☆ 4.7 Article

A low-density high-entropy dual-phase alloy with hierarchical structure and exceptional specific yield strength

SCIENCE CHINA-MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Microstructures and Properties of the Low-Density Al15Zr40Ti28Nb12M(Cr, Mo, Si)5 High-Entropy Alloys

Yasong Li et al.

Summary: This study investigates the influence of Cr, Mo, and Si elements on the phase structures and properties of low-density Al-Zr-Ti-Nb high-entropy alloys, providing theoretical and scientific support for the development of advanced low-density alloys.

METALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nano-amorphous-crystalline dual-phase design of Al80Li5Mg5Zn5Cu5 multicomponent alloy

Hongzhen Li et al.

Summary: The design and fabrication of metallic materials with high strength, high ductility, and high thermal stability is a long-sought goal in materials science. In this study, a new strategy was proposed to design and fabricate bulk amorphous-crystalline dual-phase alloys with superior properties. The nano-amorphous phase exhibited unexpected thermal stability and improved mechanical properties, increasing the fracture strength and strain of the alloy. Additionally, the alloy showed higher strength than commonly used high-strength aluminum alloys at elevated temperatures. This research provides a new approach and concept for designing high-performance alloys with a balance between strength and plasticity.

SCIENCE CHINA-MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superior High-Temperature Strength in a Supersaturated Refractory High-Entropy Alloy

Rui Feng et al.

Summary: High-entropy alloys show promising applications at high temperatures and a single-phase alloy with high-temperature strength can be designed based on intrinsic material characteristics. The high-temperature strength retention is attributed to mechanisms such as large atomic-size and elastic-modulus mismatches, insensitive temperature dependence of elastic constants, and dominance of non-screw character dislocations caused by strong solute pinning.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Instruments & Instrumentation

Multi-physics instrument: Total scattering neutron time-of-flight diffractometer at China Spallation Neutron Source

Juping Xu et al.

Summary: The neutron beam shutter for the multi-physics instrument (MPI) at the China Spallation Neutron Source was opened for the first time on January 26, 2021. Initial measurements to characterize the instrument performance were reported, showing good agreement with design calculations. New scientific opportunities with the MPI were discussed and efforts to cultivate the user community have begun.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures

Mingliang Wang et al.

Summary: EHEAs are a hot topic in research due to their excellent properties, with the development of a novel AlCr1.3TiNi2 EHEA showing low density and outstanding mechanical properties. The new EHEA demonstrates higher hardness and specific yield strength values compared to traditional alloys.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-entropy intermetallic compound with ultra-high strength and thermal stability

Kunda Yao et al.

Summary: This study successfully developed a series of high-entropy intermetallic compounds (HEICs) with exceptional high-temperature phase stability and ultrahigh compressive strength. The mechanism underlying phase formation of HEICs was revealed by combining electronegativity-related parameters and atomic size dispersity.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of Bulk TiZrNbMoV and NbTiAlTaV High-Entropy Alloys by Powder Sintering

Yaqi Wu et al.

Summary: The refractory HEAs block material was prepared by powder sintering, resulting in bulk cubic alloy structure and complex metal compounds. The yield strengths were measured at 1201 and 700 MPa for TiZrNbMoV and NbTiAlTaV alloys, respectively.

METALS (2021)

添加到收藏夹

Article Chemistry, Physical

Predicting temperature-dependent ultimate strengths of body-centered-cubic (BCC) high-entropy alloys

B. Steingrimsson et al.

Summary: This paper introduces a bilinear log model for predicting the temperature-dependent ultimate strength of high-entropy alloys, considering the important parameter T-break. It also presents a global optimization technique and a general framework for joint optimization of alloy properties.

NPJ COMPUTATIONAL MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ductile Ti1.5ZrNbAl0.3 refractory high entropy alloy with high specific strength

Jingyu Pang et al.

Summary: The novel ductile body-centered cubic Ti1.5ZrNbAl0.3 refractory high entropy alloy exhibits high specific yield strength and fracture elongation, which may promote its applications as structural materials.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Order and Disorder in Amorphous and High-Entropy Materials

XueHui Yan et al.

Summary: Order and disorder, as well as the concept of entropy, play important roles in high-entropy alloys and amorphous alloys in materials science. Increasing disorder or entropy in materials is often necessary to meet complex performance requirements. Further research is needed to explore the role of entropy stabilization in high-entropy ceramics.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical properties of Ti3V2NbAlxNiy low-density refractory multielement alloys

Hongwei Yao et al.

Summary: A novel series of low-density refractory high-entropy alloys were developed through precipitation strengthening, showing superior balance between density and mechanical properties across a wide temperature range.

INTERMETALLICS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase evolution and mechanical properties of novel nanocrystalline Y-2(TiZrHfMoV)(2)O-7 high entropy pyrochlore

G. Karthick et al.

Summary: High entropy pyrochlores show potential as dispersoids in oxide dispersed strengthened steels or alloys for nuclear reactors and supercritical boilers. Y-2(TiZrHfMoV)(2)O-7 was synthesized with a nanocrystalline form and optimized to have lower crystallite and particle sizes. Different compositions showed variations in hardness and Young's modulus, with 4C-V having the highest hardness and 4C-Zr having a higher Young's modulus compared to other single-phase compositions.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys

Peijian Shi et al.

Summary: The study demonstrates a directionally solidified eutectic high-entropy alloy with a hierarchically organized herringbone structure that reconciles crack tolerance and high elongation. The self-buffering herringbone material achieves an ultrahigh uniform tensile elongation while maintaining strength.

SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Gradient cell-structured high-entropy alloy with exceptional strength and ductility

Qingsong Pan et al.

Summary: By introducing gradient nanoscaled dislocation cell structures in stable single-phase HEAs, enhanced strength can be achieved without apparent loss of ductility. The gradient structure induces the formation of high-density tiny stacking faults and twins, contributing to improved plasticity, increased strength, and work hardening.

SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

High-throughput design of high-performance lightweight high-entropy alloys

Rui Feng et al.

Summary: The study introduces a high-throughput computational method to design precipitation-strengthened lightweight high-entropy alloys for elevated-temperature applications. By integrating experimental and theoretical understanding, the accuracy of the thermodynamic database is improved, accelerating the discovery of advanced structural materials. This approach proves to be efficient and useful in screening promising high-entropy alloys for high-temperature applications.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Static and cyclic oxidation of Nb-Cr-V-W-Ta high entropy alloy in air from 600 to 1400 °C

S. K. Varma et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Functional properties and promising applications of high entropy alloys

Xuehui Yan et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A promising new class of irradiation tolerant materials: Ti2ZrHfV0.5Mo0.2 high-entropy alloy

Yiping Lu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Design of novel low-density refractory high entropy alloys for high-temperature applications

Z. Q. Xu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Graded microstructures of Al-Li-Mg-Zn-Cu entropic alloys under supergravity

Ruixuan Li et al.

SCIENCE CHINA-MATERIALS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

A light-weight high-entropy alloy Al20Be20Fe10Si15Ti35

Tseng KoKai et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase stability and transformation in a light-weight high-entropy alloy

Rui Feng et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and corrosion properties of the low-density single-phase compositionally complex alloy AlTiVCr

Y. Qiu et al.

CORROSION SCIENCE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Carbothermal shock synthesis of high-entropy-alloy nanoparticles

Yonggang Yao et al.

SCIENCE (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Science and technology in high-entropy alloys

Weiran Zhang et al.

SCIENCE CHINA-MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

A Low-Cost Lightweight Entropic Alloy with High Strength

Lei Shao et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes

Zhifeng Lei et al.

NATURE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

T. Yang et al.

SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation-strengthened refractory Al0.5CrNbTi2V0.5 high entropy alloy

N. D. Stepanov et al.

MATERIALS LETTERS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation

Suihe Jiang et al.

NATURE (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Serration and noise behaviors in materials

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A lightweight single-phase AITiVCr compositionally complex alloy

Y. Qiu et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Physics, Multidisciplinary

Design of Light-Weight High-Entropy Alloys

Rui Feng et al.

ENTROPY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of hot pressing temperature on microstructure, hardness and corrosion resistance of Al2NbTi3V2Zr high-entropy alloy

X. -R. Tan et al.

MATERIALS SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Chemistry, Physical

The generalized thermodynamic rule for phase selection in multicomponent alloys

Y. F. Ye et al.

INTERMETALLICS (2015)

添加到收藏夹

Article Chemistry, Physical

In-situ TEM observation of structural changes in nano-crystalline CoCrCuFeNi multicomponent high-entropy alloy (HEA) under fast electron irradiation by high voltage electron microscopy (HVEM)

Takeshi Nagase et al.

INTERMETALLICS (2015)

添加到收藏夹

Article Physics, Condensed Matter

Ab initio study of AlxMoNbTiV high-entropy alloys

Peiyu Cao et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

An AlNbTiVZr0.5 high-entropy alloy combining high specific strength and good ductility

N. D. Stepanov et al.

MATERIALS LETTERS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy

N. D. Stepanov et al.

MATERIALS LETTERS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Design of high entropy alloys: A single-parameter thermodynamic rule

Y. F. Ye et al.

SCRIPTA MATERIALIA (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures

Khaled M. Youssef et al.

MATERIALS RESEARCH LETTERS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase Stability of Low-Density, Multiprincipal Component Alloys Containing Aluminum, Magnesium, and Lithium

X. Yang et al.

JOM (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloys

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

High-Entropy Alloys: A Critical Review

Ming-Hung Tsai et al.

MATERIALS RESEARCH LETTERS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system: Microstructure and phase analysis

O. N. Senkov et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system

O. N. Senkov et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Prediction of high-entropy stabilized solid-solution in multi-component alloys

X. Yang et al.

MATERIALS CHEMISTRY AND PHYSICS (2012)

添加到收藏夹

Article Chemistry, Physical

Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys

O. N. Senkov et al.

INTERMETALLICS (2011)

添加到收藏夹

Article Physics, Applied

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys

Sheng Guo et al.

JOURNAL OF APPLIED PHYSICS (2011)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Microstructure and mechanical properties of MgMnAlZnCu high entropy alloy cooling in three conditions

Rui Li et al.

ADVANCED STRUCTURAL MATERIALS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solid-solution phase formation rules for multi-component alloys

Yong Zhang et al.

ADVANCED ENGINEERING MATERIALS (2008)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recent progress in high-entropy alloys

Jien-Wei Yeh

ANNALES DE CHIMIE-SCIENCE DES MATERIAUX (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element

A Takeuchi et al.

MATERIALS TRANSACTIONS (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.