☆ 4.7 Article

High-concentration lignin biocomposites with low-melting point biopolyamide

CHEMICAL ENGINEERING JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Agricultural Engineering

Synthesis of Bio-based monomers and polymers using microbes for a sustainable bioeconomy

Sourbh Thakur et al.

Summary: Renewable biomass-based chemical extraction has gained attention due to environmental concerns and depletion of biomass assets. Bio-based chemicals provide opportunities for sustainable development of non-toxic, biodegradable, and biocompatible products, particularly in biomedical applications. Researchers are focused on developing innovative technologies with social benefits utilizing renewable feedstock bio-resources through microbial fermentation.

BIORESOURCE TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Composites

Melt-processed poly (L-lactic acid)/cellulose nanocrystals biocomposites for 3D printing: Improved melt processibility and inter-fuse adhesion

Xiao Wu et al.

Summary: This study successfully achieved the homogeneous dispersion of CNCs in PLLA by using PVAc modified CNCs, which improved the material's melt processibility and adhesion properties, resulting in significantly enhanced mechanical performance and dimensional stability.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Polymer Science

Hydrophobic lignin/polyurethane composite foam: An eco-friendly and easily reusable oil sorbent

Uiseok Hwang et al.

Summary: A novel oil sorbent composed of polyurethane foam incorporated with hydrophobized lignin particles has been developed, showing high absorption capacity and recyclability. The composite foam has great potential as a promising solution for the cleanup of organic contaminants.

EUROPEAN POLYMER JOURNAL (2022)

添加到收藏夹

Article Agricultural Engineering

Lignin-containing cellulose fibrils as reinforcement of plasticized PLA biocomposites produced by melt processing using PEG as a carrier

Belgacem Chihaoui et al.

Summary: This study demonstrates the feasibility of incorporating lignocellulosic nanofibers from date palm waste into PLA/PEG matrix to enhance mechanical properties. The mechanical performance was significantly improved, with a 250% increase in tensile strength and 1100% increase in Young's modulus at 8% LCNFs content. The use of PEG as a carrier was effective in dispersing LCNFs within the matrix and contributing to the disintegration of PLA in composting conditions.

INDUSTRIAL CROPS AND PRODUCTS (2022)

添加到收藏夹

Article Polymer Science

Using XPS and FTIR spectroscopies to investigate polyamide 11 degradation on aging flexible risers

Frederico G. de A. Dias et al.

Summary: Polyamide 11 is a commonly used thermoplastic material for fabricating the pressure sheath of flexible lines in offshore oil exploration. Analysis of two samples revealed that during operation, hydrolysis, methanolysis, and transesterifications occur due to the presence of alcohols in the riser.

POLYMER DEGRADATION AND STABILITY (2022)

添加到收藏夹

Article Chemistry, Applied

Modification of cellulose from sugarcane (Saccharum officinarum) bagasse pulp by cold plasma: Dissolution, structure and surface chemistry analysis

Hong Zhu et al.

Summary: In this study, cellulose from sugarcane bagasse pulp was modified using an innovative cold plasma technology. The results showed that the dissolution rate of cellulose was improved, and the surface exhibited roughness, holes, and breakage after the modification. The crystallinity index decreased, while the hydrogen bonding force weakened and the peak intensity of C=O and C=O stretching vibration groups increased.

FOOD CHEMISTRY (2022)

添加到收藏夹

Article Mechanics

Mechanical modeling and testing of different polyamides considering molecular chain structure, crystallinity, and large strains

Toyoshi Yoshida et al.

Summary: This study evaluated the effects of amide group density and crystallinity on the mechanical properties of polyamide (PA) and proposed a time-dependent nonlinear mechanical model based on the unfixed molecular chain network model to predict the mechanical behavior of PA.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2022)

添加到收藏夹

Article Polymer Science

Thermal induced crystalline transition of bio-based polyamide 56

Hongliang Kang et al.

Summary: The study reveals the Brill transition behavior of PA56 under thermal induction, which is related to the change in hydrogen bond strength. FTIR results show that during the Brill transition, the deformation, twisting, and rocking vibrations of CH2 groups are enhanced.

POLYMER (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Novel long-chain aliphatic polyamide/surface-modified silicon dioxide nanocomposites: in-situ polymerization and properties

H. Baniasadi et al.

Summary: A new kind of long-chain aliphatic polyamide (PA1218) was successfully developed through polycondensation and improved using modified silicon dioxide (SSD); FT-IR and TGA confirmed successful nanoparticle surface modification, leading to significantly enhanced mechanical properties in the nanocomposites; All samples demonstrated a water uptake capacity of less than 0.6%, making them suitable for specific engineering applications.

MATERIALS TODAY CHEMISTRY (2021)

添加到收藏夹

Article Polymer Science

Super-tough sustainable biobased composites from polylactide bioplastic and lignin for bio-elastomer application

Mohamed A. Abdelwahab et al.

Summary: A sustainable multifunctional biobased composite with superior toughness was engineered using PLA and OL, demonstrating a new strategy for producing high performance PLA materials. The composites displayed increased elongation at break and notched impact strength, indicating improved toughness while maintaining lower tensile strength and modulus.

POLYMER (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Exfoliated clay nanocomposites of renewable long-chain aliphatic polyamide through in-situ polymerization

Hossein Baniasadi et al.

Summary: The study aimed to synthesize renewable polyamide 614/organoclay nanocomposites with improved structural, mechanical, and thermal properties through in-situ polymerization. The results showed enhanced dispersion and exfoliation of clay in the matrix, leading to improved mechanical and thermal properties in the nanocomposites. This study supported the benefits of using in-situ polymerization for engineering applications.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Agricultural Engineering

Hydrophobic modification of lignin for rubber composites

Rohan Shorey et al.

Summary: Lignin, as the second most abundant natural biopolymer, has drawn significant interest for material applications, however, its hydrophilicity and poor dispersibility have limited its wide scale application. The novel silylation reaction was successfully employed to enhance the hydrophobicity of kraft lignin, demonstrating improvements in wettability and dispersibility in natural rubber composites. The incorporation of modified lignin showed enhanced mechanical properties in composites, highlighting its potential as a valuable additive.

INDUSTRIAL CROPS AND PRODUCTS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Biodegradable and renewable UV-shielding polylactide composites containing hierarchical structured POSS functionalized lignin

Xianwu Cao et al.

Summary: This study functionalized biobased lignin with POSS to prepare PLA composite films with superior UV-shielding performance and transparency, providing a new pathway for the preparation of biodegradable and renewable UV-shielding materials.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

New lignin-based hybrid materials as functional additives for polymer biocomposites: From design to application

Patryk Jedrzejczak et al.

Summary: In this study, ZrO2/lignin and ZrO2-SiO2/lignin hybrid materials were obtained for the first time using mechanical grinding method. The properties and efficiency of the lignin-based hybrids were determined using various research techniques, and their potential applications in construction industry were confirmed through thorough characterization.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Biocomposites from biobased polyamide 4,10 and waste corn cob based biocarbon

Ethan Watt et al.

Summary: Utilizing corn cob BioC as filler can enhance the environmental impact of polyamide 4,10 while increasing its biocontent. Pyrolyzing the filler at 350°C can create strong interfacial adhesion with PA 4,10, leading to improved performance of the composites.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

The toughening mechanism of core-shell particles by the interface interaction and crystalline transition in polyamide 1012

Chenxu Zhou et al.

Summary: It was found in the study that MBS particles improve interface and stress transfer with PA1012 through physical entanglement and chemical crosslinking, enhancing toughness of the material. MBS particles weaken the loading stress of matrix as stress concentration points and are conducive to crystallization for maintaining strength and transforming to a more tough gamma-form from alpha-form. The synergistic effects between MBS and PA1012 demonstrate significantly increased toughness while maintaining original strength.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

On mechanism of lignin decomposition - Investigation using microscale techniques: Py-GC-MS, Py-FT-IR and TGA

Mariusz Wadrzyk et al.

Summary: This study focuses on investigating the effect of reaction conditions, particularly the reaction atmosphere type, on the composition of volatiles generated during the pyrolysis of lignin. It was found that processing temperature has a significant impact on the composition changes of volatiles, while the pyrolysis atmosphere has minor qualitative effects but noticeable quantitative differences in their concentration. The complex molecular structure of lignin was confirmed through the identification of phenol derivatives, aliphatic oxygen compounds, and aromatic hydrocarbons as primary and secondary products of lignin decomposition.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effect of compatibilizers on lignin/bio-polyamide blend carbon precursor filament properties and their potential for thermostabilisation and carbonisation

R. Muthuraj et al.

Summary: Reactive compatibilization using MA and GMA can enhance the compatibility between TcC and PA1010, with MA being more effective but leading to slightly inferior properties of the carbon fibers. Accurate control of stress during thermostabilization and carbonization stages is crucial for optimizing the properties of the compatibilized carbon fibers.

POLYMER TESTING (2021)

添加到收藏夹

Article Polymer Science

Preparation of Chemically Modified Lignin-Reinforced PLA Biocomposites and Their 3D Printing Performance

Seo-Hwa Hong et al.

Summary: By conducting a simple esterification reaction, pristine lignin was converted to a new lignin modified with a terminal carboxyl group. Incorporating the COOH-lignin into PLA biocomposites can reduce the cost of printing PLA 3D filaments without altering their thermal and mechanical properties.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Selective Laser Sintering of Lignin-Based Composites

Rubina Ajdary et al.

Summary: In the study, lignin was introduced as a suitable component for selective laser sintering (SLS) of polyamide (PA12) to reduce costs while maintaining or improving processability and performance. The addition of lignin in SLS resulted in composite material with improved thermal stability and mechanical properties, while also influencing the surface properties and wettability of the structures. The research demonstrated the potential of lignin valorization in composites through SLS, allowing for reduced cost, scalability, and easy processing.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

A Review on the Lignin Biopolymer and Its Integration in the Elaboration of Sustainable Materials

Francisco Vasquez-Garay et al.

Summary: Lignin, a major component in wood and plant cell walls, is attracting increasing interest in the chemical industry as a renewable resource. Its complex structure and diversity pose challenges in integration into mixtures. Various chemical processes can be used to recover lignin, which plays a crucial role in the synthesis of sustainable materials.

SUSTAINABILITY (2021)

添加到收藏夹

Review Biochemistry & Molecular Biology

Renewable Polyurethanes from Sustainable Biological Precursors

Thien An Phung Hai et al.

Summary: The scientific community is actively searching for renewable alternatives to petroleum-based products, with a focus on utilizing resources like vegetable oils, algae oils, and polysaccharides to develop sustainable materials with improved carbon footprints. Incorporating renewable content into polymer materials, especially polyurethanes, shows increasing and realistic potential for reducing environmental impacts.

BIOMACROMOLECULES (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Synthesis, characterization and aging tests of functional rigid polymeric biocomposites with kraft lignin

Lukasz Klapiszewski et al.

Summary: This study focused on the synthesis of biocomposites with kraft lignin, their physicochemical properties, and resistance to environmental factors such as UV irradiation and water. The addition of lignin was found to have a significant impact on the properties of the composite materials, especially in terms of their resistance to environmental factors.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Effects of sacrificial coordination bonds on the mechanical performance of lignin-based thermoplastic elastomer composites

Jinhao Huang et al.

Summary: In this study, coordination-based energy sacrificial bonds were constructed between lignin and polyolefin elastomer to prepare high performance lignin-based thermoplastic elastomers. The strength and toughness of lignin-based TPEs can be adjusted by choosing different nitrogen heterocyclic compounds as reactive assistants and Fe3+ or Zr2+ as metal coordination centers, providing a method for making green bio-composites with good strength and toughness.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

添加到收藏夹

Article Chemistry, Applied

Cellulosic nanofibers filled poly(β-hydroxybutyrate): Relations between viscoelasticity of composites and aspect ratios of nanofibers

Wenting Zhang et al.

Summary: By using nanocelluloses with different fiber aspect ratios, this study investigated the impact of dispersion states on the performance of polymer composites. The flexibility and morphology of fibrous nanocelluloses directly influenced the viscoelastic and elastoplastic behaviors of the composites.

CARBOHYDRATE POLYMERS (2021)

添加到收藏夹

Article Chemistry, Analytical

Interactions of lignin and LDPE during catalytic co-pyrolysis: Thermal behavior and kinetics study by TG-FTIR

Liangliang Tao et al.

Summary: The study found that lignin and hydrogen-rich LDPE have a synergistic effect in catalytic co-pyrolysis, which can lower the pyrolysis starting temperature and accelerate the pyrolysis rate. HZSM-5 catalysis significantly reduces the activation energy of the reaction, shifting the composition of pyrolysis products towards alkanes and aromatics.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-Performance and Biobased Polyamide/Functionalized Graphene Oxide Nanocomposites through In Situ Polymerization for Engineering Applications

Hossein Baniasadi et al.

Summary: In this study, biobased polyamide/functionalized graphene oxide (PA-FGO) nanocomposite was developed using renewable resources. By improving the compatibility between GO and biobased PA and enhancing interfacial interactions, significant improvements were achieved in the mechanical properties and conductivity of the materials.

MACROMOLECULAR MATERIALS AND ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rheology of PLA/regenerated cellulose nanocomposites prepared by the pickering emulsion process: Network formation and modeling

Lu Cui et al.

Summary: PLA/regenerated cellulose (RC) nanocomposites with varying cellulose content were prepared using the Pickering emulsion process, demonstrating RC as a suitable reinforcement for PLA with good dispersion and network structure formation. Model analysis aided in quantitative analysis of experimental results, offering additional insights into the structure and properties of the composites.

MATERIALS & DESIGN (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A current advancement on the role of lignin as sustainable reinforcement material in biopolymeric blends

Mariana Mariana et al.

Summary: This paper comprehensively examines the use of lignin as a reinforcement material to enhance the properties of biopolymers-based materials. It reviews the role of lignin in various industrial applications and highlights its potential applications in biofuel, hydrocarbon, lubricant, renewable chemical, and smart materials.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Chemistry, Physical

Moisture management of polypropylene non-woven fabric using microcrystalline cellulose through surface modification

Vikrant G. Gorade et al.

Summary: This paper introduces a new method to improve the liquid moisture management properties of polypropylene non-woven fabric by grafting microcrystalline cellulose onto the fabric. The modified samples showed enhanced liquid moisture management properties and other textile characteristics, with the exception of tearing strength. The study suggests that the modified substrate can expand the application scope of sports textiles.

APPLIED SURFACE SCIENCE ADVANCES (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Moving towards the era of bio fibre based polymer composites

Partha Pratim Das et al.

Summary: Pollution from plastic waste is a major concern for the eco-friendly environment, but bio fiber based polymer composites are emerging as a suitable replacement due to their low cost, lightweight, and eco-friendly properties, potentially leading to a sustainable environment in the future.

CLEANER ENGINEERING AND TECHNOLOGY (2021)

添加到收藏夹

Article Polymer Science

Synthesis of polyampholytic diblock copolymers via RAFT aqueous solution polymerization

S. M. North et al.

Summary: In this study, two new classes of polyampholytic diblock copolymers were synthesized using RAFT aqueous solution polymerization, characterized through various experiments and derivatization methods. The aqueous solution properties of these polyampholytic diblock copolymers were investigated using techniques like dynamic light scattering and aqueous electrophoresis, revealing their isoelectric points.

POLYMER CHEMISTRY (2021)

添加到收藏夹

Review Polymer Science

Modern biopolyamide-based materials: synthesis and modification

Paulina Radzik et al.

POLYMER BULLETIN (2020)

添加到收藏夹

Article Materials Science, Composites

Thermo-mechanical properties and creep modelling of wine lees filled Polyamide 11 (PA11) and Polybutylene succinate (PBS) bio-composites

A. Nanni et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Review Polymer Science

Sustainable polymers from biomass: Bridging chemistry with materials and processing

Zhongkai Wang et al.

PROGRESS IN POLYMER SCIENCE (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

High-performance glass-fibre reinforced biobased aromatic polyamide in automotive biofuel supply systems

Xin-Feng Wei et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Review Biochemistry & Molecular Biology

Polymers and Composites Derived from Castor Oil as Sustainable Materials and Degradable Biomaterials: Current Status and Emerging Trends

Indranil Chakraborty et al.

BIOMACROMOLECULES (2020)

添加到收藏夹

Article Food Science & Technology

Surface modification of cellulose nanofiber film with fatty acids for developing renewable hydrophobic food packaging

SuriyaPrakaash Lakshmi Balasubramaniam et al.

FOOD PACKAGING AND SHELF LIFE (2020)

添加到收藏夹

Article Energy & Fuels

Utilization of lignin: A sustainable and eco-friendly approach

Adarsh Kumar et al.

JOURNAL OF THE ENERGY INSTITUTE (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Biopolymer blends from hardwood lignin and bio-polyamides: Compatibility and miscibility

R. Muthuraj et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Materials Science, Characterization & Testing

High-performance fully bio-based poly(lactic acid)/ polyamide11 (PLA/PA11) blends by reactive blending with multi-functionalized epoxy

Xiaolei Yu et al.

POLYMER TESTING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Developing high performance PA 11/cellulose nanocomposites for industrial-scale melt processing

Priya Venkatraman et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Characterization & Testing

Structure-property relationship in fully biobased epoxidized soybean oil thermosets cured by dicarboxyl terminated polyamide 1010 oligomer with different carboxyl/epoxy ratios

Xiang-Zhao Wang et al.

POLYMER TESTING (2019)

添加到收藏夹

Article Polymer Science

Valorization of Industrial Lignin as Biobased Carbon Source in Fire Retardant System for Polyamide 11 Blends

Neeraj Mandlekar et al.

POLYMERS (2019)

添加到收藏夹

Article Polymer Science

Fire retardant action of zinc phosphinate and polyamide 11 blend containing lignin as a carbon source

Neeraj Mandlekar et al.

POLYMER DEGRADATION AND STABILITY (2018)

添加到收藏夹

Article Polymer Science

Redefining polyamide property profiles via renewable long-chain aliphatic segments: Towards impact resistance and low water absorption

Phan Huy Nguyen et al.

EUROPEAN POLYMER JOURNAL (2018)

添加到收藏夹

Article Engineering, Environmental

Fully Bio-Sourced Nylon 11/Raw Lignin Composites: Thermal and Mechanical Performances

N. Sallem-Idrissi et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)

添加到收藏夹

Article Polymer Science

Renewable polyamides via thiol-ene 'click' chemistry and long-chain aliphatic segments

Phan Huy Nguyen et al.

POLYMER (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Competitive Interactions in Aromatic Polymer/lignosulfonate Blends

Gabor Szabo et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

添加到收藏夹

Article Polymer Science

Mechanical, rheological and degradation properties of PBAT nanocomposites reinforced by functionalized cellulose nanocrystals

I. F. Pinheiro et al.

EUROPEAN POLYMER JOURNAL (2017)

添加到收藏夹

Article Polymer Science

High-density green polyethylene biocomposite reinforced with cellulose fibers and using lignin as antioxidant

Augusto Guilhen et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

添加到收藏夹

Article Polymer Science

Surface modification of lignin for applications in polypropylene blends

Siham Atifi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

添加到收藏夹

Article Polymer Science

Random Copolymers from Polyamide 11 and Polyamide 12 by Reactive Extrusion: Synthesis, Eutectic Phase Behavior, and Polymorphism

Lien Telen et al.

MACROMOLECULES (2016)

添加到收藏夹

Article Polymer Science

On the deformation induced order-disorder transitions in the crystalline phase of polyamide 6

V. Miri et al.

EUROPEAN POLYMER JOURNAL (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

New Process of Chemical Grafting of Cellulose Nanoparticles with a Long Chain Isocyanate

Gilberto Siqueira et al.

LANGMUIR (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.