Analysis of grinding mechanics and improved grinding force model based on randomized grain geometric characteristics

Too high grinding force will lead to a large increase in specific grinding energy, resulting in high temperature in grinding zone, especially for the aerospace difficult cutting metal materials, seriously affecting the surface quality and accuracy. At present, the theoretical models of grinding force are mostly based on the assumption of uniform or simplified morphological characteristics of grains, which is inconsistent with the actual grains. Especially for non-engineering grinding wheel, most geometric characteristics of grains are ignored, resulting in the calculation accuracy that cannot guide practical production. Based on this, an improved grinding force model based on random grain geometric characteristics is proposed in this paper. Firstly, the surface topography model of CBN grinding wheel is established, and the effective grain determination mechanism in grinding zone is revealed. Based on the known grinding force model and mechanical behavior of interaction between grains and workpiece in different stages, the concept of grain effective action area is proposed. The variation mechanism of effective action area under the influence of grain geometric and spatial characteristics is deeply analyzed, and the calculation method under random combination of five influencing parameters is obtained. The numerical simulation is carried out to reveal the dynamic variation process of grinding force in grinding zone. In order to verify the theoretical model, the experiments of dry grinding Ti-6Al-4 V are designed. The experimental results show that under different machining parameters, the results of numerical calculation and experimental measurement are in good agreement, and the minimum error value is only 2.1 %, which indicates that the calculation accuracy of grinding force model meets the requirements and is feasible. This study will provide a theoretical basis for optimizing the wheel structure, effectively controlling the grind -ing force range, adjusting the grinding zone temperature and improving the workpiece machining quality in the industrial grinding process.& COPY; 2022 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).

Automated summary

In this study, an improved grinding force model based on random grain geometric characteristics is proposed. By establishing the surface topography model of CBN grinding wheel and analyzing the influence mechanism of grain geometric and spatial characteristics, the calculation method under random combination of influencing parameters is obtained. Numerical simulation and experiments verify the feasibility and accuracy of the grinding force model, which provides a theoretical basis for optimizing wheel structure and improving workpiece machining quality.