4.7 Article

Determining the Role of the Molecular Weight of Poly(Ethylene Glycol) Additives in Perovskite Photodetectors

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Thick-Layer Lead Iodide Perovskites with Bifunctional Organic Spacers Allylammonium and Iodopropylammonium Exhibiting Trap-State Emission

Eugenia S. Vasileiadou et al.

Summary: This article introduces three new homologous series of two-dimensional lead iodide perovskites with different organic cations and discusses their structural and technological features. The different organic cations have an impact on the structure and optical properties of the material. The study reveals that the incorporation of specific organic cations leads to lattice distortions and the formation of trap states.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Article Energy & Fuels

Furfurylammonium as a Spacer for Efficient 2D Ruddlesden-Popper Perovskite Solar Cells

Yi Zheng et al.

Summary: 2D perovskites are promising materials for solar cells due to their stability and diversity. The organic spacer cation, 2-furfurylammonium (FuMA(+)), plays a crucial role in the stability and performance of 2D perovskites. Thin films of (FuMA)(2)(MA)(4)Pb5I16 were successfully synthesized with increased crystal size and enhanced orientation, leading to a significant improvement in the efficiency of 2D perovskite solar cells. Moreover, these perovskite films can be prepared in ambient air and show high power conversion efficiency (PCE) even at 30% relative humidity.

SOLAR RRL (2022)

Article Nanoscience & Nanotechnology

Defect Passivation via Additive Engineering to Improve Photodetection Performance in CsPbI2Br Perovskite Photodetectors

Jia Li et al.

Summary: Adding a trace amount of PEG additive into the CsPbI2Br precursor solution efficiently passivates interfacial defects through Lewis acid-base interaction, leading to a significant reduction in trap density of state and suppression of noise current in perovskite photodetectors. This passivation strategy results in improved specific detectivity and linear dynamic range, demonstrating the feasibility of utilizing PEG as a polymeric additive for high photodetection performance in all-inorganic perovskite photodetectors.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Acetone-assisted precursor engineering enables low-temperature fabrication of CsPbI2Br perovskite for efficient solar cells

Weijian Tang et al.

Summary: By introducing acetone as a co-solvent in the precursor, this study successfully achieved the low-temperature fabrication of alpha-phase CsPbI2Br perovskite, resulting in improved wettability and reduced crystallization activation energy. The acetone-assisted CsPbI2Br device demonstrated superior efficiency and stability, approaching the highest reported efficiency for CsPbI2Br solar cells.

JOURNAL OF POWER SOURCES (2021)

Article Energy & Fuels

Enhancing Built-In Electric Field and Defect Passivation through Gradient Doping in Inverted CsPbI2Br Perovskite Solar Cells

Dongwei Han et al.

Summary: The study utilized a gradient doping strategy to optimize the inverted CsPbI2Br PeSCs, resulting in improved power conversion efficiency and device stability.

SOLAR RRL (2021)

Review Chemistry, Multidisciplinary

Recent Progress of Flexible Image Sensors for Biomedical Applications

Tomoyuki Yokota et al.

Summary: Flexible image sensors are gaining attention as new imaging devices due to their lightness, softness, and bendability. They offer high-accuracy continuous biometric information measurement directly attached to curved surfaces like skin, with potential applications in wearable devices and home medical care. The individual components, performance evaluation parameters, and real-world measurement cases of these sensors in the biomedical field are discussed.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Layered Perovskites Enhanced Perovskite Photodiodes

Ruiming Li et al.

Summary: This study systematically investigates the performance of layered perovskite-enhanced perovskite photodiodes and finds that adding large organic cations can reduce dark current and noise, increase detectivity, and maintain high speed. Furthermore, the layered perovskite-enhanced photodiodes exhibit less hysteresis and higher breakdown voltages.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Article Nanoscience & Nanotechnology

Functionalized Ionic Liquid-Crystal Additive for Perovskite Solar Cells with High Efficiency and Excellent Moisture Stability

Xuefeng Xia et al.

Summary: In this study, a functionalized ionic liquid crystal was developed as a novel chemical additive for high-efficiency and stable perovskite solar cells. The inclusion of the additive greatly improved the quality and stability of perovskite films, leading to a significant increase in power conversion efficiency.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Durable Defect Passivation of the Grain Surface in Perovskite Solar Cells with π-Conjugated Sulfamic Acid Additives

Kun Cao et al.

Summary: The use of 4-ABSA as a passivation agent for perovskite solar cells has shown to significantly improve efficiency and stability, by constructing a compact and smooth perovskite film and passivating both negative- and positive-charged defects. The pi-conjugated system in 4-ABSA also induces preferred perovskite crystal orientation, leading to enhanced power conversion efficiency.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Multidisciplinary Sciences

Unveiling the additive-assisted oriented growth of perovskite crystallite for high performance light-emitting diodes

Lin Zhu et al.

Summary: Solution-processed metal halide perovskites with additives play a crucial role in passivating defects and influencing the crystallization process. By tracking chemical interactions and crystallographic evolution, suitable additives can be found to improve the quality of perovskite films and device performance.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Stable and sensitive tin-lead perovskite photodetectors enabled by azobenzene derivative for near-infrared acousto-optic conversion communications

Ningning Ma et al.

Summary: In this study, azobenzene derivative was used as a multifunctional additive in Sn-Pb perovskite photodetectors to dramatically improve device performance and stability, effectively inhibiting trap-induced recombination. This provides a universal strategy to achieve stable and sensitive Sn-Pb perovskite photodetectors.

NANO ENERGY (2021)

Article Materials Science, Multidisciplinary

Surface passivation by congeneric quantum dots for high-performance and stable CsPbBr3-based photodetectors

Shikai Yan et al.

Summary: The introduction of congeneric CsPbBr3 quantum dots (QDs) to decorate the surface of CsPbBr3 films effectively improves the surface morphology and reduces surface defects, leading to enhanced performance and stability of photodetectors.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Nanoscience & Nanotechnology

Interface Engineering of Imidazolium Ionic Liquids toward Efficient and Stable CsPbBr3 Perovskite Solar Cells

Wenyu Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Toward High-Performance Electron/Hole-Transporting-Layer-Free, Self-Powered CsPbIBr2 Photodetectors via Interfacial Engineering

Zeyulin Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Physical

Inorganic Halide Perovskite Solar Cells: Progress and Challenges

Jingjing Tian et al.

ADVANCED ENERGY MATERIALS (2020)

Article Nanoscience & Nanotechnology

Modulating Performance and Stability of Inorganic Lead-Free Perovskite Solar Cells via Lewis-Pair Mediation

Anupriya Singh et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

CsPbI2Br Perovskite Solar Cells Based on Carbon Black-Containing Counter Electrodes

Shuiping Gong et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Composition Engineering of All-Inorganic Perovskite Film for Efficient and Operationally Stable Solar Cells

Jingjing Tian et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

PEG Modified CsPbIBr2 Perovskite Film for Efficient and Stable Solar Cells

Yibo You et al.

ADVANCED MATERIALS INTERFACES (2020)

Article Nanoscience & Nanotechnology

Multifunctional Self-Combustion Additives Strategy to Fabricate Highly Responsive Hybrid Perovskite Photodetectors

Sunihl Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Analytical

Additive Modulated Perovskite Microstructures for High Performance Photodetectors

Zhan Gao et al.

MICROMACHINES (2020)

Article Materials Science, Multidisciplinary

Photo-switchable electron-transporting layers for self-driven perovskite photodetectors towards high detectivity

Qinglei Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Materials Science, Multidisciplinary

Advances in perovskite photodetectors

Chenglong Li et al.

INFOMAT (2020)

Article Chemistry, Physical

Acetate-Based Crystallization Kinetics Modulation of CsPbI2Br for Improved Photovoltaic Performance

Linfeng Ye et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Tailoring Passivation Molecular Structures for Extremely Small Open-Circuit Voltage Loss in Perovskite Solar Cells

Shuang Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Materials Science, Multidisciplinary

A High Mobility Conjugated Polymer Enables Air and Thermally Stable CsPbI2Br Perovskite Solar Cells with an Efficiency Exceeding 15%

Huan Zhao et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Article Nanoscience & Nanotechnology

High-Rubidium Formamidinium-Ratio Perovskites for High Performance Photodetection with Enhanced Stability

Fang Yao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Materials Science, Multidisciplinary

TBAB additive for inorganic CsPbI2.4Br0.6 perovskite solar cells with efficiency beyond 15%

Xue Jia et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Review Materials Science, Multidisciplinary

Recent progress in organometal halide perovskite photodetectors

Xingguang Wang et al.

ORGANIC ELECTRONICS (2018)

Article Chemistry, Physical

Efficient Inorganic Perovskite Light-Emitting Diodes with Polyethylene Glycol Passivated Ultrathin CsPbBr3 Films

Li Song et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Review Chemistry, Multidisciplinary

Lewis Acid-Base Adduct Approach for High Efficiency Perovskite Solar Cells

Jin-Wook Lee et al.

ACCOUNTS OF CHEMICAL RESEARCH (2016)