☆ 4.8 Article

Powder ageing of Polyamide 6 in laser sintering and its effects on powder and component characteristics

ADDITIVE MANUFACTURING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Industrial

Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion

Chao Cai et al.

Summary: A systematic comparison of polyamide 12 (PA12) parts printed by Selective Laser Sintering (SLS) and Multi Jet Fusion (MJF) techniques revealed that MJF-printed specimens had slightly stronger mechanical strength and smoother front and side surfaces than SLS-printed counterparts.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ageing of PBF-Grade Poly(Phenylene Sulfide) Powder and its Effect on Critical Printability Properties

Camden A. Chatham et al.

Summary: The paper examines the effects of thermal ageing on key properties of PPS critical to PBF processing, revealing potential issues and changes that may occur with aged powders during use. Through simulated experiments, the authors observed changes in properties of thermally aged powder and attempted to explain how these changes may impact the PBF printing process.

MACROMOLECULAR MATERIALS AND ENGINEERING (2021)

添加到收藏夹

Article Polymer Science

Evaluating poly(ether ether ketone) powder recyclability for selective laser sintering applications

Akanksha Patel et al.

Summary: PEEK is increasingly used in SLS due to its superior properties, and research shows that thermal treatment results in increased crystallinity, unchanged particle size and shape, increased melt viscosity, and slightly improved flowability. Understanding these changes could help reduce waste.

POLYMER DEGRADATION AND STABILITY (2021)

添加到收藏夹

Article Engineering, Mechanical

Prediction of SLS parts properties using reprocessing powder

Ana C. Lopes et al.

Summary: This study validates a methodology to determine the minimum amount of virgin material needed to meet the operational specifications of SLS parts, ensuring sustainable management of processed powder and economic viability of the process through the use of theoretical prediction models.

RAPID PROTOTYPING JOURNAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective laser sintering (SLS)-printable thermosetting resins via controlled conversion

C. Garrett Campbell et al.

Summary: An alternative strategy for SLS-printable thermosets is demonstrated by partially curing the material to increase T-g and minimize additional curing needed post-printing. The material is then printed without cross-linking, followed by curing through a slow temperature ramp. This approach showcases the first demonstration of SLS printing and subsequent curing of minimally filled high T-g thermoset materials, showing competitive performance with popular thermoplastics.

MRS COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental, numerical and analytical investigation of the polyamide 12 powder bed fusion with the aim of building dimensionless characteristic numbers

Moritz Gruenewald et al.

Summary: This study investigates the impact of material properties on product quality in powder bed fusion through experiments and numerical simulations, proposing a method to calculate dimensionless energy input. The results show good correlation between experimental data and numerical simulation results.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Characterization of thermally treated polypropylene powders with wide sintering window for powder bed fusion of polymers

Xiaodi Gong et al.

Summary: By developing a thermal treatment method with a mixed dispersant system (TTMS), improvements were made to the sintering window and particle morphology of isotactic polypropylene (PP) powder, resulting in enhanced flowability and better laser processability.

POLYMER TESTING (2021)

添加到收藏夹

Article Engineering, Mechanical

The effect of powder age in high speed sintering of poly(propylene)

Rhys J. Williams et al.

Summary: This study demonstrates for the first time that poly(propylene) can be successfully processed using high speed sintering and recycled several times through the process with little to no detriment to the parts obtained. The findings show that increased powder age leads to improvements in build success rate, powder properties, and dimensional accuracy of the parts.

RAPID PROTOTYPING JOURNAL (2021)

添加到收藏夹

Article Engineering, Manufacturing

Experimental investigating and numerical simulations of the thermal behavior and process optimization for selective laser sintering of PA6

Maoyuan Li et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Polymer Science

Effect of powder recycling on anisotropic tensile properties of selective laser sintered PA2200 polyamide

Bibo Yao et al.

EUROPEAN POLYMER JOURNAL (2020)

添加到收藏夹

Article Engineering, Manufacturing

A process control and interlayer heating approach to reuse polyamide 12 powders and create parts with improved mechanical properties in selective laser sintering

Feifei Yang et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Engineering, Industrial

Tribological and mechanical properties of MoS2 enhanced polyamide 12 for selective laser sintering

Jiaming Bai et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D Printing of a Robust Polyamide-12-Carbon Black Composite via Selective Laser Sintering: Thermal and Electrical Conductivity

Alejandro H. Espera et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Characterization & Testing

Characterisation of carbon fibre (Cf) - Poly Ether Ketone (PEK) composite powders for laser sintering

Binling Chen et al.

POLYMER TESTING (2019)

添加到收藏夹

Proceedings Paper Physics, Applied

Temperature Induced Ageing of PA12 Powder During Selective Laser Sintering Process

J. Benz et al.

PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS (2019)

添加到收藏夹

Article Materials Science, Characterization & Testing

Systematical mechanism of Polyamide-12 aging and its micro-structural evolution during laser sintering

Peng Chen et al.

POLYMER TESTING (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison with Polyamide 12

Peng Chen et al.

POLYMER TESTING (2018)

添加到收藏夹

Article Polymer Science

Additive Manufacturing of Polypropylene: A Screening Design of Experiment Using Laser-Based Powder Bed Fusion

Inigo Flores Ituarte et al.

POLYMERS (2018)

添加到收藏夹

Article Polymer Science

Effect of PA12 powder reuse on coalescence behaviour and microstructure of SLS parts

Sasan Dadbakhsh et al.

EUROPEAN POLYMER JOURNAL (2017)

添加到收藏夹

Article Polymer Science

Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories

Stefan Josupeit et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Poly Aryl Ether Ketones (PAEKs) and carbon-reinforced PAEK powders for laser sintering

Binling Chen et al.

JOURNAL OF MATERIALS SCIENCE (2017)

添加到收藏夹

Article Optics

A Round Robin study for Selective Laser Sintering of polyamide 12: Microstructural origin of the mechanical properties

Thomas Stichel et al.

OPTICS AND LASER TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Correlation of Process Parameters with Mechanical Properties of Laser Sintered PA12 Parts

Eva C. Hofland et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2017)

添加到收藏夹

Article Polymer Science

Characterization of polyamide powders for determination of laser sintering processability

Leander Verbelen et al.

EUROPEAN POLYMER JOURNAL (2016)

添加到收藏夹

Article Thermodynamics

Assessment of polyamide-6 crystallinity by DSC

Coraline Millot et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2015)

添加到收藏夹

Article Polymer Science

Review on the thermo-oxidative degradation of polymers during processing and in service

Pieter Gijsman

E-POLYMERS (2014)

添加到收藏夹

Article Polymer Science

Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders

S. Berretta et al.

EUROPEAN POLYMER JOURNAL (2014)

添加到收藏夹

Article Materials Science, Textiles

Mechanical and Thermal Properties of Long Carbon Fiber-reinforced Polyamide 6 Composites

Hyo Jin An et al.

FIBERS AND POLYMERS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Aging behavior of thermoplastic elastomers in the laser sintering process

Stefan Ziegelmeier et al.

JOURNAL OF MATERIALS RESEARCH (2014)

添加到收藏夹

Article Engineering, Chemical

Determination of Robust Material Qualities and Processing Conditions for Laser Sintering of Polyamide 12

Andreas Wegner et al.

POLYMER ENGINEERING AND SCIENCE (2014)

添加到收藏夹

Proceedings Paper Physics, Applied

Rheological Changes of polyamide 12 under oscillatory shear

C. Mielicki et al.

PROCEEDINGS OF PPS-29: THE 29TH INTERNATIONAL CONFERENCE OF THE POLYMER - CONFERENCE PAPERS (2014)

添加到收藏夹

Article Automation & Control Systems

Melting process and mechanics on laser sintering of single layer polyamide 6 powder

Wenxiao Zhou et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

添加到收藏夹

Article Polymer Science

Evolution of the amorphous fraction of PEEK during annealing at atmospheric and high pressure above the glass transition temperature

Marion Dasriaux et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

添加到收藏夹

Article Engineering, Manufacturing

Study into the recyclability of a thermoplastic polyurethane powder for use in laser sintering

Katherine Plummer et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Comparison of Aged Polyamide Powders for Selective Laser Sintering

A. Martinez et al.

4TH MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE (MESIC 2011) (2012)

添加到收藏夹

Article Engineering, Mechanical

Recycling of polyamide 12 based powders in the laser sintering process

Krassimir Dotchev et al.

RAPID PROTOTYPING JOURNAL (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Processing and properties of glass bead particulate-filled functionally graded Nylon-11 composites produced by selective laser sintering

Haseung Chung et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of processing on microstructure and properties of SLS Nylon 12

H. Zarringhalam et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Engineering, Chemical

Electrical conductivity of carbon filled nylon 6,6

JA Heiser et al.

ADVANCES IN POLYMER TECHNOLOGY (2004)

添加到收藏夹

Article Polymer Science

Effect of aging on the mechanical properties of cold-crystallized poly(trimethylene terephthalate)

E El Shafee

POLYMER (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.