

Xin Cui et al.

Summary: Replacing flood and dry machining with minimum quantity lubrication (MQL) technology is an inevitable trend of sustainable manufacturing. However, MQL cannot meet the high demand for cooling and lubrication in the machining of aeronautical difficult-to-machine materials. This study focuses on the comprehensive quantitative assessment of tribological characteristics in titanium alloy and nickel alloy machining using nano-biolubricants, specifically non-toxic carbon group nano-enhancers (CGNs), aiming to systematically answer the machining mechanisms under lubrication of CGNs.

CHINESE JOURNAL OF AERONAUTICS (2022)

添加到收藏夹

Article Automation & Control Systems

Simulation and experimental study of the ground surface topography of GH4169 by grains arrayed brazed diamond wheels

Wentao Wang et al.

Summary: A novel simulation model is proposed for predicting machined surface topography in grinding of superalloy, considering the geometry and gesture of the diamond grains. The model integrates abrasive grain arrangements and plowing induced pile-up ridges, demonstrating accuracy and practicality in optimizing grain arrangement in diamond wheel design.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Automation & Control Systems

A grinding force prediction model with random distribution of abrasive grains: considering material removal and undeformed chips

Xuezhi Wang et al.

Summary: This paper studied the grinding force under different grinding parameters based on single grain-grinding experiment and established a grinding force model for multi-grain abrasive. The grinding specific energy under different undeformed chip thickness was obtained through scratch tests. The results showed that the grinding specific energy changes with the change of the undeformed chip thickness.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Automation & Control Systems

Study on grinding nickel-based superalloy GH4169 with ceramic bond CBN wheel controlling abrasive orientation by magnetic field

Xuezhi Wang et al.

Summary: In this paper, a method for controlling the grain orientation of ceramic CBN grinding wheel using magnetic field was proposed. The experimental results showed that the magnetically controlled ceramic CBN grinding wheel had lower temperature and grinding force, and better grinding surface quality than the common grinding wheel. This method enriches the preparation process of ceramic CBN grinding wheel and has important significance for further expanding its application.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Automation & Control Systems

Subsurface residual stress and damaged layer in high-speed grinding considering thermo-mechanical coupling influence

Zhida Ren et al.

Summary: This study investigates the influence of high-speed grinding on the subsurface residual stress and damaged layer, and proposes mathematical models to analyze the thermo-mechanical coupling effect on the residual stress distribution. The results demonstrate that higher grinding speeds can decrease the depth of residual stress and damaged layer, thereby enhancing the precision retention and fatigue performance of components.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Review Engineering, Manufacturing

Electrostatic atomization minimum quantity lubrication machining: from mechanism to application

Wenhao Xu et al.

Summary: This study provides a comprehensive review and critical assessment of electrostatic atomization MQL, including its critical equipment, lubrication and heat transfer mechanisms, and comparison with pneumatic atomization MQL. Previous experiments have shown that electrostatic atomization MQL improves machining performance. Future development directions are proposed.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Aerospace

Effect of creep feed grinding on surface integrity and fatigue life of Ni3Al based superalloy IC10

Shuaiqi Zhang et al.

Summary: Ni3Al-based superalloy IC10 is investigated for its creep feed grinding properties, analyzing the effects of grinding parameters on forces, temperature, and fatigue life. The study concludes that grinding depth is the most influential factor, while surface roughness and hardening also play key roles in fatigue life. Recommended grinding parameters for better surface quality and fatigue life improvement are provided in the study.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Article Engineering, Aerospace

Investigation on induction brazing of profiled cBN wheel for grinding of Ti-6Al-4V

Qilin Li et al.

Summary: This study successfully utilized induction brazing to process profiled cBN grinding wheels, achieving optimal results through simulation-designed induction coils and working parameters. Experimental results showed superior performance and grinding quality compared to electroplating, highlighting the effectiveness of the induction brazing method.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy

Qing Miao et al.

Summary: The study investigated the surface deformation structures of turbine blade root of single crystal nickel-based superalloy produced under different creep feed grinding conditions, revealing gradient microstructures in the superficial layer. The formation of such gradient microstructures was found to be related to the graded variations in the plastic strain and strain rate induced in the creep feed grinding process.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Industrial

A modified constitutive model coupled with microstructure evolution incremental model for machining of titanium alloy Ti-6Al-4V

Guangxin Liu et al.

Summary: A modified constitutive model is proposed for the machining of Ti-6Al-4V, which incorporates the response of flow stress to microstructure evolution, and an incremental model for capturing microstructure evolution during cutting process. Experimental and simulation results demonstrate the accuracy of the model in predicting cutting forces, illustrating the impact of dynamic recrystallization on chip formation.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Industrial

Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant

Teng Gao et al.

Summary: The study compared the mechanical properties of CFRP in flood cooling and dry grinding, and proposed the grinding mechanics with CNT nano-lubricant minimum quantity lubrication. Four sub-models were developed to explain the grinding mechanisms of CFRP under special transversal conditions.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Fabrication and wear characteristics of open-porous cBN abrasive wheels in grinding of Ti-6Al-4V alloys

Wenfeng Ding et al.

Summary: The open-porous sintered cBN abrasive wheels exhibit ideal grinding performance and long tool-life by optimizing pore size and porosity, utilizing vacuum sintering process, and enhancing bonding strength through chemical reactions. Stable grinding force ratio and cutting performance are maintained, while sharpness and surface roughness are improved due to dynamic changes in chip storage space and self-sharpening.

WEAR (2021)

添加到收藏夹

Article Automation & Control Systems

Process parameter optimization and surface integrity evolution in the high-speed grinding of TiAl intermetallics based on grey relational analysis method

Tao Chen et al.

Summary: The TiAl intermetallic alloy exhibited high hardness and stability in high-speed grinding experiments, with the optimal parameter combination of v(s)=90 m/s, v(w)=0.5 m/min, and a(p)=0.1 mm.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A cutting force prediction model in axial ultrasonic vibration end grinding for BK7 optical glass considering protrusion height of abrasive grits

Cheng Huang et al.

Summary: A theoretical model for predicting cutting force in AUVEG of BK7 optical glass with consideration of the nonuniform protrusion height of abrasive grits was proposed and validated through experiments. The model can be used to select process parameters for achieving high efficiency and precision in AUVEG machining of BK7 optical glass.

MEASUREMENT (2021)

添加到收藏夹

Review Engineering, Mechanical

Cryogenic minimum quantity lubrication machining: from mechanism to application

Mingzheng Liu et al.

Summary: The article discusses the role of cutting fluid in metal cutting and the environmental issues associated with traditional flood machining. It then explores the limitations of alternative technologies such as MQL and cryogenic cooling, and the potential of combining the two in CMQL technology. The benefits, mechanisms, and application prospects of CMQL are systematically analyzed, showing its superiority over cryogenic or MQL alone.

FRONTIERS OF MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Challenges in laser-assisted milling of titanium alloys

Matthew S. Dargusch et al.

Summary: Detailed studies on laser-assisted machining (LAM) of titanium alloys have revealed the positive impact of laser preheating on reducing cutting forces and improving productivity, as well as the detrimental effect of LAM on tool life. The research evaluates common cutting tools with different coating types to determine their effect on tool wear mechanisms in the machining of titanium alloys, and suggests the need for the development of new cutting tools that are not affected by diffusion-controlled wear processes.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Influence of grinding parameters on Inconel 625 surface grinding

Rodrigo de Souza Ruzzi et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Engineering, Industrial

An analytical grinding force model based on individual grit interaction

Hamid Jamshidi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Dynamic modeling of ultra-precision fly cutting machine tool and the effect of ambient vibration on its tool tip response

Jianguo Ding et al.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Predicting the grinding force of titanium matrix composites using the genetic algorithm optimizing back-propagation neural network model

Huan Zhou et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2019)

添加到收藏夹

Article Chemistry, Analytical

Establishment and Verification of the Cutting Grinding Force Model for the Disc Wheel Based on Piezoelectric Sensors

Jing Ni et al.

SENSORS (2019)

添加到收藏夹

Article Engineering, Mechanical

Parametric evaluation and three-dimensional modelling for surface topography of grinding wheel

Wei Liu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Physics, Condensed Matter

Study of subsurface damage of monocrystalline nickel in nanometric grinding with spherical abrasive grain

Jie Ren et al.

PHYSICA B-CONDENSED MATTER (2019)

添加到收藏夹

Article Automation & Control Systems

Characterization of grain geometrical features for monolayer brazed grinding wheels based on grain cross-sections

Junying Chen et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Manufacturing

Deformation mechanism and force modelling of the grinding of YAG single crystals

Chen Li et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

添加到收藏夹

Review Engineering, Mechanical

Tribology of Ti6Al4V: A review

Jibin T. Philip et al.

FRICTION (2019)

添加到收藏夹

Article Engineering, Aerospace

Fracture behavior and self-sharpening mechanisms of polycrystalline cubic boron nitride in grinding based on cohesive element method

Xin Huang et al.

CHINESE JOURNAL OF AERONAUTICS (2019)

添加到收藏夹

Article Automation & Control Systems

Numerical and experimental investigation of the shear angle in high-speed cutting of Al6061-T6

Mohan Hao et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Manufacturing

An investigation of resolved shear stress on activation of slip systems during ultraprecision rotary cutting of local anisotropic Ti-6Al-4V alloy: Models and experiments

Zejia Zhao et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

添加到收藏夹

Article Automation & Control Systems

Grinding characteristics in high-speed grinding of boron-diffusion-hardened TC21-DT titanium alloy with vitrified CBN wheel

Yansong Zhu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Manufacturing

On a stochastically grain-discretised model for 2D/3D temperature mapping prediction in grinding

Hao Nan Li et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

添加到收藏夹

Article Engineering, Manufacturing

Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms

Yanbin Zhang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

添加到收藏夹

Article Engineering, Mechanical

Detailed modeling of cutting forces in grinding process considering variable stages of grain-workpiece micro interactions

Hao Nan Li et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

SPH and FE coupled 3D simulation of monocrystal SiC scratching by single diamond grit

Nian Duan et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)

添加到收藏夹

Article Thermodynamics

Simulation and experimental research on Si3N4 ceramic grinding based on different diamond grains

Jian Sun et al.

ADVANCES IN MECHANICAL ENGINEERING (2017)

添加到收藏夹

Review Engineering, Aerospace

Review on monolayer CBN superabrasive wheels for grinding metallic materials

Ding Wenfeng et al.

CHINESE JOURNAL OF AERONAUTICS (2017)

添加到收藏夹

Article Automation & Control Systems

Performances of Al2O3/SiC hybrid nanofluids in minimum-quantity lubrication grinding

Xianpeng Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Automation & Control Systems

Effect of grinding wheel ultrasonic vibration on chip formation in surface grinding of Inconel 718

Sisi Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Manufacturing

From the microscopic interaction mechanism to the grinding temperature field: An integrated modelling on the grinding process

Jingliang Jiang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Article Engineering, Manufacturing

A predictive model of grinding force in silicon wafer self-rotating grinding

Jinglong Sun et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Proceedings Paper Engineering, Industrial

FEM Based Modeling of Cylindrical Grinding Process Incorporating Wheel Topography Measurement

Ali Zahedi et al.

7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)

添加到收藏夹

Article Automation & Control Systems

Modeling and analysis of grinding forces based on the single grit scratch

Abdolhamid Azizi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling of a virtual grinding wheel based on random distribution of multi-grains and simulation of machine-process interaction

Xiang-lei Zhang et al.

JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2015)

添加到收藏夹

Article Automation & Control Systems

Grain trajectory and grain workpiece contact analyses for modeling of grinding force and energy partition

Dexiang Wang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

添加到收藏夹

Article Automation & Control Systems

External grind-hardening forces modelling and experimentation

K. Salonitis et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Manufacturing

2D/3D ground surface topography modeling considering dressing and wear effects in grinding process

J. L. Jiang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Investigation of different grain shapes and dressing to predict surface roughness in grinding using kinematic simulations

Yueming Liu et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2013)

添加到收藏夹

Article Engineering, Aerospace

Grindability and Surface Integrity of Cast Nickel-based Superalloy in Creep Feed Grinding with Brazed CBN Abrasive Wheels

Ding Wenfeng et al.

CHINESE JOURNAL OF AERONAUTICS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

The variation of strain rate sensitivity exponent and strain hardening exponent in isothermal compression of Ti-6Al-4V alloy

Jiao Luo et al.

MATERIALS & DESIGN (2010)

添加到收藏夹

Article Engineering, Industrial

Modeling and experimental study of grinding forces in surface grinding

Jinyuan Tang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Automation & Control Systems

Grinding force and power modeling based on chip thickness analysis

Rogelio L. Hecker et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)

添加到收藏夹

Article Engineering, Manufacturing

On the mechanics of the grinding process - Part I. Stochastic nature of the grinding process

ZB Hou et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)

添加到收藏夹

Article Engineering, Industrial

The characterisation of grinding wheels using 3D surface measurement techniques

DL Butler et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.