☆ 4.7 Article

Stable CsPbI3 Nanoplatelets with Tunable Morphologies and Dimensions for Red Light-Emitting Diodes

ACS APPLIED NANO MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

A-Site Substitute for Fabricating All-Inorganic Perovskite CsPbCl3 with Application in Self-Powered Ultraviolet Photodetectors

Dongjie Ren et al.

Summary: In this study, a high-quality CsPbCl3 microcrystalline film was successfully fabricated by introducing an A-site substitute route. The device performance was enhanced through a pressure-assisted annealing strategy. The optimized PDs showed excellent device performances and good stability, laying a foundation for the application of all inorganic perovskite materials in the field of ultraviolet photodetectors.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2022)

添加到收藏夹

Review Optics

Inorganic halide perovskites for lighting and visible light communication

Shuangyi Zhao et al.

Summary: This review provides an overview of inorganic halide perovskites (IHPs) as white light-emitting diodes (WLEDs) for lighting applications. It discusses the generation of luminescence and white light in IHPs, and synthetically analyzes the photoluminescence and electro-luminescence WLEDs with IHPs emitters. The optical performance enhancement of IHPs in WLEDs is demonstrated, and the potential of visible light communication based on IHPs is highlighted. The review concludes with perspectives on the evolution and challenges of IHPs and an outlook on their future development.

PHOTONICS RESEARCH (2022)

添加到收藏夹

Article Optics

Template Assembled Large-Size CsPbBr3 Nanocomposite Films toward Flexible, Stable, and High-Performance X-Ray Scintillators

Baiqian Wang et al.

Summary: Metal halide perovskite-based high-performance X-ray scintillator is considered a promising candidate in medicine, industry, and science. However, the stability of current perovskite-based X-ray scintillators is a limiting factor for their widespread use. In this study, a template assembled method is used to prepare large-size, flexible, and stable CsPbBr3@Polymethyl methacrylate composite films, and their detection performance is investigated.

LASER & PHOTONICS REVIEWS (2022)

添加到收藏夹

Article Chemistry, Physical

Efficient CsPbBr3 Nanoplatelet-Based Blue Light-Emitting Diodes Enabled by Engineered Surface Ligands

Haoran Wang et al.

Summary: In this study, short-ligand capped CsPbBr3 nanoplatelets were successfully synthesized with controlled crystal growth kinetics and surface defect passivation. Further treatment with short conjugation ligand improved their electrical performance and luminous efficiency.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Optics

Highly efficient emission and high-CRI warm white light-emitting diodes from ligand-modified CsPbBr3 quantum dots

Dongdong Yan et al.

Summary: CsPbBr3 perovskite quantum dots with excellent stability and efficient emission were synthesized by using 2-hexyldecanoic acid as a ligand. Warm white light-emitting diodes were constructed by combining the modified CsPbBr3 QDs with other quantum dots and emitting chips, showing high color quality and efficiency.

OPTO-ELECTRONIC ADVANCES (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mn:CsPbBr3 Nanoplatelets for Bright White-Emitting Displays

Yubin Zhao et al.

Summary: Controlled ion-exchange reactions were used to synthesize Mn-doped CsPbBr3 nanoplatelets with superior photoluminescence properties. By adjusting the thickness and Mn doping level, the photoluminescence peaks and intensity of the NPLs were successfully tuned. The ion exchange process enhanced the PL quantum yield and intensity without changing the morphology of the sample.

ACS APPLIED NANO MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Mixed halide CsPb(Br1-xIx)3 nanocrystals for green, orange, and red light-emitting diodes

Seung-Gyun Moon et al.

Summary: This study reported a facile synthesis method for CsPb(Br1-xIx)(3) NCs emitting wavelengths from green to red using a halide exchange post-treatment. LEDs emitting from green to red wavelengths were successfully demonstrated based on the CsPb(Br1-xIx)(3) NCs. The CsPb(Br1-xIx)(3) NCs exhibited abnormal electroluminescence (EL) spectra during LED operation, which were attributed to modification during the fabrication process and electrical field-induced phase-segregation.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Engineering, Environmental

Self-powered UV photodetectors based on CsPbCl3 nanowires enabled by the synergistic effect of acetate and lanthanide ion passivation

Xiufeng Wu et al.

Summary: A self-powered UV photodetector based on Eu(AcO)(3) promoted CsPbCl3 nanowires (NWs) was developed, demonstrating high responsivity and detectivity, as well as fast response speed. The potential of 1D perovskite NWs for developing next-generation self-powered UV photodetectors was highlighted in this study.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Emerging Perovskite Materials with Different Nanostructures for Photodetectors

Hao Gu et al.

Summary: This article summarizes the recent advances in the strategies of preparing novel lead trihalide perovskites with different nanostructures and their applications in photodetectors. It comprehensively discusses the semiconductor selection and structure-performance relationships of various photodetectors, as well as presents a brief summary and in-depth discussion regarding the current challenges and perspectives for the future development of perovskite-based photodetectors.

ADVANCED OPTICAL MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

The Impact of Precursor Ratio on the Synthetic Production, Surface Chemistry, and Photovoltaic Performance of CsPbI3 Perovskite Quantum Dots

Yuli Qian et al.

Summary: The study explores a versatile ternary-precursor method to investigate the effect of precursor ratios on the synthesis, surface chemistry, and photovoltaic performance of CsPbI3 QDs. It shows that adjusting the Pb/Cs and Pb/I ratios can significantly improve the reaction yield and optical properties of the resulting QDs. By rational tuning of the synthetic protocol, the reaction yield can be increased by more than 7.5 times, and material cost can be reduced from 303 $ g(-1) to as low as 42 $ g(-1) compared to the conventional binary-precursor method.

SOLAR RRL (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Self-Assembly of CsPbBr3 Nanocubes into 2D Nanosheets

Qingye Zhang et al.

Summary: In this study, 2D CsPbBr3 nanosheets with a thickness of about 3 nm were successfully synthesized, and their lateral dimensions were found to be adjustable by tuning the ratio of short and long ligands. The nanosheets resulted from the self-assembly of CsPbBr3 nanocubes, with a narrow amorphous region between adjacent nanocubes. Insights into the structure and growth mechanism of these nanosheets were obtained through microstructural characterizations and theoretical calculations.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Transition metal halide derived phase transition from Cs4PbCl6 to CsPbxM1-xX3 for bright white light-emitting diodes

Wenbin Shi et al.

Summary: In this study, highly luminescent and stable CsPbxM1-xX3 NCs were synthesized using a post-processing method. The insertion reaction of cations was promoted during the halogen anion exchange process, leading to improved photoluminescence quantum yields. The PL films prepared with CsPbxZn1-x(Cl/Br)(3), CsPbBr3, and CsPb(Br/I)(3) NCs dispersed in polymethyl methacrylate solutions exhibited bright white emission with high stability when excited by a commercial LED chip.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controlling the growth of a SiO2 coating on hydrophobic CsPbBr3 nanocrystals towards aqueous transfer and high luminescence

Meng Li et al.

Summary: The successful preparation of CsPbBr3@SiO2 capsules with enhanced stability opens up new possibilities for the development of lead halide perovskite nanomaterials. The SiO2 shell acts as a buffer layer to block direct contact between CsPbBr3 and excess PbBr2 precursor, leading to improved stability in polar solvents and air. The bright green emission observed after 90 days under UV light further highlights the potential of this approach in improving the performance and longevity of these nanomaterials.

NANOSCALE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Dimensional Laser-Assisted Patterning of Blue-Emissive Metal Halide Perovskite Nanocrystals inside a Glass with Switchable Photoluminescence

Xiongjian Huang et al.

ACS NANO (2020)

添加到收藏夹

Article Chemistry, Physical

Tin-Lead Alloying for Efficient and Stable All-Inorganic Perovskite Solar Cells

Zuobao Yang et al.

CHEMISTRY OF MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Spectral Tuning of Efficient CsPbBrxCl3-x Blue Light-Emitting Diodes via Halogen Exchange Triggered by Benzenesulfonates

Fanghao Ye et al.

CHEMISTRY OF MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Dependence of phase transitions on halide ratio in inorganic CsPb(BrxI1-x)3 perovskite thin films obtained from high-throughput experimentation

H. Naesstroem et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Broad-band lead halide perovskite quantum dot single-mode lasers

Chun Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tunable electroluminescence from an n-ZnO/p-GaN heterojunction with a CsPbBr3 interlayer grown by pulsed laser deposition

Yu Huang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

添加到收藏夹

Article Chemistry, Physical

Interfacial Synthesis of Monodisperse CsPbBr3 Nanorods with Tunable Aspect Ratio and Clean Surface for Efficient Light-Emitting Diode Applications

Di Yang et al.

CHEMISTRY OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Highly Luminescent and Stable Halide Perovskite Nanocrystals

Ye Wu et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Physics, Applied

All‐Inorganic Perovskites: Aqueous Phase Exfoliating Quasi‐2D CsPbBr 3 Nanosheets with Ultrahigh Intrinsic Water Stability (Small 34/2019)

Meilin Xie et al.

Small (2019)

添加到收藏夹

Article Chemistry, Physical

Reversible Color Switching in Dual-Emitting Mn(II)-Doped CsPbBr3 Perovskite Nanorods: Dilution versus Evaporation

Shyamal Kumar Mehetor et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

Engineering Green-to-Blue Emitting CsPbBr3 Quantum-Dot Films with Efficient Ligand Passivation

Maowei Jiang et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

Achieving Near-Unity Photoluminescence Efficiency for Blue-Violet-Emitting Perovskite Nanocrystals

Navendu Mondal et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

Highly efficient CsPbIBr2 perovskite solar cells with efficiency over 9.8% fabricated using a preheating-assisted spin-coating method

Yuxiao Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Doping-Enhanced Short-Range Order of Perovskite Nanocrystals for Near-Unity Violet Luminescence Quantum Yield

Zi-Jun Yong et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Benzoyl Halides as Alternative Precursors for the Colloidal Synthesis of Lead-Based Halide Perovskite Nanocrystals

Muhammad Imran et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Photostability and Photodegradation Processes in Colloidal CsPbI3 Perovskite Quantum Dots

Rui An et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Physical

Synthesis of All-Inorganic Cd-Doped CsPbCl3 Perovskite Nanocrystals with Dual-Wavelength Emission

Tong Cai et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tunable Length and Optical Properties of CsPbX3 (X = Cl, Br, I) Nanowires with a Few Unit Cells

Daniel Amgar et al.

NANO LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Strontium-Doped Low-Temperature-Processed CsPbI2Br Perovskite Solar Cells

Cho Fai Jonathan Lau et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

From Precursor Powders to CsPbX3 Perovskite Nanowires: One-Pot Synthesis, Growth Mechanism, and Oriented Self-Assembly

Yu Tong et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solvothermal Synthesis of High-Quality All-Inorganic Cesium Lead Halide Perovskite Nanocrystals: From Nanocube to Ultrathin Nanowire

Min Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Transmission Electron Microscopy Study of Electron Beam-Induced Transformations in Colloidal Cesium Lead Halide Perovskite Nanocrystals

Zhiya Dang et al.

ACS NANO (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ligand-Mediated Synthesis of Shape-Controlled Cesium Lead Halide Perovskite Nanocrystals via Reprecipitation Process at Room Temperature

Shibin Sun et al.

ACS NANO (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of Cesium Lead Halide Perovskite Nanocrystals in a Droplet-Based Microfluidic Platform: Fast Parametric Space Mapping

Ioannis Lignos et al.

NANO LETTERS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Luminescent Colloidal Nanoplates of Perovskite Cesium Lead Halide and Their Oriented Assemblies

Yehonadav Bekenstein et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanocrystals of Cesium Lead Halide Perovskites (CsPbX3, X = Cl, Br, and I): Novel Optoelectronic Materials Showing Bright Emission with Wide Color Gamut

Loredana Protesescu et al.

NANO LETTERS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Quantum Size Effect in Organometal Halide Perovskite Nanoplatelets

Jasmina A. Sichert et al.

NANO LETTERS (2015)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.