☆ 4.6 Article

Multi-objective optimisation of aluminium skins and recycled/perforated PET foams sandwich panels subjected to impact loads

STRUCTURES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Bending response of sandwich panels with steel skins and aluminium foam core Nominated for Eurosteel 2021 Best Paper Award

Massimo Latour et al.

Summary: The introduction of metal foams in the construction market presents an opportunity to increase the utilization of metal. The development of metal foam and steel composites can enhance the performance of conventional buildings. This paper aims to assess the response of composite sandwich panels made of steel and aluminium foam, laying the foundation for a new system of dry-assembled composite floors.

STEEL CONSTRUCTION-DESIGN AND RESEARCH (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Flexural property evaluation of web reinforced GFRP-PET foam sandwich panel: Experimental study and numerical simulation

Honglei Xie et al.

Summary: This study focused on the flexural property of PET foam-filled lattice composite sandwich panels under four-point bending. Increasing the thickness of face sheet and PET foam can effectively improve the ultimate load of the panels. Experimental results and theoretical predictions showed errors within 10% for bending stiffness and ultimate load.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

In situ L-RTM manufacturing of sandwich panels with PET foam core reinforced by polymeric pins

Rafael de Avila Delucis et al.

Summary: This study investigates a novel methodology for manufacturing sandwich panels using in situ light resin transfer molding, where poly(ethylene terephthalate) foam cores are reinforced with transverse polymeric pins. Experimental and numerical results show good agreement, with pin diameters below 3 mm leading to failure by local buckling and diameters larger than 4 mm causing manufacturing issues related to incomplete pin formation.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Large deformation of corrugated sandwich panels under three-point bending

Fukun Xia et al.

Summary: Corrugated sandwich panels are widely used in engineering applications due to their excellent energy absorption and lightweight properties. This research investigates the mechanical response of aluminum corrugated sandwich panels under three-point bending through experimental, numerical, and theoretical methods. Parametric studies using ABAQUS/explicit show that geometric configurations have significant effects on the deformation mode, peak force, and energy absorption of the panels.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties and energy absorption capabilities of aluminium foam sandwich structure subjected to low-velocity impact

Ying Zhao et al.

Summary: This study investigates the dynamic behaviors, deformation and damage mechanisms, and energy absorption of aluminium foam sandwich structures subjected to low-velocity impact. Experimental and numerical analyses were conducted to evaluate the influences of face sheet thickness, core height, and density on the performance of energy absorption. The results show that the combination of impact energy and energy absorption indicators play a crucial role in the optimal design of sandwich structures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimized epoxy foam interface of CFRP/Epoxy Foam/CFRP sandwich composites for improving compressive and impact properties

Dong-Jun Kwon et al.

Summary: This study investigated the optimal manufacturing conditions of epoxy foam to enhance the mechanical performance of carbon fiber reinforced plastic sandwich composites for vehicle parts. The study found that the foam cured at 60 degrees Celsius exhibited the most stable properties after thermal aging at 180 degrees Celsius. The performance of the sandwich composites was improved by optimizing the cell condition of the foam.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Engineering, Civil

Experimental and numerical study of double-skin aluminium foam sandwich panels in bending

Massimo Latour et al.

Summary: Metal foams are engineered materials with attractive mechanical properties, mainly used in aeronautic and mechanical engineering. The study assessed the performance of double-skin composite sandwich panels made of steel sheets and aluminium foam for civil engineering applications, showing the effectiveness of the proposed type of sandwich panel and providing simple design equations for predicting stiffness and strength.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Optimal design of a novel cylindrical sandwich panel with double arrow auxetic core under air blast loading

Xu-ke Lan et al.

DEFENCE TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Civil

Experimental and numerical studies on the ballistic impact response of titanium sandwich panels with different facesheets thickness ratios

Amirmasoud Rahimijonoush et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Construction & Building Technology

Multi-objective optimization of pultruded composite sandwich panels for building floor rehabilitation

M. Garrido et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Civil

Theoretical and numerical crush analysis of multi-stage nested aluminium alloy tubular structures under axial impact loading

TrongNhan Tran et al.

ENGINEERING STRUCTURES (2019)

添加到收藏夹

Article Mechanics

Low-velocity impact responses and CAI properties of synthetic foam sandwiches

Jun Wang et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Review Green & Sustainable Science & Technology

Current developments in chemical recycling of post-consumer polyethylene terephthalate wastes for new materials production: A review

Ademola Bolanle Raheem et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental research on damage characteristics of CFRP/aluminum foam sandwich structure subjected to high velocity impact

Enling Tang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Chemistry, Physical

Experimental study on the quasi-static compression behavior of multilayer aluminum foam sandwich structure

Cheng-Xu Ren et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Engineering, Civil

Investigations on sustainable honeycomb sandwich panels containing eucalyptus sawdust, Piassava and cement particles

Jezrael Rossetti Dutra et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Acoustics

Vibro-acoustic response of a clamped rectangular sandwich panel in thermal environment

Xiangyang Li et al.

APPLIED ACOUSTICS (2018)

添加到收藏夹

Article Mechanics

Experimental investigation of composite pyramidal truss core sandwich panels with lightweight inserts

Ge Qi et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Design of the corrugated-core sandwich panel with external active cooling system

S. A. Lurie et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Experimental investigation on the dynamic behaviour of aluminum foam sandwich plate under repeated impacts

Kailing Guo et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Construction & Building Technology

Dynamic mechanical analysis and effects of moisture on mechanical properties of interwoven hemp/polyethylene terephthalate (PET) hybrid composites

M. A. A. Ahmad et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Civil

Sustainable sandwich structures made from bottle caps core and aluminium skins: A statistical approach

Pablo Resende Oliveira et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Chemical

Comparison of cohesive zone and continuum damage approach in predicting the static failure of adhesively bonded single lap joints

Sugiman Sugiman et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Mechanics

Identification of material properties of composite sandwich panels under geometric uncertainty

Samy Missoum et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic crash responses of bio-inspired aluminum honeycomb sandwich structures with CFRP panels

Yinghan Wu et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Polymer Science

Flexible polyurethane foams formulated with polyols derived from waste carbon dioxide

Mica DeBolt et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

添加到收藏夹

Article Engineering, Civil

Multi-objective optimization of laser-welded steel sandwich panels for static loads using a genetic algorithm

Jeffrey D. Poirier et al.

ENGINEERING STRUCTURES (2013)

添加到收藏夹

Article Engineering, Civil

Numerical simulation of anisotropic polymeric foams

Volnei Tita et al.

Latin American Journal of Solids and Structures (2013)

添加到收藏夹

Article Materials Science, Composites

The low velocity impact response of foam-based sandwich panels

Jin Zhou et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Materials Science, Characterization & Testing

The effect of post-consumer PET particles on the performance of flexible polyurethane foams

Darlan de Mello et al.

POLYMER TESTING (2009)

添加到收藏夹

Review Chemistry, Applied

New epoxy resins based on recycled poly(ethylene terephthalate) as organic coatings

Ayman M. Atta et al.

PROGRESS IN ORGANIC COATINGS (2007)

添加到收藏夹

Article Polymer Science

Thermal stability and fire properties of conventional flexible polyurethane foam formulations

J Lefebvre et al.

POLYMER DEGRADATION AND STABILITY (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.