☆ 4.6 Article

A simplified and effective molecular-level kinetic model for plastic pyrolysis

CHEMICAL ENGINEERING SCIENCE (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

A mass-temperature decoupled discretization strategy for large-scale molecular-level kinetic model

Zhengyu Chen et al.

Summary: This study proposes a mass-temperature decoupled discretization strategy for large-scale molecular-level kinetic models, aiming to reduce computational time. The method divides the reactor into isothermal segments and replaces the heat balance differential equations with algebraic equations, separating the calculations of mass balance and heat balance.

CHEMICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Thermodynamics

Role of temperature in the biomass steam pyrolysis in a conical spouted bed reactor

Enara Fernandez et al.

Summary: The steam pyrolysis of pinewood sawdust yielded high bio-oil production potential, with increased gas and decreased liquid and char yields as temperature rose. The composition of the liquid fraction was significantly influenced by temperature, with varying components.

ENERGY (2022)

添加到收藏夹

Article Engineering, Chemical

Molecular-level kinetic modeling of heavy oil fluid catalytic cracking process based on hybrid structural unit and bond-electron matrix

Zhengyu Chen et al.

Summary: A heavy petroleum fluid catalytic cracking (FCC) process model based on the SU-BEM framework was developed to represent complex molecular reaction networks. The model showed good agreement with experimental values after parameter estimation, predicting product yields as the variable of interest.

AICHE JOURNAL (2021)

添加到收藏夹

Review Polymer Science

Pyrolysis of Polystyrene Waste: A Review

Ibrahim M. Maafa

Summary: The manufacturing and waste disposal of polystyrene have raised concerns about environmental and energy issues. Despite some drawbacks, energy recovery techniques show great potential for development.

POLYMERS (2021)

添加到收藏夹

Article Thermodynamics

Pyrolysis of plastic wastes in a fountain confined conical spouted bed reactor: Determination of stable operating conditions

Santiago Orozco et al.

Summary: This study aims to determine the optimal conditions for stable operation in the pyrolysis of waste plastics, focusing on improving gas-solid contact. The research results indicate that polymers with low decomposition temperatures or high branching degrees require lower operating temperatures, and increasing the bed mass to plastic feed rate ratio and spouting velocity can reduce the temperature needed to avoid defluidization. Additionally, the use of a catalyst can effectively lower the temperature required for stable operation by reducing the activation energy of cracking reactions.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Chemistry, Analytical

CFD modeling and experimental validation of biomass fast pyrolysis in a conical spouted bed reactor

Bahar Hooshdaran et al.

Summary: This study applied a 2D Euler-Euler multiphase CFD model with the KTGF theory to describe biomass pyrolysis in a spouted bed reactor. By coupling a CFD hydrodynamic model with a pyrolysis kinetic model, the study successfully predicted biomass pyrolysis product yields, demonstrating the potential of CFD techniques for reactor design and optimization.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)

添加到收藏夹

Article Energy & Fuels

Insight into Polyethylene and Polypropylene Pyrolysis: Global and Mechanistic Models

Rebecca E. Harmon et al.

Summary: A comparison of pyrolysis models for polyethylene and polypropylene suggests that mechanistic modeling could be a valuable complement to understand additional effects in polymer decomposition.

ENERGY & FUELS (2021)

添加到收藏夹

Review Thermodynamics

The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions

Onur Dogu et al.

Summary: Chemical recycling of solid plastic waste is crucial for reducing pollution, enabling circular economy. Pyrolysis and gasification technologies show promise in reducing greenhouse gas emissions, but require improved understanding of chemistry and innovative reactor designs.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Conversion of HDPE into Value Products by Fast Pyrolysis Using FCC Spent Catalysts in a Fountain Confined Conical Spouted Bed Reactor

Santiago Orozco et al.

Summary: The study shows that continuous catalytic cracking of polyethylene over a spent FCC catalyst can achieve high catalyst activity and effectively recycle plastics at high temperatures, resulting in olefin products mainly composed of C5-C11 hydrocarbons.

CHEMSUSCHEM (2021)

添加到收藏夹

Article Energy & Fuels

Reaction Kinetic Model of Naphtha-Methanol Catalytic Conversion for Light Olefins over HZSM-5 Based on Structure-Oriented Lumping

Qitong Cheng et al.

Summary: The study focused on the naphtha-methanol coupling conversion catalyzed by HZSM-5, with a structured lumping (SOL) kinetic model developed to predict product distributions. Significant improvements in naphtha conversion rate and light olefin yield were achieved using this approach.

ENERGY & FUELS (2021)

添加到收藏夹

Article Energy & Fuels

Molecular-level heavy petroleum hydrotreating modeling and comparison with high-resolution mass spectrometry

Dong Guan et al.

Summary: This paper focuses on constructing a heavy petroleum compositional model and hydrotreating process model with a more accurate molecular detail using high-resolution mass spectrometry data. Over 12,000 representative molecules were constructed to form a heavy petroleum molecular structure library, and 18 reaction rules were formulated to express the molecular conversion pathways. The model parameters were globally optimized according to experimental data, showing good agreement with bulk property data and high-resolution mass spectrometry data.

FUEL (2021)

添加到收藏夹

Article Energy & Fuels

Fast pyrolysis of date palm biomass using Py-GCMS

Gmar Bensidhom et al.

Summary: Fast pyrolysis of Date Palm Petiole and Date Palm Seed biomass was conducted at different temperatures to study the effect on product distribution. Temperature greatly influenced the concentration of components in the volatile stream, with the most abundant compound identified as levoglucosan, derived from cellulose degradation. Understanding the product composition is crucial for developing large scale fast pyrolysis units for valorizing Tunisian agricultural wastes.

JOURNAL OF THE ENERGY INSTITUTE (2021)

添加到收藏夹

Article Engineering, Chemical

Moving from postdictive to predictive kinetics in reaction engineering

William H. Green

AICHE JOURNAL (2020)

添加到收藏夹

Article Energy & Fuels

A TG-FTIR investigation on the co-pyrolysis of the waste HDPE, PP, PS and PET under high heating conditions

R. K. Singh et al.

JOURNAL OF THE ENERGY INSTITUTE (2020)

添加到收藏夹

Article Chemistry, Physical

Predicting Chemical Reaction Barriers with a Machine Learning Model

Aayush R. Singh et al.

CATALYSIS LETTERS (2019)

添加到收藏夹

Article Engineering, Chemical

Molecular-level kinetic modelling of fluid catalytic cracking slurry oil hydrotreating

Zhengyu Chen et al.

CHEMICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Engineering, Chemical

Discerning complex reaction networks using automated generators

Sergio Vernuccio et al.

AICHE JOURNAL (2019)

添加到收藏夹

Article Energy & Fuels

Molecular-Level Kinetic Modeling of Triglyceride Hydroprocessing

Pratyush Agarwal et al.

ENERGY & FUELS (2019)

添加到收藏夹

Article Energy & Fuels

Generating Data-Driven Models from Molecular-Level Kinetic Models: A Kinetic Model Speedup Strategy

Pratyush Agarwal et al.

ENERGY & FUELS (2019)

添加到收藏夹

Article Energy & Fuels

Molecular-Level Kinetic Modeling of a Real Vacuum Gas Oil Hydroprocessing Refinery System

Pratyush Agarwal et al.

ENERGY & FUELS (2019)

添加到收藏夹

Review Green & Sustainable Science & Technology

Challenges associated with plastic waste disposal and allied microbial routes for its effective degradation: A comprehensive review

Rucha V. Moharir et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Chemistry, Applied

Molecular Weight Distribution of Polymers Produced by Anionic Polymerization Enables Mixability Evaluation

Yuta Endo et al.

ORGANIC PROCESS RESEARCH & DEVELOPMENT (2019)

添加到收藏夹

Article Energy & Fuels

Molecular-Level Kinetic Modeling of Methyl Laurate: The Intrinsic Kinetics of Triglyceride Hydroprocessing

Pratyush Agarwal et al.

ENERGY & FUELS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Monomer recovery through advanced pyrolysis of waste high density polyethylene (HDPE)

Laura S. Diaz-Silvarrey et al.

GREEN CHEMISTRY (2018)

添加到收藏夹

Article Energy & Fuels

Molecular-Level Kinetic Modeling of Lube Base Oil Hydroisomerization

Nicholas Evenepoel et al.

ENERGY & FUELS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A kinetic model for in situ coking denitrification of heavy oil with high nitrogen content based on starch using a structure-oriented lumping method

Zhongwen He et al.

RSC ADVANCES (2018)

添加到收藏夹

Article Energy & Fuels

Kinetic Modeling of the Catalytic Steam Reforming of High-Density Polyethylene Pyrolysis Volatiles

Itsaso Barbarias et al.

ENERGY & FUELS (2017)

添加到收藏夹

Article Environmental Sciences

Effect of solid waste landfill organic pollutants on groundwater in three areas of Sicily (Italy) characterized by different vulnerability

Serena Indelicato et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2017)

添加到收藏夹

Article Engineering, Chemical

Molecular-Level-Process Model with Feedback of the Heat Effects on a Complex Reaction Network in a Fluidized Catalytic Cracking Process

Jichang Liu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

添加到收藏夹

Article Engineering, Environmental

Mechanical and chemical recycling of solid plastic waste

Kim Ragaert et al.

WASTE MANAGEMENT (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Production, use, and fate of all plastics ever made

Roland Geyer et al.

SCIENCE ADVANCES (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Chemical recycling of waste plastics for new materials production

AliReza Rahimi et al.

NATURE REVIEWS CHEMISTRY (2017)

添加到收藏夹

Article Energy & Fuels

Implementation of a Molecular-Level Kinetic Model for Plasma-Arc Municipal Solid Waste Gasification

Scott R. Horton et al.

ENERGY & FUELS (2016)

添加到收藏夹

Review Thermodynamics

A review on pyrolysis of plastic wastes

Shafferina Dayana Anuar Sharuddin et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Chemistry, Analytical

HDPE pyrolysis-steam reforming in a tandem spouted bed-fixed bed reactor for H2 production

Aitziber Erkiaga et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)

添加到收藏夹

Article Engineering, Environmental

Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor

Maite Artetxe et al.

WASTE MANAGEMENT (2015)

添加到收藏夹

Article Engineering, Chemical

Molecular-Level Kinetic Modeling of Resid Pyrolysis

Scott R. Horton et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)

添加到收藏夹

Article Chemistry, Analytical

SEDFIT-MSTAR: molecular weight and molecular weight distribution analysis of polymers by sedimentation equilibrium in the ultracentrifuge

Peter Schuck et al.

ANALYST (2014)

添加到收藏夹

Article Engineering, Environmental

Principal component analysis for kinetic scheme proposal in the thermal pyrolysis of waste HDPE plastics

Roberto Aguado et al.

CHEMICAL ENGINEERING JOURNAL (2014)

添加到收藏夹

Article Engineering, Chemical

The Use of Instantaneous Distributions in Polymerization Reaction Engineering

Joao B. P. Soares

MACROMOLECULAR REACTION ENGINEERING (2014)

添加到收藏夹

Article Energy & Fuels

An Introduction to the Lump Kinetics Model and Reaction Mechanism of FCC Gasoline

X. Kang et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2013)

添加到收藏夹

Article Engineering, Chemical

Product Yields and Compositions in the Continuous Pyrolysis of High-Density Polyethylene in a Conical Spouted Bed Reactor

Gorka Elordi et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)

添加到收藏夹

Article Engineering, Chemical

Kinetic study of high density polyethylene (HDPE) pyrolysis

S. M. Al-Salem et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2010)

添加到收藏夹

Article Engineering, Chemical

Attribute-Based Modeling of Resid Structure and Reaction

Darin M. Campbell et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Analyzing the Molecular Weight Distribution in Supramolecular Polymers

Stephan A. Schmid et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

Article Thermodynamics

Characterisation of heavy petroleum fractions using modified molecular-type homologous series (MTHS) representation

Juan Gomez-Prado et al.

ENERGY (2008)

添加到收藏夹

Article Chemistry, Applied

Computer aided kinetic modeling with KMT and KME

Wei Wei et al.

FUEL PROCESSING TECHNOLOGY (2008)

添加到收藏夹

Article Polymer Science

Molecular weight distribution of living radical polymers - 1. Fundamental distribution

H Tobita

MACROMOLECULAR THEORY AND SIMULATIONS (2006)

添加到收藏夹

Article Engineering, Chemical

Extension of structure-oriented lumping to vacuum residua

SB Jaffe et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)

添加到收藏夹

Article Engineering, Environmental

Kinetics of polystyrene pyrolysis in a conical spouted bed reactor

R Aguado et al.

CHEMICAL ENGINEERING JOURNAL (2003)

添加到收藏夹

Article Polymer Science

Mechanistic modeling of polymer degradation: A comprehensive study of polystyrene

TM Kruse et al.

MACROMOLECULES (2002)

添加到收藏夹

Article Engineering, Chemical

Detailed mechanistic modeling of polymer degradation: application to polystyrene

TM Kruse et al.

CHEMICAL ENGINEERING SCIENCE (2001)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Development of waste plastics injection process in blast furnace

M Asanuma et al.

ISIJ INTERNATIONAL (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.