4.7 Article

Natural sedimentation-assisted fabrication of Janus functional films for versatile applications in Joule heating, electromagnetic interference shielding and triboelectric nanogenerator

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Triboelectric nanogenerator based on flexible Janus nanofiber membrane with simultaneous high charge generation and charge capturing abilities

Yunrui Xie et al.

Summary: In this study, a new type of triboelectric nanogenerator (TENG-JNM) based on a flexible two-dimensional Janus nanofiber membrane (JNM) and PMMA nanobelt array was assembled. By pre-assembling different functional substances into the Janus nanofiber, charge generation and capture capabilities were achieved at the microscopic level, allowing the two-dimensional JNM to serve as both the charge generation and capture layer of the TENG-JNM. The TENG-JNM demonstrated high and adjustable output performance, and enabled visualization of its working state in a dark environment.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Multidisciplinary

Multifunctional Wearable Silver Nanowire Decorated Leather Nanocomposites for Joule Heating, Electromagnetic Interference Shielding and Piezoresistive Sensing

Zhonglei Ma et al.

Summary: This article presents a fabrication method for multifunctional wearable electronic devices based on natural materials. The nanocomposites made of silver nanowire-decorated leather exhibit hierarchical structures and integrated functionalities such as visual Joule heating, electromagnetic interference shielding, and piezoresistive sensing. These devices are applicable in energy conversion, electronic skin, and artificial intelligence.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Physical

Janus (BNNS/ANF)-(AgNWs/ANF) thermal conductivity composite films with superior electromagnetic interference shielding and Joule heating performances

Yixin Han et al.

Summary: In this study, Janus (BNNS/ANF)-(AgNWs/ANF) composite films were successfully prepared, which exhibited one side insulating, one side conducting performance. The composite films showed high thermal conductivity, superior electromagnetic interference shielding effectiveness, good mechanical properties, stable temperature-voltage response characteristics, and reliable electrical stability.

NANO RESEARCH (2022)

Article Chemistry, Physical

Enhanced energy harvesting performance of triboelectric nanogenerator via efficient dielectric modulation dominated by interfacial interaction

Zhongqian Song et al.

Summary: Introducing MXene Ti3C2Tx and Ti3CNTx into PVDF enables efficient dielectric modulation, significantly enhancing charge trapping capacity and surface charge density. The optimized TENG device based on PVDF/Ti3CNTx exhibits higher power density, providing guidance for designing advanced triboelectric materials and calling for more exploration of fundamental mechanisms.

NANO ENERGY (2022)

Article Chemistry, Multidisciplinary

Perception-to-Cognition Tactile Sensing Based on Artificial-Intelligence-Motivated Human Full-Skin Bionic Electronic Skin

Hongsen Niu et al.

Summary: A full-skin bionic electronic skin driven by artificial intelligence (AI) is proposed, which exhibits high sensitivity and fast response/recovery time. It can evolve from tactile perception to intelligent tactile cognition, and can achieve real-time cognition of object material species and locations via one contact. It has broad application prospects.

ADVANCED MATERIALS (2022)

Article Chemistry, Physical

Micro-diamond assisted bidirectional tuning of thermal conductivity in multifunctional graphene nanoplatelets/nanofibrillated cellulose films

Yinhang Zhang et al.

Summary: This study proposes a strategy to construct thermal interface materials (TIMs) with bidirectional high thermal conductivity by incorporating micron-diamonds (MDs) in graphene nanoplatelets/nanofibrillated cellulose (GNPs/NFC) composite film. The loading and particle size of MDs can be adjusted to achieve high thermal conductivity in both in-plane and through-plane directions.

CARBON (2022)

Article Engineering, Environmental

Natural rubber toughened carbon nanotube buckypaper and its multifunctionality in electromagnetic interference shielding, thermal conductivity, Joule heating and triboelectric nanogenerators

Mingshuai Fan et al.

Summary: A new type of multifunctional natural rubber-toughened carbon nanotube buckypaper with excellent comprehensive performance was successfully fabricated in this study. It exhibited improved mechanical properties, maintained conductivity, and demonstrated high EMI shielding efficiency, showing great potential for wearable electronic devices.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Multidisciplinary

A Trimode Thermoregulatory Flexible Fibrous Membrane Designed with Hierarchical Core-Sheath Fiber Structure for Wearable Personal Thermal Management

Jiajia Wu et al.

Summary: This article introduces a fibrous membrane-based textile that achieves trimode thermal management through a specially designed structure. The textile has high heat enthalpy density and excellent photothermal conversion performance, making it suitable for all-day, energy-saving, and wearable individual thermal management applications.

ACS NANO (2022)

Article Engineering, Multidisciplinary

Lotus leaf-inspired and multifunctional Janus carbon felt@Ag composites enabled by in situ asymmetric modification for electromagnetic protection and low-voltage joule heating

Ming Zhou et al.

Summary: This study proposes an in situ asymmetric modification strategy to construct a highly conductive and multifunctional composite. The composite exhibits high electric conductivity and shielding effectiveness, as well as excellent joule-heating performance and thermal durability. Moreover, the unique structure provides hydrophobic and superhydrophilic properties, making it suitable for manufacturing comfortable wearable devices. Additionally, the composite shows potential as a sensor for human motion monitoring.

COMPOSITES PART B-ENGINEERING (2022)

Article Multidisciplinary Sciences

Fabrication of triboelectric polymer films via repeated rheological forging for ultrahigh surface charge density

Zhaoqi Liu et al.

Summary: This study proposes a processing method based on the repeated rheological forging of triboelectric polymers to achieve enhanced triboelectricity and investigates its mechanism. The method effectively regulates the composition of surface functional groups and the crystallinity of the polymer, leading to improved triboelectric performance. The findings provide guidance for the further development of triboelectric polymers.

NATURE COMMUNICATIONS (2022)

Article Engineering, Environmental

A hydrophobic conductive strip with outstanding one-dimensional stretchability for wearable heater and strain sensor

Bo Wang et al.

Summary: PFNS, a textile-based conductive polymer composite, exhibits low resistance and high electrothermal temperature due to the in-situ modification and polymerization of Fe3+ and pyrrole. It shows excellent one-dimensional stretchability, fast response and recovery time, good sensitivity, and long-term sensing function, making it promising for monitoring joint movements.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Low-Voltage Electrical Heater Based on One-Step Fabrication of Conductive Cu Nanowire Networks for Application in Wearable Devices

Zhiguang Guo et al.

Summary: This study introduces a flexible, low driving voltage, heat-resistant, and rapid-response Cu nanowire networks/clean nylon woven fabric wearable electrical heater, with highly conductive and uniform features that can quickly heat up in a short time. In addition, through methods such as finite element analysis, it lays the foundation for improving the performance and energy saving of personal thermal management textiles based on Joule heating.

ADVANCED MATERIALS INTERFACES (2021)

Article Materials Science, Multidisciplinary

Quick Thermal Response-Transparent-Wearable Heater Based on Copper Mesh/Poly(Vinyl Alcohol) Film

Han-Jung Kim et al.

Summary: Developed a high-performance, transparent, wearable heater with fast thermal response by transfer printing highly conductive and transparent copper mesh films onto flexible PVA substrates. The thermal response time of the heater is directly related to the thickness of the PVA substrate, and the optimized heater shows fast Joule heating effect with low input voltage.

ADVANCED ENGINEERING MATERIALS (2021)

Article Chemistry, Physical

Smart MXene-Based Janus films with multi-responsive actuation capability and high electromagnetic interference shielding performances

Lulu Li et al.

Summary: Flexible, multi-responsive, and electrically conductive graphene oxide (GO)/MXene Janus film is fabricated with strong obscure interfaces, achieving multiple stimuli responses (humidity, light, and electricity) and high electromagnetic interference (EMI) shielding performances. The film offers an attractive EMI shielding effectiveness of 40 dB at a small thickness of 1.5 mu m, and can be used for smart EMI shielding curtain and stimuli-responsive EMI shielding system.

CARBON (2021)

Article Chemistry, Multidisciplinary

Elastic Janus film for Wound Dressings: Unidirectional Biofluid Transport and Effectively Promoting Wound Healing

Bing Xu et al.

Summary: The traditional dressings' hydrophilicity cannot effectively manage excessive biofluid, hindering wound healing, and current dressings also have problems with limited stretching capability. This study presents a Janus wound dressing with the function of unidirectional biofluid draining, accelerating wound healing. Additionally, amoxicillin powder is encapsulated on the surface of the dressing to prevent bacterial infection.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Materials Science, Multidisciplinary

Flexible Janus Electrospun Nanofiber Films for Wearable Triboelectric Nanogenerator

Zhen Qin et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Article Chemistry, Physical

Electrical Tunable PVDF/Graphene Membrane for Controlled Molecule Separation

Wei-Song Hung et al.

CHEMISTRY OF MATERIALS (2020)

Article Materials Science, Multidisciplinary

Screen-Printed, Low-Cost, and Patterned Flexible Heater Based on Ag Fractal Dendrites for Human Wearable Application

Pan Zeng et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Article Materials Science, Composites

Largely enhanced dielectric and thermal conductive properties of novel ternary composites with small amount of nanofillers

Weiyan Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Review Materials Science, Multidisciplinary

Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications

Zengqian Liu et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Article Nanoscience & Nanotechnology

Weft-Knitted Fabric for a Highly Stretchable and Low-Voltage Wearable Heater

Mingchao Zhang et al.

ADVANCED ELECTRONIC MATERIALS (2017)

Article Chemistry, Multidisciplinary

Lightweight and Anisotropic Porous MWCNT/WPU Composites for Ultrahigh Performance Electromagnetic Interference Shielding

Zhihui Zeng et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Nanoscience & Nanotechnology

Compressible Graphene-Coated Polymer Foams with Ultralow Density for Adjustable Electromagnetic Interference (EMI) Shielding

Bin Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

In Situ Generated Janus Fabrics for the Rapid and Efficient Separation of Oil from Oil-in-Water Emulsions

Zijie Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Review Chemistry, Multidisciplinary

Janus Membranes: Exploring Duality for Advanced Separation

Hao-Cheng Yang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Nanoscience & Nanotechnology

Selective, Spontaneous One-Way Oil-Transport Fabrics and Their Novel Use for Gauging Liquid Surface Tension

Hongxia Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Nanoscience & Nanotechnology

Janus Polymer/Carbon Nanotube Hybrid Membranes for Oil/Water Separation

Jincui Gu et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Multidisciplinary

Droplet and Fluid Gating by Biomimetic Janus Membranes

Xuelin Tian et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Nanoscience & Nanotechnology

Lightweight, Multifunctional Polyetherimide/Graphene@Fe3O4 Composite Foams for Shielding of Electromagnetic Pollution

Bin Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Article Nanoscience & Nanotechnology

Facile Preparation of Lightweight Microcellular Polyetherimide/Graphene Composite Foams for Electromagnetic Interference Shielding

Jianqiang Ling et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Article Chemistry, Physical

Efficient electromagnetic interference shielding of lightweight graphene/polystyrene composite

Ding-Xiang Yan et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Article Nanoscience & Nanotechnology

Tough Graphene-Polymer Microcellular Foams for Electromagnetic Interference Shielding

Hao-Bin Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2011)