☆ 4.6 Article

Numerical investigation of erosion characteristics of coupling separators with different conical profiles

CHEMICAL ENGINEERING RESEARCH & DESIGN (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Numerical investigation of air-injected deoiling hydrocyclones using population balance model

Ramin Raesi et al.

Summary: The study demonstrates that air injection has a significant impact on the efficiency of oil-water separators, increasing separation efficiency and turbulence level. Proper adjustment of the air-liquid ratio and injected bubble diameter is necessary to maximize efficiency.

CHEMICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

Impact of non-uniform surface roughness on the erosion rate and performance of a cyclone separator

Ehsan Dehdarinejad et al.

Summary: The present study investigates the influence of non-uniform surface roughness on the performance and erosion rate of a Staimand cyclone separator. The results reveal that non-uniform surface roughness significantly affects the flow pattern, collection efficiency, erosion rate, and pressure drop.

CHEMICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Impact of cone wall roughness on turbulence swirling flow in a cyclone separator

Ehsan Dehdarinejad et al.

Summary: The influence of cyclone cone wall roughness on swirling flow characteristics was evaluated in this study. The results showed that cone roughness enhances tangential and axial velocities, decreases pressure drop, and affects the cutoff size diameter.

CHEMICAL PAPERS (2022)

添加到收藏夹

Article Chemistry, Applied

Vortex- assisted liquid- liquid microextraction for the trace determination of potassium bromate in flour food products

Mehrnoosh Sadeghi et al.

Summary: A green and novel preconcentration and microextraction method combined with UV-Vis spectrophotometry was developed for the trace determination of Potassium Bromate in food samples. The method showed high linearity, low detection limits and quantitation limits, and good precision.

FOOD CHEMISTRY (2022)

添加到收藏夹

Article Engineering, Chemical

Computational fluid dynamics and experimental investigation of inlet flow rate effects on separation performance of desanding hydrocyclone

Zhenjiang Zhao et al.

Summary: This study focused on the standard hydrocyclone and investigated its internal flow field variation and separation efficiency through experiments and numerical simulations. The results showed that the standard hydrocyclone can achieve high separation efficiency and minimize energy losses within a specific flow rate range.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Chemical

On the performance of cyclone separators with different shapes of the conical section using CFD

Satyanand Pandey et al.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Chemical

An Overview of Numerical Simulations on Gas-Solid Cyclone Separators with Tangential Inlet

Ehsan Dehdarinejad et al.

Summary: Cyclone separators play a dominant role in various fields and their performance criteria include separation mechanism, pressure drop, and collection efficiency. Numerical simulations help understand the impact of different parameters on cyclone performance and provide some suggestions based on previous simulations.

CHEMBIOENG REVIEWS (2021)

添加到收藏夹

Article Engineering, Chemical

Effects of droplet dynamic characteristics on the separation performance of a demulsification and dewatering device coupling electric and centrifugal fields

Haifeng Gong et al.

Summary: This study investigated the separation performance of a demulsification and dewatering device coupled with high-voltage electric and swirling centrifugal fields. The research showed that voltage and inlet flow rate play significant roles in separation efficiency and droplet breakage, highlighting the importance of dynamic characteristics of droplets in the oil-water separation process.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

添加到收藏夹

Article Energy & Fuels

Composition characteristics of siloxane derived waste lubricating oil and its effect on low-rank coal flotation

Zhe Yang et al.

Summary: WSMO is an effective collector for promoting LRC flotation by improving the hydrophobicity of the LRC surface and enhancing flotation efficiency.

FUEL (2021)

添加到收藏夹

Article Engineering, Chemical

Numerical analysis on the effect of the length of arc-shaped vortex finder on the hydrocyclone's flow field and separation performance

Feng Li et al.

Summary: The use of an arc-shaped vortex finder in a hydrocyclone can effectively reduce short-circuit flow and improve particle separation. Increasing the arc length led to a rise and then a drop in tangential velocity and pressure drop, with the most efficient separation achieved at an arc length of 30 mm.

MINERALS ENGINEERING (2021)

添加到收藏夹

Review Energy & Fuels

Stabilization mechanism and chemical demulsification of water-in-oil and oil-in-water emulsions in petroleum industry: A review

Duo Wang et al.

Summary: Emulsions frequently encountered in petroleum production pose technical challenges and increase costs. Chemical treatment with demulsifiers plays a vital role in destabilizing the complex emulsions, but developing effective and cost-efficient demulsifiers remains challenging. This review systematically examines the stabilization mechanisms of emulsions and categorizes demulsifiers for water-in-oil and oil-in-water emulsions, providing insights into efficient demulsification methods.

FUEL (2021)

添加到收藏夹

Article Engineering, Chemical

Computational fluid dynamics study of the impact of surface roughness on cyclone performance and erosion

J. Foroozesh et al.

Summary: The study investigated the impact of cyclone wall roughness on erosion rate and cyclone performance using CFD technique with Ansys-Fluent software. The results showed that wall roughness significantly influenced airflow behavior and cyclone performance, with an increase in roughness leading to a decrease in wear rate. Additionally, solid loading and inlet gas velocity were found to have a substantial effect on erosion rate, even more so than particle size.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Research on the structure of the cylindrical hydrocyclone spigot to mitigate the misplacement of particles

Duanxu Hou et al.

Summary: This paper investigates the flow field characteristics and separation performance of cylindrical hydrocyclones with different spigot upper diameters using the TFM model. The study finds that the spigot upper diameter significantly impacts the separation efficiency, with both undersize and oversize diameters leading to particle misplacement and negative classification performance.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Modeling of solid-particle effects on bubble breakage and coalescence in slurry bubble columns

Adam Muehlbauer et al.

Summary: This study presents three approaches to modify bubble breakup and coalescence models in order to account for the impact of solid particles on bubble coalescence behavior. By coupling CFD with PBE, the gas-liquid-solid flow in a slurry bubble column is simulated, and the impact of the modifications on the simulated results is evaluated. The capabilities, differences, and limitations of the approaches are demonstrated and explained in the context of a reference simulation case with experimental data.

EXPERIMENTAL AND COMPUTATIONAL MULTIPHASE FLOW (2021)

添加到收藏夹

Article Biophysics

Liquid-Liquid Phase Separation of Histone Proteins in Cells: Role in Chromatin Organization

Anisha Shakya et al.

BIOPHYSICAL JOURNAL (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical study of vortex eccentricity in a gas cyclone

Sijie Dong et al.

APPLIED MATHEMATICAL MODELLING (2020)

添加到收藏夹

Article Engineering, Chemical

Simulation of the coalescence and breakup of water-in-oil emulsion in a separation device strengthened by coupling electric and swirling centrifugal fields

Haifeng Gong et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

Study on oil-water two-phase flow characteristics of the hydrocyclone under periodic excitation

Sen Li et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2020)

添加到收藏夹

Article Energy & Fuels

A lignin-based carbon aerogel enhanced by graphene oxide and application in oil/water separation

Yi Meng et al.

FUEL (2020)

添加到收藏夹

Article Engineering, Mechanical

Prediction of erosive wear locations in centrifugal compressor using CFD simulation and comparison with experimental model

Mohit Biglarian et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Chemical

Innovative design and study of an oil-water coupling separation magnetic hydrocyclone

Lin Liu et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Chemical

Structural optimization of a demulsification and dewatering device coupled with swirl centrifugal and high-voltage fields by response surface methodology combined with numerical simulation

Haifeng Gong et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)

添加到收藏夹

Article Chemistry, Physical

Application of population balance equations and interaction models in CFD simulation of the bubble distribution in dissolved air flotation

J. P. Rodrigues et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Impact of Particle Size on Droplet Coalescence in Solid-Stabilized High Internal Phase Emulsions

Max Kaganyuk et al.

LANGMUIR (2019)

添加到收藏夹

Article Engineering, Chemical

Simulation on performance of a demulsification and dewatering device with coupling double fields: Swirl centrifugal field and high-voltage electric field

Haifeng Gong et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

Numerical investigation of effects of inner cone on flow field, performance and erosion rate of cyclone separators

Farzad Parvaz et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

Experimental and simulation of a novel hydrocyclone-tubular membrane as overflow pipe

Chu-Chiao Wang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

Experiments and CFD-based erosion modeling for gas-solids flow in cyclones

Thiana Alexandra Sedrez et al.

POWDER TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Chemical

Design of liquid-liquid separation hydrocyclones using parabolic and hyperbolic swirl chambers for efficiency enhancement

Abdul Motin et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)

添加到收藏夹

Article Engineering, Chemical

Study on inertial capture of particles by a droplet in a wide Reynolds number range

Ao Wang et al.

JOURNAL OF AEROSOL SCIENCE (2016)

添加到收藏夹

Article Energy & Fuels

Numerical analysis of hydroabrasion in a hydrocyclone

Mehdi Azimian et al.

PETROLEUM SCIENCE (2016)

添加到收藏夹

Article Engineering, Chemical

Experimental and computational study of erosion in elbows due to sand particles in air flow

Ronald E. Vieira et al.

POWDER TECHNOLOGY (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Numerical investigation of the effects of the central channel on the flow field in an oil-gas cyclone separator

Xiang Gao et al.

COMPUTERS & FLUIDS (2014)

添加到收藏夹

Article Engineering, Chemical

Numerical analysis of hydrocyclones with different conical section designs

M. Ghodrat et al.

MINERALS ENGINEERING (2014)

添加到收藏夹

Article Engineering, Chemical

Prediction of wear and its effect on the multiphase flow and separation performance of dense medium cyclone

K. W. Chu et al.

MINERALS ENGINEERING (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Numerical Analysis of Drops Coalescence and Breakage Effects on De-Oiling Hydrocyclone Performance

S. Noroozi et al.

SEPARATION SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Article Engineering, Chemical

Modeling fluid behavior and droplet interactions during liquid-liquid separation in hydrocyclones

Steffen Schuetz et al.

CHEMICAL ENGINEERING SCIENCE (2009)

添加到收藏夹

Article Engineering, Chemical

Innovative Hydrocyclone Inlet Designs to Reduce Erosion-Induced Wear in Mineral Dewatering Processes

Peng Xu et al.

DRYING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Chemical

Optimizing hydrocyclone design using advanced CFD model

TJ Olson et al.

MINERALS ENGINEERING (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.