☆ 4.8 Article

Injection continuous liquid interface production of 3D objects

SCIENCE ADVANCES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Direct ink write multi-material printing of PDMS-BTO composites with MWCNT electrodes for flexible force sensors

Anabel Renteria et al.

Summary: This paper introduces the use of DIW 3D printing to fabricate stretchable piezoelectric materials and evaluate their piezoelectric properties. The results show that the fabricated PDMS with 50 wt.% BTO composite has the highest piezoelectric coefficient and output voltage.

FLEXIBLE AND PRINTED ELECTRONICS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multimaterial Multinozzle Adaptive 3D Printing of Soft Materials

Sebastien G. M. Uzel et al.

Summary: This paper introduces a high throughput platform called multimaterial multinozzle adaptive 3D printing (MMA-3DP), which allows for independent control of nozzle height and seamless switching between different inks. The platform is demonstrated by printing viscoelastic inks composed of different materials onto complex substrates with varying topography. This new method opens up new possibilities for rapidly patterning soft materials for structural, functional, and biomedical applications.

ADVANCED MATERIALS TECHNOLOGIES (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Fabricating High-Resolution and High-Dimensional Microneedle Mold through the Resolution Improvement of Stereolithography 3D Printing

Sangmin Choo et al.

Summary: Microneedles with high resolution and high dimensionality were successfully fabricated using SLA 3D printing by optimizing the printing conditions. This technology can be applied in the manufacturing of drug delivery tools and various microstructures.

PHARMACEUTICS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D Printing of Flexible Strain Sensor Array Based on UV-Curable Multiwalled Carbon Nanotube/Elastomer Composite

Ting Xiao et al.

Summary: The Internet of Things (IoT) is expected to significantly enhance various aspects of society, particularly in soft robotics, structural health monitoring, and human motion detection. This study developed a 3D printing technology to fabricate high-performance flexible strain sensors based on a multiwalled carbon nanotube/elastomer (MWCNT/EA) composite, demonstrating excellent sensitivity, linearity, detectable strain range, mechanical durability, and environmental responsiveness. Additionally, a strain sensor array was developed to further showcase the high performance of the 3D printed device in sensing external stimuli distribution.

ADVANCED MATERIALS TECHNOLOGIES (2021)

添加到收藏夹

Article Engineering, Industrial

Graded structures by multi-material mixing in laser powder bed fusion

Wessel W. Wits et al.

Summary: In laser powder bed fusion, multi-material mixing and elemental diffusion were studied for the fabrication of functionally graded structures. An adapted recoater was used to deposit powder from multiple sources, creating a more gradual material transition. Homogenization heat treatment enhanced elemental diffusion, resulting in a gradual material transition without a distinct interface.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Transdermal vaccination via 3D-printed microneedles induces potent humoral and cellular immunity

Cassie Caudill et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

3D Printing of Multilayered and Multimaterial Electronics: A Review

Guo Liang Goh et al.

Summary: 3D printing, also known as additive manufacturing, has been utilized in electronics manufacturing for the fabrication of various electronic components and devices. There is ongoing research on 3D printing of multilayered and multimaterial electronics, but a comprehensive review on the design and fabrication consideration is yet to be done.

ADVANCED ELECTRONIC MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cavity vat photopolymerisation for additive manufacturing of polymer-composite 3D objects

Joel Bachmann et al.

Summary: A new method of additive manufacturing, cavity vat photopolymerisation, has been introduced to produce hard-shell/soft-core parts by filling cavities with a dual-curing resin that forms an elastomer/thermoset covalently bonded interface.

COMMUNICATIONS MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-resolution stereolithography using a static liquid constrained interface

Aftab A. Bhanvadia et al.

Summary: This research successfully overcomes adhesion issues between polymerized layers and the solid constraining interface in conventional stereolithography by using a static inert liquid as a constraining interface, enabling high-resolution part fabrication.

COMMUNICATIONS MATERIALS (2021)

添加到收藏夹

Article Chemistry, Analytical

Development of a Multi-Material Stereolithography 3D Printing Device

Bilal Khatri et al.

MICROMACHINES (2020)

添加到收藏夹

Review Engineering, Chemical

A Review of Stereolithography: Processes and Systems

Jigang Huang et al.

PROCESSES (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Optimization of FDM 3D printing process parameters for multi-material using artificial neural network

Dinesh Yadav et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

CFD analysis and prediction of suction force during the pulling-up stage of the continuous liquid interface production process

Quandai Wang et al.

AIP ADVANCES (2019)

添加到收藏夹

Article Engineering, Manufacturing

Mask Video Projection-Based Stereolithography With Continuous Resin Flow

Xiangjia Li et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Voxelated soft matter via multimaterial multinozzle 3D printing

Mark A. Skylar-Scott et al.

NATURE (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Shape-shifting structured lattices via multimaterial 4D printing

J. William Boley et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface

David A. Walker et al.

SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modeling and Correcting Cure-Through in Continuous Stereolithographic 3D Printing

Zachary D. Pritchard et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

添加到收藏夹

Article Engineering, Manufacturing

Accelerated refilling speed in rapid stereolithography based on nano-textured functional release film

Li Wang et al.

ADDITIVE MANUFACTURING (2019)

添加到收藏夹

Article Polymer Science

Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures

Rupinder Singh et al.

POLYMERS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports

Chao Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Engineering, Manufacturing

Method for Attaining Dimensionally Accurate Conditions for High-Resolution Three-Dimensional Printing Ceramic Composite Structures Using MicroCLIP Process

Henry Oliver T. Ware et al.

JOURNAL OF MICRO AND NANO-MANUFACTURING (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Spatially controlled coating of continuous liquid interface production microneedles for transdermal protein delivery

Cassie L. Caudill et al.

JOURNAL OF CONTROLLED RELEASE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Optimisation of Substrate Angles for Multi-material and Multi-functional Inkjet Printing

Jayasheelan Vaithilingam et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion

Jun Yin et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Engineering, Manufacturing

High-Efficiency High-Resolution Multimaterial Fabrication for Digital Light Processing-Based Three-Dimensional Printing

Kavin Kowsari et al.

3D PRINTING AND ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Engineering, Mechanical

Stepwise graded struts for maximizing energy absorption in lattices

Jochen Mueller et al.

EXTREME MECHANICS LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing

Johan U. Lind et al.

NATURE MATERIALS (2017)

添加到收藏夹

Article Engineering, Biomedical

3D-printing and mechanics of bio-inspired articulated and multi-material structures

Michael M. Porter et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

添加到收藏夹

Article Polymer Science

Development of 3D printable formulations containing CNT with enhanced electrical properties

Gustavo Gonzalez et al.

POLYMER (2017)

添加到收藏夹

Article Engineering, Mechanical

Study of separation force in constrained surface projection stereolithography

Yayue Pan et al.

RAPID PROTOTYPING JOURNAL (2017)

添加到收藏夹

Article Instruments & Instrumentation

Inkjet 3D printing of UV and thermal cure silicone elastomers for dielectric elastomer actuators

David McCoul et al.

SMART MATERIALS AND STRUCTURES (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Viscous Fingering in Multiport Hele Shaw Cell for Controlled Shaping of Fluids

Tanveer ul Islam et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Review Chemistry, Analytical

The Emerging Frontiers and Applications of High-Resolution 3D Printing

Mao Mao et al.

MICROMACHINES (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production

Ashley R. Johnson et al.

PLOS ONE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Layerless fabrication with continuous liquid interface production

Rima Janusziewicz et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Multimaterial 4D Printing with Tailorable Shape Memory Polymers

Qi Ge et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks

James O. Hardin et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Multimaterial Bioink Method for 3D Printing Tunable, Cell-Compatible Hydrogels

Alexandra L. Rutz et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Continuous liquid interface production of 3D objects

John R. Tumbleston et al.

SCIENCE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Multimaterial magnetically assisted 3D printing of composite materials

Dimitri Kokkinis et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Engineering, Industrial

Multi-material stereolithography

Jae-Won Choi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)

添加到收藏夹

Article Polymer Science

Modeling of Oxygen-Inhibited Free Radical Photopolymerization in a PDMS Microfluidic Device

Dhananjay Dendukuri et al.

MACROMOLECULES (2008)

添加到收藏夹

Article Engineering, Mechanical

Functionalizing stereolithography resins: effects of dispersed multi-walled carbon nanotubes on physical properties

J. Hector Sandoval et al.

RAPID PROTOTYPING JOURNAL (2006)

添加到收藏夹

Article Engineering, Industrial

On-line force monitoring of platform ascending rapid prototyping system

YM Huang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)

添加到收藏夹

Article Engineering, Manufacturing

Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing

M Matsumoto et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.