4.7 Article

Recent advances in determination applications of emerging films based on nanomaterials

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Photocatalytic Cr(VI) reduction over MIL-88A(Fe) on polyurethane sponge: From batch to continuous-flow operation

Xiao-Hong Yi et al.

Summary: MIL-88A(Fe)@sponge (MS) was synthesized using a dip-coating method and demonstrated efficient photocatalytic Cr(VI) reduction under both low power LED UV light and real solar light irradiation. MS (0.2 g/L) in combination with 0.4 mmol/L tartaric acid (TA) achieved 100% removal of Cr(VI) (10 mg/L) within 6.0 min and 3.0 min under UV light and real solar light irradiation, respectively. Furthermore, the photo-induced e- and radicals (O2 center dot- and CO2 center dot -) were found to be vital in the MS/TA/UVL/Cr(VI) system. The results also demonstrated the long-term stability of MS in Cr(VI) reduction, making it a potentially efficient catalyst for large-scale wastewater treatment.

CHINESE CHEMICAL LETTERS (2023)

Review Chemistry, Multidisciplinary

Wearable Pressure Sensors for Pulse Wave Monitoring

Keyu Meng et al.

Summary: This study provides an overview of wearable pressure sensors for monitoring human pulse waves, focusing on the sensor mechanisms, microengineering structures, and applications in cardiovascular condition assessment. The study also discusses the opportunities and challenges faced by wearable pressure sensors, highlighting their potential as a wearable intelligent system for personalized healthcare.

ADVANCED MATERIALS (2022)

Article Chemistry, Analytical

Electrospun Nanofibrous Membrane-Based Colorimetric Device for Rapid and Simple Screening of Amphetamine-Type Stimulants in Drinks

Soojin Jang et al.

Summary: With the growth of drug-facilitated crimes, prevention has become increasingly important. A drug screening kit (DSK) has been developed for the simple and immediate detection of amphetamine-type stimulants (ATSs) in drinks. The color change of the DSK indicates the presence of ATSs, and the result can be confirmed by the naked eye without any analytical instrumentation.

ANALYTICAL CHEMISTRY (2022)

Article Biophysics

Fabricated Metal-Organic Frameworks (MOFs) as luminescent and electrochemical biosensors for cancer biomarkers detection

Brij Mohan et al.

Summary: The study focuses on the application of sensors made of porous metal-organic frameworks (MOFs) in cancer biomarker detection, analyzing factors such as fabrication strategies and structural properties that influence sensing performance, and proposes an innovative technique for detecting cancer biomarkers using luminescence and electrochemical sensors.

BIOSENSORS & BIOELECTRONICS (2022)

Article Engineering, Environmental

UV illumination-enhanced ultrasensitive ammonia gas sensor based on (001)TiO2/MXene heterostructure for food spoilage detection

Dongzhi Zhang et al.

Summary: The study introduces a method to design sensing materials by growing TiO2 on two-dimensional transition metal carbide to enhance the performance of ammonia sensors. With this design, the sensor shows 34 times higher sensitivity to ammonia, and the composite structure exhibits the highest affinity for adsorbing ammonia.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Chemistry, Multidisciplinary

Multi-Scale Nanoarchitectured Fibrous Networks for High-Performance, Self-Sterilization, and Recyclable Face Masks

Jian Xiong et al.

Summary: The study focuses on constructing nanoarchitectured nanofiber/carbon nanotube networks with high filtration efficiency, self-sterilization capabilities, and recyclability, offering a solution to reduce disease transmission, resource consumption, and environmental burdens.
Article Nanoscience & Nanotechnology

Nanoporous Ce-Based Metal-Organic Framework Nanoparticles for NO Sensing

JingWen Wang et al.

Summary: A nanoscale Ce-based metal-organic framework (CeMOF) biomimetic NO sensor with high sensitivity and wide detection range was prepared, and a CeMOF nanoparticle (NP) screen-printed electrode (SPE) chip was fabricated for monitoring NO released from living cells.

ACS APPLIED NANO MATERIALS (2022)

Article Chemistry, Multidisciplinary

Eco-Friendly Colorimetric Nanofiber Design: Halochromic Sensors with Tunable pH-Sensing Regime Based on 2-Ethyl-2-Oxazoline and 2-n-Butyl-2-Oxazoline Statistical Copolymers Functionalized with Alizarin Yellow R

Ella Schoolaert et al.

Summary: Colorimetric nanofibers with halochromic sensing functionality were developed using 2-n-butyl-2-oxazoline (B) and 2-ethyl-2-oxazoline (E) statistical copolymers as support platform. The sensors can detect aqueous solutions of different pH, (hydrochloric) acid and alkaline (ammonia) vapors, and biogenic amines with low detection limits. Tunability of sensor responsivity, sensitivity, and pKa can be achieved through manipulation of dye-polymer interactions and polymer structure.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Physical

Strategies, advances, and challenges associated with the use of graphene-based nanocomposites for electrochemical biosensors

Y. Veera Manohara Reddy et al.

Summary: Graphene, a unique carbon material, has attracted significant scientific interest in the fields of nanoscience and bionanotechnology. Its high specific surface area and good detection sensitivity make it an excellent material for the fabrication of electrochemical sensors. With the combination of graphene and other materials, highly sensitive and selective microdevices can be created.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2022)

Article Biophysics

Detection of prostate specific antigen in whole blood by microfluidic chip integrated with dielectrophoretic separation and electrochemical sensing

Xiaoli Wang et al.

Summary: This paper proposes a microfluidic chip integrated with DEP separation, electrochemical nanoprobes binding, and DPV detection for sensitive and rapid detection of PSA in whole blood. The chip demonstrates high efficiency in cell separation and PSA detection, and achieves excellent performance in quantitative detection of PSA.

BIOSENSORS & BIOELECTRONICS (2022)

Article Biophysics

Wearable sensors made with solution-blow spinning poly(lactic acid) for non-enzymatic pesticide detection in agriculture and food safety

Rafaella T. Paschoalin et al.

Summary: This paper presents a wearable non-enzymatic electrochemical sensor for the detection of pesticides on the surface of agricultural and food samples. The sensor is low-cost and non-destructive, making it a promising tool for precision agriculture.

BIOSENSORS & BIOELECTRONICS (2022)

Article Chemistry, Applied

A ratiometric fluorescent sensing system for the selective and ultrasensitive detection of pesticide residues via the synergetic effects of copper nanoclusters and carbon quantum dots

Ling Chen et al.

Summary: A ratiometric fluorescent sensing system based on carbon quantum dots and copper nanoclusters was developed for rapid and selective detection of pesticides in agricultural products. Smartphone-based colorimetric analysis enabled fast and visual detection of thiram and paraquat.

FOOD CHEMISTRY (2022)

Article Chemistry, Applied

Tailored construction of one-dimensional TiO2/Au nanofibers: Validation of an analytical assay for detection of diphenylamine in food samples

Thangavelu Kokulnathan et al.

Summary: A one-dimensional titanium dioxide encapsulated with gold heterojunction nanofibers was successfully synthesized and applied as robust electrocatalysts for the detection of diphenylamine, showing enhanced detection activity. The modified electrode also exhibited good selectivity towards the electrochemical oxidation of DPA and proved effective in detecting the effect of DPA on spiked content in food samples.

FOOD CHEMISTRY (2022)

Article Engineering, Environmental

Fly-antennae-inspired biomass-based fluorescent platform for NH3 quantitative detection and visual real-time monitoring of seafood spoilage

Lijuan Chen et al.

Summary: This study presents the development of a solid-state fluorescent platform for quantitative detection of NH3 and real-time monitoring of seafood spoilage. By combining biomass-based materials and aggregation-induced emission (AIE) fluorescence probes, the platform offers high sensitivity, easy-to-use features, and low cost. The system can be visualized using a smartphone.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Chemistry, Analytical

Synthesis, characterization and mechanism of electrospun carbon nanofibers decorated with ZnO nanoparticles for flexible ammonia gas sensors at room temperature

Shu Xing Fan et al.

Summary: A flexible gas sensor based on ZnO nanoparticles decorated carbon nanofibers (ZnO@CNF) was successfully fabricated and analyzed for its structure and performance. The sensor exhibited high response and selectivity to ammonia at room temperature, along with flexibility. This suggests that the sensor could be a potential candidate for detecting ammonia in the exhaled gas of patients with gastrointestinal or kidney diseases in the future.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Review Chemistry, Multidisciplinary

Multimodal Sensors with Decoupled Sensing Mechanisms

Ruoxi Yang et al.

Summary: This article introduces the emerging highly sensitive and multimodal sensors for various applications in epidermal electronics, robotics, health monitoring devices, and human-machine interfaces. It emphasizes the importance of material selection and sensor structure design in decoupling sensing mechanisms, and discusses methods to decouple different input signals for truly multimodal sensors, as well as strategies for interference suppression and signal correction.

ADVANCED SCIENCE (2022)

Article Nanoscience & Nanotechnology

Moisture-resistant, stretchable NOx gas sensors based on laser-induced graphene for environmental monitoring and breath analysis

Li Yang et al.

Summary: This study presents the design and demonstration of a moisture-resistant, stretchable NOx gas sensor based on laser-induced graphene (LIG). The gas sensor exhibits a large response, an ultralow detection limit, fast response/recovery, and excellent selectivity. It can be stretched by 30% and has been demonstrated to monitor the personal local environment and analyze human breath samples for disease diagnostics.

MICROSYSTEMS & NANOENGINEERING (2022)

Article Chemistry, Multidisciplinary

Humidity-Independent Artificial Olfactory Array Enabled by Hydrophobic Core-Shell Dye/MOFs@COFs Composites for Plant Disease Diagnosis

Xiao Wang et al.

Summary: This study developed a core-shell dye/MOFs@COFs gas-sensing material with excellent humidity resistance and sub-ppm level sensitivity, which is applicable for early and accurate detection of wheat scab.

ACS NANO (2022)

Article Chemistry, Physical

Metal-organic framework (MOF) composites as promising materials for energy storage applications

Yi Peng et al.

Summary: Metal-organic framework (MOF) composites are considered important energy storage materials due to their high porousness, multifunction, various structures, and controllable chemical compositions, but they still face challenges and difficulties in batteries and supercapacitors.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2022)

Article Biophysics

Silicon nanowires-based biosensors for the electrical detection of Escherichia coli

Yousra Benserhir et al.

Summary: This study developed a highly sensitive bacterial sensor based on networks of silicon nanowires for the detection of Escherichia coli. The sensor utilizes the interaction between bacteria and the nanowires to achieve detection. The high specificity of the sensor is achieved through chemical functionalization of the nanowires. This sensor is highly sensitive, low-cost, and compatible with traditional silicon technology, making it a potential alternative tool for real-time bacterial detection.

BIOSENSORS & BIOELECTRONICS (2022)

Article Biophysics

Portable and durable sensor based on porous MOFs hybrid sponge for fluorescent-visual detection of organophosphorus pesticide

Lin Zhang et al.

Summary: Pesticide residues have caused public concern, and metal-organic frameworks have been used as recognition and signal generation elements in pesticide detection sensors. A sensor based on porous MOFs hybrid sponge for fluorescent-visible detection of methyl parathion has been developed, showing rapid response time, wide linear detection range, and low detection limit.

BIOSENSORS & BIOELECTRONICS (2022)

Article Engineering, Environmental

An artificial olfactory sensor based on flexible metal-organic frameworks for sensing VOCs

Huayun Chen et al.

Summary: Flexible metal-organic framework (MOF) sensor allows high selectivity detection of VOCs and exhibits excellent reversibility and storage stability. It also shows potential in identifying plant diseases caused by pathogen infection.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Multidisciplinary

Heterojunction MnO2-nanosheet-decorated Ag nanowires with enhanced oxidase-like activity for the sensitive dual-mode detection of glutathione

Lin Tian et al.

Summary: A biomimetic enzyme-triggered dual-mode system was constructed using Ag@MnO2 nanomaterials as oxidase-like nanozyme, enabling the preparation of nanomaterials with high catalytic activity in tumor cells (pH 6.0-6.5). A portable dual-mode colorimetry and photothermal method was developed for detecting glutathione, showing a wide linear range and low detection limit.

NANOSCALE (2022)

Review Chemistry, Multidisciplinary

Construction and application of base-stable MOFs: a critical review

Kecheng Wang et al.

Summary: Metal-organic frameworks (MOFs) are porous crystalline materials made up of organic ligands and metal ions/clusters. Their unique advantages have attracted increasing attention in recent years, showing great potential in various applications. In alkaline operational environments, the stability of MOFs against bases is crucial for achieving high performance and long cycling life. Therefore, the development of base-stable MOFs has become a critical research direction in this field.

CHEMICAL SOCIETY REVIEWS (2022)

Review Chemistry, Physical

Hierarchical assemblies of molecular frameworks-MOF-on-MOF epitaxial heterostructures

Ritesh Haldar et al.

Summary: Functional, porous metal-organic frameworks (MOFs) are a flexible and diverse class of crystalline, porous materials that have attracted attention for advanced applications. Hierarchical assemblies and creation of MOF/MOF heterointerfaces are important for exploiting photophysical properties. Layer-by-layer (lbl) methods offer advantages in manufacturing superstructures with length scales beyond the MOF pore size, allowing for extended isoreticular approach and compositional diversity in MOFs.

NANO RESEARCH (2021)

Article Engineering, Environmental

Construction of MOF-based superhydrophobic composite coating with excellent abrasion resistance and durability for self-cleaning, corrosion resistance, anti-icing, and loading-increasing research

Huaiyin Chen et al.

Summary: A superhydrophobic composite coating was developed based on MOF nanoparticles and organic resin, showing high water-repellency, mechanical and chemical robustness. It also exhibited excellent performance in self-cleaning, corrosion resistance, anti-icing, and loading-increasing applications. The coating could significantly increase the impedance modulus of Q235 steel in corrosive environments, demonstrating its potential for various practical applications.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Chemistry, Inorganic & Nuclear

Metal-organic framework-derived nanomaterials in environment related fields: Fundamentals, properties and applications

Yangzhuo He et al.

Summary: Metal-organic frameworks (MOFs) are a new class of crystalline porous materials composed of metal nodes and organic linkers, which have been widely used as versatile precursors in the preparation of various nanomaterials. The advantages of MOF-derived nanomaterials, such as controllable composition and high porosity, make them highly potential in environmental applications. This article summarizes the fundamental properties of these nanomaterials, highlights the strategies for enhancing performance, and discusses their recent progress in environmental cleaning and monitoring.

COORDINATION CHEMISTRY REVIEWS (2021)

Article Nanoscience & Nanotechnology

Nonenzymatic Saliva-Range Glucose Sensing Using Electrodeposited Cuprous Oxide Nanocubes on a Graphene Strip

Wenyu Gao et al.

Summary: Cuprous oxide (Cu2O) nanocubes deposited on conductive graphene strips provide a high-performance nonenzymatic glucose sensor with a wide detection range and high sensitivity suitable for saliva-range glucose sensing. The combination of Cu2O nanocubes' catalytic properties, large specific surface area, and active sites with graphene's high conductivity makes this sensor one of the best reported for saliva-range glucose detection.

ACS APPLIED NANO MATERIALS (2021)

Article Nanoscience & Nanotechnology

pH-Responsive Dual-Emitting Hydroxypropyl Methylcellulose-Based Material Containing Fluorescein Isothiocyanate and CaAl2O4:Eu2+,Dy3+ Phosphors

Yijun Yao et al.

Summary: In this study, a dual-emitting cellulose film with pH response was prepared, showcasing high transparency, flexibility, and thermal stability. The film can emit cyan light continuously under different pH values and exhibit strong fluorescence intensity under exceedingly alkaline conditions.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Wearable Pressure Sensors Based on MXene/Tissue Papers for Wireless Human Health Monitoring

Li Yang et al.

Summary: The study demonstrates a novel flexible paper-based pressure sensing platform with high sensitivity, low detection limit, broad detection range, and excellent stability. The sensor can be used to monitor physiological signals, human movements, and recognize spatial pressure distribution.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Multidisciplinary

Physical and Chemical Sensors on the Basis of Laser-Induced Graphene: Mechanisms, Applications, and Perspectives

Junbo Zhu et al.

Summary: Laser-induced graphene (LIG) is a rapidly produced, environmentally friendly material with a three-dimensional porous structure, widely utilized in sensors. However, there is still a lack of systematic review on its synthesis, sensing mechanisms, and applications.

ACS NANO (2021)

Review Nanoscience & Nanotechnology

Beyond the Single-Nozzle: Coaxial Electrospinning Enables Innovative Nanofiber Chemistries, Geometries, and Applications

Prerana Rathore et al.

Summary: Electrospinning is increasingly popular for producing fibrous assemblies with high surface area, and coaxial electrospinning has emerged as a modified version to address limitations of traditional methods. This review discusses the mechanism of coaxial electrospinning, operational parameters for fabricating continuous fibers, and modifications to improve fiber properties. Examples of diverse applications and current limitations of coaxial electrospinning are also included for discussion.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Biophysics

Laser-induced graphene non-enzymatic glucose sensors for on-body measurements

Jia Zhu et al.

Summary: The study highlights the superiority of non-enzymatic glucose sensors in terms of sensitivity and linear range, as well as their potential practical applications in sweat sampling and glucose sensing.

BIOSENSORS & BIOELECTRONICS (2021)

Review Chemistry, Inorganic & Nuclear

Synthesis and application of metal-organic framework films

Xinyue Shi et al.

Summary: Metal-organic frameworks (MOFs) are crystalline porous materials with various applications in the field of chemistry; This article summarizes preparation methods of MOF films and their applications in multiple fields; Future research needs to address challenges to advance developments in synthesis and applications.

COORDINATION CHEMISTRY REVIEWS (2021)

Article Chemistry, Physical

Fast cathodic reduction electrodeposition of a binder-free cobalt- doped Ni-MOF film for directly sensing of levofloxacin

Yafeng Jin et al.

Summary: A binder-free Co/Ni-MOF film was electrodeposited on a glassy carbon electrode to improve the performance of an electrochemical sensor. The sensor showed a wider linear range, lower detection limit, and higher sensitivity for levofloxacin detection, with satisfactory recoveries in eye drops and spiked milk. This work developed an efficient strategy for the synthesis of Co and Ni-based MOF films and demonstrated their potential in electrochemical applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Multidisciplinary

Preparation of PEO-based Cu2O/Bi2O2CO3 electrospun fibrous membrane toward enhanced photocatalytic degradation of chloramphenicol

Qinqing Wang et al.

Summary: Novel p-n heterojunction of Cu2O/Bi2O2CO3 photocatalysts were synthesized and combined with electrospinning and electron beam irradiation methods to improve visible-light absorption and photocatalytic activity, showing significant degradation efficiency for CAP with the generation of cytotoxic intermediates. Moreover, the obtained materials exhibited notable inhibition against Escherichia coli and Staphylococcus aureus.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Chemistry, Applied

MXene@Ag-based ratiometric electrochemical sensing strategy for effective detection of carbendazim in vegetable samples

Wei Zhong et al.

Summary: In this study, a novel ratiometric electrochemical sensor for carbendazim detection was developed using a composite of MXene@Ag nanoclusters and amino-functionalized multi-walled carbon nanotubes. The sensor exhibited a favorable linear relationship and low detection limit, with high selectivity, good reproducibility, stability, and applicability in vegetable samples.

FOOD CHEMISTRY (2021)

Article Chemistry, Applied

Membrane-protected covalent organic framework fiber for direct immersion solid-phase microextraction of 17beta-estradiol in milk

Zhenglian Mo et al.

Summary: The study developed a method for detecting trace E2 in milk samples using COFLZU1 and Nafion coated stainless steel wire for SPME fiber preparation. The stability of the SPME fiber was improved with the protection of dialysis membrane, resulting in only 7% reduction in extraction efficiency after 160 repeated uses.

FOOD CHEMISTRY (2021)

Article Chemistry, Analytical

PANI nanofibers-supported Nb2CTx nanosheets-enabled selective NH3 detection driven by TENG at room temperature

Si Wang et al.

Summary: A selective NH3 sensor based on Nb2CTx nanosheets driven by a TENG for enhanced sensing response has been proposed. Gas sensing properties can be optimized by regulating the spray volume of Nb2CTx nanosheets. Results show that the gas sensing response of Nb2CTx/PANI-2 sensor has been significantly improved, even under high humidity conditions.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Designing an intelligent nanofiber ratiometric fluorescent sensor sensitive to biogenic amines for detecting the freshness of shrimp and pork

Zongyan Quan et al.

Summary: The novel intelligent nanofiber ratiometric fluorescent sensor BAsCNF has high sensitivity for detecting seafood freshness. It shows excellent response performance to biogenic amines, indicating high detection accuracy and broad application prospects.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Nanoscience & Nanotechnology

Electrospinning of Flexible Poly(vinyl alcohol)/MXene Nanofiber-Based Humidity Sensor Self-Powered by Monolayer Molybdenum Diselenide Piezoelectric Nanogenerator

Dongyue Wang et al.

Summary: A self-powered flexible humidity sensor integrated with PVA/MXene nanofibers film and MoSe2 PENG technology was reported in this study. The sensor exhibits high response rate, fast response/recovery time, low hysteresis, and excellent repeatability, making it suitable for detecting human skin moisture and ambient humidity.

NANO-MICRO LETTERS (2021)

Article Chemistry, Multidisciplinary

Zirconium-Based Metal-Organic Framework Particle Films for Visible-Light-Driven Efficient Photoreduction of CO2

Pei-Xian Li et al.

Summary: This study successfully prepared MOF films for photocatalytic CO2 reduction, achieving good photocatalytic activity and reusability. By measuring photocurrent response and electrochemical impedance spectroscopy of the PET@NH2-UiO-66 film, it was confirmed that the electron-hole pairs in the film separate rapidly.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Breathable Nanogenerators for an On-Plant Self-Powered Sustainable Agriculture System

Lingyi Lan et al.

Summary: The article introduces a waterproof and breathable triboelectric nanogenerator that can self-attach to plant leaves and harvest environmental energy from wind and raindrops. This generator can serve as a sustainable power supply for plant sensors, enabling real-time monitoring of plant health status.

ACS NANO (2021)

Article Chemistry, Analytical

Identification and Detection of Volatile Aldehydes as Lung Cancer Biomarkers by Vapor Generation Combined with Paper-Based Thin-Film Microextraction

Zhaoping Xia et al.

Summary: The study introduces a novel smart vapor generation paper-based thin-film microextraction system for accurate and sensitive on-spot screening of volatile benzaldehyde. The system utilizes core-shell gold nanorod quantum dot-embedded metal-organic framework structures to achieve fluorescence detection and surface-enhanced Raman spectroscopy quantification of the biomarker. Results demonstrate high accuracy and sensitivity in detecting volatile benzaldehyde.

ANALYTICAL CHEMISTRY (2021)

Article Chemistry, Physical

Highly porous poly(L-lactic) acid nanofibers as a dual-signal paper-based bioassay platform for in vitro diagnostics

Fang Ma et al.

Summary: A portable, low-cost, and sensitive biosensor is created with a highly porous poly(L-lactic) acid nanofiber membrane (p-PLLA) for biomarker detection, utilizing a sensitivity-enhancing strategy and a sandwich immunoreaction approach. This bioassay shows excellent convenience and a high sensitivity when applied to the liver cancer marker (alpha-fetoprotein) as a model analyte, with a color mutation point set at 10 ng mL(-1) and a limit of detection at 0.17 pg mL(-1), indicating promising applications for cancer biomarker screening and point-of-care diagnostics.

APPLIED SURFACE SCIENCE (2021)

Article Engineering, Environmental

Metal-organic framework membranes: Recent development in the synthesis strategies and their application in oil-water separation

Yuying Deng et al.

Summary: Metal organic frameworks (MOFs) have attracted increasing attention for their large specific surface area and good thermal and chemical stability. Researchers have focused on the preparation of MOF membranes based on the excellent properties of MOFs, which have been widely used in separation, catalysis, and water treatment fields. MOF membranes show excellent separation performance in gas separation, oil-water separation, among other applications.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Applied

GO film on flexible substrate: An approach to wearable colorimetric humidity sensor

Hong Chi et al.

Summary: The study fabricated a colorimetric humidity sensor based on graphene oxide thin film on different substrates using dip coating technique. Results showed that graphene oxide film on metallized polyethylene terephthalate displayed enhanced performance when fabricated from acetone dispersion compared to aqueous dispersion. The wetting property of the solvent played a crucial role in forming uniform d-spacing of graphene oxide sheets.

DYES AND PIGMENTS (2021)

Article Chemistry, Applied

Design and in situ synthesis of ZnInS@ZIF-8-nanofilms multifunctional nanocomposite: A case application for simultaneous fluorescent sensing and enhanced photocatalytic performance toward antibiotic

Yuan Gao et al.

Summary: The study introduces a novel in-situ self-assembled multifunctional semiconductor@2D-c-MOF platform for simultaneous fluorescent detection and photocatalysis, achieving high efficiency and sensitive detection. The platform could potentially open up a new perspective for advanced photocatalyst development in the future.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Review Chemistry, Multidisciplinary

Applications of MOFs as Luminescent Sensors for Environmental Pollutants

Guo-Li Yang et al.

Summary: Environmental pollution poses serious health risks and requires the urgent detection of pollutants for protection. Luminescent metal-organic frameworks (LMOFs) with tunable structures have shown excellent performance as sensors for detecting various environmental pollutants.
Article Spectroscopy

Flexible electrospun nanofibrous film integrated with fluorescent carbon dots for smartphone-based detection and cellular imaging application

Niloufar Amin et al.

Summary: A nanofiber-based sensing platform for sensitive and on-site doxorubicin detection was developed in this study. The sensor, which can be coupled with smartphone technology, showed potential for detecting intracellular DOX for enhancing cell proliferation, making it a multimodal tool in biomedical research and clinical diagnostics.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2021)

Article Multidisciplinary Sciences

Rapid electrochemical detection of coronavirus SARS-CoV-2

Thanyarat Chaibun et al.

Summary: The researchers developed an ultrasensitive electrochemical biosensor based on isothermal rolling circle amplification for rapid detection of SARS-CoV-2, capable of detecting as low as 1 copy/mu L of N and S genes in clinical samples. The sensor showed a 100% concordance with qRT-PCR results in clinical sample evaluation.

NATURE COMMUNICATIONS (2021)

Review Materials Science, Multidisciplinary

Recent Progress on Flexible Capacitive Pressure Sensors: From Design and Materials to Applications

Rishabh B. Mishra et al.

Summary: The revolutionary design and fabrication methods of flexible capacitive pressure sensors have greatly improved the field of flexible and wearable electronics. Mathematical modeling, finite element simulations, and unique fabrication strategies are utilized to create diverse shapes and functions for these sensors. By detecting changes in capacitance due to pressure-induced deformation, these sensors have found applications in various industries and have promising future prospects.

ADVANCED MATERIALS TECHNOLOGIES (2021)

Article Nanoscience & Nanotechnology

Ratiometric Antifouling Electrochemical Biosensors Based on Multifunctional Peptides and MXene Loaded with Au Nanoparticles and Methylene Blue

Yan Xu et al.

Summary: A universal strategy for constructing ratiometric antifouling electrochemical biosensors using multifunctional peptides and 2D nanomaterial MXene was developed. The biosensors possess high selectivity, accuracy, and sensitivity in complex samples, with the capability to easily detect other targets by changing the recognition sequence of the peptides.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Solvothermal Synthesis of High-Performance d10-MOFs with Hydrogel Membranes @ Turn-On Monitoring of Formaldehyde in Solution and Vapor Phase

Sourav Bej et al.

Summary: Two luminescent porous networks (CMERI-1 & CMERI-2) have been developed for efficient detection of formaldehyde (FA) in aqueous medium, with CMERI-1 showing better sensitivity and quicker response time due to facile imine formation. The detection limits of CMERI-1 & CMERI-2 for FA in water are below the intracellular concentration of formaldehyde, and a MOF-based hydrogel membrane for vapor-phase FA detection has been fabricated. The response mechanisms of MOFs are supported by density functional theory (DFT) and Fukui indices analysis, indicating their potential in real-world applications for food sample and water analyses.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Multidisciplinary

The Triboelectric Nanogenerator as an Innovative Technology toward Intelligent Sports

Jianjun Luo et al.

Summary: In the new era of the Internet-of-Things, the development of intelligent sports relies heavily on athletic big data collection and analysis using widely distributed sensing networks. The triboelectric nanogenerator (TENG) has shown great potential in overcoming limitations of conventional sensors with its mechanical energy harvesting and self-powered sensing technology, fabricated using common materials like wood and paper. Progress on TENG-based sports sensing systems, including smart sports facilities and wearable equipment, as well as the remaining challenges and open opportunities in the field of intelligent sports, are summarized.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Hg2--activated oxidase-like activity of Ag2S@graphene oxide nanozyme and its naked-eye monitoring Hg2+ application with obvious hyperchromic effect

Qi Zhao et al.

Summary: The combination of silver sulfide nanoparticles and graphene oxide enabled the naked-eye detection of toxic Hg2+ with high sensitivity and selectivity. The detection method showed a detection limit of 9.8 x 10(-9) mol/L, accurate recovery rates of 97.0-101.8%, and a low standard deviation of less than 3.3%.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Multifunctional poly(vinyl alcohol)/Ag nanofibers-based triboelectric nanogenerator for self-powered MXene/tungsten oxide nanohybrid NO2 gas sensor

Dongyue Wang et al.

Summary: In this paper, a PVA/Ag nanofibers-based TENG was developed for human respiration, movement, and harmful gas monitoring, achieving high voltage and power density outputs. By integrating a voltage regulator module, stable voltage output from the wind-driven TENG was achieved, providing a feasible solution for different wind conditions. A self-powered sensor system was developed by integrating TENGs and a gas sensor, offering a sustainable detection platform for tracking the source of harmful gases.

NANO ENERGY (2021)

Article Engineering, Environmental

A versatile logic detector and fluorescent film based on Eu-based MOF for swift detection of formaldehyde in solutions and gas phase

Huachao Che et al.

Summary: The study presents a versatile logic detector and a portable fluorescent film based on Eu-MOF for swift detection of formaldehyde in solutions and gas phase, respectively. It efficiently identifies formaldehyde in different concentration ranges and has the potential to improve human response level to formaldehyde.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Multidisciplinary

Hierarchically Microstructure-Bioinspired Flexible Piezoresistive Bioelectronics

Tao Yang et al.

Summary: The hierarchically microstructure-bioinspired piezoresistive sensor exhibits ultrahigh sensitivity, wide pressure detection range, fast response time, and can monitor human physiological signals and movement states successfully.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Pattern-Potential-Guided Growth of Textured Macromolecular Films on Graphene/High-Index Copper

Dikui Zhou et al.

Summary: The research demonstrates a successful method of growing textured macromolecular films on a designed graphene/high-index copper (Cu) surface, driven by a patterned potential from different charge transfer amounts between the graphene and Cu surfaces. The textured films show remarkable improvements in remnant ferroelectric polarization and fracture strength.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Cathodic Electrodeposition of MOF Films Using Hydrogen Peroxide

Sijie Xie et al.

Summary: This study introduces the use of hydrogen peroxide assisted cathodic deposition (HPACD) to prepare metal-organic framework (MOF) films, overcoming the limitations of metal co-deposition and narrow range of possible metal nodes. Various pure MOF films were successfully prepared, and effective rejection of Rose Bengal from water was achieved with flexible Cu-BTC coated paper membranes.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Biophysics

Flexible paper-based Ni-MOF composite/AuNPs/CNTs film electrode for HIV DNA detection

Qin Lu et al.

Summary: Developing a rapid, simple, low cost point-of-care method for early pathogen diagnosis is crucial. This study constructed a flexible paper-based electrode using Ni metal-organic framework and Au nanoparticles for detecting target HIV DNA. The CCP film electrode exhibited excellent sensing performance and stability, making it suitable for POC diagnosis of other pathogens.

BIOSENSORS & BIOELECTRONICS (2021)

Article Chemistry, Applied

A Schiff base-functionalized graphene quantum dot nanocomposite for preferable picric acid sensing

Yuting Fan et al.

Summary: This study presents a new sensor design mediated by graphene quantum dots for fast and effective detection of picric acid in water and air, showing higher fluorescent quantum yield and better selective detection capability. Luminescent Schiff-GQDs exhibit significant quenching effects, lower detection limits, and the ability to detect PA with the naked eye.

DYES AND PIGMENTS (2021)

Article Engineering, Environmental

Adsorption-improved MoSe2 nanosheet by heteroatom doping and its application for simultaneous detection and removal of mercury (II)

Caicheng Long et al.

Summary: Nitrogen and sulfur co-doped molybdenum selenide nanosheets were prepared for the simultaneous detection and removal of mercury (II) in water, showing good adsorption performance and stability. This study is expected to provide new materials for the treatment of heavy metal ions in water pollution.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature

Yanqiao Ding et al.

Summary: This study synthesized ternary MoS2-rGO-Cu2O composites with enhanced ppb-level NO2 sensing characteristics, achieving highest response to 500 ppb NO2 at room temperature compared to pure MoS2 and binary MG15. The synergy of shell-structure, mesoporous, heterojunction construction, and enhanced conductivity contributed to the improved sensing performance of the ternary sensor.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Materials Science, Multidisciplinary

Fabricating functional circuits on 3D freeform surfaces via intense pulsed light-induced zinc mass transfer

Ning Yi et al.

Summary: A new fabrication strategy for printing functional circuits directly onto 3D freeform surfaces has been proposed in this research, with the ability to transform transient devices into long-lasting devices. The viability of this technology in integrating sensors and wireless communication components was demonstrated on 3D glass beakers and seashells with complex surface geometries.

MATERIALS TODAY (2021)

Article Chemistry, Analytical

Ultrasound-assisted synthesis of barium tungstate encapsulated carbon nanofiber composite for real-time sensing of p-cresol in human urine samples

Periyasamy Sundaresan et al.

Summary: Barium tungstate-functionalized carbon nanofiber composite based electrochemical sensors were fabricated for the detection of p-Cresol in human urine samples. These sensors showed excellent selectivity and performance towards p-Cresol determination under optimal conditions, with a low detection limit and wide linear range. The prepared electrode was successfully applied for detecting p-Cresol levels in human urine samples.

MICROCHEMICAL JOURNAL (2021)

Article Chemistry, Applied

Polyphenylene sulfide paper-based sensor modified by Eu-MOF for efficient detection of Fe3+

Yan Yu et al.

Summary: The novel Eu-MOF@ALD-PPS sensor with excellent solvent resistant and thermal stability was successfully fabricated by modification of PPS non-woven fabric with ALD technology, providing high selectivity and sensitivity in detecting Fe3+ among various metal ions.

REACTIVE & FUNCTIONAL POLYMERS (2021)

Article Chemistry, Analytical

Development of a rapid and sensitive quantum dot nanobead-based double-antigen sandwich lateral flow immunoassay and its clinical performance for the detection of SARS-CoV-2 total antibodies

Yaofeng Zhou et al.

Summary: The study successfully developed highly luminescent quantum dot nanobeads for rapid and accurate measurement of total antibody concentrations in the population, which is crucial for combating the COVID-19 pandemic.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Materials Science, Composites

Piezoelectric PAN/BaTiO3 nanofiber membranes sensor for structural health monitoring of real-time damage detection in composite

Linjia Yuan et al.

Summary: A PAN/BaTiO3 piezoelectric nanofiber membrane sensor was developed for real-time damage detection in composites, showing good potential as a flexible reinforcement in composite materials for SHM applications. The sensor demonstrated improved mechanical-to-electrical output and interlaminated shear strength within the composite, with real-time monitoring capabilities for delamination failures during mechanical loading.

COMPOSITES COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

AuNP array coated substrate for sensitive and homogeneous SERS-immunoassay detection of human immunoglobulin G

Qi Qu et al.

Summary: In this study, a SERS-immunoassay method for the detection of human immunoglobulin G (HIgG) was developed, showing high sensitivity and a wide linear range. The method displayed excellent specificity and homogeneity, ensuring practical use in quantitative detection of HIgG in clinical diagnostics.

RSC ADVANCES (2021)

Article Materials Science, Biomaterials

Amine-functionalized Cu-MOF nanospheres towards label-free hepatitis B surface antigen electrochemical immunosensors

Muhammad Rezki et al.

Summary: Amine-functionalized Cu-MOF nanospheres were successfully synthesized and optimized for HBsAg detection. The immobilization of a bioreceptor allowed for accurate detection of the hepatitis B infection biomarker.

JOURNAL OF MATERIALS CHEMISTRY B (2021)

Article Materials Science, Multidisciplinary

Luminescence-colour-changing sensing toward neurological drug carbamazepine in water and biofluids based on white light-emitting CD/Ln-MOF/PVA test papers

Yuxin Li et al.

Summary: A luminescence-colour-changing sensing test paper has been designed to detect nanomolar levels of CBZ in water, urine, and serum, by anchoring yellow-light-emitting MOF-76 (Eu0.05Tb0.95) and blue-light-emitting carbon dots (CDs) on a polyvinyl alcohol (PVA) substrate. This white-light-emitting film (0.012CD/Eu0.05Tb0.95BTC/PVA) shows exceptional sensitivity towards CBZ and offers stability and advanced properties for practical application.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Review Materials Science, Multidisciplinary

Recent trends and perspectives in electrochemical sensors based on MOF-derived materials

Josue M. Goncalves et al.

Summary: Metal organic frameworks (MOFs) are hybrid materials with diverse applications potential, but the improvement in their electrochemical properties is needed for real-world applications. MOF-derived materials show great potential in constructing electrochemical sensors, possessing exceptional conductivity, electrochemical activity, and stability.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Engineering, Electrical & Electronic

Metal-Organic Framework-Based Flexible Devices with Simultaneous Electrochromic and Electrofluorochromic Functions

Jian Liu et al.

Summary: This study utilized redox-active metal-organic frameworks to develop a flexible device with both electrochromic and electrofluorochromic functions. The device demonstrated fast switching times and cycling stability, showing potential for applications in displays for portable and wearable consumer products.

ACS APPLIED ELECTRONIC MATERIALS (2021)

Article Chemistry, Analytical

High performance tube sensor based on PANI/Eu3+ nanofiber for low-volume NH3 detection

Wenqian Zhang et al.

ANALYTICA CHIMICA ACTA (2020)

Article Engineering, Electrical & Electronic

One-step fabrication of SnO2 porous nanofiber gas sensors for sub-ppm H2S detection

Phan Hong Phuoc et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

Article Nanoscience & Nanotechnology

Ultrathin Nanofibrous Membranes Containing Insulating Microbeads for Highly Sensitive Flexible Pressure Sensors

Taiyu Jin et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Environmental

Self-reduction bimetallic nanoparticles on ultrathin MXene nanosheets as functional platform for pesticide sensing

Fengnian Zhao et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Engineering, Environmental

Luminescent lanthanide metal-organic framework test strip for immediate detection of tetracycline antibiotics in water

Chongliang Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Chemistry, Analytical

Porphyrin nanofiber/single-walled carbon nanotube nanocomposite-based sensors for monitoring hydrogen peroxide vapor

Jae-Sung Lee et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Multidisciplinary Sciences

Super-tough MXene-functionalized graphene sheets

Tianzhu Zhou et al.

NATURE COMMUNICATIONS (2020)

Article Nanoscience & Nanotechnology

On-Chip Template-Directed Conversion of Metal Hydroxides to Metal-Organic Framework Films with Enhanced Adhesion

Hongye Yuan et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Bio-Inspired Stretchable, Adhesive, and Conductive Structural Color Film for Visually Flexible Electronics

Yu Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

A Separation-Sensing Membrane Performing Precise Real-Time Serum Analysis During Blood Drawing

Zhenyu Chu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Review Biophysics

Emerging design strategies for constructing multiplex lateral flow test strip sensors

Yuhao Wu et al.

BIOSENSORS & BIOELECTRONICS (2020)

Article Materials Science, Multidisciplinary

Advancing Metal-Organic Frameworks toward Smart Sensing: Enhanced Fluorescence by a Photonic Metal-Organic Framework for Organic Vapor Sensing

Joseph F. Olorunyomi et al.

ADVANCED OPTICAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Hierarchically Structured Porous Piezoelectric Polymer Nanofibers for Energy Harvesting

Mohammad Mahdi Abolhasani et al.

ADVANCED SCIENCE (2020)

Review Chemistry, Physical

Detection of food spoilage and adulteration by novel nanomaterial-based sensors

Zahra Mohammadi et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)

Article Polymer Science

Development of dopamine biosensor based on polyaniline/carbon quantum dots composite

Chanida Ratlam et al.

JOURNAL OF POLYMER RESEARCH (2020)

Review Chemistry, Physical

Fiber Composites of Metal-Organic Frameworks

Kaikai Ma et al.

CHEMISTRY OF MATERIALS (2020)

Review Chemistry, Analytical

Application trends of nanofibers in analytical chemistry

Bo-Tao Zhang et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2020)

Article Nanoscience & Nanotechnology

MOF-on-MOF Membrane with Cascading Functionality for Capturing Dichromate Ions and p-Arsanilic Acid Turn-On Sensing

Ke Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Colorimetric Dye-Loaded Nanofiber Yarn: Eye-Readable and Weavable Gas Sensing Platform

Dong-Ha Kim et al.

ACS NANO (2020)

Article Biophysics

Smart plant-wearable biosensor for in-situ pesticide analysis

Fengnian Zhao et al.

BIOSENSORS & BIOELECTRONICS (2020)

Article Biophysics

Facile biosensors for rapid detection of COVID-19

Lizhou Xu et al.

BIOSENSORS & BIOELECTRONICS (2020)

Article Materials Science, Multidisciplinary

A flexible paper sensor based on polyaniline/germanium film for NH3 detection

Lei Li et al.

MATERIALS LETTERS (2020)

Article Materials Science, Multidisciplinary

A lanthanide MOF immobilized in PMMA transparent films as a selective fluorescence sensor for nitroaromatic explosive vapours

Francisco G. Moscoso et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Review Chemistry, Multidisciplinary

Toward Mass Production of CVD Graphene Films

Bing Deng et al.

ADVANCED MATERIALS (2019)

Review Engineering, Environmental

Graphene and graphene derivatives toughening polymers: Toward high toughness and strength

Jianfeng Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Review Chemistry, Multidisciplinary

Bio-Integrated Wearable Systems: A Comprehensive Review

Tyler R. Ray et al.

CHEMICAL REVIEWS (2019)

Review Chemistry, Multidisciplinary

Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications

Jiajia Xue et al.

CHEMICAL REVIEWS (2019)

Article Nanoscience & Nanotechnology

A Water-Stable Luminescent Metal-Organic Framework for Rapid and Visible Sensing of Organophosphorus Pesticides

Kaiyu He et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Opportunities and challenges for nanotechnology in the agri-tech revolution

Gregory V. Lowry et al.

NATURE NANOTECHNOLOGY (2019)

Article Engineering, Electrical & Electronic

A flexible capacitive sensor based on the electrospun PVDF nanofiber membrane with carbon nanotubes

Xiaofeng Yang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Article Nanoscience & Nanotechnology

Metal-Organic-Framework-Based Enzymatic Microfluidic Biosensor via Surface Patterning and Biomineralization

Munirah Mohammad et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

Nylon-MOF Composites through Postsynthetic Polymerization

Mark Kalaj et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Analytical

Co-MOF nanosheet array: A high-performance electrochemical sensor for non-enzymatic glucose detection

Yao Li et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Multidisciplinary

A new post-synthetic polymerization strategy makes metal-organic frameworks more stable

Shuliang Yang et al.

CHEMICAL SCIENCE (2019)

Article Chemistry, Analytical

Rhodamine-fluorene based dual channel probe for the detection of Hg2+ions and its application in digital printing

Kyeong Su Min et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Chemistry, Analytical

In situ secondary growth of Eu(III)-organic framework film for fluorescence sensing of sulfur dioxide

Jun Zhang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Review Chemistry, Analytical

Recent advances in graphene-based magnetic composites for magnetic solid-phase extraction

Na Li et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2018)

Article Nanoscience & Nanotechnology

Rimelike Structure-Inspired Approach toward in Situ-Oriented Self-Assembly of Hierarchical Porous MOF Films as a Sweat Biosensor

Zhengyun Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Nanoscience & Nanotechnology

Highly Sensitive and Discriminative Detection of BTEX in the Vapor Phase: A Film-Based Fluorescent Approach

Zhaolong Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Wearable Ring-Based Sensing Platform for Detecting Chemical Threats

Juliane R. Sempionatto et al.

ACS SENSORS (2017)

Article Chemistry, Multidisciplinary

Solid Electrolyte Gas Sensor Based on a Proton-Conducting Graphene Oxide Membrane

Azumi Miyamoto et al.

ACS OMEGA (2017)

Article Nanoscience & Nanotechnology

Dye@bio-MOF-1 Composite as a Dual-Emitting Platform for Enhanced Detection of a Wide Range of Explosive Molecules

Chen Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Multidisciplinary

Metal-organic frameworks: functional luminescent and photonic materials for sensing applications

William P. Lustig et al.

CHEMICAL SOCIETY REVIEWS (2017)

Review Chemistry, Multidisciplinary

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Chaoliang Tan et al.

CHEMICAL REVIEWS (2017)

Article Chemistry, Multidisciplinary

A Two-Dimensional Lamellar Membrane: MXene Nanosheet Stacks

Li Ding et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Chemistry, Physical

Silica nanoparticle based techniques for extraction, detection, and degradation of pesticides

Gandhali Bapat et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2016)

Article Chemistry, Analytical

A portable electrochemical immunosensor for rapid detection of trace aflatoxin B-1 in rice

Zhanming Li et al.

ANALYTICAL METHODS (2016)

Article Chemistry, Multidisciplinary

Preparation of Nanofibrous Metal-Organic Framework Filters for Efficient Air Pollution Control

Yuanyuan Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Review Multidisciplinary Sciences

Technology-driven layer-by-layer assembly of nanofilms

Joseph J. Richardson et al.

SCIENCE (2015)

Editorial Material Chemistry, Multidisciplinary

Introduction to Metal-Organic Frameworks

Hong-Cai Zhou et al.

CHEMICAL REVIEWS (2012)

Article Chemistry, Multidisciplinary

Rapid fabrication of metal organic framework thin films using microwave-induced thermal deposition

Yeonshick Yoo et al.

CHEMICAL COMMUNICATIONS (2008)