4.7 Article

Hygrothermal aging behavior and mechanical properties of modified ramie fiber reinforced polyethylene terephthalate glycol composites

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Composites

A real micro-structural model to simulate the transversal compression behaviors of unidirectional composites based on the μ-CT detection

Tao Liu et al.

Summary: In this paper, a microstructural model of UD composite was built using μ-CT technique and image processing algorithm. The validity of the model was verified and the results showed that fiber accumulated array plays a key role in the mechanical properties, while resin bubble significantly affects the transversal compression behavior.

COMPOSITES COMMUNICATIONS (2022)

Article Green & Sustainable Science & Technology

Towards green composites: Bioepoxy composites reinforced with bamboo/basalt/carbon fabrics

Krittirash Yorseng et al.

Summary: This study focuses on replacing synthetic epoxy with bioepoxy resin and replacing synthetic-based composites with fully biobased composites. Hybrid composites of bioepoxy/bamboo/basalt/carbon were fabricated and tested with accelerated weathering. The results showed that these hybrid composites retained excellent mechanical properties, indicating their potential for automotive and structural applications.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Engineering, Environmental

Performance of Sisal/Hemp Bio-based Epoxy Composites Under Accelerated Weathering

K. Senthilkumar et al.

Summary: The study investigated the effect of accelerated weathering conditions on sisal and hemp fiber bio-composites. Results showed that the weathered hybrid mats exhibited good impact resistance and had nearly equivalent impact strength compared to pure sisal and hemp-based composites.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

Article Engineering, Manufacturing

Hygrothermal ageing behavior and mechanism of carbon nanofibers modified flax fiber-reinforced epoxy laminates

Yanlei Wang et al.

Summary: This study found that adding carbon nanofibers can significantly improve the water absorption, tensile, and thermodynamic properties of flax fiber-reinforced epoxy laminates under hygrothermal aging conditions.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Materials Science, Composites

Investigation of the effect of water absorption on thermomechanical and viscoelastic properties of flax-hemp-reinforced hybrid composite

Abir Saha et al.

Summary: The study investigates the effect of water absorption on the thermo-mechanical properties of flax-hemp-reinforced epoxy composites, showing that hybrid composites perform better in terms of water absorption and thermal conductivity, indicating potential benefits of using hybridization in composite materials.

POLYMER COMPOSITES (2021)

Article Metallurgy & Metallurgical Engineering

Effect of Resin on Mechanical and Wear Performance of Wire Mesh-Reinforced Hydrophilic Fiber Composite

C. Quberk Jeeva Singh et al.

Summary: This study investigated the performance of hybrid composites made of hemp and flax fibers reinforced with stainless steel wire mesh, showing that the composites with wire mesh had higher tensile and flexural strength, lower water absorption, and less wear compared to those without wire mesh.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2021)

Article Materials Science, Textiles

Effect of moisture absorption on the mechanical performance of natural fiber reinforced woven hybrid bio-composites

Vijay Chaudhary et al.

JOURNAL OF NATURAL FIBERS (2020)

Article Materials Science, Multidisciplinary

Investigation of Mechanical and Viscoelastic Properties of Flax- and Ramie-Reinforced Green Composites for Orthopedic Implants

Santosh Kumar et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Article Automation & Control Systems

Water absorption behaviour on the mechanical properties of woven hybrid reinforced polyester composites

Mohammad Hazim Mohamad Hamdan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Article Agricultural Engineering

Reinforcement of natural fiber yarns by cellulose nanomaterials: A multi scale study

Shokoofeh Ghasemi et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

Review Green & Sustainable Science & Technology

Characterization and properties of natural fiber polymer composites: A comprehensive review

M. R. Sanjay et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Engineering, Manufacturing

The effect of alkaline and silane treatments on mechanical properties and breakage of sisal fibers and poly(lactic acid)/sisal fiber composites

A. Orue et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Article Engineering, Manufacturing

Grafting of nano-TiO2 onto flax fibers and the enhancement of the mechanical properties of the flax fiber and flax fiber/epoxy composite

Hongguang Wang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Article Materials Science, Multidisciplinary

Improved mechanical properties of carbon nanotubes-coated flax fiber reinforced composites

Yan Li et al.

JOURNAL OF MATERIALS SCIENCE (2015)

Article Chemistry, Physical

Effect of silane treatment on microstructure of sisal fibers

Feng Zhou et al.

APPLIED SURFACE SCIENCE (2014)

Article Chemistry, Applied

Surface modification of cellulose using silane coupling agent

Manju Kumari Thakur et al.

CARBOHYDRATE POLYMERS (2014)

Review Engineering, Manufacturing

Critical review of recent publications on use of natural composites in infrastructure

David B. Dittenber et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

Article Materials Science, Textiles

Effects of Surface Treatment of Ramie Fibers in a Ramie/Poly(lactic acid) Composite

Hae Young Choi et al.

FIBERS AND POLYMERS (2012)

Article Materials Science, Composites

Study of moisture absorption in natural fiber plastic composites

W Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2006)