☆ 4.7 Article

Investigations of cavitation erosion and wear resistance of cermet coatings manufactured by HVOF spraying

APPLIED SURFACE SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Effect of Microstructure and Hardness on Cavitation Erosion and Dry Sliding Wear of HVOF Deposited CoNiCrAlY, NiCoCrAlY and NiCrMoNbTa Coatings

Miroslaw Szala et al.

Summary: Metallic coatings based on cobalt and nickel show promise in extending the lifespan of machine components in harsh environments. However, there is a lack of research on the tribological and cavitation erosion performance of popular MCrAlY and NiCrMoNbTa coatings. This study comparatively investigates the effects of microstructure and hardness of different coatings on their performance. The results show that the resistance to sliding wear and cavitation erosion increases in the order of NiCoCrAlY < CoNiCrAlY < NiCrMoNbTa. The differences in microstructure affect the wear and cavitation erosion performance more than the hardness itself.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dry sliding wear behaviour of AZ31 magnesium alloy strengthened by nanoscale SiCp

Mingjie Shen et al.

Summary: This study investigates the wear and friction behavior of nanoscale SiCp reinforced Mg composite. The results show that SiCp effectively blocks grain growth and improves the mechanical properties and wear resistance of the composite. The wear rate of the composite increases gradually with the increase of sliding speed and load.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Review Materials Science, Coatings & Films

Advances in Thermally Sprayed WC-Based Wear-Resistant Coatings: Co-free Binders, Processing Routes and Tribological Behavior

Kaveh Torkashvand et al.

Summary: This paper reviews the recent developments in thermally sprayed tungsten carbide-based coatings, with a focus on alternative binders, processing routes, and the tribological behavior of the coatings. It also compares and analyzes different thermal spray methods.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation on the microstructure, tribological performance and corrosion resistance of Ni-Mo coatings deposited by HVOF and APS methods

Kang Yang et al.

Summary: Ni-Mo alloy coatings were deposited using HVOF and APS technologies, and the merits and demerits of the two processes were compared based on microstructure, mechanical properties, tribological performance, and corrosion resistance. Results showed that the HVOF coating had a more uniform and dense microstructure, lower wear rate, and better corrosion resistance compared to the APS coating, which had higher porosity and lower microhardness.

VACUUM (2022)

添加到收藏夹

Article Engineering, Mechanical

Investigation into microstructure and mechanical properties effects on sliding wear and cavitation erosion of Al2O3-TiO2 coatings sprayed by APS, SPS and S-HVOF

Monika Nowakowska et al.

Summary: This study investigated the influence of different thermal spray processes and spray feedstock characteristics on the properties of Al2O3-TiO2 coatings. The results showed that increasing hardness, Young's modulus, and the content of α-Al2O3 phase in the coating can decrease the sliding wear rate. Additionally, dense microstructures with high hardness and an increased content of α-Al2O3 phase favored the resistance of coatings to cavitation erosion.

WEAR (2022)

添加到收藏夹

Article Engineering, Industrial

Dry sliding, slurry abrasion and cavitation erosion of composite layers reinforced by TiC fabricated in situ in cast steel and gray cast iron

L. Szymanski et al.

Summary: TiC/Fe-type composite layers with improved wear resistance were successfully fabricated using reactive casting coatings. The composite layers exhibited higher hardness, lower weight loss, and resistance to cavitation erosion.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying

Lei Qiao et al.

Summary: The study found that the WC-CoCr coating exhibited the highest microhardness and the best abrasive wear resistance. Increasing applied load or sediment concentration led to higher wear rates for all coatings.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Comparative Analysis of Mechanical Properties of WC-Based Cermet Coatings Sprayed by HVOF onto AZ31 Magnesium Alloy Substrates

Ewa Jonda et al.

Summary: Magnesium alloys are interesting engineering materials due to their high strength to density ratio, but limited by low hardness and resistance to erosion, abrasion, and corrosion. Coating deposition and thermal spraying are proposed to improve mechanical performance. Coatings with different binders and additives were studied, showing that cobalt matrix coatings exhibit higher hardness, Young modulus, and fracture toughness compared to nickel matrix ones.

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental investigation and study of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2-25NiCr coating on its sliding wear behaviour

Tribhuwan Kishore Mishra et al.

Summary: This study conducted experimental and comparative investigations on HVOF sprayed coatings under different loads, with the WC-12Co coating showing the best sliding wear resistance and microhardness. The results suggest that the stability of the transfer layer plays a significant role in stable wear, with various aspects and mechanisms of improvements discussed in the paper.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of micro Ti particles on resistance to cavitation erosion of Mg-xTi composites

Alicja Krella et al.

Summary: The study on magnesium-titanium composites showed an increase in porosity with the content of titanium particles and degradation was caused by cracks at the interface.

MECHANICS OF MATERIALS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Microstructure and cavitation erosion behavior of HVOF sprayed ceramic-metal composite coatings for application in hydro-turbines

Sheng Hong et al.

Summary: In this study, Cr3C2-NiCr and WC-CoCr ceramic-metal coatings were produced using HVOF spraying. It was found that WC-CoCr coatings had higher microhardness and lower porosity compared to Cr3C2-NiCr coatings, resulting in lower cavitation erosion rates. The cavitation erosion mechanisms of the coatings varied at different flow velocities, with Cr3C2-NiCr coatings experiencing removal of chromium carbide particles, crater coalescence, and coating detachment, while WC-CoCr coatings were eroded at the binder phase, cavitation pits interlinked, and WC particles detached at different flow velocities.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Influence of 13 wt% TiO2 content in alumina-titania powders on microstructure, sliding wear and cavitation erosion resistance of APS sprayed coatings

Leszek Latka et al.

Summary: The addition of TiO2 in the powder provides denser microstructure of the coating, improves the contact between splats, prevents severe fragmentation and spallation during wear, and prolongs cavitation lifetime. Generally, AT0 coatings exhibit slightly better wear resistance than AT13 equivalents. However, AT13 coatings present superior cavitation erosion resistance when compared with AT0.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Erosive wear characteristics of high-chromium based multi-component white cast irons

Riki Hendra Purba et al.

Summary: The research found that the quenched specimens have better erosive wear resistance, but the tempering process slightly reduces their performance. This indicates that excessive Cr addition has a negative impact on erosive wear resistance in heat-treated conditions.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Thermally sprayed coatings for protection of integrated sensor systems on tribological loaded surfaces

Annett Dorner-Reisel et al.

Summary: The integration of piezo-elements in WC-NiCr and Cr3C2-NiCr thermally sprayed coatings produced electric voltage curves that can indicate wear and friction conditions. WC-NiCr coatings showed slightly higher electrical energy outcome under dry sliding, while Cr3C2-NiCr coatings demonstrated better wear resistance at higher temperatures.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Comparison of Different Cermet Coatings Sprayed on Magnesium Alloy by HVOF

Ewa Jonda et al.

Summary: In this study, two different cermet coatings, WC-CrC-Ni and Cr3C2-NiCr, were compared in terms of microstructure features and selected mechanical properties. It was found that WC content influenced hardness and wear resistance, with WC coatings exhibiting lower fracture toughness.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of Nitrogen Ion Implantation on the Cavitation Erosion Resistance and Cobalt-Based Solid Solution Phase Transformations of HIPed Stellite 6

Miroslaw Szala et al.

Summary: This study investigated the improvement of resistance to cavitation erosion through nitrogen ion implantation of HIPed Stellite 6, which showed enhanced performance compared to the unimplanted alloy. The ion implanted alloy exhibited higher resistance to cavitation erosion due to cobalt-rich matrix phase transformations and stabilization of carbides.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Factors Influencing Cavitation Erosion of NiCrSiB Hardfacings Deposited by Oxy-Acetylene Powder Welding on Grey Cast Iron

Miroslaw Szala et al.

Summary: The study demonstrated the cavitation erosion resistance of two NiCrSiB self-fluxing powders on cast iron substrate. Results showed that hardfacings have higher cavitation erosion resistance and can be applied to increase durability of cast iron machine components.

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Tribo-performance analysis of HVOF sprayed 86WC-10Co4Cr & Ni-Cr2O3 on AISI 316L steel using DOE-ANN methodology

Jashanpreet Singh

Summary: This study investigated the erosion wear of HVOF-sprayed 86WC-10Co4Cr and Synergistic Ni/Chromia powders, finding that 86WC-10Co4Cr displayed better erosion wear resistance compared to Ni/Chromia. Erosion wear was found to increase with time duration, solid concentration, and time, with erosion caused by ashes being lower than that caused by sand. These results have practical implications for slurry pumps in mining industry and thermal power plants.

INDUSTRIAL LUBRICATION AND TRIBOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Comparative study on the cavitation erosion behavior of two different rolling surfaces on 304 stainless steel

Z. X. Li et al.

Summary: The study compared the cavitation erosion behavior of 304 stainless steel in salt water on the rolling surface and longitudinal section, finding that the rolling surface exhibited better resistance to cavitation erosion and improved corrosion resistance and repassivation performance. The morphology evolution and protection capability of passive films on different rolling surfaces were also discussed.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Cavitation erosion resistant nickel-based cermet coatings for monel K-500

Navneet K. Singh et al.

Summary: WC-NiCr and WC-Hastelloy C coatings were deposited on Monel K-500 substrate using HVOF-spray to enhance the cavitation erosion resistance of the alloy. Both coatings reduced the erosion volume loss of the alloy, with WC-NiCr showing a superior performance due to its better combination of microhardness and fracture toughness. The cavitation erosion in the coatings was characterized by the formation of craters, cavities, and debonding of splats, while microplastic tearing and microcracks were observed as the primary erosion mechanism in Monel K-500.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Effect of counter faces on sliding wear behavior of WC-Cr3C2-Ni composite coating deposited by high velocity oxy fuel

Digvijay G. Bhosale et al.

Summary: The study investigated the effects of different counter faces on WC-Cr3C2-Ni composite coatings deposited by HVOF technique during dry sliding tests. The results showed that the tribo-pair formed by WC-Cr3C2-Ni coating with Si3N4 had the least coefficient of friction, while the wear of WC-Cr3C2-Ni coatings against Al2O3 ceramic counter balls was the most severe.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Performance Analysis of Cavitation Erosion Resistance and Corrosion Behavior of HVOF-Sprayed WC-10Co-4Cr, WC-12Co, and Cr3C2-NiCr Coatings

Ji Liu et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Impact of surface ultrasonic rolling on cavitation erosion behavior of 304 stainless steel

Chaoyong Li et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Acoustics

In-situ SEM observations of ultrasonic cavitation erosion behavior of HVOF-sprayed coatings

Haijun Zhang et al.

ULTRASONICS SONOCHEMISTRY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparative Study on the Cavitation Erosion and Sliding Wear of Cold-Sprayed Al/Al2O3and Cu/Al2O3Coatings, and Stainless Steel, Aluminium Alloy, Copper and Brass

Miroslaw Szala et al.

METALS (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Deposition and cavitation erosion behavior of multimodal WC-10Co4Cr coatings sprayed by HVOF

Xiang Ding et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and mechanical property of high velocity oxy-fuel sprayed WC-Cr3C2-Ni coatings

Hai-Long Yao et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Resistance of PVD Coatings to Erosive and Wear Processes: A Review

Alicja Krella

COATINGS (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Wear properties of WC-Co and WC-CoCr coatings applied by HVOF technique on different steel substrates

Hatice Varol Ozkavak et al.

MATERIALS TESTING (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructural, mechanical and tribological properties of finely grained Al2O3 coatings obtained by SPS and S-HVOF methods

Monika Michalak et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of flow velocity on cavitation erosion behavior of HVOF sprayed WC-10Ni and WC-20Cr3C2-7Ni coatings

Sheng Hong et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Tribological behavior of WC-Co HVAF-sprayed composite coatings modified by nano-sized TiC addition

H. Myalska et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cavitation Erosion and Sliding Wear Mechanisms of AlTiN and TiAlN Films Deposited on Stainless Steel Substrate

Miroslaw Szala et al.

COATINGS (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes

V Matikainen et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Cobalt Content on the Microstructure, Mechanical Properties and Cavitation Erosion Resistance of HVOF Sprayed Coatings

Ji Liu et al.

COATINGS (2019)

添加到收藏夹

Article Chemistry, Physical

Flame Spraying of Aluminum Coatings Reinforced with Particles of Carbonaceous Materials as an Alternative for Laser Cladding Technologies

Artur Czuprynski

MATERIALS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Study of the three-body impact abrasive wear behaviour of a low alloy steel reinforced with niobium

Erding Wen et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Engineering, Mechanical

Influence of cobalt content and HVOF deposition process on the cavitation erosion resistance of WC-Co coatings

Murilo S. Lamana et al.

WEAR (2018)

添加到收藏夹

Article Chemistry, Physical

Sliding wear behavior of nanostructured WC-Co-Cr coatings

Haibin Wang et al.

APPLIED SURFACE SCIENCE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Application of hardmetals as thermal spray coatings

Lutz-Michael Berger

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)

添加到收藏夹

Article Materials Science, Coatings & Films

Tribology of HVOF- and HVAF-sprayed WC-10Co4Cr hardmetal coatings: A comparative assessment

G. Bolelli et al.

SURFACE & COATINGS TECHNOLOGY (2015)

添加到收藏夹

Article Chemistry, Physical

Improvement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure

Ning Ma et al.

APPLIED SURFACE SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tribological Properties of WC-12Co Coating on AZ91 Magnesium Alloy Fabricated by High Velocity Oxy-Fuel Spray

F. Yildiz

HIGH TEMPERATURE MATERIALS AND PROCESSES (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructural characterisation and microhardness distribution of HVOF sprayed WC-10Co-4Cr coating

S. Hong et al.

SURFACE ENGINEERING (2014)

添加到收藏夹

Article Engineering, Mechanical

Comparative study of the dry sliding wear behaviour of HVOF-sprayed WC-(W,Cr)2C-Ni and WC-CoCr hardmetal coatings

Giovanni Bolelli et al.

WEAR (2014)

添加到收藏夹

Article Chemistry, Physical

Comparative investigation on HVOF sprayed carbide-based coatings

Mingxiang Xie et al.

APPLIED SURFACE SCIENCE (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings

L. Latka et al.

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

Article Engineering, Mechanical

Global energy consumption due to friction in paper machines

Kenneth Holmberg et al.

TRIBOLOGY INTERNATIONAL (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

The Instrumented Indentation Study of HVOF-Sprayed Hardmetal Coatings

Sarka Houdkova et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Mechanical

Cavitation and high-velocity slurry erosion resistance of welded Stellite 6 alloy

S. A. Romo et al.

TRIBOLOGY INTERNATIONAL (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cavitation erosion as a kind of dynamic damage

S. N. Buravova et al.

INTERNATIONAL JOURNAL OF FRACTURE (2011)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

Weight Loss with Magnesium Alloys

Tresa M. Pollock

SCIENCE (2010)

添加到收藏夹

Article Materials Science, Coatings & Films

Indentation size effect on mechanical properties of HVOF sprayed WC based cermet coatings for a roller cylinder

O. Culha et al.

SURFACE & COATINGS TECHNOLOGY (2009)

添加到收藏夹

Article Materials Science, Coatings & Films

Investigation of HVOF spraying on magnesium alloys

Maria Parco et al.

SURFACE & COATINGS TECHNOLOGY (2006)

添加到收藏夹

Article Engineering, Industrial

Mechanical and microstructural properties of HVOF sprayed WC-Co and Cr3C2-NiCr coatings on the boiler tube steels using LPG as the fuel gas

HS Sidhu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.