☆ 4.0 Article

Modeling of a Sn-Based HTM-Free Perovskite Solar Cell Using a One-Dimensional Solar Cell Capacitance Simulator Tool

TRANSACTIONS OF TIANJIN UNIVERSITY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Nanoscience & Nanotechnology

Plasmonic-perovskite solar cells, light emitters, and sensors

Bin Ai et al.

Summary: This review summarizes the recent theoretical and experimental works on plasmonic perovskite solar cells, light emitters, and sensors. The underlying physical mechanisms, design routes, device performances, and optimization strategies are discussed, along with challenges and future directions for the plasmonic perovskite research field.

MICROSYSTEMS & NANOENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Numerical Simulation of 30% Efficient Lead-Free Perovskite CsSnGeI3-Based Solar Cells

Hussein Sabbah

Summary: In this study, the lead-free CsSnGeI3 PSC was quantitatively analyzed using a solar cell capacitance simulator. The results showed that using SnO2 as the electron transport layer can significantly increase the PCE of the PSC. Furthermore, the defect density of the absorber layer was found to greatly affect the device efficiency.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Impact of HTM on lead-free perovskite solar cell with high efficiency

Aloke Kumar Das et al.

Summary: The Scaps-1d simulator was used to simulate lead-free perovskite CH3NH3SnI3 based solar cell devices with different hole transport materials (HTM). The results show that utilizing CuO as an HTM produces the best outcomes, with an efficiency of 28.45%. The thickness, acceptor concentration, and defect density of the perovskite layer are important factors affecting the optoelectronic properties of the solar cell.

OPTICAL AND QUANTUM ELECTRONICS (2022)

添加到收藏夹

Article Energy & Fuels

Additive engineering for improving the stability of tin-based perovskite (FASnI3) solar cells

Shaojie Li et al.

Summary: Tin-based perovskites have shown promising properties in the field of photovoltaics, but their stability remains a concern. This review provides a comprehensive understanding of defect formation and oxidation mechanism of Sn2+ in tin-based perovskites. The effect of additive engineering on the stability of FASnI(3) PSCs is also discussed. Several key scientific issues and future research prospects are proposed for achieving stable and high-performance Sn-based perovskite photovoltaics.

SOLAR ENERGY (2022)

添加到收藏夹

Article Energy & Fuels

Simulation of Perovskite Solar Cells Optimized by the Inverse Planar Method in SILVACO: 3D Electrical and Optical Models

Naser Fakhri et al.

Summary: Perovskite solar cells (PSCs) have great potential in improving efficiency and stability, with the combination of silicon and perovskite, as well as proper selection of anti-reflective coatings, being effective methods to enhance efficiency.

ENERGIES (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Simulated performance of a novel solid-state dye-sensitized solar cell based on phenyl-C61-butyric acid methyl ester (PC61BM) electron transport layer

Benjamin K. Korir et al.

Summary: This study optimized the performance of a novel solid-state dye-sensitized solar cell through numerical simulation, achieving satisfactory conversion efficiency and maximum short-circuit current. The structure is non-toxic and has great potential for applications.

OPTICAL AND QUANTUM ELECTRONICS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Recent progress in stabilizing perovskite solar cells through two-dimensional modification

Chongyang Zhi et al.

Summary: Researchers have explored a strategy of modifying the structure of lead halide perovskite solar cells with hydrophobic organic cations to improve both efficiency and stability. This approach involves multidimensional tuning of the bulk and interfaces of perovskite materials, defect passivation, and interface functionalization. Ultimately, stability improvement through 2D modifications has been proven effective.

APL MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

Numerical simulation of heat distribution in RGO-contacted perovskite solar cells using COMSOL

Soma Zandi et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-performance hole conductor-free perovskite solar cell using a carbon nanotube counter electrode

Mustafa K. A. Mohammed

RSC ADVANCES (2020)

添加到收藏夹

Article Multidisciplinary Sciences

9.05% HTM free perovskite solar cell with negligible hysteresis by introducing silver nanoparticles encapsulated with P4VP polymer

Danladi Eli et al.

SN APPLIED SCIENCES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optical properties of the perovskite films deposited on meso-porous TiO2 by one step and hot casting techniques

Naser Jahanbakhshi Zadeh et al.

THIN SOLID FILMS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Achieving Long-Term Operational Stability of Perovskite Solar Cells with a Stabilized Efficiency Exceeding 20% after 1000 h

Tae-Youl Yang et al.

ADVANCED SCIENCE (2019)

添加到收藏夹

Article Physics, Applied

Modeling of a high performance bandgap graded Pb-free HTM-free perovskite solar cell

Davoud Jalalian et al.

EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A modeled perovskite solar cell structure with a Cu2O hole-transporting layer enabling over 20% efficiency by low-cost low-temperature processing

Lingyan Lin et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Improved environmental stability of HTM free perovskite solar cells by a modified deposition route

Zeinab Safari et al.

CHEMICAL PAPERS (2019)

添加到收藏夹

Article Chemistry, Physical

Low-dimensional perovskite interlayer for highly efficient lead-free formamidinium tin iodide perovskite solar cells

Ke Chen et al.

NANO ENERGY (2018)

添加到收藏夹

Article Physics, Applied

The roles of carrier concentration and interface, bulk, and grain-boundary recombination for 25% efficient CdTe solar cells

A. Kanevce et al.

JOURNAL OF APPLIED PHYSICS (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Effect of temperature on the photovoltaic performance and stability of solid-state dye-sensitized solar cells: A review

Umer Mehmood et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Plasmonic Effects of Metallic Nanoparticles on Enhancing Performance of Perovskite Solar Cells

Qi Luo et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Proceedings Paper Physics, Applied

Simulation of Mixed-Host Emitting Layer based Organic Light Emitting Diodes

C. Riku et al.

NATIONAL PHYSICS CONFERENCE 2014 (PERFIK 2014) (2015)

添加到收藏夹

Article Physics, Applied

Numerical simulation: Toward the design of high-efficiency planar perovskite solar cells

Feng Liu et al.

APPLIED PHYSICS LETTERS (2014)

添加到收藏夹

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Advanced electrical simulation of thin film solar cells

Marc Burgelman et al.

THIN SOLID FILMS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mesoscopic CH3NH3PbI3/TiO2 Heterojunction Solar Cells

Lioz Etgar et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterisation and modelling of chalcopyrite solar cells

R Klenk

THIN SOLID FILMS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.