☆ 4.7 Article

Computational Fluid Dynamics Simulation on Thermal Performance of Al/Al2O3/SWCNT Nanocoolants for Turning Operations

NANOMATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Proceedings Paper Materials Science, Multidisciplinary

Numerical investigation of forced convective heat transfer of nanofluids within an enclosure

Amal Chummar et al.

Summary: This study analyzes the heat transfer characteristics of nanofluids under forced convection and compares the results between assisting and opposing flow cases. The findings show that heat transfer characteristics improve with an increase in Reynolds number and volume concentration, and assisting flow exhibits better heat transfer than opposing flow.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

CFD simulation of laminar free convection flows of nanofluids in a cubical enclosure

Amal Chummar et al.

Summary: This paper investigates the heat transfer performance of nanofluids inside a cubical enclosure under natural convection flow condition. A three-dimensional two-phase mixture model is developed and validated for this investigation. The effects of particle volume concentration, particle diameter, and Grashof number on heat transfer are studied.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Thermodynamics

Effects of nanoparticle shape and size on the thermohydraulic performance of plate evaporator using hybrid nanofluids

Atul Bhattad et al.

Summary: The study investigated the use of hybrid nanofluids with different nanoparticle combinations as a secondary refrigerant to improve the heat transfer characteristics of plate evaporators. Copper oxide-copper hybrid nanofluids showed superior performance, while silica-copper hybrid nanofluids performed well in terms of exergetic efficiency. The shape and size of particles had a significant impact on heat transfer characteristics, with brick-shaped particles showing the most variation and platelet-shaped particles performing poorly.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Engineering, Mechanical

Turbulent thermal convection of nanofluids in cubical enclosure using two-phase mixture model

R. Harish et al.

Summary: This paper investigates the heat transfer characteristics of nanofluids within a wide range of Grashof numbers through numerical simulation. The study indicates that the random Brownian motion of nanoparticles enhances thermal convection, and the effect of volume fraction is more significant in transitional flows.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Chemical

Effects of nanoparticle dispersion on turbulent mixed convection flows in cubical enclosure considering Brownian motion and thermophoresis

R. Harish et al.

Summary: This numerical study investigates the mixed convection flows and heat transfer performance of nanofluids in a cubical enclosure under turbulent conditions. The results show higher temperature and turbulent kinetic energy distributions for opposing flows compared to assisting flows, with an increase in average heat transfer rate observed with a decrease in Richardson number and an increase in volume fraction for both flow types. Additionally, the effects of Brownian motion and thermophoresis are more pronounced in assisting flows.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Performance evaluation of the minimum quantity lubrication with Al2O3-mixed vegetable-oil-based cutting fluid in drilling of AISI 321 stainless steel

Amrit Pal et al.

Summary: Researchers are actively searching for renewable and biodegradable cutting lubricants, and in this study, the MQL technique with Al2O3-mixed vegetable-oil-based cutting fluid showed significant advantages, reducing drilling forces, surface roughness, drill tip temperature, and tool wear.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Influence of graphene nanofluid on various environmental factors during turning of M42 steel

V Anandan et al.

Summary: Graphene nanofluids show excellent performance in turning M42 steel, significantly reducing surface roughness, tool wear, and cutting temperature. They serve as a promising alternative to the minimum quantity lubrication system.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Conjugate heat transfer performance of stepped lid-driven cavity with Al2O3/water nanofluid under forced and mixed convection

Naveen Janjanam et al.

Summary: The study numerically analyzed the two-dimensional heat transfer performance of a stepped lid-driven cavity, considering Al2O3/water nanofluid with various nanoparticle concentrations. Simulations were conducted under different Reynolds and Grashof numbers, revealing that in certain cases, mixed convection shows better heat transfer performance than forced convection.

SN APPLIED SCIENCES (2021)

添加到收藏夹

Review Engineering, Multidisciplinary

Analytical and stability analysis of MHD flow past a nonlinearly deforming vertical surface in Carbon Nanotubes

Nur Syazana Anuar et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Engineering, Manufacturing

Influence of cutting fluid flow on tool wear in high-pressure coolant turning using a novel internally cooled insert

Zhenglong Fang et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Thermodynamics

CFD analysis of a nanofluid-based microchannel heat sink

Maher A. R. Sadiq Al-Baghdadi et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Nanofluids assisted environmental friendly lubricating strategies for the surface grinding of titanium alloy: Ti6Al4V-ELI

Harpinder Singh et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Thermodynamics

Numerical and experimental analysis of turbulent flow and heat transfer of minimum quantity lubrication in a turning process using discrete phase model

W. El-Bouri et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Engineering, Manufacturing

Experimental investigation on the performance and mechanism of graphene oxide nanofluids in turning Ti-6Al-4V

Shuang Yi et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Engineering, Chemical

CFD analysis of employing a novel ecofriendly nanofluid in a miniature pin fin heat sink for cooling of electronic components: Effect of different configurations

Mehdi Bahiraei et al.

ADVANCED POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Manufacturing

Performance appraisal of various nanofluids during hard machining of AISI 4340 steel

Anshuman Das et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Engineering, Chemical

Investigation of turbulent heat transfer and nanofluid flow in a double pipe heat exchanger

Mohammad Hussein Bahmani et al.

ADVANCED POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Thermodynamics

Buoyancy-driven flow of nanofluids in an inclined enclosure containing an adiabatic obstacle with heat generation/absorption: Effects of periodic thermal conditions

Sameh E. Ahmed et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Chemistry, Physical

CFD modeling of turbulent convection heat transfer of nanofluids containing green functionalized graphene nanoplatelets flowing in a horizontal tube: Comparison with experimental data

Rad Sadri et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

添加到收藏夹

Article Construction & Building Technology

Effect of heat source aspect ratio on turbulent thermal stratification in a naturally ventilated enclosure

R. Harish

BUILDING AND ENVIRONMENT (2018)

添加到收藏夹

Article Engineering, Mechanical

Buoyancy driven turbulent plume induced by protruding heat source in vented enclosure

R. Harish

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Energy & Fuels

A Stability Analysis of Solutions in Boundary Layer Flow and Heat Transfer of Carbon Nanotubes over a Moving Plate with Slip Effect

Nur Syazana Anuar et al.

ENERGIES (2018)

添加到收藏夹

Article Chemistry, Physical

Lorentz forces and nanoparticle shape on water based Cu, Al2O3 and SWCNTs

R. Dharmalingam et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

添加到收藏夹

Review Chemistry, Physical

Experimental investigations of nanofluids convective heat transfer in different flow regimes: A review

Kazem Bashirnezhad et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Evaluation of a Novel Controlled Cutting Fluid Impinging Supply System When Machining Titanium Alloys

Salah Gariani et al.

APPLIED SCIENCES-BASEL (2017)

添加到收藏夹

Article Engineering, Manufacturing

Experimental studies and CFD simulation of the internal cooling conditions when drilling Inconel 718

Ekrem Oezkaya et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Performance evaluation of vegetable emulsifier based green cutting fluid in turning of American Iron and Steel Institute (AISI) 1040 steel an initiative towards sustainable manufacturing

R. R. Srikant et al.

JOURNAL OF CLEANER PRODUCTION (2015)

添加到收藏夹

Article Thermodynamics

Natural Convection of a Nanofluid in Inclined, Partially Open Cavities: Thermal Effects

F. M. Hady et al.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2015)

添加到收藏夹

Review Engineering, Manufacturing

Nanofluids as a potential solution for Minimum Quantity Lubrication: A review

R. R. Srikant et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)

添加到收藏夹

Article Chemistry, Physical

Thermal properties of nanofluids

John Philip et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2012)

添加到收藏夹

Article Thermodynamics

Atomic interaction of functionalized carbon nanotube-based nanofluids with a heating surface and its effect on heat transfer

Weimin Gao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Engineering, Manufacturing

Experimental investigations of heat transfer coefficients of cutting fluids in metal cutting processes: analysis of workpiece phenomena in a given case study

Vanda M. Luchesi et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)

添加到收藏夹

Article Chemistry, Physical

A Long-Range Electric Field Solver for Molecular Dynamics Based on Atomistic-to-Continuum Modeling

Jeremy A. Templeton et al.

JOURNAL OF CHEMICAL THEORY AND COMPUTATION (2011)

添加到收藏夹

Article Engineering, Manufacturing

Experimental investigation of turning AISI 1045 steel using cryogenic carbon dioxide as the cutting fluid

B. Dilip Jerold et al.

Journal of Manufacturing Processes (2011)

添加到收藏夹

Article Thermodynamics

Numerical study of forced convective heat transfer of Nanofluids: Comparison of different approaches

R. Lotfi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Physics, Applied

Experimental investigation on thermal conductivity of nanofluids containing graphene oxide nanosheets

Wei Yu et al.

JOURNAL OF APPLIED PHYSICS (2010)

添加到收藏夹

Review Engineering, Manufacturing

Cooling techniques for improved productivity in turning

Vishal S. Sharma et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)

添加到收藏夹

Review Engineering, Chemical

Review of nanofluids for heat transfer applications

Dongsheng Wen et al.

PARTICUOLOGY (2009)

添加到收藏夹

Article Thermodynamics

Investigations of thermal conductivity and viscosity of nanofluids

S. M. S. Murshed et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2008)

添加到收藏夹

Review Green & Sustainable Science & Technology

A critical review of convective heat transfer of nanofluids

Weerapun Daungthongsuk et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2007)

添加到收藏夹

Article Thermodynamics

Convective transport in nanofluids

J Buongiorno

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.