相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effects of redispersible polymer powders on the structural build-up of 3D printing cement paste with and without hydroxypropyl methylcellulose
Yi Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Designing 3D printable cementitious materials with gel-forming polymers
Hajar Taheri Afarani et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Environmental and economic assessment on 3D printed buildings with recycled concrete
Yilong Han et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Assessment of asymmetrical rheological behavior of cementitious material for 3D printing application
Yohan Jacquet et al.
CEMENT AND CONCRETE RESEARCH (2021)
Vibration induced active rheology control for 3D concrete printing
J. G. Sanjayan et al.
CEMENT AND CONCRETE RESEARCH (2021)
Improving performance of additive manufactured (3D printed) concrete: A review on material mix design, processing, interlayer bonding, and reinforcing methods
Shanaka Kristombu Baduge et al.
STRUCTURES (2021)
From casting to 3D printing geopolymers: A proof of concept
Vera Voney et al.
CEMENT AND CONCRETE RESEARCH (2021)
Structural behaviour of 3D printed concrete beams with various reinforcement strategies
Lukas Gebhard et al.
ENGINEERING STRUCTURES (2021)
Mesh reinforcing method for 3D Concrete Printing
Taylor Marchment et al.
AUTOMATION IN CONSTRUCTION (2020)
Direct printing test for buildability of 3D-printable concrete considering economic viability
Venkatesh Naidu Nerella et al.
AUTOMATION IN CONSTRUCTION (2020)
3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse
Jacques Kruger et al.
COMPOSITES PART B-ENGINEERING (2020)
Effect of the printing method and mortar's workability on pull-out strength of 3D printed elements
Bilal Baz et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
On-demand additive manufacturing of functionally graded concrete
Z. Y. Ahmed et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Possibilities and challenges of constant shear rate test for evaluation of structural build-up rate of cementitious materials
I. Ivanova et al.
CEMENT AND CONCRETE RESEARCH (2020)
Rheological parameters, thixotropy and creep of 3D-printed calcium sulfoaluminate cement composites modified by bentonite
Mingxu Chen et al.
COMPOSITES PART B-ENGINEERING (2020)
Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to different loading conditions
Zhijian Li et al.
COMPOSITES PART B-ENGINEERING (2020)
Real-time quantification of fresh and hardened mechanical property for 3D printing material by intellectualization with piezoelectric transducers
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Nailing of Layers: A Promising Way to Reinforce Concrete 3D Printing Structures
A. Perrot et al.
MATERIALS (2020)
Modelling and parameter optimization for filament deformation in 3D cementitious material printing using support vector machine
Zhixin Liu et al.
COMPOSITES PART B-ENGINEERING (2020)
Reinforcing effects of 3D printed bolts on joint-separated standard soft rock specimens
Xiaowei Feng et al.
COMPOSITES PART B-ENGINEERING (2020)
Mechanical behavior of 3D printed mortar with recycled sand at early ages
Tao Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up
Mingxu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing
Yu Chen et al.
CEMENT & CONCRETE COMPOSITES (2020)
Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP)
Harald Kloft et al.
CEMENT AND CONCRETE RESEARCH (2020)
A process classification framework for defining and describing Digital Fabrication with Concrete
R. A. Buswell et al.
CEMENT AND CONCRETE RESEARCH (2020)
Opportunities and challenges for structural engineering of digitally fabricated concrete
Costantino Menna et al.
CEMENT AND CONCRETE RESEARCH (2020)
On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
Victor C. Li et al.
CEMENT AND CONCRETE RESEARCH (2020)
Innovating materials for large scale additive manufacturing: Salt, soil, cement and chardonnay
Virginia San Fratello et al.
CEMENT AND CONCRETE RESEARCH (2020)
Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture
Yu Chen et al.
CEMENT AND CONCRETE RESEARCH (2020)
Extrusion-based additive manufacturing with cement-based materials - Production steps, processes, and their underlying physics: A review
V Mechtcherine et al.
CEMENT AND CONCRETE RESEARCH (2020)
Sheet and network based functionally graded lattice structures manufactured by selective laser melting: Design, mechanical properties, and simulation
Hailun Zhou et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
A critical examination of the influence of material characteristics and extruder geometry on 3D printing of cementitious binders
Sooraj A. O. Nair et al.
CEMENT & CONCRETE COMPOSITES (2020)
CCR Digital Concrete 2020 SI: Editorial
Freek Bos et al.
CEMENT AND CONCRETE RESEARCH (2020)
Elastic buckling and plastic collapse during 3D concrete printing
A. S. J. Suiker et al.
CEMENT AND CONCRETE RESEARCH (2020)
Mechanical assessment of concrete - Steel bonding in 3D printed elements
Bilal Baz et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
3D-printable lightweight foamed concrete and comparison with classical foamed concrete in terms of fresh state properties and mechanical strength
Devid Falliano et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete: Concept and Feasibility Study
Viktor Mechtcherine et al.
MATERIALS (2020)
Environmental assessment of large-scale 3D printing in construction: A comparative study between cob and concrete
Hashem Alhumayani et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Modelling of 3D concrete printing based on computational fluid dynamics
Raphael Comminal et al.
CEMENT AND CONCRETE RESEARCH (2020)
Evaluation of Early-Age Concrete Structural Build-Up for 3D Concrete Printing by Oscillatory Rheometry
Wilson Ricardo Leal da Silva et al.
ADVANCES IN ADDITIVE MANUFACTURING, MODELING SYSTEMS AND 3D PROTOTYPING (2020)
The Viability and Simplicity of 3D-Printed Construction: A Military Case Study
Jenee Jagoda et al.
INFRASTRUCTURES (2020)
Influence of supplementary cementitious materials on rheological properties of 3D printed fly ash based geopolymer
Xiaolu Guo et al.
CEMENT & CONCRETE COMPOSITES (2020)
Criteria development for sustainable construction manufacturing in Construction Industry 4.0 Theoretical and laboratory investigations
Faham Tahmasebinia et al.
CONSTRUCTION INNOVATION-ENGLAND (2020)
A printability index for linking slurry rheology to the geometrical attributes of 3D-printed components
Sabrina Ketel et al.
CEMENT & CONCRETE COMPOSITES (2019)
Simulating mixing processes of fresh concrete using the discrete element method (DEM) under consideration of water addition and changes in moisture distribution
Knut Krenzer et al.
CEMENT AND CONCRETE RESEARCH (2019)
Inline quantification of extrudability of cementitious materials for digital construction
V. N. Nerella et al.
CEMENT & CONCRETE COMPOSITES (2019)
3D printable concrete: Mixture design and test methods
A. V. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2019)
Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing
Zhixin Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Influence of intensity & eccentricity of posttensioning force and concrete strength on shear behavior of epoxied joints in segmental box girder bridges
Ghafur H. Ahmed et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Rheological and harden properties of the high-thixotropy 3D printing concrete
Yu Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application
Biranchi Panda et al.
MATERIALS LETTERS (2019)
Rheological Property Criteria for Buildable 3D Printing Concrete
Hoseong Jeong et al.
MATERIALS (2019)
A novel method to enhance the interlayer bonding of 3D printing concrete: An experimental and computational investigation
Ehsan Hosseini et al.
CEMENT & CONCRETE COMPOSITES (2019)
Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2019)
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
Venkatesh Naidu Nerella et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
Biranchi Panda et al.
JOURNAL OF CLEANER PRODUCTION (2019)
The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
Yu Chen et al.
MATERIALS (2019)
A 3D Printed Ready-Mixed Concrete Power Distribution Substation: Materials and Construction Technology
Guangchao Ji et al.
MATERIALS (2019)
Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development
Yu Chen et al.
APPLIED SCIENCES-BASEL (2019)
Insights into material design, extrusion rheology, and properties of 3D-printable alkali-activated fly ash-based binders
Hussam Alghamdi et al.
MATERIALS & DESIGN (2019)
Properties of concrete elements with 3-D printed formworks which substitute steel reinforcement
Jacek Katzer et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agent
Bing Lu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Structural failure during extrusion-based 3D printing processes
R. J. M. Wolfs et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Volume-forming 3D concrete printing using a variable-size square nozzle
Jie Xe et al.
AUTOMATION IN CONSTRUCTION (2019)
Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin
Emmanuel Keita et al.
CEMENT AND CONCRETE RESEARCH (2019)
Digital Concrete: A Review
Timothy Wangler et al.
CEMENT AND CONCRETE RESEARCH (2019)
Compression Field Analysis of Fiber-Reinforced Concrete Based on the Cracked Membrane Model
Waiter Kaufmann et al.
ACI STRUCTURAL JOURNAL (2019)
Large-scale digital concrete construction-CONPrint3D concept for on-site, monolithic 3D-printing
Viktor Mechtcherine et al.
AUTOMATION IN CONSTRUCTION (2019)
Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content
Chao Zhang et al.
CEMENT & CONCRETE COMPOSITES (2019)
Development of strain hardening cementitious composite (SHCC) reinforced with 3D printed polymeric reinforcement: Mechanical properties
Yading Xu et al.
COMPOSITES PART B-ENGINEERING (2019)
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete
Jacques Kruger et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Microstructural Characterization of 3D Printed Cementitious Materials
Jolien Van Der Putten et al.
MATERIALS (2019)
Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction
Binrong Zhu et al.
MATERIALS & DESIGN (2019)
Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction
V. N. Nerella et al.
CEMENT AND CONCRETE RESEARCH (2019)
Linking fresh paste microstructure, rheology and extrusion characteristics of cementitious binders for 3D printing
Sooraj A. O. Nair et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
3D House Printing: A sustainable housing solution for Nigeria's housing needs
A. O. Afolabi et al.
3RD INTERNATIONAL CONFERENCE ON SCIENCE AND SUSTAINABLE DEVELOPMENT (ICSSD 2019): SCIENCE, TECHNOLOGY AND RESEARCH: KEYS TO SUSTAINABLE DEVELOPMENT (2019)
Time gap effect on bond strength of 3D-printed concrete
Yi Wei Daniel Tay et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
The Effect of Print Parameters on the (Micro) structure of 3D Printed Cementitious Materials
J. Van Der Putten et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications
Ming Xia et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Challenges of Real-Scale Production with Smart Dynamic Casting
E. Lloret-Fritschi et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures
J. Mata-Falcon et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Rheological Control of 3D Printable Cement Paste and Mortars
Scott Z. Jones et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Large Scale Testing of Digitally Fabricated Concrete (DFC) Elements
Freek Bos et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Ductility of 3D printed concrete reinforced with short straight steel fibers
F. P. Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
State-of-the-art of 3D printing technology of cementitious material-An emerging technique for construction
GuoWei Ma et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)
A critical review of preparation design and workability measurement of concrete material for largescale 3D printing
Guowei Ma et al.
FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2018)
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Suvash Chandra Paul et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
Applications of additive manufacturing in the construction industry - A forward-looking review
Daniel Delgado Camacho et al.
AUTOMATION IN CONSTRUCTION (2018)
A self-reinforced cementitious composite for building-scale 3D printing
Daniel G. Soltan et al.
CEMENT & CONCRETE COMPOSITES (2018)
Multi-scale investigation of microstructure, fiber pullout behavior, and mechanical properties of ultra-high performance concrete with nano-CaCO3 particles
Zemei Wu et al.
CEMENT & CONCRETE COMPOSITES (2018)
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2018)
3D printing using concrete extrusion: A roadmap for research
R. A. Buswell et al.
CEMENT AND CONCRETE RESEARCH (2018)
Concrete material science: Past, present, and future innovations
Henri Van Damme
CEMENT AND CONCRETE RESEARCH (2018)
Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
Delphine Marchon et al.
CEMENT AND CONCRETE RESEARCH (2018)
Rethinking reinforcement for digital fabrication with concrete
Domenico Asprone et al.
CEMENT AND CONCRETE RESEARCH (2018)
Rheological requirements for printable concretes
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2018)
The role of early age structural build-up in digital fabrication with concrete
Lex Reiter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Investigation of the calcined kaolinite content on the hydration of Limestone Calcined Clay Cement (LC3)
Francois Avet et al.
CEMENT AND CONCRETE RESEARCH (2018)
Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
Biranchi Panda et al.
CERAMICS INTERNATIONAL (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Fresh properties of a novel 3D printing concrete ink
Yu Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Virtual Sliding Pipe Rheometer for estimating pumpability of concrete
Venkatesh Naidu Nerella et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
Jian Hui Lim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
3D printing of reinforced concrete elements: Technology and design approach
Domenico Asprone et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
3D-printed steel reinforcement for digital concrete construction - Manufacture, mechanical properties and bond behaviour
Viktor Mechtcherine et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
A novel lightweight cementitious composite with enhanced thermal insulation and mechanical properties by extrusion technique
Zeyu Lu et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of surface moisture on inter-layer strength of 3D printed concrete
Jay G. Sanjayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments
A. S. J. Suiker
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Effects of mixture ingredients on extrudability of concrete in Contour Crafting
Babak Zareiyan et al.
RAPID PROTOTYPING JOURNAL (2018)
Mechanical characterization of 3D printed anisotropic cementitious material by the electromechanical transducer
Guowei Ma et al.
SMART MATERIALS AND STRUCTURES (2018)
Electromagnetic and microwave absorbing properties of cementitious composite for 3D printing containing waste copper solids
Guowei Ma et al.
CEMENT & CONCRETE COMPOSITES (2018)
Particle-bed 3D printing in concrete construction - Possibilities and challenges
Dirk Lowke et al.
CEMENT AND CONCRETE RESEARCH (2018)
Vision of 3D printing with concrete - Technical, economic and environmental potentials
Geert De Schutter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Biranchi Panda et al.
CEMENT & CONCRETE COMPOSITES (2018)
Calcined clay limestone cements (LC3)
Karen Scrivener et al.
CEMENT AND CONCRETE RESEARCH (2018)
Characteristic of materials for the 3D printed building constructions by additive printing
Katarzyna Pacewicz et al.
3RD INTERNATIONAL WORKSHOP ON FLEXIBILITY IN SUSTAINABLE CONSTRUCTION (ORSDCE 2018) (2018)
Design of a 3D printed concrete bridge by testing
Theo A. M. Salet et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Towards understanding the influence of porosity on mechanical and fracture behaviour of quasi-brittle materials: experiments and modelling
Dong Liu et al.
INTERNATIONAL JOURNAL OF FRACTURE (2017)
Potential benefits of digital fabrication for complex structures: Envitonmental assessment of a robotically fabricated concrete-wall
Isolda Agusti-Juan et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Additive manufacturing of geopolymer for sustainable built environment
Biranchi Panda et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Blended Cements with Limestone Filler and Kaolinitic Calcined Clay: Filler and Pozzolanic Effects
Alejandra Tironi et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Biranchi Panda et al.
MATERIALS LETTERS (2017)
3D printing: Printing precision and application in food sector
Zhenbin Liu et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2017)
Functionally graded concrete: Numerical design methods and experimental tests of mass-optimized structural components
Michael Herrmann et al.
STRUCTURAL CONCRETE (2017)
Effect of replacement of silica fume with calcined clay on the hydration and microstructural development of eco-UHPFRC
Wei Huang et al.
MATERIALS & DESIGN (2017)
3D Printing of Buildings: Construction of the Sustainable Houses of the Future by BIM
Mehmet Sakin et al.
SUSTAINABILITY IN ENERGY AND BUILDINGS 2017 (2017)
Purview of 3DP in the Indian Built Environment Sector
Taqdees Anjum et al.
CREATIVE CONSTRUCTION CONFERENCE 2017, CCC 2017 (2017)
3D printing trends in building and construction industry: a review
Yi Wei Daniel Tay et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Assessment of pore structure evolution in the limestone calcined clay cementitious system and its implications for performance
Yuvaraj Dhandapani et al.
CEMENT & CONCRETE COMPOSITES (2017)
Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Babak Zareiyan et al.
AUTOMATION IN CONSTRUCTION (2017)
Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete
Freek P. Bos et al.
MATERIALS (2017)
Modelling of paste ram extrusion subject to liquid phase migration and wall friction
M. J. Patel et al.
CHEMICAL ENGINEERING SCIENCE (2017)
A design tool for resource-efficient fabrication of 3d-graded structural building components using additive manufacturing
F. Craveiro et al.
AUTOMATION IN CONSTRUCTION (2017)
Influence of the rheological properties of SCC on the formwork pressure
Michal P. Drewniok et al.
12TH INTERNATIONAL SCIENTIFIC CONFERENCE OF YOUNG SCIENTISTS ON SUSTAINABLE, MODERN AND SAFE TRANSPORT (2017)
Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture
Ali Kazemian et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Non-linear elastic response of layered structures, alternating pentamode lattices and confinement plates
A. Amendola et al.
COMPOSITES PART B-ENGINEERING (2017)
3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide
Jing Zhong et al.
CARBON (2017)
Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing
Pshtiwan Shakor et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Properties of 3D-printed fiber-reinforced Portland cement paste
Manuel Hambach et al.
CEMENT & CONCRETE COMPOSITES (2017)
Microstructure, electrical and mechanical properties of steel fibres reinforced cement mortars with partial metakaolin and limestone addition
Graciela Lopez Alvarez et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
A. Perrot et al.
MATERIALS AND STRUCTURES (2016)
Additive construction: State-of-the-art, challenges and opportunities
Nathalie Labonnote et al.
AUTOMATION IN CONSTRUCTION (2016)
A critical review of the use of 3-D printing in the construction industry
Peng Wu et al.
AUTOMATION IN CONSTRUCTION (2016)
Surface roughness effects on the reinforcement of cement mortars through 3D printed metallic fibers
Ilenia Farina et al.
COMPOSITES PART B-ENGINEERING (2016)
On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers
I. Farina et al.
COMPOSITES PART B-ENGINEERING (2016)
Effect of nano and micro-silica on bond behaviour of steel and polypropylene fibres in high volume fly ash mortar
F. U. A. Shaikh et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Adaptation of the standard EN 196-1 for mortar with accelerator
Isaac Galobardes et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effects of superplasticizers and retarders on the fluidity and strength of sulphoaluminate cement
Ge Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Large-scale 3D printing of ultra-high performance concrete - a new processing route for architects and builders
C. Gosselin et al.
MATERIALS & DESIGN (2016)
Method of formulating geopolymer for 3D printing for construction applications
Ming Xia et al.
MATERIALS & DESIGN (2016)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Failure Analysis and Anisotropy Evaluation of 3D-Printed Tensile Test Specimens of Different Geometries and Print Raster Patterns
Angel R. Torrado et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2016)
Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering
Arghavan Farzadi et al.
CERAMICS INTERNATIONAL (2015)
Influence of silica fume and viscosity modifying agent on the mechanical and rheological behavior of self compacting concrete
Mouhcine Benaicha et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Effects of nano-silica and nano-limestone on flowability and mechanical properties of ultra-high-performance concrete matrix
Wengui Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Mechanical properties of structures 3D printed with cementitious powders
Peng Feng et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Fiber reinforcement during 3D printing
Susanne Christ et al.
MATERIALS LETTERS (2015)
Powder-bed-based 3D-printing of function integrated parts
Johannes Glasschroeder et al.
RAPID PROTOTYPING JOURNAL (2015)
An experimental investigation of the thermal spalling of polypropylene-fibered reactive powder concrete exposed to elevated temperatures
Yang Ju et al.
SCIENCE BULLETIN (2015)
Role of water/cement ratio on strength development of cement mortar
S. B. Singh et al.
JOURNAL OF BUILDING ENGINEERING (2015)
Building components for an outpost on the Lunar soil by means of a novel 3D printing technology
Giovanni Cesaretti et al.
ACTA ASTRONAUTICA (2014)
Effect of Layer Thickness and Printing Orientation on Mechanical Properties and Dimensional Accuracy of 3D Printed Porous Samples for Bone Tissue Engineering
Arghavan Farzadi et al.
PLOS ONE (2014)
Concrete mix design based on water film thickness and paste film thickness
Leo G. Li et al.
CEMENT & CONCRETE COMPOSITES (2013)
The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash
Kirk Vance et al.
CEMENT AND CONCRETE RESEARCH (2013)
Optimisation of rheological parameters and mechanical properties of superplasticised cement grouts containing metakaolin and viscosity modifying admixture
M. Sonebi et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Effect of different types of superplasticizer on fresh, rheological and strength properties of self-consolidating concrete
Ali Mardani-Aghabaglou et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Extrusion Process Modeling for Aqueous-Based Ceramic Pastes-Part 1: Constitutive Model
Mingyang Li et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Effect of nano-calcium carbonate on early-age properties of ultra-high-performance concrete
Jessica Camiletti et al.
MAGAZINE OF CONCRETE RESEARCH (2013)
Prediction of extrusion load and liquid phase filtration during ram extrusion of high solid volume fraction pastes
H. Khelifi et al.
POWDER TECHNOLOGY (2013)
Compound fabrication: A multi-functional robotic platform for digital design and fabrication
Steven Keating et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2013)
Developments in construction-scale additive manufacturing processes
S. Lim et al.
AUTOMATION IN CONSTRUCTION (2012)
Cement substitution by a combination of metakaolin and limestone
M. Antoni et al.
CEMENT AND CONCRETE RESEARCH (2012)
Hardened properties of high-performance printing concrete
T. T. Le et al.
CEMENT AND CONCRETE RESEARCH (2012)
The origins of thixotropy of fresh cement pastes
N. Roussel et al.
CEMENT AND CONCRETE RESEARCH (2012)
Effects of two retarders on the fluidity of pastes plasticized with aminosulfonic acid-based superplasticizers
Li Guoxin et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Compatibility between superplasticizer admixtures and cements with mineral additions
Olga Burgos-Montes et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes
Erhan Guneyisi et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Properties of fresh and hardened concrete
Konstantin Kovler et al.
CEMENT AND CONCRETE RESEARCH (2011)
Rheology and vibration of fresh concrete: Predicting the radius of action of poker vibrators from wave propagation
P. F. G. Banfill et al.
CEMENT AND CONCRETE RESEARCH (2011)
Three-dimensional printing of flash-setting calcium aluminate cement
Anne-Kathrin Maier et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Inkjet Printing-Process and Its Applications
Madhusudan Singh et al.
ADVANCED MATERIALS (2010)
3D Printing of cement composites
G. J. Gibbons et al.
ADVANCES IN APPLIED CERAMICS (2010)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Effect of mineral admixtures on formwork pressure of self-consolidating concrete
Jae Hong Kim et al.
CEMENT & CONCRETE COMPOSITES (2010)
Steady state flow of cement suspensions: A micromechanical state of the art
Nicolas Roussel et al.
CEMENT AND CONCRETE RESEARCH (2010)
Influence of clays on the rheology of cement pastes
Nathan A. Tregger et al.
CEMENT AND CONCRETE RESEARCH (2010)
Exploring the potential of functionally graded materials concept for the development of fiber cement
C. M. R. Dias et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
NUMERICAL SIMULATION OF RAM EXTRUSION IN SHORT-FIBER-REINFORCED FRESH CEMENTITIOUS COMPOSITES
Xiangming Zhou et al.
JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES (2009)
Effects of packing density, excess water and solid surface area on flowability of cement paste
A. K. H. Kwan et al.
ADVANCES IN CEMENT RESEARCH (2008)
Design, data and process issues for mega-scale rapid manufacturing machines used for construction
R. A. Buswell et al.
AUTOMATION IN CONSTRUCTION (2008)
Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity
Nicolas Robeyst et al.
CEMENT AND CONCRETE RESEARCH (2008)
Performance of self-compacting concrete containing fly ash
J. M. Khatib
CONSTRUCTION AND BUILDING MATERIALS (2008)
Rheology of fresh concrete: from measurements to predictions of casting processes
Nicolas Roussel
MATERIALS AND STRUCTURES (2007)
Mesomechanism of steel fiber reinforcement and toughening of reactive powder concrete
Ju Yang et al.
SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES (2007)
Cable-suspended robotic contour crafting system
Paul Bosscher et al.
AUTOMATION IN CONSTRUCTION (2007)
A case history: Effect of moisture on the setting behaviour of a Portland cement reacting with an alkali-free accelerator
C. Maltese et al.
CEMENT AND CONCRETE RESEARCH (2007)
The effect of viscosity modifying agents on mortar and concrete
Andreas Leemann et al.
CEMENT & CONCRETE COMPOSITES (2007)
Freeform construction: Mega-scale rapid manufacturing for construction
R. A. Buswell et al.
AUTOMATION IN CONSTRUCTION (2007)
Efficient cooling with tool inserts manufactured by electron beam melting
L-E. Rannar et al.
RAPID PROTOTYPING JOURNAL (2007)
Computational modeling of concrete flow: General overview
Nicolas Roussel et al.
CEMENT AND CONCRETE RESEARCH (2007)
Green and early age compressive strength of extruded cement mortar monitored with compression tests and ultrasonic techniques
Thomas Voigt et al.
CEMENT AND CONCRETE RESEARCH (2006)
Bamboo - A functionally graded composite-correlation between microstructure and mechanical strength
AK Ray et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Synthesis and evaluation of shrinkage-reducing admixture for cementitious materials
B Rongbing et al.
CEMENT AND CONCRETE RESEARCH (2005)
Performance of new viscosity modifying admixtures in enhancing the rheological properties of cement paste
M Lachemi et al.
CEMENT AND CONCRETE RESEARCH (2004)
Automated construction by contour crafting - related robotics and information technologies
B Khoshnevis
AUTOMATION IN CONSTRUCTION (2004)
Effect of silica fume on mechanical properties of high-strength concrete
M Mazloom et al.
CEMENT & CONCRETE COMPOSITES (2004)
Effect of particle size distribution of fly ash-cement system on the fluidity of cement pastes
SH Lee et al.
CEMENT AND CONCRETE RESEARCH (2003)
Development of a self-consolidating engineered cementitious composite employing electrosteric dispersion/stabilization
HJ Kong et al.
CEMENT & CONCRETE COMPOSITES (2003)
A model describing liquid phase migration within an extruding microcrystalline cellulose paste
SL Rough et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2002)
Enhanced crack-bridging by unbonded inclusions in a brittle matrix
HW Chandler et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2002)
Microstructure of extruded cement-bonded fiberboard
YX Shao et al.
CEMENT AND CONCRETE RESEARCH (2001)
The influence of alkali-free and alkaline shotcrete accelerators within cement systems I.: Characterization of the setting behavior
C Paglia et al.
CEMENT AND CONCRETE RESEARCH (2001)
The influence of mineral admixtures on the theology of cement paste and concrete
CF Ferraris et al.
CEMENT AND CONCRETE RESEARCH (2001)
Experimental investigation of contour crafting using ceramics materials
B Khoshnevis et al.
RAPID PROTOTYPING JOURNAL (2001)
Physical and numerical modelling of ram extrusion of paste materials: conical die entry case
I Aydin et al.
COMPUTATIONAL MATERIALS SCIENCE (2000)
分享论文
