相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effect of heat treatments on the microstructure and mechanical properties of IN738LC prepared by electron beam powder bed fusion
Yang Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Phase stability and mechanical properties of wire plus arc additively manufactured H13 tool steel at elevated temperatures
A. N. M. Tanvir et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Effect of TIG remelting on microstructure, corrosion and wear resistance of coating on surface of 4Cr5MoSiV1 (AISI H13)
Lisong Zhu et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Evaluation of post-treatments of novel hot-work tool steel manufactured by laser powder bed fusion for aluminum die casting applications
A. M. Vilardell et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Microstructures and mechanical properties evolution of IN939 alloy during electron beam selective melting process
Yang Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
On the microstructure and solidification behavior of new generation additively manufactured Al-Cu-Mg-Ag-Ti-B alloys
M. H. Ghoncheh et al.
ADDITIVE MANUFACTURING (2021)
Effects of laser shock peening on the hot corrosion behaviour of the selective laser melted Ti6Al4V titanium alloy
Haifei Lu et al.
CORROSION SCIENCE (2021)
High-performance integrated additive manufacturing with laser shock peening -induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components
Jinzhong Lu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)
High strength (∼2000 MPa) or highly ductile (∼11%) additively manufactured H13 by tempering at different conditions
Jujie Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Laser finishing of 3D printed parts produced by material extrusion
F. Lambiase et al.
OPTICS AND LASERS IN ENGINEERING (2020)
Structure-property relationships in hot forged AlxCoCrFeNi high entropy alloys
Ayush Sourav et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Surface modification of AISI H13 steel by die-sinking electrical discharge machining and TiAlN coating: A promising hybrid technique to improve wear resistance
Sinval Pedroso da Silva et al.
WEAR (2020)
Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel
M. Asberg et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Preparation and mechanical properties of selective laser melted H13 steel
Bo Ren et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Microstructure evolution and fracture mechanism of H13 steel during high temperature tensile deformation
Yao-li Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of tempering on laser remelted AISI H13 tool steel
Debapriya Patra Karmakar et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Wire-arc additive manufacturing H13 part: 3D pore distribution, microstructural evolution, and mechanical performances
Jinguo Ge et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Improving strength and ductility of H13 die steel by pre-tempering treatment and its mechanism
Jian Zhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing
Faraz Deirmina et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Comparative study on microstructure and corrosion performance of 316 stainless steel prepared by laser melting deposition with ring-shaped beam and Gaussian beam
Jianbo Lei et al.
OPTICS AND LASER TECHNOLOGY (2019)
High power diode laser surface hardening of AISI 4130; statistical modelling and optimization
Mahmoud Moradi et al.
OPTICS AND LASER TECHNOLOGY (2019)
Wire arc additive manufacturing of hot work tool steel with CMT process
Y. Ali et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Morphological Characteristics of Dimples of Ductile Fracture of VT23M Titanium Alloy and Identification of Dimples on Fractograms of Different Scale
Ihor Konovalenko et al.
MATERIALS (2019)
Effect of Thermal Fatigue on Microstructure and Mechanical Properties of H13 Tool Steel Processed by Selective Laser Surface Melting
Chao Meng et al.
METALS (2019)
Laser melting deposition of K403 superalloy: The influence of processing parameters on the microstructure and wear performance
Heyu Song et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of minimum quantity lubrication on surface integrity of ground hardened H13 hot die steel
A. S. Awale et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Sliding wear of nitrided and duplex coated H13 steel against aluminium alloy
Jihua Peng et al.
TRIBOLOGY INTERNATIONAL (2019)
The effect of powder oxidation on defect formation in laser additive manufacturing
Chu Lun Alex Leung et al.
ACTA MATERIALIA (2019)
Effect of nitrided-layer microstructure control on wear behavior of AISI H13 hot work die steel
Bo Wang et al.
APPLIED SURFACE SCIENCE (2018)
General investigations on processing tool steel X40CrMoV5-1 with selective laser melting
Julian Krell et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
CFRTP and stainless steel laser joining: Thermal defects analysis and joining parameters optimization
Junke Jiao et al.
OPTICS AND LASER TECHNOLOGY (2018)
Experimental analysis of Nd-YAG laser cutting of sheet materials - A review
Amit Sharma et al.
OPTICS AND LASER TECHNOLOGY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Microstructure and properties of die steel fabricated by WAAM using H13 wire
Tingting Wang et al.
VACUUM (2018)
A comparative assessment of iron and cobalt-based hard-facing alloy deformation using HR-EBSD and HR-DIC
Chong Zhao et al.
ACTA MATERIALIA (2018)
Microstructure investigation of Inconel 625 coating obtained by laser cladding and TIG cladding methods
Mohammad Naghiyan Fesharaki et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel
Zhengtao Gan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses
Neil S. Bailey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Evaluating microscopic hardness in ferritic steel based on crystallographic measurements via electron backscatter diffraction
Mamoru Hayakawa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
Investigation of a novel functionally graded material for the repair of premium hypereutectoid rails using laser cladding technology
Quan Lai et al.
COMPOSITES PART B-ENGINEERING (2017)
Prediction of hardness and deformation using a 3-D thermal analysis in laser hardening of AISI H13 tool steel
Sehyeok Oh et al.
APPLIED THERMAL ENGINEERING (2017)
Impact toughness of 12Cr1MoV steel. Part 2-Influence of high intensity ion beam irradiation on energy and deformation parameters and mechanisms of fracture
Sergey V. Panin et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
Coupled crystal orientation-size effects on the strength of nano crystals
Rui Yuan et al.
SCIENTIFIC REPORTS (2016)
Microstructure and Mechanical Properties of Laser Clad and Post-cladding Tempered AISI H13 Tool Steel
Gururaj Telasang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Laser surface hardening of AISI H13 tool steel
Jae-Ho Lee et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)
Laser surface hardening of H13 steel in the melt case
KA Chiang et al.
MATERIALS LETTERS (2005)
Grain refinement strengthening of a micro-crystalline high nitrogen austenitic stainless steel
A Di Schino et al.
MATERIALS LETTERS (2003)
分享论文
