☆ 4.7 Article

Effect of high Cu concentration on the mechanical property and precipitation behavior of Al-Mg-Zn- (Cu) crossover alloys

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Quantifying early-stage precipitation strengthening of Al-Mg-Zn(-Cu) alloy by using particle size distribution

Yingxin Geng et al.

Summary: This study quantifies the early stage precipitation strengthening behavior of a newly developed Al-Mg-Zn alloy by particle size distribution. The results show that the rapid strengthening response strongly depends on the number density and constitution of Guinier-Preston zones, and is increased by the addition of Cu. The strength of the alloy is quantified by evaluating different types of precipitates.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultra-fast bake-hardening response of Al-Mg-Si-Cu-Zn alloys with the assistance of heterogeneous nucleation

Liang Zhu et al.

Summary: This study reports a new strategy to greatly enhance the bake-hardening response of AlMg-Si-Cu-Zn alloys, which may have wide applications in the automotive industry.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Chemistry, Physical

The effect of Ag on the tensile strength and fracture toughness of novel Al-Mg-Zn alloys

Haoran Liu et al.

Summary: This study evaluates the effect of trace addition of Ag on the microstructure, tensile strength, and fracture toughness of novel Al-Mg-Zn alloys. The addition of Ag improves the age hardening response and refines the density and size of the matrix precipitates (MPts), but weakens their ability to obstruct dislocation motion, leading to no improvement in the strength of the alloys. The addition of Ag also has different effects on fracture toughness depending on the concentration, with 0.2 wt% Ag improving it and 0.4 wt% and 0.6 wt% Ag decreasing it.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Shearing and rotation of β and β′ precipitates in an Al-Mg-Si alloy under tensile deformation: In-situ and ex-situ studies

Mingjun Yang et al.

Summary: In-situ TEM experiments revealed that coherent beta'' precipitates in Al alloys are sheared into small fragments by dislocations, while semi-coherent beta' precipitates are more difficult to be fragmented and can maintain their shape after tensile deformation.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solute cluster evolution during deformation and high strain hardening capability in naturally aged Al-Zn-Mg alloy

Peng Zhang et al.

Summary: The study investigates the effects of solute clusters on the mechanical properties of a commercial Al-Zn-Mg alloy during natural aging (NA). It is found that dense solute clusters enhance the yield strength and strain hardening ability of the alloy without affecting dislocation density evolution. Solute clusters undergo a dissolution-to-coarsening transition during deformation, potentially contributing to the high strain hardening rate observed.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Chemistry, Physical

Convolutional neural network-assisted recognition of nanoscale L12 ordered structures in face-centred cubic alloys

Yue Li et al.

Summary: A CNN-based intelligent L1(2)-ordered structure recognition method was proposed for revealing the 3D distribution of nanoparticles in FCC alloys. The approach allows detection of nanodomains with a minimum radius down to 5 angstrom and shows promise for recognizing other nanoscale ordered structures in the future.

NPJ COMPUTATIONAL MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Giant hardening response in AlMgZn(Cu) alloys

Lukas Stemper et al.

Summary: This study presents a thermomechanical processing concept that utilizes the full industrial application potential of AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing achieves a balance between high mechanical strength and good formability while addressing the need for economically feasible processing times. The alloys investigated show high formability and a rapid hardening response, with significant enhancement by the addition of Cu, after short pre-aging treatments and final heat treatments.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Chemistry, Physical

Precipitation hardening and intergranular corrosion behavior of novel Al-Mg-Zn(-Cu) alloys

Yanlin Pan et al.

Summary: The research found that by increasing the zinc and copper content in Al-Mg-Zn(-Cu) alloys, the strength and corrosion resistance of the alloy can be improved. The density and lattice spacing of intragranular precipitates increase while precipitate sizes decrease, resulting in increased strength. Additionally, enhancing the intergranular corrosion resistance can be achieved by reducing the potential between grain boundary precipitates and the Al matrix.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Thermodynamics

ICME guided design of heat-treatable Zn-modified Al-Mg alloys

Zhaorui Zhang et al.

Summary: This study shows that by optimizing the zinc content and two-step aging treatment process, the age-hardening response of Al-Mg-Zn alloys can be enhanced and accelerated. Pre-aging treatment results in a large number of fine and dispersive T precipitates, while further optimization of the two-stage aging treatment for the Al-5.1Mg-3.0Zn alloy increases the peak-aged yield strength by 21.1% compared to the single-step aging process.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Giant bake hardening response of multi-scale precipitation strengthened Al-Mg-Si-Cu-Zn alloy via pre-aging treatments

Wenyuan Gong et al.

Summary: The high-performance aluminum alloy, designed with the concept of high degree alloying, showed improved plasticity and strength compared to conventional aluminum alloys through optimized pre-aging treatment, particularly in terms of bake hardening response.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reducing welding hot cracking of high-strength novel Al-Mg-Zn-Cu alloys based on the prediction of the T-shaped device

Yanlin Pan et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Age-hardening response of AlMgZn alloys with Cu and Ag additions

Lukas Stemper et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of subgrain stripe on the exfoliation corrosion of Al-4.6Mg-3.1Zn (wt.%) alloy

Qingwei Ding et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dependence of microstructure, mechanical properties, and inter-granular corrosion behavior of Al-5.1Mg-3.0Zn-0.15Cu alloys with high temperature pre-treatment

Shengli Hou et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Reversion and re-aging of a peak aged Al-Zn-Mg-Cu alloy

Huan Zhao et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strengthening mechanism of age-hardenable Al-xMg-3Zn alloys

Qingwei Ding et al.

MATERIALS SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Solute clustering and precipitation of Al-5.1Mg-0.15Cu-xZn alloy

Shengli Hou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Review Multidisciplinary Sciences

Strategies for improving the sustainability of structural metals

Dierk Raabe et al.

NATURE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Significant strengthening in superlight Al-Mg alloy with an exceptionally large amount of Mg (13 wt%) after cold rolling

D. H. Jang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation hardening behavior and microstructure evolution of Al-5.1 Mg-0.15Cu alloy with 3.0Zn (wt%) addition

Shengli Hou et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy

Huan Zhao et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Crystallography

Method for Determining Crystal Grain Size by X-Ray Diffraction

Kai He et al.

CRYSTAL RESEARCH AND TECHNOLOGY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Parameter free quantitative analysis of atom probe data by correlation functions: Application to the precipitation in Al-Zn-Mg-Cu

Huan Zhao et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation and strengthening modeling for disk-shaped particles in aluminum alloys: Size distribution considered

Yue Li et al.

MATERIALIA (2018)

添加到收藏夹

Article Chemistry, Physical

Improved age-hardening response and altered precipitation behavior of Al-5.2Mg-0.45Cu-2.0Zn (wt%) alloy with pre-aging treatment

Cheng Cao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Engineering, Environmental

Potential recycling constraints due to future supply and demand of wrought and cast Al scrap-A closed system perspective on Austria

Hanno Buchner et al.

RESOURCES CONSERVATION AND RECYCLING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modeling over-ageing in Al-Mg-Si alloys by a multi-phase CALPHAD-coupled Kampmann-Wagner Numerical model

Qiang Du et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Cu addition on the precipitation hardening response and intergranular corrosion of Al-5.2Mg-2.0Zn (wt.%) alloy

Cheng Cao et al.

MATERIALS CHARACTERIZATION (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced and accelerated age hardening response of Al-5.2Mg-0.45Cu (wt%) alloy with Zn addition

Cheng Cao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of Cu on microstructure and tensile properties of 7XXX series aluminum alloy

Yu-guo Liao et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced bake-hardening response of an Al-Mg-Si-Cu alloy with Zn addition

M. X. Guo et al.

MATERIALS CHEMISTRY AND PHYSICS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strength contributions from precipitates

Bjorn Holmedal

PHILOSOPHICAL MAGAZINE LETTERS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy

D. Bardel et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Chemistry, Physical

Three-dimensional characterization of interaction between β precipitate and dislocation in Al-Mg-Si alloy

Kazuki Misumi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Chemistry, Physical

Mechanical properties, intergranular corrosion behavior and microstructure of Zn modified Al-Mg alloys

Chunyan Meng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of interrupted aging on the yield strength and uniform elongation of precipitation-hardened Al alloys

Y. Chen et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

A mathematical model coupled to CALPHAD to predict precipitation kinetics for multicomponent aluminum alloys

Q. Du et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Physics, Applied

Influence of the wavelength on the spatial resolution of pulsed-laser atom probe

B. Gault et al.

JOURNAL OF APPLIED PHYSICS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of alloy composition and heat treatment on precipitate composition in Al-Zn-Mg-Cu alloys

T. Marlaud et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Orowan strengthening and forest hardening superposition examined by dislocation dynamics simulations

Sylvain Queyreau et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

The development of recycle-friendly automotive aluminum alloys

Subodh K. Das et al.

JOM (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

The shearable-non-shearable transition in Al-Mg-Si-Cu precipitation hardening alloys: implications on the distribution of slip, work hardening and fracture

WJ Poole et al.

PHILOSOPHICAL MAGAZINE (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-temperature dislocation-precipitate interactions in Al alloys: An in situ transmission electron microscopy deformation study

BG Clark et al.

JOURNAL OF MATERIALS RESEARCH (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation strengthening of the aluminum alloy AA6111

X Wang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strengthening mechanisms of an Al-Mg-Sc-Zr alloy

KL Kendig et al.

ACTA MATERIALIA (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.