☆ 4.8 Article

Machine-Learning-Assisted Design of Highly Tough Thermosetting Polymers

ACS APPLIED MATERIALS & INTERFACES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Characterization of carbon fiber-reinforced thermoplastic and thermosetting polyimide matrix composites manufactured by using various synthesized PI precursor resins

Mustafa Cakir et al.

Summary: Manufacturing thermoplastic and thermosetting PI matrix composites with CF reinforcement was investigated in this study. The thermoplastic composite obtained from PAAS precursor showed superior mechanical and thermal properties compared to other composites. However, the NA-terminated PAAS precursor did not exhibit similar effect in terms of mechanical properties, while the NA-terminated PAA precursor resin showed high mechanical properties in addition to its thermal properties.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Engineering, Manufacturing

Comparison of toughening mechanisms in natural silk-reinforced composites with three epoxy resin matrices

Kang Yang et al.

Summary: Natural silk fibre can enhance the toughness and impact strength of composites when reinforced in polymer matrices, with the epoxy resin derived from bisphenol-A epoxy and aliphatic diamine precursors showing the highest performance in terms of tensile breaking energy and impact strength. The toughening mechanisms in these composites are mainly crack propagation and fiber pull-out, regardless of whether the matrix is brittle or ductile. The study aims to provide guidelines for designing matrices in silk fibre-reinforced plastics with optimal toughness by identifying key toughening mechanisms.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Machine Learning Yield Prediction from NiCOlit, a Small-Size Literature Data Set of Nickel Catalyzed C-O Couplings

Jules Schleinitz et al.

Summary: This study focuses on the application of machine learning in predicting synthetic yields and builds a dataset based on organic reaction publications. The study finds that including optimization data improves prediction accuracy and emphasizes the impact of publication constraints on the exploration of chemical space by the synthetic community.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

A cast-in-place fabrication of high performance epoxy composites cured in an in-situ synthesized 3D foam of nanofibers

Nabil Kadhim et al.

Summary: A three-dimensional nanofibers foam (3D NFF) has been fabricated and applied to enhance epoxy resin composite, showing improved compressive and flexural strength compared to pure epoxy. The 3D NFF skeletons with different densities were fabricated by regulating growth conditions, and conveniently modified with a silane coupling agent to improve interface interaction with the epoxy matrix.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

A Machine Learning Approach for the Prediction of Formability and Thermodynamic Stability of Single and Double Perovskite Oxides

Anjana Talapatra et al.

Summary: The study explores the chemical space of single and double oxide perovskites, using machine learning models to identify novel stable oxide perovskites. It reveals 414 compositions as the most promising candidates for future experimental synthesis.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polymer design using genetic algorithm and machine learning

Chiho Kim et al.

Summary: The combination of genetic algorithm and ML-based predictive models has been utilized to design polymers with extreme performance criteria, creating 132 chemically unique polymers with high T-g and E-g. The algorithm also reveals chemical guidelines for composing polymers with extreme thermal and electrical performance metrics.

COMPUTATIONAL MATERIALS SCIENCE (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

High performance epoxy resin composites modified with multifunctional thiophene/phosphaphenanthrene-based flame retardant: Excellent flame retardance, strong mechanical property and high transparency

Hao Wang et al.

Summary: This study successfully prepared EP/BDO composites with excellent comprehensive performance by synthesizing a reactive flame-retardant BDO, which showed significant improvements in flame retardance, mechanical properties, and transparency. The composites also exhibited heat and smoke suppression effects, in addition to enhanced tensile and bending strength compared with neat EP.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Polymer Science

A Combined Theoretical and Experimental Study of the Polymer Matrix-Mediated Stress Transfer in a Cellulose Nanocomposite

Anna Peterson et al.

Summary: The study shows that direct cellulose/cellulose interactions are not necessary for reinforcement in cellulose nanocrystal composites. Instead, strong cellulose/polymer interactions, such as ionic interactions and hydrogen bonding, play a crucial role in stress transfer and reinforcement. Orienting cellulose nanocrystals through melt spinning can reduce cellulose/cellulose interactions, leading to an efficient reinforcing effect in the composite.

MACROMOLECULES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Bias free multiobjective active learning for materials design and discovery

Kevin Maik Jablonka et al.

Summary: This study utilizes an active learning algorithm and Pareto dominance relation to compute a set of Pareto optimal materials for multi-objective material design. By conducting molecular simulations, the number of materials that need to be evaluated is drastically reduced, enhancing design efficiency.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Electrocaloric Effect of Structural Configurated Ferroelectric Polymer Nanocomposites for Solid-State Refrigeration

Yusuf Abdullahi Hassan et al.

Summary: The study found that ferroelectric polymer nanocomposites composed of boron nitrate fibers (BNf) + BCZT@BaTiO3(f) + PVDF have superior cooling power and energy storage density, with a cooling power density of 162.2 W/cm(3) and energy storage density of 33.4 J/cm(3).

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Machine Learning Guided Synthesis of Multinary Chevrel Phase Chalcogenides

Nicholas R. Singstock et al.

Summary: The Chevrel phase (CP) is a promising class of molybdenum chalcogenides, and a new machine-learned descriptor (H-delta) has been developed to rapidly and accurately assess CP stability. This approach successfully synthesized underexplored tellurides CPs and confirmed their preference for cation channel site occupation, showing potential for accelerating the discovery of synthesizable materials within a sparse class.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Polymer Science

Cross-Linking Effect on Segmental Dynamics of Well-Defined Epoxy Resins

Atsuomi Shundo et al.

Summary: Increasing the cross-linking density in epoxy resins leads to a higher glass transition temperature and a decrease in the spatial scale of cooperative rearranging region, accompanied by an increase in dynamic heterogeneity. This knowledge can help to better understand the physical properties of thermosetting polymers.

MACROMOLECULES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Deep Retrosynthetic Reaction Prediction using Local Reactivity and Global Attention

Shuan Chen et al.

Summary: Retrosynthesis is a fundamental problem in chemistry, and the goal of AI-aided retrosynthesis is to automate the process by learning from previous chemical reactions. This study introduces a new local retrosynthesis framework, inspired by the chemical intuition that molecular changes occur mainly locally during reactions, and refines the model to account for the nonlocal effects of chemical reactions through a global attention mechanism.

JACS AU (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Prediction of chemical reaction yields using deep learning

Philippe Schwaller et al.

Summary: Artificial intelligence is playing a crucial role in organic chemistry, particularly in areas such as reaction prediction and synthesis planning. Despite the potential of accurately predicting reaction yields, it has received less attention compared to other aspects. Predicting reaction yields can guide chemists in selecting high-yielding reactions and reducing the number of experimental attempts.

MACHINE LEARNING-SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Environmental

A novel phosphorus-containing semi-aromatic polyester toward flame retardancy and enhanced mechanical properties of epoxy resin

Xiao-Feng Liu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Al-Assisted Exploration of Superionic Glass-Type Li+ Conductors with Aromatic Structures

Kan Hatakeyama-Sato et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Developing Highly Tough, Heat-Resistant Blend Thermosets Based on Silicon-Containing Arylacetylene: A Material Genome Approach

Guanru Gao et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolving the Materials Genome: How Machine Learning Is Fueling the Next Generation of Materials Discovery

Changwon Suh et al.

Annual Review of Materials Research (2020)

添加到收藏夹

Article Chemistry, Physical

Rational Design of Heat-Resistant Polymers with Low Curing Energies by a Materials Genome Approach

Junli Zhu et al.

CHEMISTRY OF MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Frequency-dependent dielectric constant prediction of polymers using machine learning

Lihua Chen et al.

NPJ COMPUTATIONAL MATERIALS (2020)

添加到收藏夹

Article Thermodynamics

Curing kinetics and mechanical properties of epoxy resin/1-benzyl-2-methylimidazole/isophorone diamine system

Xueting Zhao et al.

THERMOCHIMICA ACTA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Composition optimization of a high-performance epoxy resin based on molecular dynamics and machine learning

Kai Jin et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Review Biochemical Research Methods

Graph convolutional networks for computational drug development and discovery

Mengying Sun et al.

BRIEFINGS IN BIOINFORMATICS (2020)

添加到收藏夹

Article Polymer Science

Molecular-level dispersion of rigid-rod sulfonated aromatic polyamides in epoxy resin for extraordinary improvement in both strength and toughness

Guodong Zhou et al.

POLYMER (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Synthesis of a benzoxazine-type dispersant and its application on epoxy/benzoxazine/ZrO2 composite: Dispersion performance and tensile behavior

Cong Peng et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis of a novel silicon-containing epoxy resin and its effect on flame retardancy, thermal, and mechanical properties of thermosetting resins

Peng Yang et al.

MATERIALS TODAY COMMUNICATIONS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Benzimidazolyl-substituted cyclotriphosphazene derivative as latent flame-retardant curing agent for one-component epoxy resin system with excellent comprehensive performance

Jianwen Cheng et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Scoping the polymer genome: A roadmap for rational polymer dielectrics design and beyond

Arun Mannodi-Kanakkithodi et al.

MATERIALS TODAY (2018)

添加到收藏夹

Article Chemistry, Physical

Self-assembled complexes of graphene oxide and oxidized vapor-grown carbon fibers for simultaneously enhancing the strength and toughness of epoxy and multi-scale carbon fiber/epoxy composites

Guodong Zhou et al.

CARBON (2018)

添加到收藏夹

Article Engineering, Environmental

A novel multi-functional polymeric curing agent: Synthesis, characterization, and its epoxy resin with simultaneous excellent flame retardance and transparency

Zhu-Bao Shao et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Chemistry, Physical

Polymer Genome: A Data-Powered Polymer Informatics Platform for Property Predictions

Chiho Kim et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

添加到收藏夹

Review Multidisciplinary Sciences

Machine learning for molecular and materials science

Keith T. Butler et al.

NATURE (2018)

添加到收藏夹

Article Chemistry, Applied

Mechanism of modulus improvement for epoxy resin matrices: A molecular dynamics simulation

Wenqing Zhang et al.

REACTIVE & FUNCTIONAL POLYMERS (2017)

添加到收藏夹

Article Chemistry, Physical

Materials Genome in Action: Identifying the Performance Limits of Physical Hydrogen Storage

Aaron W. Thornton et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of cross-linking on dynamic mechanical and fracture behavior of epoxy variants

R. Rahul et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Polymer Science

Reactive Compatibilization of Poly(ethylene terephthalate) and High-Density Polyethylene Using Amino-Telechelic Polyethylene

Alexander D. Todd et al.

MACROMOLECULES (2016)

添加到收藏夹

Article Polymer Science

Thermoset Blends of an Epoxy Resin and Polydicyclopentadiene

Brian J. Rohde et al.

MACROMOLECULES (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Synthesis and application of epoxy resins: A review

Fan-Long Jin et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Flexible high-temperature dielectric materials from polymer nanocomposites

Qi Li et al.

NATURE (2015)

添加到收藏夹

Review Multidisciplinary Sciences

Probabilistic machine learning and artificial intelligence

Zoubin Ghahramani

NATURE (2015)

添加到收藏夹

Review Engineering, Multidisciplinary

Epoxy clay nanocomposites - processing, properties and applications: A review

Asif Abdul Azeez et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Engineering, Civil

Evaluating the influence of varied fire-retardant surface coatings on post-heat flexural properties of glass/epoxy composites

Everson Kandare et al.

FIRE SAFETY JOURNAL (2013)

添加到收藏夹

Article Polymer Science

The Effects of Polyamic Acid on Curing Behavior, Thermal Stability, and Mechanical Properties of Epoxy/DDS System

Liu Yong et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

添加到收藏夹

Article Chemistry, Applied

Phenolic resins: 100 Years and still going strong

Louis Pilato

REACTIVE & FUNCTIONAL POLYMERS (2013)

添加到收藏夹

Article Chemistry, Applied

Phenolic resins-100 years of progress and their future

Kazuhisa Hirano et al.

REACTIVE & FUNCTIONAL POLYMERS (2013)

添加到收藏夹

Review Polymer Science

Advanced polyimide materials: Syntheses, physical properties and applications

Der-Jang Liaw et al.

PROGRESS IN POLYMER SCIENCE (2012)

添加到收藏夹

Article Polymer Science

Molecular dynamics predictions of thermal and mechanical properties of thermoset polymer EPON862/DETDA

Chunyu Li et al.

POLYMER (2011)

添加到收藏夹

Article Materials Science, Composites

Dynamic tensile properties of carbon fiber composite based on thermoplastic epoxy resin loaded in matrix-dominant directions

Norihiko Taniguchi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Chemistry, Medicinal

On the Art of Compiling and Using 'Drug-Like' Chemical Fragment Spaces

Joerg Degen et al.

CHEMMEDCHEM (2008)

添加到收藏夹

Article Mechanics

Investigation of the mechanical properties of DGEBA-based epoxy resin with nanoclay additives

B. Qi et al.

COMPOSITE STRUCTURES (2006)

添加到收藏夹

Review Physics, Multidisciplinary

Power laws, Pareto distributions and Zipf's law

MEJ Newman

CONTEMPORARY PHYSICS (2005)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhancing the effectiveness of virtual screening by fusing nearest neighbor lists: A comparison of similarity coefficients

M Whittle et al.

JOURNAL OF CHEMICAL INFORMATION AND COMPUTER SCIENCES (2004)

添加到收藏夹

Article Chemistry, Physical

Epoxy resin-photopolymer composites for volume holography

TJ Trentler et al.

CHEMISTRY OF MATERIALS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.