4.8 Article

In Situ Interfacial Passivation in Aqueous Electrolyte for Mg-Air Batteries with High Anode Utilization and Specific Capacity

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Electrochemistry

Influence of Li2CrO4 as additive for NaCl electrolyte on Mg-air battery discharge performances

Yanchun Zhao et al.

Summary: Li2CrO4 was used as an electrolyte additive for Mg-air batteries. The corrosion behavior of AZ31 alloy and the discharge performance of Mg-air batteries were studied with different amounts of Li2CrO4. The addition of Li2CrO4 significantly improved the corrosion resistance of the alloy and the anode efficiency of the battery. The optimal amount of Li2CrO4 was found to be 0.02 M.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2022)

Article Green & Sustainable Science & Technology

A non-flammable hydrous organic electrolyte for sustainable zinc batteries

Daliang Han et al.

Summary: Aqueous zinc batteries are safer than lithium-ion batteries, but their anodes are susceptible to dendrite failure and side reactions. The authors demonstrate a low-cost electrolyte that involves hydrate salt and organic solvent, proving to be non-flammable. The zinc battery cell delivers excellent performance even at low temperatures of -30 degrees Celsius.

NATURE SUSTAINABILITY (2022)

Article Chemistry, Physical

Rechargeable magnesium batteries enabled by conventional electrolytes with multifunctional organic chloride additives

Dan-Thien Nguyen et al.

Summary: This study introduces tetrabutylammonium chloride (TBAC) as a multifunctional electrolyte additive for conventional electrolytes, which improves the performance of rechargeable magnesium batteries.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

Discharge Behavior and Mechanism of Solid-Solution-Treated Alloy Anodes for Magnesium-Air Batteries

Fanglei Tong et al.

Summary: This work studies the properties of magnesium alloy-air batteries with solution-treated alloys and finds that the addition of zinc and tin can alleviate the preferred corrosion during discharge. Solution-treated Mg-2 wt % Zn-3 wt % Sn alloy anodes demonstrate excellent battery performance.

ACS APPLIED ENERGY MATERIALS (2022)

Article Electrochemistry

Influence of Li2CrO4 as additive for NaCl electrolyte on Mg-air battery discharge performances

Yanchun Zhao et al.

Summary: The study found that adding an appropriate amount of Li2CrO4 to Mg-air batteries can significantly improve the corrosion resistance of the AZ31 alloy and the discharge performance of the battery. The anode efficiency of the battery increases with the increase in Li2CrO4 content when it is less than 0.02M, but no significant change is observed when it is greater than 0.02M. Additionally, when the content reaches 0.1M, the discharge voltage of the battery drops dramatically, and the voltage lag time also increases greatly.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2022)

Article Electrochemistry

Advanced polymer-based electrolytes in zinc-air batteries

Qingqing Liu et al.

Summary: Polymer-based electrolytes play a critical role in zinc-air batteries, improving their performance. This article reviews the recent progress in polymer-based electrolytes for zinc-air batteries and proposes future challenges and viable strategies.

ESCIENCE (2022)

Article Multidisciplinary Sciences

A rechargeable zinc-air battery based on zinc peroxide chemistry

Wei Sun et al.

Summary: The study presents a zinc-O-2/zinc peroxide chemistry that operates through a 2e(-)/O-2 process in nonalkaline aqueous electrolytes, allowing highly reversible redox reactions in zinc-air batteries. This innovative ZnO2 chemistry, enabled by water-poor and zinc ion (Zn2+)-rich inner Helmholtz layer, shows superior reversibility and stability compared to alkaline zinc-air batteries.

SCIENCE (2021)

Review Chemistry, Multidisciplinary

Controlled Synthesis and Structure Engineering of Transition Metal-based Nanomaterials for Oxygen and Hydrogen Electrocatalysis in Zinc-Air Battery and Water-Splitting Devices

Zhao Zhang et al.

Summary: Efficient electrocatalysts are essential for improving the performance of clean energy devices, with transition metal-based nanomaterials (TMNs) being a promising choice due to their abundant reserves, low cost, and well-designed active sites. Current research efforts focus on optimizing the external morphology and internal electronic structure of TMNs, as well as strategies to expose more active sites. Single-atom TMNs offer a deeper understanding of catalytic processes at an atomic scale, while challenges and development trends in TMNs for clean energy devices are also highlighted.

CHEMSUSCHEM (2021)

Article Electrochemistry

Indium chloride as an electrolyte additive for primary aqueous Mg batteries

Linqian Wang et al.

Summary: In this study, the effect of indium chloride (InCl3) as an electrolyte additive for primary aqueous Mg batteries was evaluated, showing that adding InCl3 can increase the utilization efficiency of the anode and enhance the cell voltage.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Multidisciplinary

High-Energy-Density Magnesium-Air Battery Based on Dual-Layer Gel Electrolyte

Luhe Li et al.

Summary: Utilizing a dual-layer gel electrolyte can effectively solve the corrosion of Mg anode and the formation of dense passive layer, improving the performance of Mg-air batteries. The resulting batteries exhibit high specific capacity, energy density, and can be made into fiber shape, showing stable operation under various deformations.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Review Energy & Fuels

Regulating the Catalytically Active Sites in Low-Cost and Earth-Abundant 3d Transition-Metal-Based Electrode Materials for High-Performance Zinc-Air Batteries

Jiajun Wang et al.

Summary: The increasing demand for clean and efficient energy devices is driving more attention towards green and low-cost aqueous zinc-air batteries. Among the numerous electrocatalysts, earth-abundant 3d transition-metal-based nanomaterials are widely explored for their cost-effectiveness and high activities in influencing the performance of ZABs. This review categorizes the active sites for catalyzing OER/ORR of different catalysts and introduces strategies for regulating these sites and their reaction mechanisms.

ENERGY & FUELS (2021)

Review Materials Science, Multidisciplinary

A review of non-noble metal-based electrocatalysts for CO2 electroreduction

Jia-Jun Wang et al.

Summary: Excessive CO2 emissions have caused severe environmental issues, leading to the exploration of non-noble metal-based CO2RR catalysts as a critical solution. Researchers summarized the recent advances and classification of such catalysts, discussing their preparation strategies and CO2RR mechanisms in detail.

RARE METALS (2021)

Review Metallurgy & Metallurgical Engineering

Magnesium alloys as anodes for neutral aqueous magnesium-air batteries

Fanglei Tong et al.

Summary: Magnesium is an abundant, green and low-cost element, making it a promising material for energy storage devices like magnesium-air batteries. However, practical application is hindered by challenges such as low anodic efficiency and passivation layer formation on magnesium metal anodes. Research on magnesium alloys as anode materials shows potential for addressing these challenges and improving the performance of magnesium-air batteries.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Review Chemistry, Physical

Aqueous metal-air batteries: Fundamentals and applications

Qianfeng Liu et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

A high-rate and long-life organic-oxygen battery

Guangtao Cong et al.

NATURE MATERIALS (2019)

Article Chemistry, Physical

Mg-Ca binary alloys as anodes for primary Mg-air batteries

Min Deng et al.

JOURNAL OF POWER SOURCES (2018)

Article Multidisciplinary Sciences

Suppressing corrosion in primary aluminum-air batteries via oil displacement

Brandon J. Hopkins et al.

SCIENCE (2018)

Review Chemistry, Physical

Thermal runaway mechanism of lithium ion battery for electric vehicles: A review

Xuning Feng et al.

ENERGY STORAGE MATERIALS (2018)

Review Materials Science, Multidisciplinary

Fundamentals and advances in magnesium alloy corrosion

M. Esmaily et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Article Chemistry, Physical

Current Progress on Rechargeable Magnesium-Air Battery

Chun-Sheng Li et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Rechargeable Zinc Alkaline Anodes for Long-Cycle Energy Storage

Damon E. Turney et al.

CHEMISTRY OF MATERIALS (2017)

Article Electrochemistry

The Study of Industrial Aluminum Alloy as Anodes for Aluminum-Air Batteries in Alkaline Electrolytes

Liang Fan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Review Energy & Fuels

Alkaline aqueous electrolytes for secondary zinc-air batteries: an overview

Aroa R. Mainar et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2016)

Article Chemistry, Physical

Water soluble graphene as electrolyte additive in magnesium-air battery system

M. Mayilvel Dinesh et al.

JOURNAL OF POWER SOURCES (2015)

Article Chemistry, Physical

Double liquid electrolyte for primary Mg batteries

Junlin Du et al.

JOURNAL OF POWER SOURCES (2014)

Review Chemistry, Multidisciplinary

Magnesium-air batteries: from principle to application

Tianran Zhang et al.

MATERIALS HORIZONS (2014)

Article Chemistry, Physical

Performance of Mg-14Li-A-1Al-0 1Ce as anode for Mg-air battery

Yibin Ma et al.

JOURNAL OF POWER SOURCES (2011)

Article Materials Science, Multidisciplinary

The negative difference effect of magnesium and of the AZ91 alloy in chloride and stannate-containing solutions

T. R. Thomaz et al.

CORROSION SCIENCE (2010)

Article Materials Science, Multidisciplinary

Corrosion behaviour of magnesium sacrificial anodes in tap water

M Andrei et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2003)