☆ 4.8 Article

Evaluation of the Passivation Effects of PEDOT:PSS on Inverted Perovskite Solar Cells

ADVANCED ENERGY MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Several Triazine-Based Small Molecules Assisted in the Preparation of High-Performance and Stable Perovskite Solar Cells by Trap Passivation and Heterojunction Engineering

Yapeng Sun et al.

Summary: In this study, the perovskite film was modified using different functional groups, which optimized the crystallization and reduced trap density. The heterojunction structure formed by p-type modification improved charge transfer and collection, leading to enhanced device performance. A second modification was used to achieve excellent moisture and thermal stability, as well as reducing lead pollution.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Engineering, Environmental

Exploring low-temperature processed multifunctional HEPES-Au NSs-modified SnO2 for efficient planar perovskite solar cells

Lin Fan et al.

Summary: Introducing HEPES-Au NSs into a SnO2 ETL can improve electronic properties and interface quality, leading to higher efficiency in perovskite solar cells. The chemical bond interaction and surface adsorption brought by HEPES-Au NSs play a crucial role in enhancing the performance of PSCs.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Engineering the Hole Extraction Interface Enables Single-Crystal MAPbI3 Perovskite Solar Cells with Efficiency Exceeding 22% and Superior Indoor Response

Ning Li et al.

Summary: In this study, hydrophobic P3HT molecules were successfully incorporated into the hole transport layer of perovskite single crystals, resulting in reduced interface and bulk defect density, suppressed nonradiative recombination, accelerated charge transport, and extraction. This led to a significantly enhanced open-circuit voltage and efficiency, making it the highest values achieved for MAPbI(3) single-crystal solar cells. Additionally, the incorporation of P3HT resulted in superior weak light response and an indoor photovoltaic efficiency of 39.2% at 1000 lux irradiation.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Passivation of iodine vacancies of perovskite films by reducing iodine to triiodide anions for high-performance photovoltaics

Yifang Qi et al.

Summary: This study reports a method to passivate the defects in inverted perovskite solar cells (PSCs) using tetrabutylammonium chloride (TABCl), which also modifies iodine vacancies and enhances device performance and stability.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells

Zhen Li et al.

Summary: Functionalizing the interfaces of multication and halide perovskite solar cells with an organometallic compound, ferrocenyl-bis-thiophene-2-carboxylate (FcTc(2)), enhances their efficiency and stability. The resulting devices exhibit high performance and stability, as demonstrated by tests and continuous operation.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Employing 2D-Perovskite as an Electron Blocking Layer in Highly Efficient (18.5%) Perovskite Solar Cells with Printable Low Temperature Carbon Electrode

Salma Zouhair et al.

Summary: This study introduces a new structure of solar cell using 2D perovskite as an electron blocking layer, which can substantially reduce interfacial losses and significantly improve the stability of the device.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemically Stable Carbazole-Derived Polyaniline for Pseudocapacitors

Mohammed Almtiri et al.

Summary: Supercapacitor energy storage devices have high energy and power densities and longer operational lifetimes. Research has focused on improving the specific capacitance, but emerging technologies demand competitive performance in terms of scalability and electrochemical stability. A polyaniline derivative was developed for electrodes, exhibiting good solubility and excellent cyclic stability.

ACS APPLIED POLYMER MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

PEDOT:PSS/CuCl Composite Hole Transporting Layer for Enhancing the Performance of 2D Ruddlesden-Popper Perovskite Solar Cells

Xun Zhu et al.

Summary: Doping copper chloride into PEDOT:PSS improves the coating performance and crystal growth of 2D perovskite films, enhancing the efficiency and stability of devices. This modified PEDOT:PSS material shows promise for mass production in electrical devices.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

Non-Fullerene Acceptor Doped Block Copolymer for Efficient and Stable Organic Solar Cells

Yue Wu et al.

Summary: In this study, the addition of a small-molecule additive, Y6, improves the packing of the acceptor blocks in the block copolymer, leading to enhanced electron transport and improved device efficiency. Furthermore, the device stability is significantly improved by restricting molecular motion through the padding of Y6 into the nanovoids of the copolymer matrix.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Optimized carrier extraction at interfaces for 23.6% efficient tin-lead perovskite solar cells

Shuaifeng Hu et al.

Summary: In this study, carrier extraction in mixed tin-lead perovskite solar cells is improved by modifying the surfaces with ethylenediammonium diiodide and glycine hydrochloride. The modified solar cells show improved performance and stability, with efficiencies of up to 23.6% and retaining over 80% of initial efficiency after 200 hours of continuous operation.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

All-vacuum deposited perovskite solar cells with glycine modified NiOx hole-transport layers

Cheng Fang et al.

Summary: Organic-inorganic hybrid perovskite solar cells (PSCs) have gained significant research attention due to their high efficiency and low cost. However, the use of expensive organic materials as hole-transport layers (HTLs) in PSCs with high efficiencies contradicts the low-cost concept. In this study, a facile strategy using self-assembled glycine molecules to treat the NiOx surface was developed to overcome the limitations of NiOx as an HTL. The treated NiOx exhibited improved charge extraction efficiency and resulted in PSCs with higher crystallinity and champion power conversion efficiency (PCE) of 17.96%.

RSC ADVANCES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phenoxazine-Containing Polyaniline Derivatives with Improved Electrochemical Stability and Processability

Mohammed Almtiri et al.

Summary: Two polyaniline derivatives, P1 and P2, with outstanding electrochemical stability and high conductivity, particularly when exposed to m-cresol vapors, have been prepared by researchers. P1 exhibits highly conductive sheet-like structures in the presence of m-cresol vapor, making it suitable for applications requiring stable redox conductive polymers.

ACS APPLIED POLYMER MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improving the Photovoltage of Blade-Coated MAPbI3 Perovskite Solar Cells via Surface and Grain Boundary Passivation with π-Conjugated Phenyl Boronic Acids

Mazhar Abbas et al.

Summary: The study investigated the passivation effects of four organic pi-conjugated phenylboronic acid molecules on perovskite materials, finding that addition of 3-amino phenylboronic acid (3a) significantly improved the photovoltaic performance of solar devices. Devices treated with 3a showed the best passivation effect, leading to increased open-circuit voltage and power conversion efficiency.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Chemistry, Physical

Ambient Fabrication of Organic-Inorganic Hybrid Perovskite Solar Cells

Yuan Zhang et al.

Summary: Organic-inorganic hybrid perovskite solar cells have been widely studied for their high power conversion efficiency, simple fabrication, and low cost. However, their sensitivity to moisture and oxygen has led to challenges in constructing them in inert environments. Recent progress in fabricating efficient and stable PSCs in ambient conditions shows promise for successful commercialization.

SMALL METHODS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic Effects of Cation and Anion in an Ionic Imidazolium Tetrafluoroborate Additive for Improving the Efficiency and Stability of Half-Mixed Pb-Sn Perovskite Solar Cells

Hongki Kim et al.

Summary: Additive engineering using IMBF4 is proposed to enhance the optoelectronic performance of half-mixed Pb-Sn perovskites, leading to longer carrier lifetimes. The best-performing half-mixed Pb-Sn PSC demonstrates an efficiency above 19% with negligible hysteresis and a degradation lifetime to 80% of 53.5 hours under continuous illumination in a nitrogen-filled glovebox.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Highly stable perovskite solar cells based on perovskite/NiO-graphene composites and NiO interface with 25.9 mA/cm2 photocurrent density and 20.8% efficiency

Tahmineh Mahmoudi et al.

Summary: This study proposes an innovative approach to enhance the stability and performance of perovskite solar cells by utilizing functional composites, achieving high power conversion efficiency, photocurrent density, and long-term stability.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stabilizing Fullerene for Burn-in-Free and Stable Perovskite Solar Cells under Ultraviolet Preconditioning and Light Soaking

Pengjie Hang et al.

Summary: Introducing Bphen in perovskite solar cells stabilizes the C-60-cage through formation of stable charge-transfer complexes, achieving efficient devices. The resulting devices demonstrate good stability under simulated conditions.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Phase Separation to Improve the Conductivity and Work Function of the PEDOT:PSS Solution for Silicon Hybrid Solar Cells

Qi Geng et al.

Summary: By modifying the PEDOT:PSS solution through heat treatment, the electrical conductivity and work function of the PEDOT:PSS film were improved, leading to enhanced performance of PEDOT:PSS/Si hybrid solar cells.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Phosphorene Nanoribbon-Augmented Optoelectronics for Enhanced Hole Extraction

Thomas J. Macdonald et al.

Summary: Phosphorene nanoribbons (PNRs) have demonstrated enhanced hole mobility in both solar cells and space-charge-limited-current devices, showing promise for improving hole extraction in various optoelectronic applications. The presence of PNRs drives more effective carrier extraction and improves both hole mobility and conductivity, providing experimental evidence that the predicted superlative functional properties of PNRs indeed translate to improved optoelectronic performance.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Efficient PTB7-Th:Y6:PC71BM ternary organic solar cell with superior stability processed by chloroform

Zhipeng Yin et al.

Summary: The research reveals the importance of appropriate phase separation/blend morphology in device performance, which can be achieved through the use of a ternary strategy or suitable solvent.

ORGANIC ELECTRONICS (2021)

添加到收藏夹

Article Chemistry, Physical

Quantifying the Absorption Onset in the Quantum Efficiency of Emerging Photovoltaic Devices

Osbel Almora et al.

Summary: The text explores the use of external quantum efficiency (EQE) spectrum to evaluate energy-dependent photocurrent losses in photovoltaic devices. It discusses the estimation of theoretical short-circuit current and photovoltaic bandgap energy from the EQE spectrum, as well as the analysis of sigmoid wavelength range in determining absorption onset steepness. Additionally, it examines the relationship between photovoltage losses and implications on the photocurrent Shockley-Queisser (SQ) model.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Propylammonium Chloride Additive for Efficient and Stable FAPbI3 Perovskite Solar Cells

Yong Zhang et al.

Summary: In this study, n-propylammonium chloride (PACl) is proposed as an alternative to methylammonium chloride (MACl) to improve the stability and efficiency of FAPbI(3)-based perovskite solar cells. The addition of PACl increases perovskite grain size and significantly prolongs carrier lifetime. Compared to MACl, the PACl additive leads to better stability against moisture due to the in situ formed barrier at the bulk perovskite.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Non-Halogenated-Solvent Processed and Additive-Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

Shucheng Qin et al.

Summary: This study successfully fabricated high-performance tandem OSCs using solution processing with non-halogenated solvents without additives. The two active layers showed better phase segregation and charge transport properties, leading to an efficiency of up to 16.67%.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tailoring the Interface in FAPbI3 Planar Perovskite Solar Cells by Imidazole-Graphene-Quantum-Dots

Zhi-Wen Gao et al.

Summary: I-GQDs regulate the interface, improve the quality of perovskite, reduce defects, and extend carrier lifetime, resulting in high efficiency of 22.37% and enhanced long-term stability in planar FAPbI(3) PSCs.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Solar-Powered Supercapacitors Integrated with a Shared Electrode

Dinh Cung Tien Nguyen et al.

Summary: The research presents a compact solar-powered integrated supercapacitor (SPIS) with a three-electrode configuration, using modified graphene oxide-incorporated poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) as the common electrode. The SPIS can fully charge the supercapacitor within a short period, making it an effective self-powered pack.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Defect Passivation through Cyclohexylethylamine Post-treatment for High-Performance and Stable Perovskite Solar Cells

Mingyue Liao et al.

Summary: The introduction of the stabilizing molecule CHEA improves the stability and efficiency of perovskite optoelectronic devices by reducing defect sites and improving crystallinity through the formation of Lewis adducts. The stability and performance of PSCs are enhanced, with the power conversion efficiency significantly improved from 18.05% to 21.53% by optimizing the concentration of CHEA.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

添加到收藏夹

Article Chemistry, Physical

High-Efficiency (>14%) and Air-Stable Carbon-Based, All-Inorganic CsPbI2Br Perovskite Solar Cells through a Top-Seeded Growth Strategy

Weidong Zhu et al.

Summary: The use of top-seeded solution growth technique in preparing CsPbI2Br films enhances their quality and stability, resulting in improved efficiency and stability of carbon-based, all-inorganic perovskite solar cells.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Multifunctional Chemical Bridge and Defect Passivation for Highly Efficient Inverted Perovskite Solar Cells

Qisen Zhou et al.

Summary: By constructing a chemical bridge at the interface of PTAA/perovskites, interfacial recombination of charge carriers is minimized, leading to improved efficiency and negligible hysteresis in inverted perovskite solar cells.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors

Rui Sun et al.

Summary: The study focuses on developing high-performance all-polymer solar cells by designing a novel polymer acceptor PY2F-T and enhancing efficiency through ternary blend with PYT in the PM6: PY2F-T host system. This approach significantly improves power conversion efficiency and stability, marking a promising future for the application of all-PSCs.

JOULE (2021)

添加到收藏夹

Article Chemistry, Physical

Surface Modification of PEDOT:PSS for Enhanced Performance of Inverted Perovskite Solar Cells

Puan Lin et al.

Summary: By modifying the surface of PEDOT:PSS with GMS, the photovoltaic devices based on MAPbI(3) films have improved power conversion efficiencies and better moisture stability and thermal stability compared to devices without GMS modification.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

In2O3:H-Based Hole-Transport-Layer-Free Tin/Lead Perovskite Solar Cells for Efficient Four-Terminal All-Perovskite Tandem Solar Cells

Somayeh Moghadamzadeh et al.

Summary: This study demonstrates a significant increase in photocurrent for all-perovskite tandem solar cells by removing the hole-transport layer and using hydrogen-doped indium oxide electrodes. The IO:H-based solar cells achieved a higher power conversion efficiency compared to the commonly used ITO, highlighting the potential of utilizing this material in photovoltaic applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

1,10-Phenanthroline as an Efficient Bifunctional Passivating Agent for MAPbI3 Perovskite Solar Cells

Ali Buyruk et al.

Summary: By introducing 1,10-phenanthroline, defects on the surface of polycrystalline perovskite thin films were successfully passivated, and excess/unreacted PbI2 was converted into beneficial complex species, promoting efficient hole transfer at the interface. Experimental results showed that this treatment significantly improved the power conversion efficiency and stability of unencapsulated perovskite solar cells.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Integrated Quasi-2D Perovskite/Organic Solar Cells with Efficiency over 19% Promoted by Interface Passivation

Ting Wang et al.

Summary: Integrated perovskite/organic solar cells (IPOSCs) have shown great potential in expanding light absorption range and improving photovoltaic performance. By using an ultrathin conjugated polymer (PM6) layer to passivate surface defects of perovskite film, tuning the energy level and suppressing nonradiative recombination loss, an efficient interface passivation strategy for RP perovskite in IPOSCs has been successfully demonstrated, boosting open-circuit voltage from 1.06 to 1.12 V and efficiency from 17.23% to 19.15%.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Universal Bottom Contact Modification with Diverse 2D Spacers for High-Performance Inverted Perovskite Solar Cells

Jun Li et al.

Summary: This study investigates the effect of different 2D spacers on the bottom interface of inverted p-i-n PVSCs, revealing a significant improvement in efficiency and stability after optimization, attributed to the formation of 2D/3D heterojunction and related mechanisms. Additionally, the unencapsulated devices demonstrate excellent stability with 90% retention of initial efficiency after storage under ambient conditions.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dual Role of Cu-Chalcogenide as Hole-Transporting Layer and Interface Passivator for p-i-n Architecture Perovskite Solar Cell

Anupam Sadhu et al.

Summary: The study focuses on using a wet-deposited bifunctional Al-doped CuS film as an inorganic hole-transport layer in p-i-n architecture PSC to improve crystallization and interface quality, leading to a close to 95% retention of initial efficiency after 2 weeks of storage in a controlled environment.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

Promoting the hole extraction and interfacial performance with MOFs derived Co3O4@NC for efficient carbon-based perovskite solar cells

Cong Geng et al.

Summary: The introduction of inorganic hole buffer layer Co3O4@NC and a simple processing method can improve the interfacial performance and enhance the photovoltaic performance of carbon-based perovskite solar cells.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Environmental

Effective lewis base additive with S-donor for efficient and stable CsPbI2Br based perovskite solar cells

Luting Yu et al.

Summary: The study reveals that the inorganic CsPbI2Br perovskite solar cells with thioacetamide additive exhibit the best performance and good ambient stability, demonstrating the important role of Lewis acid-base additives in improving the performance of the cells.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Environmental

Tetrazole modulated perovskite films for efficient solar cells with improved moisture stability

Lisha Xie et al.

Summary: This research utilized 5-(ethylthio)-1H-tetrazole (ETT) to improve the quality of perovskite films, resulting in increased power conversion efficiency and enhanced moisture stability in metal hybrid perovskite solar cells (PSCs).

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Improving Thermal Stability of Perovskite Solar Cells by Suppressing Ion Migration Using Copolymer Grain Encapsulation

Yuchen Zhou et al.

Summary: The addition of a polystyrene-co-polyacrylonitrile (SAN) copolymer can significantly enhance the thermal stability of organic-inorganic hybrid perovskites (OIHPs) and improve the stability of perovskite solar cells (PSCs) by suppressing the migration of organic cations. The study shows that incorporating SAN within the perovskite layer leads to superior thermal stability compared to pure perovskite, with only a small decrease in power conversion efficiency even after continuous thermal aging. This research suggests a promising potential of using polymer grain encapsulation for enhancing thermal stability of OIHPs and their solar cell performance by suppressing the out-diffusion of cationic organic components.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interfacial Defects Change the Correlation between Photoluminescence, Ideality Factor, and Open-Circuit Voltage in Perovskite Solar Cells

Sohyeon Kim et al.

Summary: The study investigates the correlation of n(id), PL characteristics, and V-oc in triple-cation mixed-halide perovskite depending on interfacial crystal quality. It highlights the importance of evaluating interfacial crystal quality for understanding charge recombination and device optimization.

SMALL (2021)

添加到收藏夹

Article Chemistry, Physical

Multifunctional passivation strategy based on tetraoctylammonium bromide for efficient inverted perovskite solar cells

Jian Xiong et al.

Summary: In this study, tetraoctylammonium bromide (TOAB) was introduced through post-treatment to improve the efficiency and stability of inverted perovskite solar cells. The TOAB molecules successfully enhanced the built-in electrical field, hydrophobic properties, and light-harvesting efficiency of the devices. As a result, the champion power conversion efficiency (PCE) reached 21.47% and the device stability was greatly improved, demonstrating the potential of TOAB as a novel passivation strategy for PSCs.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of Side-Group-Regulated Dipolar Passivating Molecules on CsPbBr3 Perovskite Solar Cells

Jialong Duan et al.

Summary: This study demonstrates the importance of regulating the side group of a dipole molecule for interfacial passivation and surface energy level reconstruction of CsPbBr3 perovskite films to achieve efficient hole extraction and improve power conversion efficiency.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Energy & Fuels

Reducing the Energy Loss to Achieve High Open-circuit Voltage and Efficiency by Coordinating Energy-Level Matching in Sn-Pb Binary Perovskite Solar Cells

Xiaoyi Hou et al.

Summary: The study demonstrates a method for reducing energy loss in Sn-Pb binary perovskite solar cells (PSCs) using nickel oxide (NiOx) as the hole transport material (HTM). By optimizing the NiOx/PFN bilayer structure, the V-oc can be significantly enhanced to 0.88 V with an efficiency of 19.80%, surpassing previous results reported for NiOx-based Sn-Pb PSCs. The robust NiOx/PFN substrate and high-quality perovskite film grown on it make the device less vulnerable to ambient exposure, highlighting the importance of ideal hole conductors and interface engineering in efficient and stable Sn-Pb low-bandgap PSCs.

SOLAR RRL (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient organic solar cells with superior stability based on PM6:BTP-eC9 blend and AZO/Al cathode

Zhipeng Yin et al.

Summary: This study presents efficient organic solar cells with promising stability achieved through optimizing the AZO/Al cathode system, delivering the best efficiency of 15.76% and demonstrating shelf-stability, thermal stability, and operational stability. The strong correlation between cathode and stability is systematically studied, providing insights for improving stability in organic solar cells.

ISCIENCE (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

A Donor Polymer with a Good Compromise between Efficiency and Sustainability for Organic Solar Cells

Marta Penconi et al.

Summary: The novel donor copolymer PBDT3T shows promising performance in solar cells, with relatively low synthetic complexity and E factor compared to benchmark donor polymers. Its potential scalability, sustainability, and cost-effectiveness make it a candidate for industrial applications.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2021)

添加到收藏夹

Article Engineering, Environmental

Highly stable air processed perovskite solar cells by interfacial layer engineering

Ibrahima Ka et al.

Summary: In this study, PbS quantum dots were used on perovskite solar cells to improve stability. The best devices showed improved long-term stability, maintaining over 84% of the initial performance after 30 days of storage in ambient air. In addition to increased efficiency, the devices with PbS quantum dots also exhibited a reduction in hysteresis behavior.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Balancing crystallization rate in a mixed Sn-Pb perovskite film for efficient and stable perovskite solar cells of more than 20% efficiency

Zhanfei Zhang et al.

Summary: A new strategy is reported to grow highly crystallized Sn-Pb perovskite for perovskite solar cells, utilizing an ionic salt layer to facilitate quick crystallization of Pb-containing perovskite components and improve device stability. This approach led to a champion power conversion efficiency of 20.11% and enhanced thermal and shelf storage stability for mixed Sn-Pb PSCs.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fluoroarene derivative based passivation of perovskite solar cells exhibiting excellent ambient and thermo-stability achieving efficiency >20%

Maimur Hossain et al.

Summary: Fluoroaromatic amine additives were used to passivate hybrid perovskite solar cells, significantly enhancing their stability and efficiency. Among these additives, PFA showed the most remarkable improvement in both moisture and thermo-stability of the devices.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain size control for high-performance formamidinium-based perovskite solar cells via suppressing heterogenous nucleation

Xiaoxiao Xu et al.

Summary: Research focused on modulating the nucleation rate by introducing modifiers into precursor solutions to obtain high-quality perovskite films with large grain size and low-defect density, resulting in improved performance of FAPbI(3)-based PSCs. The modified PSCs achieved a high power-conversion efficiency of 20.15% and maintained about 92% of the initial efficiency in an air atmosphere.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Review Chemistry, Physical

A Review on Additives for Halide Perovskite Solar Cells

Shuang Liu et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Bifacial Passivation with Crosslinked Thioctic Acid for High-Performance Methylammonium Lead Iodide Perovskite Solar Cells

Hui Chen et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

Improving the efficiency and stability of inverted perovskite solar cells by CuSCN-doped PEDOT:PSS

Ligang Xu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

添加到收藏夹

Article Chemistry, Physical

Highly Efficient Perovskite Solar Cells Enabled by Multiple Ligand Passivation

Zhifang Wu et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Toward Understanding Space-Charge Limited Current Measurements on Metal Halide Perovskites

Elisabeth A. Duijnstee et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Engineering, Environmental

Dopant-free hole transport materials processed with green solvent for efficient perovskite solar cells

Huiqiang Lu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell

Yong Li et al.

ADVANCED SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Dopamine Semiquinone Radical Doped PEDOT:PSS: Enhanced Conductivity, Work Function and Performance in Organic Solar Cells

Miao Zeng et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

The surface of halide perovskites from nano to bulk

Jingjing Xue et al.

NATURE REVIEWS MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Improved Stability of Inverted and Flexible Perovskite Solar Cells with Carbon Electrode

Vivek Babu et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Interface Modification of a Perovskite/Hole Transport Layer with Tetraphenyldibenzoperiflanthene for Highly Efficient and Stable Solar Cells

Shiqi Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

Recent Progress of Inverted Perovskite Solar Cells with a Modified PEDOT:PSS Hole Transport Layer

Wenbin Han et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Sulfur-Donor Solvents Strongly Coordinate Pb2+ in Hybrid Organic- Inorganic Perovskite Precursor Solutions

J. Clay Hamill et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

添加到收藏夹

Article Chemistry, Physical

Critical Assessment of the Use of Excess Lead Iodide in Lead Halide Perovskite Solar Cells

Bart Roose et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Space-charge-limited electron and hole currents in hybrid organic-inorganic perovskites

Mohammad Sajedi Alvar et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells

Haizhou Lu et al.

SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Current Density Mismatch in Perovskite Solar Cells

Michael Saliba et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Green Synthesis of Eco-Friendly Graphene Quantum Dots for Highly Efficient Perovskite Solar Cells

Duha S. Ahmed et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Conjugated polyelectrolytes as promising hole transport materials for inverted perovskite solar cells: effect of ionic groups

Pang-Hsiao Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Efficiency progress of inverted perovskite solar cells

Xuesong Lin et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Two compatible polymer donors contribute synergistically for ternary organic solar cells with 17.53% efficiency

Qiaoshi An et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Rapid hybrid chemical vapor deposition for efficient and hysteresis-free perovskite solar modules with an operation lifetime exceeding 800 hours

Longbin Qiu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nicotinamide as Additive for Microcrystalline and Defect Passivated Perovskite Solar Cells with 21.7% Efficiency

Zhu Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Suppression of surface defects to achieve hysteresis-free inverted perovskite solar cells via quantum dot passivation

Chintam Hanmandlu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Electronic Structure of Nonionic Surfactant-Modified PEDOT:PSS and Its Application in Perovskite Solar Cells with Reduced Interface Recombination

Dongguen Shin et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

High Open-Circuit Voltage of 1.134 V for Inverted Planar Perovskite Solar Cells with Sodium Citrate-Doped PEDOT:PSS as a Hole Transport Layer

Wei Hu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Progress in Organic Electron Transport Materials in Inverted Perovskite Solar Cells

Ahmed Ali Said et al.

SMALL (2019)

添加到收藏夹

Article Chemistry, Physical

Enhancing the Open-Circuit Voltage of Perovskite Solar Cells by up to 120 mV Using π-Extended Phosphoniumfluorene Electrolytes as Hole Blocking Layers

Qingzhi An et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Cesium-lead based inorganic perovskite quantum-dots as interfacial layer for highly stable perovskite solar cells with exceeding 21% efficiency

Seckin Akin et al.

NANO ENERGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Boosting Efficiency and Stability of Organic Solar Cells Using Ultralow-Cost BiOCI Nanoplates as Hole Transporting Layers

Bin Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancing the Performance of Inverted Perovskite Solar Cells via Grain Boundary Passivation with Carbon Quantum Dots

Yuhui Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning Hole Transport Layer Using Urea for High-Performance Perovskite Solar Cells

Hytham Elbohy et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interfacial Modification in Organic and Perovskite Solar Cells

Shiqing Bi et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low-Temperature In Situ Amino Functionalization of TiO2 Nanoparticles Sharpens Electron Management Achieving over 21% Efficient Planar Perovskite Solar Cells

Wanpei Hu et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

High Operation Stability of Ultraflexible Organic Solar Cells with Ultraviolet-Filtering Substrates

Hiroki Kimura et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Highly efficient and stable perovskite solar cells via bilateral passivation layers

Tun Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Inverted planar perovskite solar cells based on CsI-doped PEDOT:PSS with efficiency beyond 20% and small energy loss

Kui Jiang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A zwitterionic polymer as an interfacial layer for efficient and stable perovskite solar cells

Suyuan Zhou et al.

RSC ADVANCES (2019)

添加到收藏夹

Article Chemistry, Physical

A Mechanically Robust Conducting Polymer Network Electrode for Efficient Flexible Perovskite Solar Cells

Xiaotian Hu et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Physical

Solution-Processed MoOx Hole-Transport Layer with F4-TCNQ Modification for Efficient and Stable Inverted Perovskite Solar Cells

Lijun Chen et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

16.55% efficiency ternary organic solar cells enabled by incorporating a small molecular donor

Tingting Yan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Optical-Electrical-Chemical Engineering of PEDOT:PSS by Incorporation of Hydrophobic Nafion for Efficient and Stable Perovskite Solar Cells

Shuang Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Elucidating the Origins of Subgap Tail States and Open-Circuit Voltage in Methylammonium Lead Triiodide Perovskite Solar Cells

Tian Du et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient and Stable Perovskite Solar Cells via Dual Functionalization of Dopamine Semiquinone Radical with Improved Trap Passivation Capabilities

Qifan Xue et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient, Hysteresis-Free, and Stable Perovskite Solar Cells with ZnO as Electron-Transport Layer: Effect of Surface Passivation

Jing Cao et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Graphdiyne-modified cross-linkable fullerene as an efficient electron-transporting layer in organometal halide perovskite solar cells

Meng Li et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient and Stable Nonfullerene-Graded Heterojunction Inverted Perovskite Solar Cells with Inorganic Ga2O3 Tunneling Protective Nanolayer

Junjie Ma et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Integrating Ultrathin Bulk-Heterojunction Organic Semiconductor Intermediary for High-Performance Low-Bandgap Perovskite Solar Cells with Low Energy Loss

Guiying Xu et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Review Multidisciplinary Sciences

Challenges for commercializing perovskite solar cells

Yaoguang Rong et al.

SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Sequentially Fluorinated PTAA Polymers for Enhancing V-OC of High-Performance Perovskite Solar Cells

Youngwoong Kim et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Energy & Fuels

Zn0.8Cd0.2S@PCBM Hybrid as an Efficient Electron Transport Layer for Air-Processed p-i-n Planar Perovskite Solar Cells: Improvement of Interfacial Electron Transfer and Device Stability

Yaru Li et al.

SOLAR RRL (2018)

添加到收藏夹

Article Chemistry, Physical

On the Impact of Contact Selectivity and Charge Transport on the Open-Circuit Voltage of Organic Solar Cells

Annika Spies et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Dual Interfacial Modifications Enable High Performance Semitransparent Perovskite Solar Cells with Large Open Circuit Voltage and Fill Factor

Qifan Xue et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of fullerene electron transport layer on the morphology and optoelectronic properties of perovskite solar cells

Mushfika Baishakhi Upama et al.

ORGANIC ELECTRONICS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Efficient and Air-Stable Planar Perovskite Solar Cells Formed on Graphene-Oxide-Modified PEDOT: PSS Hole Transport Layer

Hui Luo et al.

NANO-MICRO LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Improved performance of inverted planar perovskite solar cells with F4-TCNQ doped PEDOT:PSS hole transport layers

Dongyang Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Chemistry, Physical

Simultaneously enhancing dissociation and suppressing recombination in perovskite solar cells

Pei-Ying Lin et al.

NANO ENERGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Efficient and Air-Stable Planar Perovskite Solar Cells Formed on Graphene-Oxide-Modified PEDOT: PSS Hole Transport Layer

Hui Luo et al.

NANO-MICRO LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

In Situ Identification of Photo- and Moisture-Dependent Phase Evolution of Perovskite Solar Cells

Bo-An Chen et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

The Potential of Multijunction Perovskite Solar Cells

Maximilian T. Horantner et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Removing Leakage and Surface Recombination in Planar Perovskite Solar Cells

Kristofer Tvingstedt et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Energy & Fuels

Low-bandgap mixed tin-lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells

Dewei Zhao et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Inverted Planar Perovskite Solar Cells with a High Fill Factor and Negligible Hysteresis by the Dual Effect of NaCl-Doped PEDOT:PSS

Lijun Hu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Plasmonic Effects of Metallic Nanoparticles on Enhancing Performance of Perovskite Solar Cells

Qi Luo et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Photovoltaic Performance of Perovskite Solar Cells with Different Grain Sizes

Hyung Do Kim et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers

Jingbi You et al.

NATURE NANOTECHNOLOGY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nonreduction-Active Hole-Transporting Layers Enhancing Open-Circuit Voltage and Efficiency of Planar Perovskite Solar Cells

Tiefeng Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Physics, Applied

Mechanisms for light induced degradation in MAPbI3 perovskite thin films and solar cells

Ghada Abdelmageed et al.

APPLIED PHYSICS LETTERS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Universal energy level tailoring of self-organized hole extraction layers in organic solar cells and organic-inorganic hybrid perovskite solar cells

Kyung-Geun Lim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

Effect of Thermal and Structural Disorder on the Electronic Structure of Hybrid Perovskite Semiconductor CH3NH3PbI3

Shivam Singh et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fabrication of Efficient Low-Bandgap Perovskite Solar Cells by Combining Formamidinium Tin Iodide with Methylammonium Lead Iodide

Weiqiang Liao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Unreacted PbI2 as a Double-Edged Sword for Enhancing the Performance of Perovskite Solar Cells

T. Jesper Jacobsson et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

The Morphological Power of Soap: How Surfactants Lower the Sheet Resistance of PEDOT:PSS by Strong Impact on Inner Film Structure and Molecular Interface Orientation

Claudia M. Palumbiny et al.

ADVANCED ELECTRONIC MATERIALS (2016)

添加到收藏夹

Article Energy & Fuels

Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%

Dongqin Bi et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Imaging the Phase Separation Between PEDOT and Polyelectrolytes During Processing of Highly Conductive PEDOT:PSS Films

Liangqi Ouyang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

HPbI3: A New Precursor Compound for Highly Efficient Solution-Processed Perovskite Solar Cells

Feng Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Advances in Bulk Heterojunction Polymer Solar Cells

Luyao Lu et al.

CHEMICAL REVIEWS (2015)

添加到收藏夹

Article Engineering, Environmental

Three novel triazine-based materials with different O/S/N set of donor atoms: One-step preparation and comparison of their capability in selective separation of uranium

Chiyao Bai et al.

JOURNAL OF HAZARDOUS MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

Infrared Spectroscopic Study of Vibrational Modes in Methylammonium Lead Halide Perovskites

Tobias Glaser et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer

Linfeng Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Optics

Efficient inverted polymer solar cells employing favourable molecular orientation

Varun Vohra et al.

NATURE PHOTONICS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals

Qingfeng Dong et al.

SCIENCE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Impact of microstructure on local carrier lifetime in perovskite solar cells

Dane W. deQuilettes et al.

SCIENCE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

添加到收藏夹

Article Chemistry, Physical

High-Performance Semitransparent Perovskite Solar Cells with 10% Power Conversion Efficiency and 25% Average Visible Transmittance Based on Transparent CuSCN as the Hole-Transporting Material

Jae Woong Jung et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

Efficient CH3NH3PbI3 Perovskite Solar Cells Based on Graphdiyne (GD)-Modified P3HT Hole-Transporting Material

Junyan Xiao et al.

Advanced Energy Materials (2015)

添加到收藏夹

Article Chemistry, Physical

CH3NH3Cl-Assisted One-Step Solution Growth of CH3NH3Pbl3: Structure, Charge-Carrier Dynamics, and Photovoltaic Properties of Perovskite Solar Cells

Yixin Zhao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Femtosecond Time-Resolved Transient Absorption Spectroscopy of CH3NH3PbI3 Perovskite Films: Evidence for Passivation Effect of PbI2

Lili Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controllable Self-Induced Passivation of Hybrid Lead Iodide Perovskites toward High Performance Solar Cells

Qi Chen et al.

NANO LETTERS (2014)

添加到收藏夹

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

添加到收藏夹

Article Chemistry, Physical

Efficient hole-conductor-free, fully printable mesoscopic perovskite solar cells with a broad light harvester NH2CH=NH2Pbl3

Min Hu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

The temperature-dependent microstructure of PEDOT/PSS films: insights from morphological, mechanical and electrical analyses

Jian Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY C (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Chemical Management for Colorful, Efficient, and Stable Inorganic-Organic Hybrid Nanostructured Solar Cells

Jun Hong Noh et al.

NANO LETTERS (2013)

添加到收藏夹

Article Chemistry, Physical

Fill factor in organic solar cells

Boyuan Qi et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

添加到收藏夹

Review Chemistry, Multidisciplinary

Stability of Polymer Solar Cells

Mikkel Jorgensen et al.

ADVANCED MATERIALS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Semi-transparent polymer solar cells with 6% PCE, 25% average visible transmittance and a color rendering index close to 100 for power generating window applications

Kung-Shih Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

添加到收藏夹

Article Chemistry, Physical

Solution-processed small-molecule solar cells with 6.7% efficiency

Yanming Sun et al.

NATURE MATERIALS (2012)

添加到收藏夹

Article Chemistry, Organic

Synthesis of electroactive hydrazones derived from 3-(10-alkyl-10H-phenothiazin-3-yl)-2-propenals and their corresponding 3,3′-bispropenals

Aurimas Bieliauskas et al.

TETRAHEDRON (2012)

添加到收藏夹

Article Energy & Fuels

An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules

Suren A. Gevorgyan et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

Article Physics, Applied

High-efficiency hole extraction/electron-blocking layer to replace poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) in bulk-heterojunction polymer solar cells

Alexander W. Hains et al.

APPLIED PHYSICS LETTERS (2008)

添加到收藏夹

Review Energy & Fuels

Stability/degradation of polymer solar cells

Mikkel Jorgensen et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)

添加到收藏夹

Article Physics, Applied

Effect of self-organization in polymer/fullerene bulk heterojunctions on solar cell performance

Vishal Shrotriya et al.

APPLIED PHYSICS LETTERS (2006)

添加到收藏夹

Article Physics, Applied

Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells -: art. no. 123509

LJA Koster et al.

APPLIED PHYSICS LETTERS (2005)

添加到收藏夹

Article Physics, Multidisciplinary

Photocurrent generation in polymer-fullerene bulk heterojunctions

VD Mihailetchi et al.

PHYSICAL REVIEW LETTERS (2004)

添加到收藏夹

Review Materials Science, Multidisciplinary

Charge transport in poly(p-phenylene vinylene) light-emitting diodes

PWM Blom et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.