☆ 4.7 Article

Effect of heat treatments on metastable pitting of 316L stainless steel fabricated by selective laser melting

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Influence of 17-4 PH stainless steel powder recycling on properties of SLM additive manufactured parts

Sara Giganto et al.

Summary: Metal additive manufacturing (AM) processes are rapidly developing, but the quality of manufactured parts remains a major concern. This study evaluated the properties of 17-4 PH stainless steel parts printed from powder in different recycling states. The results showed that powder recycling slightly decreased surface roughness and pore size, decreased internal porosity, increased gamma-phase content, and led to increased ductility and decreased hardness of the samples. It can be concluded that the recycling process is suitable for ensuring the economic and environmental viability of the SLM manufacturing process without adversely affecting the properties of the parts.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the pitting behaviour of laser powder bed fusion prepared 316L stainless steel upon post-processing heat treatments

Ke Wang et al.

Summary: This study examines the effect of post-processing annealing on the pitting behavior of LPBF 316L stainless steel, and finds that high temperature annealing leads to oxide transformation and Cr depletion, resulting in a decrease in pitting potential and repassivation potential.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Statistical analysis of the pitting corrosion induced by potentiostatic pulse tests of wrought and SLM 316L stainless steels

Arthur Racot et al.

Summary: An original approach was used to compare the sensitivity to pitting corrosion of wrought and SLM 316L stainless steels, and the measurement and analysis of current densities during potentiostatic pulse tests helped to gain a better understanding of the pitting corrosion behavior of these materials.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Optics

Evolution of residual stress behavior in selective laser melting (SLM) of 316L stainless steel through preheating and in-situ re-scanning techniques

Saad Waqar et al.

Summary: The premature fractures, cracks, distortions, and delamination in selective laser melting manufactured components are among the most prominent challenges. Residual stresses are the main causes of these issues. Post processing techniques are commonly used to reduce these stresses, but they increase production time and costs. Therefore, developing in-process techniques to reduce residual stresses is crucial for large-scale production of metallic components.

OPTICS AND LASER TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of solution annealing on microstructures and corrosion behavior of wire and arc additive manufactured AZ91 magnesium alloy in sodium chloride solution

Zhen Zhang et al.

Summary: This study investigated the effect of solution annealing on the microstructures and corrosion behavior of wire and arc additive manufactured AZ91 magnesium alloy. The results showed that solution annealing coarsened the grain, eliminated non-basal grain orientation, and dissolved the Mg17Al12 phase. Additionally, solution annealing improved the corrosion resistance of the alloy.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Pitting behavior of 316L stainless steel in direct culture with mesenchymal stem cells

Jing Wu et al.

Summary: Corrosion is a major reason for the failure of metallic implants. The presence of bone marrow derived mesenchymal stem cells (BMSCs) can decrease the stability of 316 L stainless steels (316 L SS), leading to preferential pitting corrosion initiation at the peripheries of BMSCs.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

On the effect of rapid annealing on the microstructure and mechanical behavior of additively manufactured stainless steel by Laser Powder Bed Fusion

Mohammad Reza Jandaghi et al.

Summary: The study demonstrates that short-term heat treatment can effectively reduce residual stress in stainless steel 316L products and improve the stability of the microstructure. Additionally, rapid annealing longer than 30 seconds leads to lattice structure evolution and grain boundary migration, resulting in a decrease in material mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Chemistry, Analytical

Electrochemical noise comparative study of pitting corrosion of 316L stainless steel fabricated by selective laser melting and wrought

Zhen Zhang et al.

Summary: The study compared the pitting corrosion behavior of SLM 316L SS and wrought 316L SS, finding that the SLM samples had higher pitting potentials. Different types of pits initiated by non-metallic inclusions, gas pores, and lack-of-fusion pores were identified using the electrochemical noise technique. Analysis showed that the higher pitting resistance of SLM 316L was due to its poorer ability of pit growth, and the potential application of using EN technique to evaluate LOF pores in SLM parts was discussed.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective laser melting (SLM) of CX stainless steel: Theoretical calculation, process optimization and strengthening mechanism

Dongdong Dong et al.

Summary: In this study, selective laser melting technology was used to manufacture CX stainless steel samples, and the microstructure, phase distribution, crystallographic orientation, and mechanical properties were investigated. The optimal linear energy density led to CX stainless steel samples with the best surface roughness and relative density, predominantly composed of fine martensite structures. Dislocation strengthening was found to be the main mechanism influencing the strength of the samples.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Industrial

Pitting resistance of 316 stainless steel after laser shock peening: Determinants of microstructural and mechanical modifications

Lei Guan et al.

Summary: Laser shock peening was used to modify the microstructure and mechanical properties of a 316 stainless steel. The experiment found that the microdefects generated by LSP treatment may deteriorate the superiority of compressive residual stress induced by LSP in the pitting resistance of stainless steel.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel

Qi Chao et al.

Summary: Additively manufactured 316L austenitic stainless steel was subjected to various heat treatments to study the evolution of residual stress, microstructure, and mechanical properties. Significant compressive residual stress was revealed in the as-built condition, with stress relief achieved at different temperatures. Microstructural changes, such as recrystallization, coarsening of nano-inclusions, and precipitation of embrittling phases, were observed during the heat treatment process, impacting the material's ductility and strength. The study established important relationships between heat treatment, properties, and microstructural changes for the structural application of SLM 316L.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting

V. Cruz et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing

Chengshuang Zhou et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing

Majid Laleh et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

An investigation on the effect of deposition pattern on the microstructure, mechanical properties and residual stress of 316L produced by Directed Energy Deposition

Abdollah Saboori et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Chemistry, Physical

The metastable pitting corrosion of 2205 duplex stainless steel under bending deformation

Yan Hou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Correlated pitting stages of 304 stainless steel with recurrence quantification analysis of electrochemical noise

Zhen Zhang et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes

Decheng Kong et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Electrochemistry

The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L

Rebecca F. Schaller et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of cyclic stress on the metastable pitting characteristic for 304 stainless steel under potentiostatic polarization

L. Guan et al.

CORROSION SCIENCE (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Passivity breakdown, pit initiation and propagation of pits in metallic materials - Review

J. Soltis

CORROSION SCIENCE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Metastable pitting corrosion of 304 stainless steel in 3.5% NaCl solution

Wenming Tian et al.

CORROSION SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Application of electrochemical noise to monitor stress corrosion cracking of stainless steel in tetrathionate solution under constant load

Mathias Breimesser et al.

CORROSION SCIENCE (2012)

添加到收藏夹

Article Electrochemistry

The history of the Point Defect Model for the passive state: A brief review of film growth aspects

Digby D. Macdonald

ELECTROCHIMICA ACTA (2011)

添加到收藏夹

Article Electrochemistry

Detection of SCC on prestressing steel wire by the simultaneous use of electrochemical noise and acoustic emission measurements

J. Kovac et al.

ELECTROCHIMICA ACTA (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Mo species on metastable pitting of Fe18Cr alloys - A current transient analysis

W. J. Tobler et al.

CORROSION SCIENCE (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution of current transients and morphology of metastable and stable pitting on stainless steel near the critical pitting temperature

MH Moayed et al.

CORROSION SCIENCE (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Validation of corrosion rates measured by the Tafel extrapolation method

E McCafferty

CORROSION SCIENCE (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.