期刊
COATINGS
卷 12, 期 9, 页码 -出版社
MDPI
DOI: 10.3390/coatings12091268
关键词
molten salt; LaNi5; hydrogen; gas sensor; electrodeposition
资金
- Iketani Science and Technology Foundation
- ISTF, Japan
LaNi5 hydrogen storage alloy was successfully prepared by electrodepositing La using a molten salt. Uniform formation of LaNi5 on the substrate surface was achieved at 750 degrees C. The electrodeposition-formed LaNi5 exhibited good hydrogen storage properties.
A hydrogen storage alloy was formed by electrodepositing La using a molten salt. La was electrodeposited using Ni as a substrate in NaCl-KCl-5.0 mol% LaF3 molten salt at electrodeposition temperatures of 750 degrees C and 900 degrees C. The electrodeposition potential was -2.25 V. The LaNi5 hydrogen storage alloy was then prepared by the electrodeposition of La and the mutual diffusion of the Ni substrate. As a result, it was clarified that La can be electrodeposited by using a molten salt. Single-phase LaNi5 was produced at 750 degrees C rather than at 900 degrees C. It became possible to uniformly form LaNi5, an intermetallic compound, on the substrate surface. The prepared hydrogen storage alloy was exposed to Ar-10%H-2 to store hydrogen; at this time, hydrogen was stored by changing the sample temperature. The discharged hydrogen was measured by a gas sensor. It was clarified that the hydrogen storage and hydrogen discharge were the highest in the sample obtained by electrodepositing La for 1 h at 750 degrees C. LaNi5 formed by electrodeposition showed hydrogen storage properties, and this method was found to be effective even for samples with complex shapes.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据