☆ 4.7 Article

Quasi-metallic lithium encapsulated in the subnanopores of hard carbon for hybrid lithium-ion/lithium metal batteries

CHEMICAL ENGINEERING JOURNAL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Cotton pad derived 3D lithiophilic carbon host for robust Li metal anode: In-situ generated ionic conductive Li3N protective decoration

Chengyi Lu et al.

Summary: This study presents a newly designed Li composite anode with enhanced lithium affinity and in-situ Li3N decoration to address the challenges in Li metal batteries, including dendritic growth, volume change, and short lifespan. The composite anode shows improved kinetics of Li transport and redox, inhibited dendritic generation, and stable cycling performance for 1400 hours. The full cells using this anode exhibited impressive long-term cyclic stability up to 400 cycles at different current rates.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Successive Conversion-Deintercalation Delithiation Mechanism for Practical Composite Lithium Anodes

Peng Shi et al.

Summary: This study proposes a successive conversion-deintercalation (CTD) delithiation mechanism to restrain the generation of dead Li by manipulating the overpotential of the anode. The working batteries based on this mechanism show improved cycling performance and capacity retention under practical conditions.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Self-assembled monolayers direct a LiF-rich interphase toward long-life lithium metal batteries

Yujing Liu et al.

Summary: In this study, self-assembled monolayers (SAMs) were utilized to control electrolyte degradation and solid-electrolyte interphase (SEI) formation in lithium metal batteries (LMBs), resulting in improved cycling performance and lifespan.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Dendrite-Free Lithium-Metal Anode Enabled by Designed Ultrathin MgF2 Nanosheets Encapsulated Inside Nitrogen-Doped Graphene-Like Hollow Nanospheres

Shang-Qi Li et al.

Summary: In this study, a composite material consisting of ultrathin MgF2 nanosheets encapsulated in hollow nanospheres was used to address the issues of lithium dendrite growth and volume change. The study explored the deposition behavior and mechanism of lithium in the composite material and achieved good cycling stability and reversible capacity.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

A lightweight localized high-concentration ether electrolyte for high-voltage Li-Ion and Li-metal batteries

Xudong Peng et al.

Summary: The emerging localized high-concentration electrolytes (LHCEs) with small salt dosage, low viscosity, and favorable electrode wettability have triggered extensive research interest recently. In this study, an anode-compatible and high-voltage ether-based LHCE (BTF-LHCE) is proposed by introducing cost-efficient and lightweight benzotrifluoride (BTF) as a diluent. The BTF-LHCE system exhibits unique solvation structure and interfacial chemistry, leading to high Coulombic efficiency (CE) for both Si and metallic Li anodes. The Si||NCM622 and Li||NCM622 pouch cell assembled with BTF-LHCE show high cell-level specific energy densities, indicating the promising potential of the advanced ether-based electrolytes for high-voltage and high-specific-energy battery technologies.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thermally Conductive AlN-Network Shield for Separators to Achieve Dendrite-Free Plating and Fast Li-Ion Transport toward Durable and High-Rate Lithium-Metal Anodes

Yue Guo et al.

Summary: A facile construction of a porous and robust network with thermally conductive AlN nanowires onto a commercial polypropylene separator effectively solves the dendrite growth issue in lithium-metal anodes and achieves unprecedented performance.

ADVANCED SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Designing and Demystifying the Lithium Metal Interface toward Highly Reversible Batteries

Rui Xu et al.

Summary: By regulating the strong Li+-anion coordination structures and nucleation modulation procedure in a low-polarity solvent, high-efficiency Li plating/stripping can be achieved, improving cycling efficiency and minimizing solid electrolyte interface generation. The study shows potential for building high-energy-density Li metal batteries through these targeted interfacial designs.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nitrogen-Doped Amorphous Zn-Carbon Multichannel Fibers for Stable Lithium Metal Anodes

Yongjin Fang et al.

Summary: The use of nitrogen-doped amorphous Zn-carbon multichannel fibers as hosts for lithium accommodation, with lithiophilic nitrogen-doped carbon and functional Zn nanoparticles for preferred deposition sites, reduces local current density, guides uniform lithium deposition, and improves battery efficiency and stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Copper-coordinated cellulose ion conductors for solid-state batteries

Chunpeng Yang et al.

Summary: By coordinating copper ions with cellulose nanofibrils, this study has developed a high-performance solid polymer ion conductor with molecular channels that enable rapid lithium ion transport, showing promise for safe, high-performance solid-state batteries. This molecular-channel engineering approach shows high lithium ion conductivity, high transference number, and wide electrochemical stability, with implications for applications beyond batteries.

NATURE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lotus-Root-Like Carbon Fibers Embedded with Ni-Co Nanoparticles for Dendrite-Free Lithium Metal Anodes

Chen Chen et al.

Summary: This study proposed a spatial control strategy using lotus-root-like Ni-Co hollow prisms@carbon fibers as the host to address the challenges of lithium dendrites growth and huge volume change for practical applications of Li-metal anodes. The homogeneous distribution of bimetallic Ni-Co particles and the 3D conductive network effectively reduced the overpotential for Li nucleation and guided uniform Li nucleation and non-dendritic growth. As a result, the NCH@CFs host enabled a stable Li metal anode with low voltage hysteresis during repeated Li plating/stripping.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Boundary of Lithium Plating in Graphite Electrode for Safe Lithium-Ion Batteries

Wenlong Cai et al.

Summary: The study shows that by defining the endurable amount of uniform Li plating in graphite anode in safe lithium-ion batteries, the presence of dead Li can be eliminated, the average Coulombic efficiency for deposited Li can be improved, leading to high capacity retention and providing new insights for improving the fast-charging capability, low-temperature performance, and energy density of practical lithium-ion batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Physical

Systematic Evaluation of Carbon Hosts for High-Energy Rechargeable Lithium-Metal Batteries

Yao Liu et al.

Summary: Rechargeable lithium-metal batteries hold significant potential for high energy and low cost, but the stability of lithium anodes remains a major challenge. The interaction between the electrolyte and carbon materials plays a crucial role in determining the performance of these batteries. Compatible electrolytes are essential for achieving high-efficiency deposition and good cycle life in experimental conditions.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Template-Sacrificed Hot Fusion Construction and Nanoseed Modification of 3D Porous Copper Nanoscaffold Host for Stable-Cycling Lithium Metal Anodes

Huinan Lin et al.

Summary: A new method for constructing Au/Cu nanoscaffold as an effective Li metal hosting material to solve the dendrite growth and unstable interface issues during Li plating/stripping process is proposed in this work. The symmetric cells based on this nanoscaffold exhibit stable performance, demonstrating great potential for high-performance lithium metal batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithium-Metal Anodes Working at 60 mA cm-2 and 60 mAh cm-2 through Nanoscale Lithium-Ion Adsorbing

Lei Ye et al.

Summary: By using graphene quantum dots as a protective layer, the issue of Li-ion depletion caused by high-rate Li deposition has been successfully resolved, allowing for long-term reversible Li plating/stripping and improving battery performance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Physical

SiOx embedded in N-doped carbon nanoslices: A scalable synthesis of high-performance anode material for lithium-ion batteries

Kaiyuan Zhang et al.

Summary: A facile and scalable synthesis method of SiOx/NCS supported by exfoliated N-doped carbon nanoslices has been developed, significantly improving the cycling performance and rate capability of lithium-ion batteries. The potential application of SiOx/NCS anode in LIBs is confirmed by the good performance of SiOx/NCS//NCM111 full cells.

CARBON (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Sub-nanometer confinement enables facile condensation of gas electrolyte for low-temperature batteries

Guorui Cai et al.

Summary: Confining molecules in nanoscale environments can change their properties, opening up possibilities for new applications. By capillary condensation of gas electrolytes in MOF pores, lithium/fluorinated graphite batteries with significantly higher capacity can be achieved.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Inhibition of Lithium Dendrite Formation in Lithium Metal Batteries via Regulated Cation Transport through Ultrathin Sub-Nanometer Porous Carbon Nanomembranes

Sathish Rajendran et al.

Summary: This study demonstrates the use of ultrathin carbon nanomembrane as an interlayer to regulate Li-ion transport and suppress dendrite growth in lithium metal batteries. Analysis on symmetrical cells and Li plating on Cu foil reveals highly dense deposits of Li metal. The experimental results suggest that this approach can improve the cycling performance, stability, and voltage characteristics of the battery.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Functional polymers in electrolyte optimization and interphase design for lithium metal anodes

Caihong Zhang et al.

Summary: Functional polymers play a crucial role in addressing issues related to lithium metal anodes, particularly in reducing dendrite growth, establishing stable interfaces, and accommodating volume changes. The focus is on exploring interfacial chemistry and Li+ ion transport mechanisms.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Multidisciplinary Sciences

A highly stable lithium metal anode enabled by Ag nanoparticle-embedded nitrogen-doped carbon macroporous fibers

Yongjin Fang et al.

Summary: In this study, a three-dimensional hybrid host was developed to inhibit dendritic lithium formation in lithium batteries, resulting in a more stable lithium plating/stripping behavior. When coupled with a commercial cathode, the assembled full cell showed high rate capability and stable cycling life.

SCIENCE ADVANCES (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Biomass-based materials for green lithium secondary batteries

Chengbin Jin et al.

Summary: The advances in process engineering, nanotechnology, and materials science have made it possible for biomass to be used in novel energy storage technologies like lithium secondary batteries (LSBs). Biomass-derived materials can be sustainable battery components, contributing to green battery systems. This review provides a comprehensive overview of the fabrication and application of biomass and biomass-derived materials in LSBs, emphasizing the potential for high-performance green battery systems.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Engineering, Environmental

Copper decorated ultralight 3D carbon skeleton derived from soybean oil for dendrite -free Li metal anode

Xin-Yang Yue et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

ZIF-Derived Cobalt-Containing N-Doped Carbon-Coated SiOx Nanoparticles for Superior Lithium Storage

Kaiyuan Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stable Lithium Deposition Enabled by an Acid-Treated g-C3N4 Interface Layer for a Lithium Metal Anode

Xiaoyu Luan et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electrical Conductivity Gradient Based on Heterofibrous Scaffolds for Stable Lithium-Metal Batteries

Sang-Ho Hong et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Double-Shelled C@MoS2Structures Preloaded with Sulfur: An Additive Reservoir for Stable Lithium Metal Anodes

Huadong Yuan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Editorial Material Materials Science, Multidisciplinary

Realizing high performance of solid-state lithium metal batteries by flexible ceramic/polymer hybrid solid electrolyte

Cheng-Lin Yan

RARE METALS (2020)

添加到收藏夹

Article Chemistry, Physical

Cycling Lithium Metal on Graphite to Form Hybrid Lithium-Ion/Lithium Metal Cells

Cameron Martin et al.

JOULE (2020)

添加到收藏夹

Article Chemistry, Physical

Natural Polyphenol Tannic Acid as an Efficient Electrolyte Additive for High Performance Lithium Metal Anode

Qin Ran et al.

ACTA PHYSICO-CHIMICA SINICA (2020)

添加到收藏夹

Article Chemistry, Physical

Lithiophilic 3D Porous CuZn Current Collector for Stable Lithium Metal Batteries

Duo Zhang et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Mechanisms for overcharging of carbon electrodes in lithium-ion/sodium-ion batteries analysed by operando solid-state NMR

Kazuma Gotoh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

Tortuosity Effects in Lithium-Metal Host Anodes

Hao Chen et al.

JOULE (2020)

添加到收藏夹

Article Chemistry, Physical

Rapid Lithium Diffusion in Order@Disorder Pathways for Fast-Charging Graphite Anodes

Wenlong Cai et al.

SMALL STRUCTURES (2020)

添加到收藏夹

Article Chemistry, Physical

Regulating Pore Structure of Hierarchical Porous Waste Cork-Derived Hard Carbon Anode for Enhanced Na Storage Performance

Yuqi Li et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Engineering, Environmental

Lithiated zinc oxide nanorod arrays on copper current collectors for robust Li metal anodes

Gang Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Flexible Solid Electrolyte Interphase Layer for Long-Life Lithium Metal Anodes

Nian-Wu Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

添加到收藏夹

Article Chemistry, Physical

Large-scale synthesis of high-quality lithium-graphite hybrid anodes for mass-controllable and cycling-stable lithium metal batteries

Sufu Liu et al.

ENERGY STORAGE MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Protected Lithium-Metal Anodes in Batteries: From Liquid to Solid

Chunpeng Yang et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Mechanisms for Lithium Nucleation and Dendrite Growth in Selected Carbon Allotropes

Xin Su et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes

Nian-Wu Li et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Graphite-Encapsulated Li-Metal Hybrid Anodes for High-Capacity Li Batteries

Yongming Sun et al.

CHEM (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes

Chun-Peng Yang et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Lithium metal anodes for rechargeable batteries

Wu Xu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

In situ 7Li nuclear magnetic resonance observation of the electrochemical intercalation of lithium in graphite: second cycle analysis

Frederic Chevalier et al.

CARBON (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

The first in situ 7Li NMR study of the reversible lithium insertion mechanism in disorganised carbons

M Letellier et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2004)

添加到收藏夹

Article Electrochemistry

In situ 7Li-nuclear magnetic resonance observation of reversible lithium insertion into disordered carbons

F Chevallier et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2003)

添加到收藏夹

Article Chemistry, Physical

7Li solid-state nuclear magnetic resonance as a probe of lithium species in microporous carbon anodes

SE Hayes et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2003)

添加到收藏夹

Article Chemistry, Physical

The first in situ 7Li nuclear magnetic resonance study of lithium insertion in hard-carbon anode materials for Li-ion batteries

M Letellier et al.

JOURNAL OF CHEMICAL PHYSICS (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.