☆ 4.8 Article

Revealing the accelerated reaction kinetic of Ni-rich cathodes by activated carbons for high performance lithium-ion batteries

CARBON (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Polymer derived honeycomb-like carbon nanostructures for high capacitive supercapacitor application

Sushanta K. Das et al.

Summary: In this study, porous carbon nanostructures were designed and fabricated, and redox-active species were added to enhance the performance of supercapacitors. The results showed that the prepared material exhibited high specific capacitance and energy density. Furthermore, asymmetrical coin-cell devices were used to further improve the performance.

CARBON (2023)

添加到收藏夹

Review Chemistry, Physical

Strategies for improving electrochemical reaction kinetics of cathode materials for subzero-temperature Li-ion batteries: A review

Fanbo Meng et al.

Summary: This review summarizes recent important advances in improving the electrochemical reaction kinetics for subzero operations of lithium-ion batteries based on the cathode perspective. It discusses the influences of subzero temperatures on the electrochemical reaction kinetics for typical cathode materials and various strategies developed for enhancing the interfacial and internal electrochemical reaction kinetics under subzero temperatures.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low-Tortuosity Thick Electrodes with Active Materials Gradient Design for Enhanced Energy Storage

Jingyi Wu et al.

Summary: This study develops a low-tortuosity electrode with an active material gradient structure, which improves the energy density and rate capabilities of batteries. It provides insights into optimizing electrode microstructures for enhanced energy storage.

ACS NANO (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Lithium-Diffusion Induced Capacity Losses in Lithium-Based Batteries

David Rehnlund et al.

Summary: This review focuses on diffusion-controlled capacity losses in rechargeable lithium-based batteries due to concentration gradients, which have been largely unrecognized. Evidence for diffusion-controlled capacity losses is presented and discussed, along with approaches to identify and solve these problems. Future research directions in this important area are proposed.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Stress-Tolerant Printed Architectures Toward Stable Cycling ofUltrahigh-Loading Ni-Rich Layered Oxide Cathodes for WearableEnergy Storage Devices

Chengxin Peng et al.

Summary: In this study, a thick and robust Ni-rich LiNi0.8Co0.1Mn0.1O2 (NCM811) layered oxide cathode grid-structured electrode is developed using a three-dimensional (3D) direct ink writing (DIW) technique. This electrode demonstrates high energy density and fast charging for wearable energy storage devices.

ENERGY & FUELS (2022)

添加到收藏夹

Article Chemistry, Applied

Cellulose nanofiber separator for suppressing shuttle effect and Li dendrite formation in lithium-sulfur batteries

Jingxue Li et al.

Summary: In this study, a free-standing cellulose nanofiber (CNF) separator was designed and fabricated to address the issues of polysulfides shuttle and dendrite growth in Lithium-sulfur batteries (LSBs). The CNFs with abundant polar oxygen-containing functional groups were able to chemically immobilize the polysulfides and control the surface morphology of the SEI on lithium metal, thereby suppressing dendrite formation. The pore structure of the membrane was fine-tuned by adjusting the isopropanol content in the suspension to achieve optimal electrochemical performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of Oxygen Pressurization on Li+/Ni2+ Cation Mixing and the Oxygen Vacancies of LiNi0.8Co0.15Al0.05O2 Cathode Materials

Peng Xiao et al.

Summary: In this study, LiNi0.8Co0.15Al0.05O2 cathode material with a regular crystal structure was successfully prepared through oxygen pressurization. The combination of oxygen pressure and calcination temperature effectively improved the electrochemical performance of Ni-rich materials by reducing cation mixing and oxygen vacancies, as well as suppressing microcrack formation.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Physical

Unprecedented Superhigh-Rate and Ultrastable Anode for High-Power Battery via Cationic Disordering

Wei Wu et al.

Summary: This study reports the development of a novel titanium niobate anode material, pd-TNO, with boosted intercalation kinetics and stability at high charging/discharging rates. The pd-TNO anode enables ultrafast Li+ storage and exceptional cycling stability, delivering an outstanding specific capacity at high rates. Using pd-TNO, a high-power LIB with unprecedented power density is demonstrated, showing great potential for practical applications.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Engineering, Chemical

A novelty strategy induced pinning effect and defect structure in Ni-rich layered cathodes towards boosting its electrochemical performance

Zhouliang Tan et al.

Journal of Energy Chemistry (2022)

添加到收藏夹

Article Chemistry, Physical

Visualization of concentration polarization in thick electrodes

Yuntao Guo et al.

Summary: This study investigates the influence of concentration polarization on the crystal structure and chemical properties of active materials in thick electrodes. It verifies the existence of concentration polarization in the configuration of thin-electrode-stacking cells (Scells) for the first time and visualizes the gradient distribution of Li solid-phase content on the section of the thick electrodes using Time of Flight Secondary Ion Mass Spectrometry (TOF-SIMS). Additionally, it clarifies the mechanism of alleviating concentration polarization by constructing holes array on thick electrodes through electrochemical simulation.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inhibiting Solvent Co-Intercalation in a Graphite Anode by a Localized High-Concentration Electrolyte in Fast-Charging Batteries

Li-Li Jiang et al.

Summary: By utilizing a localized high-concentration electrolyte, a uniform and robust solid electrolyte interphase can be achieved on the graphite surface, leading to fast-charging performance and excellent cycling stability of lithium-ion batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Electrochemistry

Simulation study of rate limiting factors of Li-ion batteries using experimental functions of electronic and ionic resistances

Hiroki Kondo et al.

Summary: The study investigated the rate performance of Li-ion batteries using simulation models, providing battery design guidelines and considering rate-limiting factors. Results from parametric studies showed that battery designs with thin, low-porosity positive electrodes exhibited better performance under the same specific energy designs.

ELECTROCHIMICA ACTA (2021)

添加到收藏夹

Article Chemistry, Physical

Enhancing the structure stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via encapsulating in negative thermal expansion nanocrystalline shell

Kai Du et al.

Summary: In this study, a negative thermal expansion material (ZVO) was used as a coating layer to enhance the structure stability and electrochemical performance of Ni-rich cathode material LiNi0.6Co0.2Mn0.2 O2. The NCM622@1.0 wt % ZVO sample showed excellent cyclability and rate capability under high temperature cycling, indicating the potential of ZVO in improving the bulk structure stability and interface compatibility of modified NCM622.

NANO ENERGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comprehensive understanding of Li/Ni intermixing in layered transition metal oxides

Han-xin Wei et al.

Summary: With the development of high energy density battery technology, Ni-rich layered transition metal oxide cathode materials, particularly in Li-ion batteries, have attracted attention. However, the inevitable Li/Ni intermixing affects the material performance. This review comprehensively summarizes the reasons for Li/Ni intermixing and its impact on materials, and presents methods for regulating it.

MATERIALS TODAY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Improved electrochemical performances of LiNi0.5Co0.2Mn0.3O2 modified by Graphene/V2O5 co-coating

Ying Li et al.

Summary: The electrochemical performance of NCM523 has been successfully improved by the graphene/V2O5 co-coating, leading to enhanced capacity retention and rate performance. The improved performances are attributed to the co-coating effectively resisting HF attacks on NCM523 and simultaneously improving the electronic conductivity and lithium ion diffusion coefficient of the cathode material.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Physical

Polycrystalline and Single Crystalline NCM Cathode Materials-Quantifying Particle Cracking, Active Surface Area, and Lithium Diffusion

Enrico Trevisanello et al.

Summary: The NCM family of cathode active materials with high nickel content is becoming the preferred choice for high performance lithium-ion batteries. Study shows that cracking of polycrystalline particles of NCM is not only detrimental, but also helps achieve higher reversible capacities and rate capability. Optimization of CAM size and morphology is crucial for achieving good rate capability with high-nickel NCMs.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Electrochemistry

Nonlinear Identifiability Analysis of the Porous Electrode Theory Model of Lithium-Ion Batteries

Marc D. Berliner et al.

Summary: Porous electrode theory is commonly used to model battery behavior, but most effective parameters are not practically identifiable from cycling data in lithium-ion batteries. The only identifiable parameter from C/10 discharge data is the effective solid diffusion coefficient. Additional experiments are required to uniquely determine the full set of parameters.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

添加到收藏夹

Review Chemistry, Physical

Vertically aligned two-dimensional materials-based thick electrodes for scalable energy storage systems

Zhengyu Ju et al.

Summary: This review summarizes important strategies for fabricating vertically aligned 2D materials-based electrodes to fully exploit their advantages in high-energy storage. The advantages and challenges of these methods in terms of key features of thick electrodes are discussed, and design principles for high-energy/power devices are illustrated.

NANO RESEARCH (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Achieving high energy density and high power density with pseudocapacitive materials

Christopher Choi et al.

NATURE REVIEWS MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Understanding Thickness-Dependent Transport Kinetics in Nanosheet-Based Battery Electrodes

Zhengyu Ju et al.

CHEMISTRY OF MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

Experimental study on a novel safety strategy of lithium-ion battery integrating fire suppression and rapid cooling

Yujun Liu et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Engineering, Environmental

Improved electrochemical property of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via in-situ ZrO2 coating for high energy density lithium ion batteries

Liu Yao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Physical

Segmented bi-material cathodes to boost the lithium-ion battery-capacitors

Tao Du et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

High energy lithium ion capacitors using hybrid cathodes comprising electrical double layer and intercalation host multi-layers

Sang Ho Lee et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Revealing the correlation between structural evolution and Li+ diffusion kinetics of nickel-rich cathode materials in Li-ion batteries

Chaoyu Hong et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Energy & Fuels

Pathways for practical high-energy long-cycling lithium metal batteries

Jun Liu et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Quantifying lithium concentration gradients in the graphite electrode of Li-ion cells using operando energy dispersive X-ray diffraction

Koffi P. C. Yao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density

Longlong Wang et al.

CHEMICAL SOCIETY REVIEWS (2018)

添加到收藏夹

Article Chemistry, Physical

Promoting the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode via LaAlO3 coating

Yong-Chun Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Physical

Pre-oxidizing the precursors of Nickel-rich cathode materials to regulate their Li+/Ni2+ cation ordering towards cyclability improvements

Qiyu Zhang et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Physical

Semi-empirical master curve concept describing the rate capability of lithium insertion electrodes

C. Heubner et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Physical

Hybrid lithium-ion capacitor with LiFePO4/AC composite cathode - Long term cycle life study, rate effect and charge sharing analysis

A. Shellikeri et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Quantitative Visualization of Salt Concentration Distributions in Lithium-Ion Battery Electrolytes during Battery Operation Using X-ray Phase Imaging

Daiko Takamatsu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Chemistry, Physical

Insight into the origin of lithium/nickel ions exchange in layered Li (NixMnyCoz)O-2 cathode materials

Yinguo Xiao et al.

NANO ENERGY (2018)

添加到收藏夹

Article Electrochemistry

Spray printing and optimization of anodes and cathodes for high performance Li-Ion batteries

Sang Ho Lee et al.

ELECTROCHIMICA ACTA (2018)

添加到收藏夹

Article Chemistry, Physical

Revealing the Rate-Limiting Li-Ion Diffusion Pathway in Ultrathick Electrodes for Li-Ion Batteries

Han Gao et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Exploiting a hybrid lithium ion power source with a high energy density over 30 Wh/kg

Liming Jin et al.

MATERIALS TODAY ENERGY (2018)

添加到收藏夹

Article Electrochemistry

Multiphase Porous Electrode Theory

Raymond B. Smith et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Material and Structural Design of Novel Binder Systems for High-Energy, High-Power Lithium-Ion Batteries

Ye Shi et al.

ACCOUNTS OF CHEMICAL RESEARCH (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reducing the Charge Carrier Transport Barrier in Functionally Layer-Graded Electrodes

Yanyan Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancement of the Rate Capability of LiFePO4 by a New Highly Graphitic Carbon-Coating Method

Jianjun Song et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Chemistry, Physical

On the correlation between electrode expansion and cycling stability of graphite/Si electrodes for Li-ion batteries

Juan Luis Gomez-Camer et al.

CARBON (2016)

添加到收藏夹

Article Chemistry, Physical

Microstructural study on degradation mechanism of layered LiNi0.6Co0.2Mn0.2O2 cathode materials by analytical transmission electron microscopy

Na Yeon Kim et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Physical

Thick electrodes for Li-ion batteries: A model based analysis

Timo Danner et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Following lithiation fronts in paramagnetic electrodes with in situ magnetic resonance spectroscopic imaging

Mingxue Tang et al.

NATURE COMMUNICATIONS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic effect of graphene and polypyrrole to enhance the SnO2 anode performance in lithium-ion batteries

Ruiqing Liu et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Ionic Conduction in Lithium Ion Battery Composite Electrode Governs Cross-sectional Reaction Distribution

Yuki Orikasa et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Chemistry, Physical

Nanostructured spinel LiNi0.5Mn1.5O4 as new insertion anode for advanced Li-ion capacitors with high power capability

Nagasubramanian Arun et al.

NANO ENERGY (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carbons and Electrolytes for Advanced Supercapacitors

Francois Beguin et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Article Chemistry, Physical

Investigation of Changes in the Surface Structure of LixNi0.8Co0.15Al0.05O2 Cathode Materials Induced by the Initial Charge

Sooyeon Hwang et al.

CHEMISTRY OF MATERIALS (2014)

添加到收藏夹

Article Chemistry, Physical

High performance lithium-ion hybrid capacitors with pre-lithiated hard carbon anodes and bifunctional cathode electrodes

Xianzhong Sun et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

The synergy effect on Li storage of LiFePO4 with activated carbon modifications

Bo Wang et al.

RSC ADVANCES (2013)

添加到收藏夹

Article Electrochemistry

The influence of activated carbon on the performance of lithium iron phosphate based electrodes

N. Boeckenfeld et al.

ELECTROCHIMICA ACTA (2012)

添加到收藏夹

Article Chemistry, Physical

Composite LiFePO4/AC high rate performance electrodes for Li-ion capacitors

N. Boeckenfeld et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

Article Chemistry, Physical

Hybridization of electrochemical capacitors and rechargeable batteries: An experimental analysis of the different possible approaches utilizing activated carbon, Li4Ti5O12 and LiMn2O4

Dario Cericola et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

Article Chemistry, Physical

A high rate, high capacity and long life (LiMn2O4 + AC)/Li4Ti5O12 hybrid battery-supercapacitor

Xuebu Hu et al.

JOURNAL OF POWER SOURCES (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.