4.8 Article

Understanding Decomposition of Electrolytes in All-Solid-State Lithium-Sulfur Batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Solid Electrolyte with Oxidation Tolerance Provides a High-Capacity Li2S-Based Positive Electrode for All-Solid-State Li/S Batteries

Takashi Hakari et al.

Summary: This study determined the oxidation onset voltages (OOVs) of several SEs compatible with Li2S as high-capacity positive electrode materials, indicating that SEs with low OOVs decrease capacity and increase interfacial resistance in corresponding ASSBs; SEs must have OOVs exceeding Li2S by more than 0.2 V to achieve high capacity, which depends on SE ionic conductivity.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Elucidating the Role of Microstructure in Thiophosphate Electrolytes - a Combined Experimental and Theoretical Study of β-Li3PS4

Tugce Ates et al.

Summary: Solid-state batteries, with optimized solid electrolytes, have the potential to exceed the energy densities of lithium-ion batteries. In this study, the microstructure of beta-LPS electrolyte and its impact on electrochemical performance were investigated. It was found that beta-LPS electrolyte pellets with higher porosity and larger particle size exhibited higher ionic conductivity and improved cycling stability.

ADVANCED SCIENCE (2022)

Article Engineering, Environmental

Engineering high conductive Li7P2S8I via Cl- doping for all-solid-state Li-S batteries workable at different operating temperatures

Zhongkai Wu et al.

Summary: This study improves the conductivity of Li7P2S8I electrolyte through Cl- doping and optimizing the hot-press technique. The optimized electrolyte exhibits enhanced discharge capacity and capacity retention at different temperatures, and demonstrates excellent lithium compatibility and dendrite suppression capability.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Li2S-LiI Solid Solutions with Ionic Conductive Domains for Enhanced All-Solid-State Li/S Batteries

Yushi Fujita et al.

Summary: Lithium sulfur batteries are promising due to their high energy densities. This study investigates the charge-discharge mechanism of a Li2S-LiI solid solution in all-solid-state batteries, achieving high reversible capacity. The formation of an ionic conductive structure rich in LiI enables nearly fully solid phase S/Li2S reactions in all-solid-state batteries.

ACS APPLIED ENERGY MATERIALS (2022)

Article Electrochemistry

Electrochemical redox of Li2S-CaS and -CaX2 (X = Cl, Br, and I) cathode materials for all-solid-state lithium-sulfur batteries

Hirotada Gamo et al.

Summary: In this study, Li2S-CaS and -CaX2 (X = Cl, Br, and I) cathode materials prepared by high-energy ball milling were evaluated in all-solid-state lithium-sulfur batteries. The 85Li(2)S.15CaS cathode showed the highest capacity after 15 cycles, and the addition of CaX2 (X = Cl, Br, and I) increased the Li-ion diffusion coefficient of cathode materials. Among the fabricated cathodes, the 90Li(2)S.10CaI(2) cathode material exhibited excellent capacity, performance stability, and reversibility.

ELECTROCHIMICA ACTA (2022)

Review Chemistry, Multidisciplinary

Li2S-Based Li-Ion Sulfur Batteries: Progress and Prospects

Jicheng Jiang et al.

Summary: The research progress and challenges of Li2S-based Li-ion sulfur batteries (LISBs) are reviewed, with a focus on the optimization of their performance. The use of lithium-metal-free anodes in LISBs provides a convenient and effective way to avoid the challenges associated with lithium metal in practical Li-S batteries. Perspectives on the future direction of the research of LISBs are proposed at the end.
Review Chemistry, Multidisciplinary

Lithium/Sulfide All-Solid-State Batteries using Sulfide Electrolytes

Jinghua Wu et al.

Summary: All-solid-state lithium batteries (ASSLBs) are considered the next generation electrochemical energy storage devices due to their high safety and energy density, along with simple packaging and wide operable temperature range. The sulfide electrolytes, with the highest ionic conductivity among solid-state electrolytes, face challenges such as narrow electrochemical stability window, unstable electrode/electrolyte interfaces, and lithium dendrite formation. Research on emerging sulfide electrolytes and preparation methods is ongoing, focusing on achieving required properties for stable electrochemical performance and compatible interfaces in ASSLBs.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Linking Solid Electrolyte Degradation to Charge Carrier Transport in the Thiophosphate-Based Composite Cathode toward Solid-State Lithium-Sulfur Batteries

Saneyuki Ohno et al.

Summary: This study investigates the enhancement of solid-state lithium-sulfur batteries, demonstrating improved capacity retention with high areal capacity after 100 cycles at room temperature. The research findings are applicable to any solid-state composite with electrically insulating active materials.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Fast Li-ion Conductor of Li3HoBr6 for Stable All-Solid-State Lithium-Sulfur Battery

Xiaomeng Shi et al.

Summary: A new rare-earth based solid halide electrolyte Li3HoBr6 (LHB) with high Li ion conductivity and wider electrochemical window has been synthesized, showing potential application in all-solid-state batteries. The LHB also exhibits good cycling stability and Coulombic efficiency in Li-Sulfur ASSBs.

NANO LETTERS (2021)

Article Multidisciplinary Sciences

Growth of lithium-indium dendrites in all-solid-state lithium-based batteries with sulfide electrolytes

Shuting Luo et al.

Summary: This study investigates the growth of Li-In dendritic structures in all-solid-state lithium-based batteries and the resulting short circuits, highlighting the differences between Li-In dendrites and lithium dendrites, as well as discussing the instability of Li-In electrodes towards sulfide solid electrolytes.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements

Ming Liu et al.

Summary: The key challenge in the development of solid-state batteries is designing electrode-electrolyte interfaces that combine (electro)chemical and mechanical stability with easy Li-ion transport. This study demonstrates the beneficial effect of an inorganic coating on the overall cell stability and performance, as well as the impact on local Li-ion transport over grain boundaries. Through exchange-NMR measurements, the equilibrium between various phases at the interface and the positive electrode-solid electrolyte interface is quantified.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Influence of Crystallinity of Lithium Thiophosphate Solid Electrolytes on the Performance of Solid-State Batteries

Shuo Wang et al.

Summary: Solid electrolytes play a crucial role in defining the properties of all-solid-state batteries. This study investigates the impact of crystallinity on the performance of solid electrolytes, revealing that glass/glass-ceramic electrolytes show better cycling and rate performance compared to crystalline counterparts. Furthermore, the decomposition behavior of solid electrolytes at typical cathode potentials is studied, with crystalline electrolytes showing higher electronic partial conductivity leading to more degradation in composite cathodes.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Insights into the Rich Polymorphism of the Na+ Ion Conductor Na3PS4 from the Perspective of Variable-Temperature Diffraction and Spectroscopy

Theodosios Famprikis et al.

Summary: This study investigates the structure and dynamics evolution of Na3PS4 over a wide temperature range through combined experimental-computational analysis, revealing the polymorphic transitions and dynamic behavior associated with different phases at varying temperatures. These findings provide insights into the rich polymorphism of Na3PS4 and its relevance for high-performance materials derived from its structural archetype.

CHEMISTRY OF MATERIALS (2021)

Article Chemistry, Physical

In-situ generated Li2S-based composite cathodes with high mass and capacity loading for all-solid-state Li-S batteries

Huize Jiang et al.

Summary: All-solid-state Li-S batteries assembled with inorganic solid electrolyte have high safety and theoretical energy density, but the interfaces among components in composite cathodes have been a key factor affecting performance. In-situ chemical reactions such as thermal reduction and in-situ growth can be employed to improve interface performance by constructing conductive and ionic channels on the surface of Li2S.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Lithium Argyrodite as Solid Electrolyte and Cathode Precursor for Solid-State Batteries with Long Cycle Life

Shuo Wang et al.

Summary: This study reports the in-situ formation of active materials in all-solid-state batteries through electrochemical decomposition, improving the performance of solid-state batteries. Comprehensive characterization, including operando pressure monitoring, reveals a co-redox process of two redox-active elements during cycling.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Toward Practical Solid-State Lithium-Sulfur Batteries: Challenges and Perspectives

Saneyuki Ohno et al.

Summary: Solid-state lithium-sulfur batteries offer high energy density and safety benefits by using sulfur as conversion-type material, but challenges include overcoming contact losses caused by volume changes of active materials and complexities in composite materials.

ACCOUNTS OF MATERIALS RESEARCH (2021)

Review Chemistry, Multidisciplinary

Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes

Abhik Banerjee et al.

CHEMICAL REVIEWS (2020)

Article Chemistry, Physical

Electrochemical Redox Behavior of Li Ion Conducting Sulfide Solid Electrolytes

Tushar Swamy et al.

CHEMISTRY OF MATERIALS (2019)

Article Nanoscience & Nanotechnology

Stable Cycling Lithium-Sulfur Solid Batteries with Enhanced Li/Li10GeP2S12 Solid Electrolyte Interface Stability

Ediga Umeshbabu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Amorphous versus Crystalline Li3PS4: Local Structural Changes during Synthesis and Li Ion Mobility

Heike Stoeffler et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Article Chemistry, Physical

Elucidating Reversible Electrochemical Redox of Li6PS5CI Solid Electrolyte

Darren H. S. Tan et al.

ACS ENERGY LETTERS (2019)

Article Chemistry, Physical

All-Solid-State Batteries with Thick Electrode Configurations

Yuki Kato et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Article Chemistry, Physical

Impact of Cathode Material Particle Size on the Capacity of Bulk-Type All-Solid-State Batteries

Florian Strauss et al.

ACS ENERGY LETTERS (2018)

Article Chemistry, Multidisciplinary

Comparing the Descriptors for Investigating the Influence of Lattice Dynamics on Ionic Transport Using the Superionic Conductor Na3PS4-xSex

Thorben Krauskopf et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Green & Sustainable Science & Technology

Li2S-Based Solid Solutions as Positive Electrodes with Full Utilization and Superlong Cycle Life in All-Solid-State Li/S Batteries

Takashi Hakari et al.

ADVANCED SUSTAINABLE SYSTEMS (2017)

Article Chemistry, Physical

High-capacity Li2S-nanocarbon composite electrode for all-solid-state rechargeable lithium batteries

Motohiro Nagao et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Review Chemistry, Multidisciplinary

A Berzelius Reagent, Phosphorus Decasulfide (P4S10), in Organic Syntheses

Turan Ozturk et al.

CHEMICAL REVIEWS (2010)

Article Electrochemistry

All-Solid-State Lithium Secondary Battery with Li2S-C Composite Positive Electrode Prepared by Spark-Plasma-Sintering Process

Tomonari Takeuchi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Article Electrochemistry

All-solid-state Li/S batteries with highly conductive glass-ceramic electrolytes

A Hayashi et al.

ELECTROCHEMISTRY COMMUNICATIONS (2003)