☆ 4.6 Review

Current Advances of Three-Dimensional Bioprinting Application in Dentistry: A Scoping Review

MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Biomedical

Controlled Co-delivery of pPDGF-B and pBMP-2 from intraoperatively bioprinted bone constructs improves the repair of calvarial defects in rats

Kazim K. Moncal et al.

Summary: In this study, we demonstrated a novel approach to directly deliver gene-activated matrices into craniofacial defect sites through intraoperative bioprinting. The controlled co-delivery of growth factors from the bioprinted constructs resulted in improved bone tissue formation and coverage. This method shows promising potential for enhancing bone regeneration in patients with cranial injuries.

BIOMATERIALS (2022)

添加到收藏夹

Article Engineering, Biomedical

In vitro and in vivo characterization of a novel tricalcium silicate-based ink for bone regeneration using laser-assisted bioprinting

Nicolas Touya et al.

Summary: Laser-assisted bioprinting (LAB) offers high resolution and reproducibility for bone regeneration. This study developed a tricalcium silicate-based solidifying ink for bone repair and demonstrated its cytocompatibility and potential to promote bone volume formation in vitro and in vivo. However, LAB techniques with this ink failed to achieve complete bone repair.

BIOFABRICATION (2022)

添加到收藏夹

Review Chemistry, Physical

3D-Printed Hydroxyapatite and Tricalcium Phosphates-Based Scaffolds for Alveolar Bone Regeneration in Animal Models: A Scoping Review

Nurulhuda Mohd et al.

Summary: Three-dimensional-printed scaffolds using hydroxyapatite and tricalcium phosphates show promise for alveolar bone regeneration. However, further research is needed to determine the ideal scaffold material for load-bearing areas.

MATERIALS (2022)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Fabrication of bone-derived decellularized extracellular matrix/ceramic-based biocomposites and their osteo/odontogenic differentiation ability for dentin regeneration

Dongyun Kim et al.

Summary: The goal of this study was to fabricate bioactive cell-laden biocomposites supplemented with bone-derived decellularized extracellular matrix (dECM) with calcium phosphate ceramic and assess their effect on the osteogenic and odontogenic differentiation of human dental pulp stem cells (hDPSCs). The dECM-based biocomposites exhibited significantly higher osteogenic and odontogenic activities compared to collagen-based biocomposites, indicating their potential as promising biomaterials for dental tissue engineering.

BIOENGINEERING & TRANSLATIONAL MEDICINE (2022)

添加到收藏夹

Review Engineering, Chemical

A State-of-the-Art Review of Laser-Assisted Bioprinting and its Future Research Trends

Chaoran Dou et al.

Summary: Bioprinting technology, specifically laser-assisted bioprinting, offers high resolution and cell viability for precise cell control in reconstructing living organs. Recent studies highlight the developments, advantages, disadvantages, potential applications, technical challenges, and future research trends of LAB technologies.

CHEMBIOENG REVIEWS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

3D Bioprinting of Nature-Inspired Hydrogel Inks Based on Synthetic Polymers

Sonu Kumar et al.

Summary: 3D bioprinting is an important cell-printing technology for manufacturing artificial 3D structures and living organs in tissue engineering and regenerative medicine. Hydrogels are considered ideal candidates for bioink formulations in 3D printing due to their aqueous and 3D networked environment. Chemical insights can optimize mechanical, functional, and chemical properties for creating fabricated 3D objects with shape fidelity.

ACS APPLIED POLYMER MATERIALS (2021)

添加到收藏夹

Article Engineering, Biomedical

The performance of3Dbioscaffolding based on a human periodontal ligament stem cell printing technique

Yinping Tian et al.

Summary: Bone tissue is essential for supporting and protecting the human body, with bone defects posing a common source of injury. In clinical practice, 3D bioprinting of scaffolds offers a promising solution for reconstruction challenges. Utilizing hydrogels as biomaterials, this study successfully printed SA/Gel/na-HA bioscaffolds and demonstrated their biocompatibility and osteogenic differentiation capabilities using hPDLSCs, showing great potential for bone defect reconstruction.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Comparison of the Translational Potential of Human Mesenchymal Progenitor Cells from Different Bone Entities for Autologous 3D Bioprinted Bone Grafts

Anna-Klara Amler et al.

Summary: The process of 3D bioprinting offers new possibilities for personalized tissue implants and serves as an appealing alternative to autologous bone grafts. Choosing a suitable cell source is a crucial hurdle for the clinical application of 3D bioprinting, with periosteum-derived cells showing superior osteogenic potential and minimally invasive obtainability. Viability, mineralization, and gene expression analysis indicate that periosteum-derived cells are highly promising for translational bioprinting of bone tissue.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

添加到收藏夹

Article Cell Biology

Generation of biohybrid implants using a multipotent human periodontal ligament cell line and bioactive core materials

Taiga Ono et al.

Summary: By utilizing 3D bioprinting technology, PDL tissue-like structures were successfully generated from a multipotent human PDL cell line, and a new biohybrid implant system was developed by incorporating these structures with bioactive core materials. The study revealed that the complexes containing hydroxyapatite core had more positive cells, suggesting potential advantages for the development of the new implant system.

JOURNAL OF CELLULAR PHYSIOLOGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

3D bioprinting of tissue-specific osteoblasts and endothelial cells to model the human jawbone

Anna-Klara Amler et al.

Summary: The production of human jawbone models using projection-based stereolithography and 3D bioprinting was successful in expressing cell type-specific markers, demonstrating mineralization, and hinting at differentiation to an osteocyte phenotype. This in vitro model of the human jawbone presents key features of this special bone entity and shows promise for jawbone-specific research applications.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Engineering, Chemical

Additive Manufacturing of Astragaloside-Containing Polyurethane Nerve Conduits Influenced Schwann Cell Inflammation and Regeneration

Yueh-Sheng Chen et al.

Summary: This study successfully fabricated astragaloside-containing polyurethane nerve guidance conduits, demonstrating improved hydrophilicity and enhanced cellular proliferation, reduced inflammatory response, and increased neural regeneration markers.

PROCESSES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Intra-Operative Bioprinting of Hard, Soft, and Hard/Soft Composite Tissues for Craniomaxillofacial Reconstruction

Kazim K. Moncal et al.

Summary: The study demonstrates the intra-operative bioprinting of various craniomaxillofacial tissues directly on rats, including bone, skin, and composite tissues. A novel osteogenic hard tissue ink and droplet-based bioprinting technology facilitated substantial bone regeneration and accelerated wound closure in a stratified arrangement. The use of a hybrid approach resulted in significant skin wound closure and bone coverage, showcasing the potential for bioprinting technologies in clinical CMF defect reconstruction.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Decellularized Extracellular Matrix Composite Hydrogel Bioinks for the Development of 3D Bioprinted Head and Neck in Vitro Tumor Models

Jacqueline Kort-Mascort et al.

Summary: The composite material containing alginate and gelatin impart mechanical integrity to the biologically active decellularized ECM, resulting in a reinforced gel that is mechanically stable, bioprintable, and mimics tumor microenvironment characteristics. The cell-laden model generated using this hydrogel is highly reproducible, supports cell viability, and enables the production of spheroids with cross-sectional areas comparable to HNSCC tumors. This in vitro model system allows for evaluating the effectiveness of small molecule therapeutics for HNSCC treatment and shows increased resistance compared to traditional monolayer cultures.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2021)

添加到收藏夹

Article Polymer Science

Demineralized Dentin Matrix Particle-Based Bio-Ink for Patient-Specific Shaped 3D Dental Tissue Regeneration

Jonghyeuk Han et al.

Summary: A bio-ink based on demineralized dentin matrix (DDM) particles with enhanced 3D printability was developed for engineering dental tissues. The higher the DDM particle concentration, the better the printability and cell compatibility of the bio-ink, leading to improved printing resolution and stacking ability. The study demonstrated the successful fabrication of cellular constructs with 3D patient-specific shapes and clinically relevant sizes through co-printing with polycaprolactone and DDM particle-laden bio-ink.

POLYMERS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Biofabrication of Gingival Fibroblast Cell-Laden Collagen/Strontium-Doped Calcium Silicate 3D-Printed Bi-Layered Scaffold for Osteoporotic Periodontal Regeneration

Chen-Ying Wang et al.

Summary: The study utilized a 3D-printed cell-laden collagen/strontium-doped calcium silicate bi-layer scaffold for periodontal regeneration, showing enhanced osteoporotic bone regeneration. The scaffold increased secretion of relevant proteins and demonstrated guided periodontal regeneration, making it a potential candidate for future clinical applications.

BIOMEDICINES (2021)

添加到收藏夹

Article Cell Biology

Bioprinting on 3D Printed Titanium Scaffolds for Periodontal Ligament Regeneration

Ui-Lyong Lee et al.

Summary: The study shows that hybrid artificial organs manufactured using 3D printing technology can create structures similar to periodontal ligaments around implants, thereby increasing the amount of connective tissue.

CELLS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Bidirectional Differentiation of Human-Derived Stem Cells Induced by Biomimetic Calcium Silicate-Reinforced Gelatin Methacrylate Bioink for Odontogenic Regeneration

Yi-Ting Lin et al.

Summary: The study demonstrated that scaffolds containing calcium silicate improved the printability and printing quality, as well as enhanced odontogenesis by releasing silicate ions that activated signaling-related markers and promoted the expression of odontogenic-related markers. Calcium deposition was also significantly enhanced in the calcium silicate-containing scaffold.

BIOMEDICINES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electromagnetic field-assisted cell-laden 3D printed poloxamer-407 hydrogel for enhanced osteogenesis

Sayan Deb Dutta et al.

Summary: The study demonstrated the potential of 3D bioprinted P407 hydrogels to stimulate osteogenic differentiation of SCAPs, with high cell viability and acceleration of cell migration. The application of low voltage-frequency EMFs effectively improved dental tissue regeneration in vitro.

RSC ADVANCES (2021)

添加到收藏夹

Review Materials Science, Biomaterials

Recent progress in extrusion 3D bioprinting of hydrogel biomaterials for tissue regeneration: a comprehensive review with focus on advanced fabrication techniques

Mohsen Askari et al.

Summary: This study summarizes the recent advances in 3D bioprinting for functional tissue development over the past decade, focusing on key parameters such as bioink selection, printing conditions, and tissue scaffold design. It highlights both challenges and opportunities, as well as the latest bioprinted scaffold technologies.

BIOMATERIALS SCIENCE (2021)

添加到收藏夹

Article Cell Biology

Hand-held bioprinting for de novo vascular formation applicable to dental pulp regeneration

Daniela F. Duarte Campos et al.

CONNECTIVE TISSUE RESEARCH (2020)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Extracellular matrix-based scaffolding technologies for periodontal and peri-implant soft tissue regeneration

Lorenzo Tavelli et al.

JOURNAL OF PERIODONTOLOGY (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Hydrogel-based 3D bioprinting: A comprehensive review on cell-laden hydrogels, bioink formulations, and future perspectives

Janitha M. Unagolla et al.

APPLIED MATERIALS TODAY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanoengineered Osteoinductive Bioink for 3D Bioprinting Bone Tissue

David Chimene et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Review Engineering, Biomedical

Progress in 3D bioprinting technology for tissue/organ regenerative engineering

Ishita Matai et al.

BIOMATERIALS (2020)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Intraoperative Bioprinting: Repairing Tissues and Organs in a Surgical Setting

Yang Wu et al.

TRENDS IN BIOTECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Extracellular Matrix/Amorphous Magnesium Phosphate Bioink for 3D Bioprinting of Craniomaxillofacial Bone Tissue

Nileshkumar Dubey et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Engineering, Biomedical

The effect of BMP-mimetic peptide tethering bioinks on the differentiation of dental pulp stem cells (DPSCs) in 3D bioprinted dental constructs

Ji Hoon Park et al.

BIOFABRICATION (2020)

添加到收藏夹

Article Engineering, Biomedical

Recent advances in periodontal regeneration: A biomaterial perspective

Yongxi Liang et al.

BIOACTIVE MATERIALS (2020)

添加到收藏夹

Review Polymer Science

3D Bioprinting in Tissue Engineering for Medical Applications: The Classic and the Hybrid

Zelong Xie et al.

POLYMERS (2020)

添加到收藏夹

Review Polymer Science

Current Advances in 3D Bioprinting Technology and Its Applications for Tissue Engineering

JunJie Yu et al.

POLYMERS (2020)

添加到收藏夹

Article Veterinary Sciences

The Influence of Ficus deltoidea in Preserving Alveolar Bone in Ovariectomized Rats

N. I. Omar et al.

VETERINARY MEDICINE INTERNATIONAL (2020)

添加到收藏夹

Review Health Care Sciences & Services

Updated methodological guidance for the conduct of scoping reviews

Micah D. J. Peters et al.

JBI EVIDENCE SYNTHESIS (2020)

添加到收藏夹

Review Oncology

Dental stem cell and dental tissue regeneration

Qiming Zhai et al.

FRONTIERS OF MEDICINE (2019)

添加到收藏夹

Article Multidisciplinary Sciences

In Situ Bioprinting of Autologous Skin Cells Accelerates Wound Healing of Extensive Excisional Full-Thickness Wounds

Mohammed Albanna et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Review Engineering, Biomedical

The bone regeneration capacity of 3D-printed templates in calvarial defect models: A systematic review and meta-analysis

Mohamad Nageeb Hassan et al.

ACTA BIOMATERIALIA (2019)

添加到收藏夹

Review Cell Biology

Mesenchymal Stem Cells for Regenerative Medicine

Yu Han et al.

CELLS (2019)

添加到收藏夹

Review Biochemistry & Molecular Biology

Recent Development in the Fabrication of Collagen Scaffolds for Tissue Engineering Applications: A Review

Mohammad F. Mh Busra et al.

CURRENT PHARMACEUTICAL BIOTECHNOLOGY (2019)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Optimization of 3D bioprinting of periodontal ligament cells

Nimal Thattaruparambil Raveendran et al.

DENTAL MATERIALS (2019)

添加到收藏夹

Review Orthopedics

Natural hydrogels for cartilage regeneration: Modification, preparation and application

Lan Li et al.

JOURNAL OF ORTHOPAEDIC TRANSLATION (2019)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

3D Bioprinting: principles, fantasies and prospects

N. Sigaux et al.

JOURNAL OF STOMATOLOGY ORAL AND MAXILLOFACIAL SURGERY (2019)

添加到收藏夹

Article Engineering, Biomedical

In situ prevascularization designed by laser-assisted bioprinting: effect on bone regeneration

Olivia Kerouredan et al.

BIOFABRICATION (2019)

添加到收藏夹

Article Cell & Tissue Engineering

Bioprinting of three-dimensional dentin-pulp complex with local differentiation of human dental pulp stem cells

Jonghyeuk Han et al.

JOURNAL OF TISSUE ENGINEERING (2019)

添加到收藏夹

Article Engineering, Biomedical

A definition of bioinks and their distinction from biomaterial inks

J. Groll et al.

BIOFABRICATION (2019)

添加到收藏夹

Review Biochemistry & Molecular Biology

Mesenchymal Stem Cells of Dental Origin for Inducing Tissue Regeneration in Periodontitis: A Mini-Review

Beatriz Hernandez-Monjaraz et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)

添加到收藏夹

Review Nanoscience & Nanotechnology

Biofabrication strategies for 3D in vitro models and regenerative medicine

Lorenzo Moroni et al.

NATURE REVIEWS MATERIALS (2018)

添加到收藏夹

Article Medicine, General & Internal

PRISMA Extension for Scoping Reviews (PRISMA-ScR): Checklist and Explanation

Andrea C. Tricco et al.

ANNALS OF INTERNAL MEDICINE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Magnetic Resonance Imaging for tracking cellular patterns obtained by Laser-Assisted Bioprinting

Olivia Kerouredan et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Review Engineering, Biomedical

3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances

Soroosh Derakhshanfar et al.

BIOACTIVE MATERIALS (2018)

添加到收藏夹

Article Engineering, Biomedical

A dentin-derived hydrogel bioink for 3D bioprinting of cell laden scaffolds for regenerative dentistry

Avathamsa Athirasala et al.

BIOFABRICATION (2018)

添加到收藏夹

Review Engineering, Biomedical

Recent Advances in Biomaterials for 3D Printing and Tissue Engineering

Udayabhanu Jammalamadaka et al.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2018)

添加到收藏夹

Article Engineering, Biomedical

Development of a 3D cell printed structure as an alternative to autologs cartilage for auricular reconstruction

Ju Young Park et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

The Role of Vasculature Engineering in Dental Pulp Regeneration

Waruna Lakmal Dissanayaka et al.

JOURNAL OF ENDODONTICS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Short-term hypoxic preconditioning promotes prevascularization in 3D bioprinted bone constructs with stromal vascular fraction derived cells

Mitchell A. Kuss et al.

RSC ADVANCES (2017)

添加到收藏夹

Article Cell & Tissue Engineering

Guided Bone Regeneration Using Autologous Plasma, Bone Marrow Cells and β-TCP/HA Granules for Experimental Alveolar Ridge Reconstruction in Macaca fascicularis

Sharen Aini Shamsuddin et al.

JOURNAL OF BIOMATERIALS AND TISSUE ENGINEERING (2017)

添加到收藏夹

Review Materials Science, Biomaterials

Microvalve-based bioprinting - process, bio-inks and applications

Wei Long Ng et al.

BIOMATERIALS SCIENCE (2017)

添加到收藏夹

Review Biochemical Research Methods

A brief review of extrusion-based tissue scaffold bio-printing

Liqun Ning et al.

BIOTECHNOLOGY JOURNAL (2017)

添加到收藏夹

Article Materials Science, Biomaterials

Bioprinting-Based PDLSC-ECM Screening for in Vivo Repair of Alveolar Bone Defect Using Cell-Laden, Injectable and Photocrosslinkable Hydrogels

Yufei Ma et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Biomaterials

Bioprinting-Based PDLSC-ECM Screening for in Vivo Repair of Alveolar Bone Defect Using Cell-Laden, Injectable and Photocrosslinkable Hydrogels

Yufei Ma et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)

添加到收藏夹

Article Multidisciplinary Sciences

In situ printing of mesenchymal stromal cells, by laser-assisted bioprinting, for in vivo bone regeneration applications

Virginie Keriquel et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Review Anatomy & Morphology

Role of Mesenchymal Stem Cells in Bone Regenerative Medicine: What Is the Evidence?

Ahmad Oryan et al.

CELLS TISSUES ORGANS (2017)

添加到收藏夹

Review Engineering, Biomedical

A comprehensive review on droplet-based bioprinting: Past, present and future

Hemanth Gudapati et al.

BIOMATERIALS (2016)

添加到收藏夹

Review Engineering, Biomedical

Current advances and future perspectives in extrusion-based bioprinting

Ibrahim T. Ozbolat et al.

BIOMATERIALS (2016)

添加到收藏夹

Review Biotechnology & Applied Microbiology

3D bioprinting for engineering complex tissues

Christian Mandrycky et al.

BIOTECHNOLOGY ADVANCES (2016)

添加到收藏夹

Article Biotechnology & Applied Microbiology

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity

Hyun-Wook Kang et al.

NATURE BIOTECHNOLOGY (2016)

添加到收藏夹

Review Materials Science, Biomaterials

3D Printed Tissue Models: Present and Future

Jinah Jang et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

添加到收藏夹

Review Materials Science, Biomaterials

3D Printed Tissue Models: Present and Future

Jinah Jang et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

添加到收藏夹

Review Medicine, General & Internal

Rayyan-a web and mobile app for systematic reviews

Mourad Ouzzani et al.

SYSTEMATIC REVIEWS (2016)

添加到收藏夹

Article Engineering, Biomedical

Micro-precise spatiotemporal delivery system embedded in 3D printing for complex tissue regeneration

Solaiman Tarafder et al.

BIOFABRICATION (2016)

添加到收藏夹

Article Engineering, Biomedical

A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage

Andrew C. Daly et al.

BIOFABRICATION (2016)

添加到收藏夹

Review Engineering, Biomedical

Bioink properties before, during and after 3D bioprinting

Katja Hoelzl et al.

BIOFABRICATION (2016)

添加到收藏夹

Article Engineering, Biomedical

A hydrogel bioink toolkit for mimicking native tissue biochemical and mechanical properties in bioprinted tissue constructs

Aleksander Skardal et al.

ACTA BIOMATERIALIA (2015)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering

F. Obregon et al.

JOURNAL OF DENTAL RESEARCH (2015)

添加到收藏夹

Article Orthopedics

Advances in biology and mechanics of rotator cuff repair

Olaf Lorbach et al.

KNEE SURGERY SPORTS TRAUMATOLOGY ARTHROSCOPY (2015)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Bioprinting scale-up tissue and organ constructs for transplantation

Ibrahim T. Ozbolat

TRENDS IN BIOTECHNOLOGY (2015)

添加到收藏夹

Review Chemistry, Physical

Biodegradable Materials for Bone Repair and Tissue Engineering Applications

Zeeshan Sheikh et al.

MATERIALS (2015)

添加到收藏夹

Article Engineering, Biomedical

Bioprinting 3D cell-laden hydrogel microarray for screening human periodontal ligament stem cell response to extracellular matrix

Yufei Ma et al.

BIOFABRICATION (2015)

添加到收藏夹

Article Engineering, Biomedical

Synthetic Mimics of the Extracellular Matrix: How Simple is Complex Enough?

Kyle A. Kyburz et al.

ANNALS OF BIOMEDICAL ENGINEERING (2015)

添加到收藏夹

Review Engineering, Biomedical

Strategies for directing the structure and function of three-dimensional collagen biomaterials across length scales

B. D. Walters et al.

ACTA BIOMATERIALIA (2014)

添加到收藏夹

Article Engineering, Biomedical

Mesenchymal stem cell characteristics of dental pulp and periodontal ligament stem cells after in vivo transplantation

Ming Lei et al.

BIOMATERIALS (2014)

添加到收藏夹

Article Engineering, Biomedical

The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability

Thomas Billiet et al.

BIOMATERIALS (2014)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Global Burden of Severe Periodontitis in 1990-2010: A Systematic Review and Metaregression

N. J. Kassebaum et al.

JOURNAL OF DENTAL RESEARCH (2014)

添加到收藏夹

Review Biotechnology & Applied Microbiology

3D bioprinting of tissues and organs

Sean V. Murphy et al.

NATURE BIOTECHNOLOGY (2014)

添加到收藏夹

Article Cell & Tissue Engineering

TISSUE ENGINEERED BONE USING SELECT GROWTH FACTORS: A COMPREHENSIVE REVIEW OF ANIMAL STUDIES AND CLINICAL TRANSLATION STUDIES IN MAN

D. Gothard et al.

EUROPEAN CELLS & MATERIALS (2014)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Global Burden of Oral Conditions in 1990-2010: A Systematic Analysis

W. Marcenes et al.

JOURNAL OF DENTAL RESEARCH (2013)

添加到收藏夹

Article Geriatrics & Gerontology

Fibroblast Growth Factor-2 and Bone Morphogenetic Protein-2 Have a Synergistic Stimulatory Effect on Bone Formation in Cell Cultures From Elderly Mouse and Human Bone

Liisa T. Kuhn et al.

JOURNALS OF GERONTOLOGY SERIES A-BIOLOGICAL SCIENCES AND MEDICAL SCIENCES (2013)

添加到收藏夹

Article Materials Science, Biomaterials

Dynamic viscoelastic properties of collagen gels with high mechanical strength

Hideki Mori et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)

添加到收藏夹

Article Cell & Tissue Engineering

Three-Dimensional-Engineered Matrix to Study Cancer Stem Cells and Tumorsphere Formation: Effect of Matrix Modulus

Xiaoming Yang et al.

TISSUE ENGINEERING PART A (2013)

添加到收藏夹

Article Cell & Tissue Engineering

Controlled Release Strategies for Bone, Cartilage, and Osteochondral Engineering-Part II: Challenges on the Evolution from Single to Multiple Bioactive Factor Delivery

Vitor E. Santo et al.

TISSUE ENGINEERING PART B-REVIEWS (2013)

添加到收藏夹

Article Materials Science, Biomaterials

Bio-ink properties and printability for extrusion printing living cells

Johnson H. Y. Chung et al.

BIOMATERIALS SCIENCE (2013)

添加到收藏夹

Review Engineering, Biomedical

Collagen for bone tissue regeneration

Ana Marina Ferreira et al.

ACTA BIOMATERIALIA (2012)

添加到收藏夹

Review Cell & Tissue Engineering

Mesenchymal Stromal Cells: New Directions

Armand Keating

CELL STEM CELL (2012)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Coculture of Dental Pulp Stem Cells with Endothelial Cells Enhances Osteo-/Odontogenic and Angiogenic Potential In Vitro

Waruna Lakmal Dissanayaka et al.

JOURNAL OF ENDODONTICS (2012)

添加到收藏夹

Article Medicine, General & Internal

Translational Research Challenges: Finding the Right Animal Models

Sharma Prabhakar

JOURNAL OF INVESTIGATIVE MEDICINE (2012)

添加到收藏夹

Article Cell & Tissue Engineering

Efficacy of Periodontal Stem Cell Transplantation in the Treatment of Advanced Periodontitis

Joo-Young Park et al.

CELL TRANSPLANTATION (2011)

添加到收藏夹

Article Critical Care Medicine

Mesenchymal stem cells and bone regeneration: Current status

Elena Jones et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2011)

添加到收藏夹

Article Cell & Tissue Engineering

MiR-17 Modulates Osteogenic Differentiation Through a Coherent Feed-Forward Loop in Mesenchymal Stem Cells Isolated from Periodontal Ligaments of Patients with Periodontitis

Yali Liu et al.

STEM CELLS (2011)

添加到收藏夹

Article Cell & Tissue Engineering

Characterization of Stem Cells from Alveolar Periodontal Ligament

Lei Wang et al.

TISSUE ENGINEERING PART A (2011)

添加到收藏夹

Review Engineering, Biomedical

A review on endogenous regenerative technology in periodontal regenerative medicine

Fa-Ming Chen et al.

BIOMATERIALS (2010)

添加到收藏夹

Article Engineering, Biomedical

In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice

Virginie Keriquel et al.

BIOFABRICATION (2010)

添加到收藏夹

Article Engineering, Biomedical

Scaffold-free vascular tissue engineering using bioprinting

Cyrille Norotte et al.

BIOMATERIALS (2009)

添加到收藏夹

Article Engineering, Biomedical

Organ printing: Tissue spheroids as building blocks

Vladimir Mironov et al.

BIOMATERIALS (2009)

添加到收藏夹

Review Cell & Tissue Engineering

Concise review: Mesenchymal stem cells: Their phenotype, differentiation capacity, immunological features, and potential for homing

Giselle Chamberlain et al.

STEM CELLS (2007)

添加到收藏夹

Article Biochemistry & Molecular Biology

Human postnatal dental pulp cells co-differentiate into osteoblasts and endotheliocytes: a pivotal synergy leading to adult bone tissue formation

R. d'Aquino et al.

CELL DEATH AND DIFFERENTIATION (2007)

添加到收藏夹

Review Biochemistry & Molecular Biology

Playing with bone and fat

JM Gimble et al.

JOURNAL OF CELLULAR BIOCHEMISTRY (2006)

添加到收藏夹

Article Critical Care Medicine

Bone substitutes: An update

PV Giannoudis et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2005)

添加到收藏夹

Article Physiology

Extracellular matrix (ECM) microstructural composition regulates local cell-ECM biomechanics and fundamental fibroblast behavior: a multidimensional perspective

AM Pizzo et al.

JOURNAL OF APPLIED PHYSIOLOGY (2005)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Morbidity of harvesting of bone grafts from the iliac crest for preprosthetic augmentation procedures: A prospective study

E Nkenke et al.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2004)

添加到收藏夹

Article Medicine, General & Internal

Investigation of multipotent postnatal stem cells from human periodontal ligament

BM Seo et al.

LANCET (2004)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Tissue engineering of complex tooth structures on biodegradable polymer scaffolds

CS Young et al.

JOURNAL OF DENTAL RESEARCH (2002)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Stem cell properties of human dental pulp stem cells

S Gronthos et al.

JOURNAL OF DENTAL RESEARCH (2002)

添加到收藏夹

Article Multidisciplinary Sciences

Postnatal human dental pulp stem cells (DPSCs) in vitro and in vivo

S Gronthos et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.