相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Internal exhaust gas recirculation via reinduction and negative valve overlap for fuel-efficient aftertreatment thermal management at curb idle in a diesel engine
Mrunal C. Joshi et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2022)
Thermal analysis comparison of nano-additive PCM-based engine waste heat recovery thermal storage systems: an experimental study
Chandrmani Yadav et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)
Impact of multi-injection strategies on morphology, nanostructure and oxidation reactivity of diesel soot particles
Xingyu Liang et al.
COMBUSTION AND FLAME (2022)
Post-injection strategies for performance improvement and emissions reduction in DI diesel engines-A review
Sheikh Muhammad Farhan et al.
FUEL PROCESSING TECHNOLOGY (2022)
Analysis on the potential of EGR strategy to reduce fuel consumption in hybrid powertrains based on advanced gasoline engines under simulated driving cycle conditions
Hector Climent et al.
ENERGY CONVERSION AND MANAGEMENT (2022)
Performance interaction assessment of automobile exhaust thermoelectric generator and engine under different operating conditions
Rui Quan et al.
APPLIED THERMAL ENGINEERING (2022)
Improvement of volume controlled thermal energy storage system using phase change material for exhaust waste heat recovery in a SI engine
Habib Guerbuez et al.
JOURNAL OF ENERGY STORAGE (2022)
Fuel-efficient thermal management in diesel engines via valvetrain-enabled cylinder ventilation strategies
Dheeraj B. Gosala et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2021)
Diesel engine optimization and exhaust thermal management by means of variable valve train strategies
Francisco J. Arnau et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2021)
Assessment of the improvement of internal combustion engines cooling system using nanofluids and nanoencapsulated phase change materials
Antonio Jose Torregrosa et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2021)
Comparison of intake and exhaust throttling for diesel particulate filter active regeneration of non-road diesel engine with mechanical fuel injection pump
Wonmo Kang et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2021)
Investigation on the EGR effect to further improve fuel economy and emissions effect of Miller cycle turbocharged engine
Kai Shen et al.
ENERGY (2021)
A Review of Energy Loss Reduction Technologies for Internal Combustion Engines to Improve Brake Thermal Efficiency
Zhijian Wang et al.
ENERGIES (2021)
Design and thermodynamic analysis of a combined system including steam Rankine cycle, organic Rankine cycle, and power turbine for marine low-speed diesel engine waste heat recovery
Jinbo Qu et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
Energy flow behavior and emission reduction of a turbo-charging and EGR non-road diesel engine equipped with DOC and DPF under NRTC (non-road transient cycle)
Songyu Hu et al.
FUEL (2021)
A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage
Shuai Zhang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
Intensification of thermal energy storage using copper-pentaerythritol nanocomposites for renewable energy utilization
Dineshkumar Mani et al.
RENEWABLE ENERGY (2021)
Different exhaust temperature management technologies for heavy-duty diesel engines with regard to thermal efficiency
Binyang Wu et al.
APPLIED THERMAL ENGINEERING (2021)
Research progress on utilization of phase change materials in photovoltaic/ thermal systems: A critical review
Qinghua Yu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
A comprehensive review of waste heat recovery from a diesel engine using organic rankine cycle
P. Varshil et al.
ENERGY REPORTS (2021)
Simulation study on exhaust turbine power generation for waste heat recovery from exhaust of a diesel engine
Yongming Xu et al.
ENERGY REPORTS (2021)
The performance improvement of direct injection engines in cold start conditions integrating with phase change material: Energy and exergy analysis
Galip Kaltakkiran et al.
JOURNAL OF ENERGY STORAGE (2021)
Miller cycle combined with exhaust gas recirculation and post-fuel injection for emissions and exhaust gas temperature control of a heavy-duty diesel engine
Wei Guan et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2020)
Phase change materials (PCMs) for improving solar still productivity: a review
Adil A. M. Omara et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Maximizing specific work output extracted from engine exhaust with novel inverted Brayton cycles over a large range of operating conditions
Noemie Chagnon-Lessard et al.
ENERGY (2020)
Wood-based composite phase change materials with self-cleaning superhydrophobic surface for thermal energy storage
Haiyue Yang et al.
APPLIED ENERGY (2020)
Assessment of waste heat recovery system for automotive engine with weight effect
Lingfeng Shi et al.
ENERGY (2020)
Energy and exergy analyses of latent heat storage unit positioned at different orientations - An experimental study
Lokesh Kalapala et al.
ENERGY (2020)
Low melt alloy blended polyalcohol as solid-solid phase change material for energy storage: An experimental study
K. P. Venkitaraj et al.
APPLIED THERMAL ENGINEERING (2020)
Nanoparticles enhanced phase change materials (NePCMs)-A recent review
Syeda Laraib Tariq et al.
APPLIED THERMAL ENGINEERING (2020)
Nanoencapsulation of phase change materials (PCMs) and their applications in various fields for energy storage and management
Elham Alehosseini et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)
Distributed Energy and Thermal Management of a 48-V Diesel Mild Hybrid Electric Vehicle With Electrically Heated Catalyst
Yuxing Liu et al.
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2020)
A comprehensive review of future thermal management systems for battery-electrified vehicles
Joris Jaguemont et al.
JOURNAL OF ENERGY STORAGE (2020)
Exploring alternative combustion control strategies for low-load exhaust gas temperature management of a heavy-duty diesel engine
Wei Guan et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2019)
Reverse breathing in diesel engines for aftertreatment thermal management
Aswin K. Ramesh et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2019)
Experimental Investigation of an Inverted Brayton Cycle for Exhaust Gas Energy Recovery
Ian Kennedy et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2019)
Thermal energy storage system for efficient diesel exhaust aftertreatment at low temperatures
M. R. Hamedi et al.
APPLIED ENERGY (2019)
Investigation of organic Rankine cycle integrated with double latent thermal energy storage for engine waste heat recovery
Xiaoli Yu et al.
ENERGY (2019)
Recent developments in phase change materials for energy storage applications: A review
Hassan Nazir et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
A comprehensive review of organic rankine cycle waste heat recovery systems in heavy-duty diesel engine applications
Bin Xu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
On the emission reduction through the application of an electrically heated catalyst to a diesel vehicle
Jianbing Gao et al.
ENERGY SCIENCE & ENGINEERING (2019)
Exergy and energy comparison of organic phase change materials based thermal energy storage system integrated with engine exhaust
Chandrmani Yadav et al.
JOURNAL OF ENERGY STORAGE (2019)
A zero-dimensional model for simulation of a Diesel engine and exergoeconomic analysis of waste heat recovery from its exhaust and coolant employing a high-temperature Kalina cycle
Farzad Mohammadkhani et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Review of thermal management of catalytic converters to decrease engine emissions during cold start and warm up
Jianbing Gao et al.
APPLIED THERMAL ENGINEERING (2019)
Preparation of a novel composite phase change material (PCM) and its locally enhanced heat transfer for power battery module
Deqiu Zou et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Thermal performance of stearic acid/carbon nanotube composite phase change materials for energy storage prepared by ball milling
Li Yang et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)
Effect of post-injection on combustion and exhaust emissions in DI diesel engine
Yan Wu et al.
FUEL (2019)
Optimal fin parameters used for enhancing the melting and solidification of phase-change material in a heat exchanger unite
Ammar M. Abdulateef et al.
CASE STUDIES IN THERMAL ENGINEERING (2019)
Impact of Cylinder Deactivation and Cylinder Cutout via Flexible Valve Actuation on Fuel Efficient Aftertreatment Thermal Management at Curb Idle
Kalen R. Vos et al.
FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND (2019)
Diesel engine aftertreatment warm-up through early exhaust valve opening and internal exhaust gas recirculation during idle operation
Dheeraj B. Gosala et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2018)
Latent Heat Thermal Energy Storage Systems with Solid-Liquid Phase Change Materials: A Review
Nan Zhang et al.
ADVANCED ENGINEERING MATERIALS (2018)
Experimental study on the thermal performance of nano enhanced pentaerythritol in IC engine exhaust heat recovery application
K. P. Venkitaraj et al.
APPLIED THERMAL ENGINEERING (2018)
Further analysis of a compression-expansion machine for a Brayton Waste Heat Recovery cycle on an IC engine
J. Galindo et al.
APPLIED THERMAL ENGINEERING (2018)
Experimental investigation of exhaust thermal management on NOx emissions of heavy-duty diesel engine under the world Harmonized transient cycle (WHTC)
Shuzhan Bai et al.
APPLIED THERMAL ENGINEERING (2018)
Thermal management of newly developed non-noble metal-based catalytic converter to reduce cold start emissions of small internal combustion engine
Shoaib Raza Khan et al.
CHEMICAL ENGINEERING COMMUNICATIONS (2018)
Brayton cycles as waste heat recovery systems on series hybrid electric vehicles
Wissam Bou Nader et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Improving indoor thermal comfort by using phase change materials: A review
Abuelnuor A. A. Abuelnuor et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)
Emission analysis of a CI engine during cold weather conditions using pre-heated air and engine using waste energy and phase-change material
M. K. Rath et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2018)
A review on various after treatment techniques to reduce NOx emissions in a CI engine
V. Praveena et al.
JOURNAL OF THE ENERGY INSTITUTE (2018)
Experimental study on heat storage system using phase-change material in a diesel engine
Sangki Park et al.
ENERGY (2017)
Thermoelectric generators: A review of applications
Daniel Champier
ENERGY CONVERSION AND MANAGEMENT (2017)
Cylinder deactivation during dynamic diesel engine operation
Dheeraj B. Gosala et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2017)
Utilizing low airflow strategies, including cylinder deactivation, to improve fuel efficiency and aftertreatment thermal management
Aswin K. Ramesh et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2017)
Individual particles emitted from gasoline engines: Impact of engine types, engine loads and fuel components
Jiaoping Xing et al.
JOURNAL OF CLEANER PRODUCTION (2017)
CI engine performance during cold weather condition using preheated air and engine by waste energy
M. K. Rath et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2017)
Achieving Ultra Low NOX Emissions Levels with a 2017 Heavy-Duty On-Highway TC Diesel Engine and an Advanced Technology Emissions System - Thermal Management Strategies
Christopher Sharp et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2017)
Effects of application of variable valve timing on the exhaust gas temperature improvement in a low-loaded diesel engine
Hasan Ustun Basaran et al.
APPLIED THERMAL ENGINEERING (2017)
Fuel efficient exhaust thermal management for compression ignition engines during idle via cylinder deactivation and flexible valve actuation
Chuan Ding et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2016)
Application of Plasma Fuel Reformer to an On-Board Diesel Burner
Sung Hyun Pyun et al.
PLASMA CHEMISTRY AND PLASMA PROCESSING (2016)
Fuel-efficient exhaust thermal management using cylinder throttling via intake valve closing timing modulation
Akash Garg et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2016)
Experimental investigation on latent heat thermal energy storage system for stationary CI engine exhaust
Dheeraj Kishor Johar et al.
APPLIED THERMAL ENGINEERING (2016)
A review of car waste heat recovery systems utilising thermoelectric generators and heat pipes
B. Orr et al.
APPLIED THERMAL ENGINEERING (2016)
A review of waste heat recovery technologies for maritime applications
Dig Vijay Singh et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility
Zakir Khan et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Potential of internal EGR and throttled operation for low load extension of ethanol-diesel dual-fuel reactivity controlled compression ignition combustion on a heavy-duty engine
Vinicius B. Pedrozo et al.
FUEL (2016)
Reduction of Cold-Start Emissions through Valve Timing in a GDI Engine
J. Felipe Rodriguez et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2016)
A study of the effect of post injection on combustion and emissions with premixing enhanced fueling strategies
Marko Jeftic et al.
APPLIED ENERGY (2015)
Experimental Investigation of a Cascaded Latent Heat Storage System for Diesel Engine Waste Heat Recovery
M. Chinnapandian et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2015)
A review of turbocompounding as a waste heat recovery system for internal combustion engines
Habib Aghaali et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Particle and NOx emissions of a non-road diesel engine with an SCR unit: The effect of fuel
Mari Pietikainen et al.
RENEWABLE ENERGY (2015)
Modeling the impact of early exhaust valve opening on exhaust aftertreatment thermal management and efficiency for compression ignition engines
Leighton Roberts et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2015)
A Challenging Future for the IC Engine: New Technologies and the Control Role
F. Payri et al.
OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2015)
Analytical Investigation of Urea Deposits in SCR System
Colin L. Weeks et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2015)
Improved heat storage rate for an automobile coolant waste heat recovery system using phase-change material in a fin-tube heat exchanger
Jungwook Shon et al.
APPLIED ENERGY (2014)
Control-oriented model for integrated diesel engine and aftertreatment systems thermal management
Pingen Chen et al.
CONTROL ENGINEERING PRACTICE (2014)
Experimental investigation of diesel and biodiesel post injections during active diesel particulate filter regenerations
Pingen Chen et al.
FUEL (2014)
Plasma Burner for Active Regeneration of Diesel Particulate Filter
Dae Hoon Lee et al.
PLASMA CHEMISTRY AND PLASMA PROCESSING (2014)
The effect of cylinder deactivation on the performance of a diesel engine
Haijun Mo et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2014)
Fatty acids as phase change materials: A review
Yanping Yuan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
A review of energy consumption, management, and recovery in automotive systems, with considerations of future trends
Fabio Chiara et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2013)
Diesel Cold-Start Emission Control Research for 2015-2025 LEV III Emissions
Gary D. Neely et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2013)
Investigation of VVA-Based Exhaust Management Strategies by Means of a HD Single Cylinder Research Engine and Rapid Prototyping Systems
Sebastian Gehrke et al.
SAE INTERNATIONAL JOURNAL OF COMMERCIAL VEHICLES (2013)
Catalyst 'light-off' experiments on a diesel oxidation catalyst connected to a diesel engine-Methodology and techniques
Shifei Ye et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2012)
Experimental investigation on heat recovery from diesel engine exhaust using finned shell and tube heat exchanger and thermal storage system
V. Pandiyarajan et al.
APPLIED ENERGY (2011)
Catalyst light-off behavior of a spark-ignition LPG (liquefied petroleum gas) engine during cold start
Changming Gong et al.
ENERGY (2011)
Second law analysis of a diesel engine waste heat recovery with a combined sensible and latent heat storage system
V. Pandiyarajan et al.
ENERGY POLICY (2011)
Electrically Heated Catalysts for Hybrid Applications: Mathematical Modeling and Analysis
Karthik Ramanathan et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
Comparative design study of a diesel exhaust gas heat exchanger for truck applications with conventional and state of the art heat transfer enhancements
S. Mavridou et al.
APPLIED THERMAL ENGINEERING (2010)
Temperature optimisation of a diesel engine using exhaust gas heat recovery and thermal energy storage (diesel engine with thermal energy storage)
Pertti Kauranen et al.
APPLIED THERMAL ENGINEERING (2010)
Fuel Penalty Comparison for (Electrically) Heated Catalyst Technology
J. T. B. A. Kessels et al.
OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2010)
Effects of Secondary Air Injection During Cold Start of SI Engines
Dongkun Lee et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2010)
Reducing cold-start emission from internal combustion engines by means of thermal energy storage system
M. Gumus
APPLIED THERMAL ENGINEERING (2009)
Cold-start emissions of modern passenger cars at different low ambient temperatures and their evolution over vehicle legislation categories
Martin Weilenmann et al.
ATMOSPHERIC ENVIRONMENT (2009)
The Effect of Exhaust Throttling on HCCI - Alternative Way to Control EGR and In-Cylinder Flow
Marcin Frackowiak et al.
SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2009)
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
A. Felix Regin et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2008)
Screening of high melting point phase change materials (PCM) in solar thermal concentrating technology based on CLFR
A Hoshi et al.
SOLAR ENERGY (2005)
Transient behaviour of an electrically heated catalytic converter on a motorcycle engine in cold start conditions
RF Horng et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2003)
Reaction of the electrically-heated catalyst of a four-stroke motorcycle engine under cold-start conditions with additional enrichment of the intake mixture
RF Horng et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2003)