☆ 4.7 Review

Sandwich Panels with Honeycomb and Foam Cores Subjected to Blast and Impact Load: A Revisit to Past Work

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Performance of an auxetic honeycomb-core sandwich panel under close-in and far-field detonations of high explosive

Rajendra Prasad Bohara et al.

Summary: This study analyzed the protective effect of a re-entrant auxetic honeycomb-core sandwich panel on reinforced concrete slabs under high explosive detonations using numerical models. The results showed that the AHSP had higher energy absorption and pressure deflection capabilities compared to the CHSP, making it more effective in protecting structures.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Low- and high-fidelity modeling of sandwich-structured composite response to bird strike, as tools for a digital-twin-assisted damage diagnosis

E. Giannaros et al.

Summary: The aerospace industry requires the use of high-performance composite materials to enhance structural efficiency, however, these composite structures are prone to damage from high-speed impact events. Early detection of damage in composite structures is crucial. This study develops computational models to predict dynamic behavior of helicopter composite sandwich structures undergoing bird strike, to be used as virtual tools for future fault detection techniques.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Geometric design, deformation mode, and energy absorption of patterned thin-walled structures

Jiayao Ma et al.

Summary: Thin-walled structures have been widely used as energy absorption devices due to their lightweight, high energy dissipating capability through large deformation, and low cost. This paper reviews the geometric design, deformation mode and mechanism, and energy absorption of patterned structures in the form of tubes, foldcores, and metamaterials. The main achievements and limitations of existing works are summarized, and suggestions for future research challenges are provided.

MECHANICS OF MATERIALS (2022)

添加到收藏夹

Article Engineering, Marine

Experimental and numerical simulation of dynamic response of U-type corrugated sandwich panels under low-velocity impact

Yuqin Cheng et al.

Summary: The dynamic response of U-type corrugated sandwich panels subjected to low-velocity impact was investigated through experimental and numerical analysis. The results showed that the deformation modes and performance were influenced by impact velocity and location. The experimental and simulation results were consistent, and the numerical simulation demonstrated reasonable accuracy. The transverse impact resistance performance was better than the longitudinal performance.

OCEAN ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Composites

Impact and CAI behavior of SGF mat filled sandwich panels made from foam core and FRP facesheet

Wenyan Liang et al.

Summary: The interlaminar bonding property plays a crucial role in enhancing the impact damage resistance ability of sandwich panels. In this study, short glass fiber (SGF) mat was used to improve the bonding strength between the facesheet and foam core. The newly designed sandwich panels were manufactured using vacuum-assisted resin injection processing. The results showed that SGF toughened sandwich panels exhibited the highest strength increase rate.

COMPOSITES COMMUNICATIONS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Shock resistance of elastomer-strengthened metallic corrugated core sandwich panels

Xin Wang et al.

Summary: This study systematically investigates the effect of polyurea coating on the shock resistance of fully-clamped metallic corrugated core sandwich panels against high-velocity aluminum foam projectile impact. The results show that the presence of polyurea coating helps reduce permanent deflection and prevent shear failure. The benefits of polyurea coating in mitigating impact deformation remain stable regardless of the projectile momentum, and thicker, larger, and impact-side coating is preferred. The improved performance is mainly attributed to enhanced plastic bending moment and membrane force in the polyurea-coated sandwich panel.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

Dynamic responses and energy absorption of sandwich panel with aluminium honeycomb core under ice wedge impact

Xiong Wu et al.

Summary: This paper investigates the dynamic responses and energy absorption characteristics of aluminium honeycomb sandwich panels (AHSPs) under ice wedge impact through numerical and experimental methods. The results show good agreement between numerical and experimental results and indicate the significant contribution of ice wedge energy dissipation to impact energy absorption.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

High-velocity impact resistance of doubly curved sandwich panels with re-entrant honeycomb and foam core

Fatih Usta et al.

Summary: This work investigates the high-velocity impact behavior of doubly curved sandwich panels and validates numerical models using experimental data. The results show that the curvature and core configuration play important roles in the impact resistance of the panels.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical studies on ballistic limit and cellular dispersion of aluminium foam sandwich panel under hypervelocity impact

Ruiqing Wang et al.

Summary: This study presents the ballistic limit and cellular dispersion analysis for open cell aluminum foam sandwich panels. It is found that aluminum foam with smaller cell size has better protection performance under the same relative density condition, and the topology of the foam also significantly influences the shielding performance.

MATERIALS TODAY COMMUNICATIONS (2022)

添加到收藏夹

Article Engineering, Marine

Study on the energy dissipation mechanism of the pyramidal lattice sandwich panel subjected to underwater explosion

Zhenhua Zhang et al.

Summary: The energy dissipation mechanism of a pyramidal lattice sandwich panel subjected to underwater explosion is studied in this paper. Through experiments and simulations, the deformation mode of the panel and the deformation process of each component are revealed. Theoretical solutions are also presented. The results show that the pyramidal lattice sandwich panel can effectively control the fluid-structure coupling effect and attenuate the impulse transmitted to the model.

MARINE STRUCTURES (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Comparative study on the blast load response of woven and lattice core metallic sandwich panels

Riya Mary Varghese et al.

Summary: Sandwich structures are effective in absorbing energy and managing blast loads due to their sacrificial cladding structures.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

A Critical Review of Blast Wave Parameters and Approaches for Blast Load Mitigation

P. A. Shirbhate et al.

Summary: The rise in casualties and economic losses from major terrorist attacks in recent decades has drawn attention to the performance of engineering structures under blast loads by scientists and structural engineers. The availability of small size explosive devices with powerful and high range explosive materials has significantly increased the threat posed by explosions. Analysis and design of structures vulnerable to such tragic events are necessary to resist extreme loading conditions caused by explosions.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2021)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

State-of-the-Art Review on Responses of RC Structures Subjected to Lateral Impact Loads

Chunwei Zhang et al.

Summary: The paper comprehensively reviews the responses and failure behaviors of concrete structures under lateral impact loads, as well as the influences of various structural and load-related parameters on impact resistance and failure behaviors.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2021)

添加到收藏夹

Article Engineering, Civil

Experimental study on failure mechanisms of sandwich panels with multi-layered aluminum foam/UHMWPE laminate core under combined blast and fragments loading

Sipei Cai et al.

Summary: This study investigated the failure mechanisms of sandwich panels with multilayered aluminum foam/UHMWPE laminate cores under combined blast and fragments loading. The results showed that introducing UHMWPE laminate alleviated back face damage, while the density gradation of foam layers and incorporation of ceramic fiber felt had varying effects on back face damage. The sandwich panels suffered more destructive damage under combined loading compared to bare blast loading, with the configuration of UHMWPE laminate located at the bottom layer favored for comprehensive protection.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Impact resistance of bio-inspired sandwich beam with side-arched and honeycomb dual-core

A. B. H. Kueh et al.

Summary: The study computationally explores the impact resistance of a bio-inspired sandwich beam, inspired by the beak, skull bone, hyoid, and spongy bone of the woodpecker head. Geometrical effects on impact behaviors are examined, and the beam with a thin arched core is found to perform optimally due to its high impact resistance efficiency index. Models with thicker arched cores exhibit higher contact force, damage area, and energy absorption, while thinner arched cores with varying leg spans are maximally stressed.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Design optimization and structural integrity simulation of aluminum foam sandwich construction for armored vehicle protection

Arief Nur Pratomo et al.

Summary: Structural blastworthiness refers to the ability of a structure to deform under blast impact while protecting the occupants and minimizing injury risks. Through optimized design parameters and material selection, the AFS structure shows promising blastworthy characteristics on armored vehicles.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Study on blast resistance of a composite sandwich panel with isotropic foam core with negative Poisson's ratio

Weitao Lv et al.

Summary: This paper established a sandwich panel with a 3D isotropic foam core with negative Poisson's ratio using FEM, and found that the sandwich panel with the minimum Poisson's ratio core exhibited the highest blast resistance performance.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

Internal blast resistance of sandwich cylinder with lattice cores

Jianfeng Li et al.

Summary: This study investigates the internal blast resistance of metal sandwich cylinder with lattice cores, focusing on the effects of core geometry, arrangement, wall thickness, shell mass distribution and cover. Results show that core geometry and arrangement significantly impact the blast resistance and deformation mechanism of sandwich cylinders. Asymmetric design of inner and outer shells enhances internal blast resistance of the sandwich cylinders.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Civil

Experimental and numerical simulation study on polyurea-coated fuel tank subjected to combined action of blast shock waves and fragments

Gang Wu et al.

Summary: This paper investigates the effect of two types of polyurea materials on enhancing the damage resistance of fuel tanks, and experimentally discovers the differences in their protective abilities. Numerical simulations reveal the protective effects of the polyurea coatings on the fuel tank.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Design and optimization of multi-V hulls of light armoured vehicles under blast loads

Ming Cong et al.

Summary: Three hull shapes were designed to mitigate blast loads from mines and improvised explosive devices under a vehicle, with the double-V hull showing the best protection performance and reduced occupant damage. Through optimization, the protection performance can be further improved by changing the dimension parameters of the hull design.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Impact behavior of a cladding sandwich panel with aluminum foam-filled tubular cores

Jingyi Lu et al.

Summary: A novel cladding sandwich panel with aluminum foam-filled tubular cores was proposed to enhance impact resistance, with a study showing that the aluminum foam and tubular cores dissipate the majority of impact energy. Improvements in impact force and energy absorption were found by filling aluminum foam, increasing density, and increasing contact area between impactor and panel. Impact position had little effect on energy absorption when away from panel edge, and similar thickness between flat steel plate and tubular cores generally resulted in better energy absorption performances.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Blast resistance of metallic double arrowhead honeycomb sandwich panels with different core configurations under the paper tube-guided air blast loading

Ganchao Chen et al.

Summary: The abstract discusses the attention attracted by the negative Poisson's ratio of auxetic double arrowhead honeycombs and their unique mechanical properties. It presents the production of metallic DAHs and their use as sandwich cores for sandwich panels, as well as an experimental investigation on their dynamic responses under air blasts. The study highlights the influence of core configurations on deformation/failure modes, mechanisms, and blast resistance, providing insights for design, manufacturing, and optimization of auxetic sandwich structures.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Review of contact modelling in nonlinear finite element analysis

Tejal Pore et al.

Summary: Finite Element Analysis (FEA) provides approximate solutions to engineering problems using the Finite Element Method (FEM). It is widely used in automotive, medical, aerospace industries for research and development. Structural analysis in FEM is categorized into Linear and Nonlinear analysis, with causes of non-linearity including large deformations, use of elastic-plastic material, and Constraint/Contact in geometries.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Blast mitigation using sandwich panels with saffil foam

Payal A. Shirbhate et al.

Summary: The demand for protection of important government and public buildings has increased due to frequent terrorist activities worldwide. Sandwich panels are used to protect the parent structure by mitigating blast pressure, and provision of stiffeners considerably improves their blast mitigation capacity.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Engineering, Civil

Response mechanisms of reinforced concrete panels to the combined effect of close-in blast and fragments: An integrated experimental and numerical analysis

Paolo Del Linz et al.

Summary: This study focuses on the effects of cased explosives on reinforced concrete components, developing finite element analysis techniques to simulate the combined loading and interaction. Experimental data and literature tests were used to validate the models, showing good agreement with most damage patterns. The blast load mainly caused bending deformations and damage, while fragments resulted in larger overall damage than each factor individually.

INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2021)

添加到收藏夹

Article Construction & Building Technology

Damage Mitigation of a Steel Column Subjected to Automobile Collision Using a Honeycomb Panel

Hyungoo Kang et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2020)

添加到收藏夹

Article Engineering, Civil

Computational analysis and optimization of sandwich panels with homogeneous and graded foam cores for blast resistance

Erdong Wang et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Mechanical

Dynamic response of sandwich panels with multi-layered aluminum foam/Check for UHMWPE laminate cores under air blast loading

Sipei Cai et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

Dynamic analysis of a stiffened composite plate under blast load: A new model and experimental validation

Demet Balkan et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

添加到收藏夹

Article Engineering, Civil

Investigation on the dynamic response of circular sandwich panels with the bio-inspired gradient core

Hairen Wang et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Crashworthiness analysis of corrugations reinforced multi-cell square tubes

Zhixiang Li et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Chemistry, Physical

Simulation Study of Adhesive Material for Sandwich Panel under Edgewise Compression Condition

Lanxin Jiang et al.

MATERIALS (2020)

添加到收藏夹

Article Mechanics

Deformation and failure of hybrid composite sandwich beams with a metal foam core under quasi-static load and low-velocity impact

Wei Zhang et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic crushing responses of bio-inspired re-entrant auxetic honeycombs under in-plane impact loading

Xin-chun Zhang et al.

MATERIALS TODAY COMMUNICATIONS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Process induced deformations in composite sandwich panels using an in-homogeneous layup design

M. Al-Dhaheri et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Civil

Flexural and shear characteristics of bio-based sandwich beams made of hollow and foam-filled paper honeycomb cores and flax fiber composite skins

Yuchen Fu et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Mechanical

Blast response of aluminum foam sandwich panel with double V-shaped face plate

Yuan Li et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

On low-velocity impact response of foam-core sandwich panels

Xintao Huo et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Construction & Building Technology

Trapezoidal core sandwich panel produced with sugarcane bagasse

Thales Pozzer et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Numerical Modeling of Shallow Buried Tunnel Subject to Surface Blast Loading

Jagriti Mandal et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2020)

添加到收藏夹

Article Engineering, Civil

Bending behavior of sandwich beam with tailored hierarchical honeycomb cores

Zhendong Li et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Contact underwater explosion response of metallic sandwich panels with different face-sheet configurations and core materials

Ganchao Chen et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Dynamic performance of a sandwich structure with honeycomb composite core for bridge pier protection from vehicle impact

Jin Pan et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Deflection analysis of clamped square sandwich panels with layered-gradient foam cores under blast loading

Xiongfei Zhou et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Composites

Cutout effects of in-plane loaded lattice-core sandwich panels

Wenyi Bao et al.

COMPOSITES COMMUNICATIONS (2020)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Low Velocity Impact Behavior of Closed-Cell Aluminum Foam Considering Effect of Foam Skin

Y. M. Chordiya et al.

ADVANCES IN MATERIALS AND MANUFACTURING ENGINEERING, ICAMME 2019 (2020)

添加到收藏夹

Article Engineering, Civil

Low-energy impact response of composite sandwich panels with thermoplastic honeycomb and reentrant cores

Ismail Ozen et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Mechanics

Parametric study and optimization of the protect system containing a re-entrant hexagon cored sandwich panel under blast impact

Chang Qi et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Construction & Building Technology

Structural Behavior of Sandwich Beams with Flax Fiber-Reinforced Polymer Faces and Cardboard Cores under Monotonic and Impact Loads

Dillon Betts et al.

JOURNAL OF ARCHITECTURAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

Numerical investigation on the dynamic response of foam-filled corrugated core sandwich panels subjected to air blast loading

Yuansheng Cheng et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)

添加到收藏夹

Article Engineering, Mechanical

Blast resistance and energy absorption of sandwich panels with layered gradient metallic foam cores

Lin Jing et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)

添加到收藏夹

Article Mechanics

Blast response of water-backed metallic sandwich panels subject to underwater explosion - Experimental and numerical investigations

Lijie Ren et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Low-velocity impact characteristics of closed cell AA2014-SiCp composite foam

S. Sahu et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Crushing resistance and energy absorption of pomelo peel inspired hierarchical honeycomb

Zhang Wen et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Mechanics

A low velocity impact study on press formed thermoplastic honeycomb sandwich panels

Manoja Rao Yellur et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Marine

Experimental and numerical analyses on the dynamic response of aluminum foam core sandwich panels subjected to localized air blast loading

Ganchao Chen et al.

MARINE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Civil

Effect of structural parameters on low-velocity impact behavior of aluminum honeycomb sandwich structures with CFRP face sheets

Wentao He et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

A new method for the study of parabolic impact of foam-core sandwich panels

Karthik Ram Ramakrishnan et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

High Strain Rate Response of Cenosphere-Filled Aluminum Alloy Syntactic Foam

M. D. Goel et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

添加到收藏夹

Article Mechanics

Experimental study on low-velocity impact responses and residual properties of composite sandwiches with metallic foam core

Xintao Huo et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Civil

Dynamic response of sandwich panel with hierarchical honeycomb cores subject to blast loading

Guangyong Sun et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Mechanics

Study on the impact resistance of honeycomb sandwich structures under low-velocity/heavy mass

Xinwei Xue et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

Response of energy absorbing connector with polyurethane foam and multiple pleated plates under impact loading

Wang Yonghui et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Engineering, Civil

Experimental, numerical, and analytical studies on polyurethane foam-filled energy absorption connectors under quasi-static loading

Yonghui Wang et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Mechanics

Wooden sandwich panels with prismatic core - Energy absorbing capabilities

Jerzy Smardzewski

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Review Engineering, Manufacturing

Crushing behavior of honeycomb structure: a review

Tiju Thomas et al.

INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2019)

添加到收藏夹

Article Engineering, Mechanical

Impact perforation of aluminium Cymat foam

I Elnasri et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Energy absorption of a bio-inspired honeycomb sandwich panel

Ngoc San Ha et al.

JOURNAL OF MATERIALS SCIENCE (2019)

添加到收藏夹

Article Construction & Building Technology

Response of Metallic Sandwich Panels to Blast Loads

Sameh Ahmed et al.

JOURNAL OF STRUCTURAL ENGINEERING (2019)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Low Velocity Impact Behavior of Aluminum Cenosphere Syntactic Foam

Y. M. Chordiya et al.

MATERIALS TODAY-PROCEEDINGS (2019)

添加到收藏夹

Article Engineering, Mechanical

Flexural and axial behaviour of sandwich panels with bio-based flax fibre-reinforced polymer skins and various foam core densities

Luke CoDyre et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2018)

添加到收藏夹

Article Mechanics

A numerical study on the impact behaviour of natural fibres made honeycomb cores

A. Riccio et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Blast resistance of auxetic and honeycomb sandwich panels: Comparisons and parametric designs

Gabriele Imbalzano et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Blast resistance and parametric study of sandwich structure consisting of honeycomb core filled with circular metallic tubes

Jiefu Liu et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Civil

Dynamic crushing behavior and energy absorption of graded lattice cylindrical structure under axial impact load

Liming Chen et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Dynamic response of double-layer rectangular sandwich plates with metal foam cores subjected to blast loading

Zhang Jianxun et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

添加到收藏夹

Article Engineering, Mechanical

High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations

Guangyong Sun et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

添加到收藏夹

Article Engineering, Mechanical

The effects of foam filling on the dynamic response of metallic corrugated core sandwich panel under air blast loading - Experimental investigations

Yuansheng Cheng et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Civil

Experimental, numerical and analytical studies on the aluminum foam filled energy absorption connectors under impact loading

Yonghui Wang et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Crashworthiness of hierarchical circular-joint quadrangular honeycombs

Yaozhong Wu et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Low-velocity impact behaviour of sandwich panels with homogeneous and stepwise graded foam cores

Guangyong Sun et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties of sandwich composites with 3d-printed auxetic and non-auxetic lattice cores under low velocity impact

Shaoyu Hou et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation and simplified modeling of response of steel plates subjected to close-in blast loading from spherical liquid explosive charges

Alex Remennikov et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

添加到收藏夹

Article Engineering, Mechanical

Damage and deformation in composite sandwich panels exposed to multiple and single explosive blasts

H. Arora et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

添加到收藏夹

Article Engineering, Civil

Parametric Study on Mechanical Responses of Corrugated-Core Sandwich Panels for Bridge Decks

Mehdi Tehrani et al.

JOURNAL OF BRIDGE ENGINEERING (2017)

添加到收藏夹

Article Construction & Building Technology

Numerical Simulation of FRP Sandwich Panels under Blast Effects

Sameh Ahmed et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2017)

添加到收藏夹

Article Construction & Building Technology

Out-of-Plane Behavior of Lightweight Metallic Sandwich Panels

Yasser A. Khalifa et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2017)

添加到收藏夹

Article Engineering, Civil

Mechanical response of V shaped plates under blast loading

Agesh Markose et al.

THIN-WALLED STRUCTURES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Static and dynamic crushing responses of CFRP sandwich panels filled with different reinforced materials

Yanqin Zhang et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Engineering, Civil

Parametric analysis study of blast loaded armour V-plates

Jovan Trajkovski et al.

INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: Experimental tests and numerical simulations

Chang Qi et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic crash responses of bio-inspired aluminum honeycomb sandwich structures with CFRP panels

Yinghan Wu et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Mechanics

On low-velocity impact response of metal foam core sandwich beam: A dual beam model

Qinghua Qin et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

Sandwich panels with layered graded aluminum honeycomb cores under blast loading

Shiqiang Li et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Response Analysis of Blast Impact Loading of Metal-Foam Sandwich Panels

Sigit P. Santosa et al.

PLASTICITY AND IMPACT MECHANICS (2017)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Failure analysis of V-shaped plates under blast loading

Agesh Markose et al.

PLASTICITY AND IMPACT MECHANICS (2017)

添加到收藏夹

Article Mechanics

Drop-weight impact behavior of honeycomb sandwich panels under a spherical impactor

Dahai Zhang et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

Low-velocity impact response of composite sandwich structures: Modelling and experiment

Yuan Chen et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

Effectiveness of FRP sandwich panels for blast resistance

Sameh Ahmed et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

Theoretical and numerical investigation of blast responses of continuous-density graded cellular materials

Minzu Liang et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Construction & Building Technology

Comparative performance of composite sandwich panels and non-composite panels under blast loading

Vasant A. Matsagar

MATERIALS AND STRUCTURES (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic Crushing Strength Analysis of Auxetic Honeycombs

Xiuhui Hou et al.

ACTA MECHANICA SOLIDA SINICA (2016)

添加到收藏夹

Article Engineering, Manufacturing

Finite element analysis of sandwich panels with stepwise graded aluminum honeycomb cores under blast loading

Shiqiang Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic response and failure of PVC foam core metallic sandwich subjected to underwater impulsive loading

Wei Huang et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Impact response of ductile self-reinforced composite corrugated sandwich beams

C. Schneider et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic response of sandwich structures with graded auxetic honeycomb cores under blast loading

Xiaochao Jin et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

The dynamic response of sandwich panels with cellular metal cores to localized impulsive loading

Lin Jing et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Mechanical

The effects of blast-induced fragments on cellular materials

N. Ranwaha et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and GFRP Core

Hai Fang et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental study of the medium velocity impact response of sandwich panels with different cores

Hongxu Wang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crashworthiness of vertex based hierarchical honeycombs in out-of-plane impact

Guangyong Sun et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Mechanics

Failure mechanism of sandwich beams subjected to three-point bending

Banghai Jiang et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mathematics, Applied

Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases

Na Qiu et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2015)

添加到收藏夹

Article Engineering, Mechanical

Blast resistance of stiffened sandwich panels with aluminum cenosphere syntactic foam

Manmohan Dass Goel et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)

添加到收藏夹

Article Engineering, Civil

On design of multi-cell tubes under axial and oblique impact loads

Jianguang Fang et al.

THIN-WALLED STRUCTURES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influences of weaving architectures on the impact resistance of multi-layer fabrics

Cheng-Chou Yang et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Mechanics

Dynamic behavior of aluminum honeycomb sandwich panels under air blast: Experiment and numerical analysis

Xin Li et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Mechanics

Energy absorption and low velocity impact response of polyurethane foam filled pyramidal lattice core sandwich panels

Guoqi Zhang et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

High-speed axial impact of aluminum honeycomb - Experiments and simulations

Zhonggang Wang et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Low velocity transverse impact response of a composite sandwich plate subjected to a rigid blunted cylindrical impactor

K. Malekzadeh Fard et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Engineering, Mechanical

Relative performance of metal and polymeric foam sandwich plates under low velocity impact

A. Rajaneesh et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

添加到收藏夹

Article Engineering, Mechanical

Crushing analysis of foam-filled single and bitubal polygonal thin-walled tubes

Gang Zheng et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)

添加到收藏夹

Article Engineering, Civil

Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections

A. Alavi Nia et al.

THIN-WALLED STRUCTURES (2014)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Nonlinear damped vibrations of a hybrid laminated composite plate subjected to blast load

Suleyman Basturk et al.

INTERNATIONAL SYMPOSIUM ON DYNAMIC RESPONSE AND FAILURE OF COMPOSITE MATERIALS (DRAF2014) (2014)

添加到收藏夹

Article Mechanics

Dynamic behavior of graded honeycombs - A finite element study

C. J. Shen et al.

COMPOSITE STRUCTURES (2013)

添加到收藏夹

Article Engineering, Manufacturing

Ballistic resistance of hybrid-cored sandwich plates: Numerical and experimental assessment

C. Y. Ni et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic response of clamped sandwich beam with aluminium alloy foam core subjected to impact loading

Z. H. Tan et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Energy absorption and failure mechanism of metallic cylindrical sandwich shells under impact loading

Lin Jing et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Advanced composite sandwich structure design for energy absorption applications: Blast protection and crashworthiness

F. Tarlochan et al.

COMPOSITES PART B-ENGINEERING (2012)

添加到收藏夹

Article Materials Science, Composites

The low velocity impact response of foam-based sandwich panels

Jin Zhou et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Multidisciplinary Sciences

Behaviour of a Blast Loaded Laced Reinforced Concrete Structure

N. Anandavalli et al.

DEFENCE SCIENCE JOURNAL (2012)

添加到收藏夹

Article Multidisciplinary Sciences

An Abridged Review of Blast Wave Parameters

Manmohan Dass Goel et al.

DEFENCE SCIENCE JOURNAL (2012)

添加到收藏夹

Article Engineering, Mechanical

The impact response of clamped sandwich beams with ordinary and hierarchical cellular cores

T. Yi et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)

添加到收藏夹

Article Engineering, Mechanical

Collapse modes in aluminium honeycomb sandwich panels under bending and impact loading

V. Crupi et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)

添加到收藏夹

Article Mechanics

Hierarchical honeycombs with tailorable properties

Amin Ajdari et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

添加到收藏夹

Article Engineering, Civil

Influences of Material Properties on Energy Absorption of Composite Sandwich Panels under Blast Loads

Hong Su et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2012)

添加到收藏夹

Article Mechanics

A modified energy-balance model to predict low-velocity impact response for sandwich composites

C. C. Foo et al.

COMPOSITE STRUCTURES (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Performance of sandwich composites subjected to sequential impact and air blast loading

Matthew Jackson et al.

COMPOSITES PART B-ENGINEERING (2011)

添加到收藏夹

Article Construction & Building Technology

Response of Curved Sandwich Panels Subjected to Blast Loading

Jianhu Shen et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Impact response of aluminum foam core sandwich structures

Kapil Mohan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Engineering, Civil

Dynamic Response of Stiffened Plates under Air Blast

Manmohan Dass Goel et al.

INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2011)

添加到收藏夹

Article Engineering, Mechanical

Ballistic impact experiments of metallic sandwich panels with aluminium foam core

Weihong Hou et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)

添加到收藏夹

Article Engineering, Mechanical

A numerical simulation of the blast impact of square metallic sandwich panels

Feng Zhu et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2009)

添加到收藏夹

Article Mechanics

The blast resistance of sandwich composites with stepwise graded cores

Erheng Wang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)

添加到收藏夹

Article Mechanics

Low-velocity impact failure of aluminium honeycomb sandwich panels

C. C. Foo et al.

COMPOSITE STRUCTURES (2008)

添加到收藏夹

Article Engineering, Multidisciplinary

The high strain rate response of PVC foams and end-grain balsa wood

V. L. Tagarielli et al.

COMPOSITES PART B-ENGINEERING (2008)

添加到收藏夹

Article Engineering, Mechanical

Deformation and failure of blast-loaded metallic sandwich panels - Experimental investigations

Feng Zhu et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)

添加到收藏夹

Article Engineering, Civil

STIFFENED PLATES SUBJECTED TO UNIFORM BLAST LOADING

Abdelkrim Kadid

JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT (2008)

添加到收藏夹

Article Materials Science, Composites

Static and low velocity impact behavior of composite sandwich panels with an aluminum foam core

German Reyes

JOURNAL OF COMPOSITE MATERIALS (2008)

添加到收藏夹

Article Engineering, Civil

A Study on Mesh Size Dependency of Finite Element Blast Structural Analysis Induced by Non-uniform Pressure Distribution from High Explosive Blast Wave

Jin Won Nam et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2008)

添加到收藏夹

Article Engineering, Geological

Importance of time step discretisation for nonlinear dynamic finite element analysis

SK Haigh et al.

CANADIAN GEOTECHNICAL JOURNAL (2005)

添加到收藏夹

Article Engineering, Mechanical

Deformation and failure mechanism of dynamically loaded sandwich beams with aluminum-foam core

JL Yu et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.