4.8 Article

Compatibility investigation and techno-economic performance optimization of whole geothermal power generation system

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Performance analysis of pinnate horizontal well in enhanced geothermal system

Jingxuan Xie et al.

Summary: In this study, a three-dimensional enhanced geothermal system (EGS) with pinnate horizontal well structure is proposed to improve the heat extraction performance. Numerical investigations show that the production temperature and total heat production of EGS with pinnate horizontal well increase significantly compared to conventional EGS with a doublet system. Design parameters such as main well bore number and length are positively correlated with heat extraction performance.

APPLIED THERMAL ENGINEERING (2022)

Article Thermodynamics

Comparative investigation on the heat extraction performance of an enhanced geothermal system with N2O, CO2 and H2O as working fluids

Feng Liu et al.

Summary: The heat extraction performances of N2O-EGS and CO2-EGS are almost the same under the same conditions, and better than H2O-EGS. A lower injection temperature is conducive to the heat extractions of N2O-EGS and CO2-EGS, while the production pressure, injection mass flow rate should be designed reasonably according to the actual situation.

APPLIED THERMAL ENGINEERING (2022)

Article Green & Sustainable Science & Technology

Geothermal exploitation and electricity generation from multibranch U-shaped well-enhanced geothermal system

Youcliang Liao et al.

Summary: A novel method is proposed for geothermal exploitation and electricity generation, with a focus on multibranch U-shaped well-enhanced geothermal systems. The efficiency and power generation rate of multibranch wells are significantly better than single branch wells, leading to a reduced levelized cost of energy. Sensitivity studies suggest that optimal water injection rate and horizontal wellbore length can minimize energy production costs.

RENEWABLE ENERGY (2021)

Article Energy & Fuels

Productivity prediction of a multilateral-well geothermal system based on a long short-term memory and multi-layer perceptron combinational neural network

Yu Shi et al.

Summary: Geothermal productivity prediction is crucial for managing geothermal systems. This study proposes a novel LSTM and MLP combinational neural network, which shows good accuracy and generalization ability in forecasting geothermal productivity.

APPLIED ENERGY (2021)

Article Energy & Fuels

Effects of lateral-well geometries on multilateral-well EGS performance based on a thermal-hydraulic-mechanical coupling model

Yu Shi et al.

Summary: The study shows that optimizing the geometrical parameters of lateral wells, such as length, spacing, and number, is crucial for enhancing the performance of multilateral-well EGS. Longer lateral wells and larger well spacing are beneficial for improving the EGS performance, while the number of wells should be optimized based on the specific discrete fracture network. The research provides valuable guidance for the design of lateral wells in multilateral-well EGS.

GEOTHERMICS (2021)

Article Energy & Fuels

Thermo-economic investigation of binary flashing cycle for enhanced geothermal system

Lingbao Wang et al.

Summary: This paper proposes the binary flashing cycle (BFC) technology for enhanced geothermal systems (EGS) and develops a detailed thermo-economic model. The study finds that greater geothermal well depth and brine flow rate improve system thermal performance, but may not always be beneficial for economic performance. The optimal depth and flow rate for minimum levelized energy cost are identified, along with the importance of operating parameters for economic benefits.

GEOTHERMICS (2021)

Article Energy & Fuels

Enhancing the performance of an integrated CCHP system including ORC, Kalina, and refrigeration cycles through employing TEG: 3E analysis and multi-criteria optimization

Farayi Musharavati et al.

Summary: The study conducted thermodynamic modeling, exergo-economic analysis, and multi-objective optimization of an integrated geothermal based CCHP system coupled with thermoelectric generator. The optimum conditions for the system were determined, and parametric study was performed to analyze different thermodynamic and economic criteria.

GEOTHERMICS (2021)

Article Thermodynamics

Response Surface Methodology to predict the performance and emission characteristics of gas-diesel engine working on producer gases of non-uniform calorific values

G. Arun Prasad et al.

Summary: Energy generation through gasification technology is receiving significant attention from policy makers and researchers. A mathematical investigation was conducted to analyze the impact of different biomass sources on the performance of a dual-fuel diesel engine. The study found that an increase in calorific value of producer gas led to higher CO and NOx emissions.

ENERGY (2021)

Article Energy & Fuels

Comparative study on heat extraction performance between gravity heat pipe system and enhanced geothermal system

Gang Liu et al.

Summary: The study found that the gravity heat pipe system has higher effective heat extraction ratio and compensation ratio in smaller reservoirs, while the enhanced geothermal system performs better in terms of heat extraction rate, cumulative heat extraction, and heat extraction ratio.

GEOTHERMICS (2021)

Article Agricultural Engineering

Comparison of response surface methodology (RSM) and artificial neural network (ANN) modelling for supercritical fluid extraction of phytochemicals from Terminalia chebula pulp and optimization using RSM coupled with desirability function (DF) and genetic algorithm (GA) and ANN with GA

Avinash Kumar Jha et al.

Summary: The study optimized the supercritical fluid extraction parameters for extracting phytochemicals from Terminalia chebula pulp, predicting responses using RSM and ANN, and using different optimization methods. The results showed that RSM was slightly better than ANN, and RSM-GA and RSM-DF provided higher values of TPC, TFC, and DPPH activity compared to ANN-GA.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Article Thermodynamics

Whole process analysis of geothermal exploitation and power generation from a depleted high-temperature gas reservoir by recycling CO2

Guodong Cui et al.

Summary: The geothermal resource in depleted high-temperature gas fields is abundant, and CO2 is more suitable to exploit geothermal energy from these gas fields due to its high mobility and thermal physical properties. However, all the related mechanisms, operation processes, and economic analyses have not been comprehensively analyzed yet.

ENERGY (2021)

Article Engineering, Environmental

Comparative exergy, multi-objective optimization, and extended environmental assessment of geothermal combined power and refrigeration systems

Farayi Musharavati et al.

Summary: This study conducted a comparative exergy analysis, multi-objective optimization, and extended environmental analysis of a geothermal-based power and refrigeration system. Configuration 3 showed the highest net output power and energy efficiency, but also had the highest environmental footprint.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Green & Sustainable Science & Technology

A thermo-hydro-mechanical model of a hot dry rock geothermal reservoir

Musa D. Aliyu et al.

Summary: This paper presents a new three-dimensional numerical model of a hot dry rock geothermal reservoir and analyzes two case studies to determine the impact of different factors on reservoir performance, showing that wellbore placement significantly affects reservoir performance.

RENEWABLE ENERGY (2021)

Article Green & Sustainable Science & Technology

Study on heat extraction considering the number and orientation of multilateral wells in a complex fractured geothermal reservoir

Xuefeng Gao et al.

Summary: Understanding flow and heat transfer in fractured geothermal reservoirs is crucial for the future development of enhanced geothermal systems (EGS). A thermal-hydraulic coupled model was proposed to evaluate heat extraction performance of multilateral wells in fractured reservoirs. Results showed minimal impact of increasing number of branch wells on production temperature but significant impact on well pressure.

RENEWABLE ENERGY (2021)

Article Thermodynamics

Thermoeconomic assessment of a geothermal based combined cooling, heating, and power system, integrated with a humidification-dehumidification desalination unit and an absorption heat transformer

Hamed Ghiasirad et al.

Summary: The study presents a novel multi-generation system utilizing 100% geothermal resource for power, cooling, heating, and desalination, evaluated from energy, exergy, and thermo-economic perspectives. The system achieves high heating/cooling potentials while reducing thermoeconomic indexes, with the highest amount of exergy destruction occurring in the absorption heat transformer and absorption chiller. Energy and exergy efficiencies show improvement with increasing ambient temperature and decreasing terminal temperature difference, leading to lower total system cost rate.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Thermodynamics

Comparative thermoeconomic analyses and multi-objective particle swarm optimization of geothermal combined cooling and power systems

Ali Habibollahzade et al.

Summary: Comparative parametric and multi-objective optimization analyses were conducted on three novel geothermal systems for combined cooling and power generation. Results show that each system has its own strengths and weaknesses in terms of power output, cooling capacity, thermal efficiency, and economic performance.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Geosciences, Multidisciplinary

Structural characterization of naturally fractured geothermal reservoirs in the central Upper Rhine Graben

Carole Glaas et al.

Summary: The study reveals that the permeable fracture zones in the geothermal reservoirs of Soultz-sous-Forets, Rittershoffen, and Illkirch are mainly concentrated in hard rocks, with the highest fracture densities and thicknesses in the first 500-1000 meters of the granite, reflecting the intensity of ancient circulations.

JOURNAL OF STRUCTURAL GEOLOGY (2021)

Article Green & Sustainable Science & Technology

Environmental, economic, and social impacts of geothermal energy systems

M. Soltani et al.

Summary: Geothermal energy, as a non-carbon renewable energy source, faces challenges such as high capital costs, resource location, and opposition from local communities in its deployment and development.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Water Resources

Modeling of multiphase mass and heat transfer in fractured high-enthalpy geothermal systems with advanced discrete fracture methodology

Yang Wang et al.

Summary: This study investigates multiphase flow in fractured geothermal reservoirs using numerical methods. A discrete-fracture model is used to describe the system, with the optimization of discretization resolution for accuracy and efficiency. The research findings contribute to providing necessary research methods for geothermal energy development.

ADVANCES IN WATER RESOURCES (2021)

Article Thermodynamics

Design of Electrical Submersible Pump system in geothermal wells: A case study from West Anatolia, Turkey

Hakki Aydin et al.

Summary: Geothermal energy is defined as one of the renewable and sustainable energy sources, and the sustainability of geothermal wells is highly dependent on the pressure drive mechanism and non-condensable gas content. Electrical Submersible Pumps (ESP) are a solution for extending the lifetime of geothermal wells. The study shows that ESP design can increase production rate of the well and make profit for at least 8 months.

ENERGY (2021)

Article Thermodynamics

Development and assessment of a novel geothermal power-based multigenerational system with hydrogen and ammonia production options

Yunus Emre Yuksel et al.

Summary: This study introduces a new geothermal energy-based multigeneration system that can produce electricity, fresh water, hot water, dry air, hydrogen, and ammonia. Through system analysis and performance evaluation, it is found that geothermal inlet conditions have the most significant impact on the energy and conversion performance of the entire plant.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Thermodynamics

The role of fracture networks randomness in thermal utilization of enhanced geothermal system

Jingxuan Xie et al.

Summary: This study uses supercritical carbon dioxide as the working fluid to establish three-dimensional fracture networks. It is found that the production performance is optimal when the fracture number is 200 and the fracture length is 100m.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Green & Sustainable Science & Technology

An integrated multi-objective optimization method to improve the performance of multilateral-well geothermal system

Guofeng Song et al.

Summary: This study optimized the geothermal development through an integrated approach, focusing on the injection flowrate, injection temperature, and production pressure for multi-objective optimization. The selected optimal combination of operational parameters led to a significant improvement in production performance.

RENEWABLE ENERGY (2021)

Article Thermodynamics

Exergoeconomic assessment and multiobjective optimization of a geothermal-based trigeneration system for electricity, cooling, and clean hydrogen production

Farayi Musharavati et al.

Summary: The study focuses on the performance evaluation and optimization of an advanced energy system with geothermal source, consisting of an organic Rankine cycle, an absorption chiller, and a low-temperature PEM electrolyzer. Energy is transferred through three stages to produce electricity and hydrogen for energy storage, with overall energy and exergy efficiency of 41% and 50%. Parametric study on various variables is conducted, and the best optimum state is determined through bi-objective optimization based on designer criteria.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Engineering, Environmental

Comparative life cycle assessment of geothermal power generation systems in China

Yongzhen Wang et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Article Thermodynamics

Comparison of production characteristics of various coaxial closed-loop geothermal systems

Gaosheng Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Review Green & Sustainable Science & Technology

Applications of geothermal organic Rankine Cycle for electricity production

A. Ahmadi et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Thermodynamics

Numerical evaluation of heat extraction for EGS with tree-shaped wells

Jie Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Energy & Fuels

Geothermal power generation in the world 2010-2014 update report

Ruggero Bertani

GEOTHERMICS (2016)

Article Energy & Fuels

Multi-branched horizontal wells for coalbed methane production: Field performance and well structure analysis

Jianhua Ren et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2014)

Article Engineering, Geological

A modeling approach for analysis of coupled multiphase fluid flow, heat transfer, and deformation in fractured porous rock

J Rutqvist et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2002)