相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A line-based flash heating method for numerical modeling and prediction of directed energy deposition manufacturing process
Jingsheng Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2022)
Topology optimization of the support structure for heat dissipation in additive manufacturing
Takao Miki et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2022)
A novel application framework for self-supporting topology optimization
Dengyang Zhao et al.
VISUAL COMPUTER (2021)
Dynamic response optimization of structures with viscoelastic material using the equivalent static loads method
Sang-ok Park et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2021)
Accessibility of support structures in topology optimization for additive manufacturing
Emiel van de Ven et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2021)
Concurrent high-resolution topology optimization of structures and their supports for additive manufacturing
Eilam Amir et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)
A dimensionless number for predicting universal processing parameter boundaries in metal powder bed additive manufacturing
Behzad Rankouhi et al.
MANUFACTURING LETTERS (2021)
Build optimization of fiber-reinforced additively manufactured components
Aaditya Chandrasekhar et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)
Bio-inspired generative design for support structure generation and optimization in Additive Manufacturing (AM)
Yicha Zhang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)
Topology optimization of support structure layout in metal-based additive manufacturing accounting for thermal deformations
Jeroen Pellens et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)
Topology optimization of lattice support structures for heat conduction in selective laser melting
Renkai Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A Review of Methods for the Geometric Post-Processing of Topology Optimized Models
Subodh C. Subedi et al.
JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING (2020)
Residual stress of typical parts in laser powder bed fusion
Changpeng Chen et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Simulation and validation of residual deformations in additive manufacturing of metal parts
Thomas Mayer et al.
HELIYON (2020)
Overhang constraint for topology optimization of self-supported compliant mechanisms considering additive manufacturing
Alain Garaigordobil et al.
COMPUTER-AIDED DESIGN (2019)
Genetic-algorithm based framework for lattice support structure optimization in additive manufacturing
Benjamin Vaissier et al.
COMPUTER-AIDED DESIGN (2019)
Novel approach to optimized support structures in laser beam melting by combining process simulation with topology optimization
Katharina Bartsch et al.
JOURNAL OF LASER APPLICATIONS (2019)
Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting
Amal Charles et al.
APPLIED SCIENCES-BASEL (2019)
Topology optimization of thermal conductive support structures for laser additive manufacturing
Mingdong Zhou et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Determination of optimal build orientation for additive manufacturing using Muirhead mean and prioritised average operators
Yuchu Qin et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2019)
Analytical Thermal Modeling of Metal Additive Manufacturing by Heat Sink Solution
Jinqiang Ning et al.
MATERIALS (2019)
Generation of a tree-like support structure for fused deposition modelling based on the L-system and an octree
Yong Zhou et al.
GRAPHICAL MODELS (2019)
Generating support structures for additive manufacturing with continuum topology optimization methods
Yang Liu et al.
RAPID PROTOTYPING JOURNAL (2019)
Influence of Support Configurations on the Characteristics of Selective Laser-Melted Inconel 718
Naresh Nadammal et al.
JOM (2018)
Support structure design in additive manufacturing based on topology optimization
Yu-Hsin Kuo et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)
Level set-based topology optimization with overhang constraint: Towards support-free additive manufacturing
Yaguang Wang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
Modeling temperature and residual stress fields in selective laser melting
Yingli Li et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Heat transfer simulations of selective laser melting process based on volumetric heat source with powder size consideration
Hong-Chuong Tran et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
The Influence of the Support Structure on Residual Stress and Distortion in SLM Inconel 718 Parts
Tatiana Mishurova et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Optimizing supports for additive manufacturing
Gregoire Allaire et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)
Undercut and overhang angle control in topology optimization: A density gradient based integral approach
Xiaoping Qian
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2017)
Heat transfer and phase transition in the selective laser melting process
Yingli Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Design and Performance Assessment of Innovative Eco-Efficient Support Structures for Additive Manufacturing by Photopolymerization
Andres Diaz Lantada et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
Support structure constrained topology optimization for additive manufacturing
Amir M. Mirzendehdel et al.
COMPUTER-AIDED DESIGN (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bed
Ali Foroozmehr et al.
MATERIALS & DESIGN (2016)
Optimum Part Build Orientation in Additive Manufacturing for Minimizing Part Errors and Support Structures
Paramita Das et al.
43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43 (2015)
Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
F. Calignano
MATERIALS & DESIGN (2014)
Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structures
Martin Leary et al.
MATERIALS & DESIGN (2014)
Numerical and experimental investigations on laser melting of stainless steel 316L metal powders
Kurian Antony et al.
JOURNAL OF MANUFACTURING PROCESSES (2014)
Numerical Computation of Component Shape Distortion Manufactured by Selective Laser Melting
L. Papadakis et al.
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MANUFACTURING OF LIGHTWEIGHT COMPONENTS: MANULIGHT 2014 (2014)
A new approach to the design and optimisation of support structures in additive manufacturing
G. Strano et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material
Joaquim Ciurana et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting
Ahmed Hussein et al.
MATERIALS & DESIGN (2013)
Dynamic Response Topology Optimization in the Time Domain Using Equivalent Static Loads
H. H. Jang et al.
AIAA JOURNAL (2012)
Process parameter selection for selective laser melting of Ti6Al4V based on temperature distribution simulation and experimental sintering
Bo Song et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Crashworthiness design optimization using equivalent static loads
S-I Yi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2012)
Select laser melting of W-Ni-Fe powders: simulation and experimental study
D. Q. Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Investigations on residual stresses and deformations in selective laser melting
Michael F. Zaeh et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2010)
A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing
I. A. Roberts et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Model of thermal conductivity in powder beds
A. V. Gusarov et al.
PHYSICAL REVIEW B (2009)
Solutions for modelling moving heat sources in a semi-infinite medium and applications to laser material processing
M. Van Elsen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
Calculation of equivalent static loads and its application
WS Choi et al.
NUCLEAR ENGINEERING AND DESIGN (2005)
A three dimensional model for direct laser metal powder deposition and rapid prototyping
M Labudovic et al.
JOURNAL OF MATERIALS SCIENCE (2003)
An analytical model for the temperature field in the laser forming of sheet metal
PJ Cheng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
分享论文
