4.7 Article

Failure behaviors and processing maps with failure domains for hot compression of a powder metallurgy Ni-based superalloy

期刊

出版社

ELSEVIER
DOI: 10.1016/j.jmrt.2022.08.128

关键词

Processing maps; Thermo-mechanical processing; Ni-based superalloy; GTN model; Finite element analysis; Failure

资金

  1. National Key Research and Development Program of China [2021YFB3700404]

向作者/读者索取更多资源

This study investigates the failure behaviors of powder metallurgy (P/M) Ni-based superalloys using isothermal hot compression experiments and finite element analysis (FEA). The study constructs processing maps with failure domains based on predicted failure thresholds and demonstrates the strain-controlled failure mechanism. An optimized processing window for hot deformation is formulated to ensure good hot workability and avoid flow instability and failure.
Processing maps are key to guiding the thermo-mechanical processing (TMP) of superalloys. However, traditional processing maps are incapable of delimiting failure, which is an essential factor to be concerned about during the TMP of superalloys. Employing isothermal hot compression experiments and finite element analysis (FEA), the present study examined the failure behaviors of a powder metallurgy (P/M) Ni-based superalloy and constructed processing maps with failure domains based on the predicted failure threshold. The micromechanical Gurson-Tvergaard-Needleman (GTN) damage model was employed in the FEA to model the cavity-driven intergranular fracture of the superalloy. Deformation temperature and strain rate were considered in the range of 1050-1150 degrees C and 0.001-1 s(-1), respectively. The FEA results reveal that the maximum tensile stress locates at the outer budging surfaces of the samples, which causes failure initiation and subsequent propagation into longitudinal cracks, being consistent with the experiments. It is further demonstrated that the failure is strain-controlled and the critical failure strain remains nearly insensitive to the range of strain rates considered while increasing with the increase of temperature in a third-order polynomial. Finally, an optimized processing window for hot deformation of the superalloy is formulated to warrant good hot workability while avoiding flow instability and failure. The present study offers direct insights into the failure behaviors of P/M Ni-based superalloys and details a modeling strategy to delineate optimized parametric spaces for the TMP of superalloys. (C) 2022 The Author(s). Published by Elsevier B.V.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据