☆ 4.7 Article

Mathematical simulation of the rheological behavior of MWCNT (20%)-ZnO (80%)/single-grade SAE50 hybrid nanofluid to introduce the most optimal correlation function and determining the optimal lubrication conditions in hot and cold environments

TRIBOLOGY INTERNATIONAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Competition of ANN and RSM techniques in predicting the behavior of the CuO-liquid paraffin

Yacine Khetib et al.

Summary: In this article, the estimation of CuO-liquid paraffin nanofluid viscosity was assessed using response surface method (RSM) and artificial neural network (ANN) methods. The results showed that the ANN method is more accurate than the RSM method.

CHEMICAL ENGINEERING COMMUNICATIONS (2023)

添加到收藏夹

Article Thermodynamics

Thermal management of electronic components based on new wave bio-inspired structures and nanofluids

Zhibo Tang et al.

Summary: In recent years, the miniaturization of electronic components has led to an increased interest in nanofluids and bionics for heat exchanger heat dissipation. This study investigates the cooling effect and comprehensive performance of Fe3O4-water nanofluids in a bio-inspired cooling system for electronic components. The experiment analyzes the effects of nanofluid concentrations, angles and depths of wave bio-inspired structures, and Reynolds numbers on the cooling performance. The findings suggest that a larger depth of the bio-inspired structure enhances heat dissipation, and a concentration of 0.3% yields the best cooling effect. A performance assessment chart based on exergy efficiency confirms the good cooling performance of the system.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Engineering, Chemical

Numerical analysis of flow and heat characteristic around micro-ribbed tube in heat exchanger system

Jianglin Tu et al.

Summary: This study analyzed the effects of different parameters on the flow and heat transfer characteristics of tube-row channel heat exchangers through numerical simulation. It was found that TiO2-H2O nanofluids can improve the performance of heat exchangers, with the best results achieved at a mass fraction of 0.4%. Adjusting the number of ribs, rib height, pitch diameter ratio, and using nanofluids can significantly increase the Nusselt numbers.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Thermodynamics

Study on the mechanism of modified surface and magnetic nanofluids on cooling performance of wireless charging equipment under magnetic field

Yuxing Wang et al.

Summary: This study investigates a cooling system coupling superhydrophobic surface with magnetic nanofluids. The findings demonstrate that magnetic fluids can reduce thermal resistance and improve heat transfer efficiency. Additionally, a new flow model on the superhydrophobic surface is proposed.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Comparative rheological study on hybrid nanofluids with the same structure of MWCNT (50%)-ZnO(50%)/SAE XWX to select the best performance of nano-lubricants using response surface modeling

Mohammad Hemmat Esfe et al.

Summary: In this study, the rheological behavior of hybrid nano-lubricants containing ZnO and MWCNT nanoparticles was comprehensively investigated. The nano-lubricants showed non-Newtonian behavior in all conditions. Adding nanoparticles to the base oil resulted in significant changes in viscosity. A mathematical model was proposed to predict the viscosity behavior accurately.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Chemistry, Physical

Application of experimental and statistical methods in the study of rheology of MWCNT (25%)-TiO2 (75%)/SAE40 HNF to identify and use in the lubrication industry

Mohammad Hemmat Esfe et al.

Summary: The viscosity behavior of MWCNT-TiO2/SAE40 combined nanofluid was studied using experimental and statistical methods. The results showed that the viscosity of the nanofluid was influenced by the solid volume fraction, temperature, and shear rate. The response surface methodology was used to predict the experimental results and establish a mathematical relationship.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Engineering, Chemical

Experimental study on the particle fouling properties of magnetic nanofluids in a corrugated tube with built-in twisted turbulator under variable magnetic field

Jianglin Tu et al.

Summary: This study experimentally investigated the potential application of magnetic nanofluids and twisted turbulators in heat exchangers. The results showed that the application of twisted turbulators and magnetic fields can effectively improve particle fouling resistance.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Grindability of titanium alloy using cryogenic nanolubricant minimum quantity lubrication

Xin Cui et al.

Summary: This research establishes calculation formulas to evaluate the grindability of Ti6Al-4V titanium alloy, and finds that cryogenic nanolubricant minimum quantity lubrication (CNMQL) exhibits the best performance in the grinding process. CNMQL significantly reduces grinding force, peak temperature, and surface roughness, while improving the ability to resist surface defects.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Thermal performance of modified melamine foam/graphene/paraffin wax composite phase change materials for solar-thermal energy conversion and storage

Wei Cui et al.

Summary: This study addresses the issues of leakage, poor thermal conductivity, and poor light absorption in phase change materials (PCMs) by combining modified melamine foam (MF) and graphene nanoparticles (GNP). The composite PCMs fabricated with modified MF, paraffin wax (PW), and GNP exhibit good leakproof ability, high thermal conductivity, and excellent solar-thermal energy conversion capability. Furthermore, a thermoelectric conversion system driven by solar energy was developed to demonstrate the potential of these composite PCMs for cleaner energy production.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Engineering, Mechanical

Tribology of enhanced turning using biolubricants: A comparative assessment

Xiaoming Wang et al.

Summary: The tribological behavior of cutting is crucial in determining the production cycle, cost, and quality of parts. Minimum quantity lubrication (MQL) based on environmentally friendly biolubricants can modify the contact conditions in cutting zones, but it cannot meet the requirements for machining difficult-to-machine materials. This study comprehensively analyzed the lubrication mechanism and technical performance of enhanced MQL in turning, and conducted a comparative assessment of cutting force, cutting temperature, tool wear, and surface quality under enhanced environmentally friendly lubrication turning. The study provides insights into the mechanism, tribological behavior, and development trend of lubrication in relation to continuous cutting.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Review Engineering, Manufacturing

Electrostatic atomization minimum quantity lubrication machining: from mechanism to application

Wenhao Xu et al.

Summary: This study provides a comprehensive review and critical assessment of electrostatic atomization MQL, including its critical equipment, lubrication and heat transfer mechanisms, and comparison with pneumatic atomization MQL. Previous experiments have shown that electrostatic atomization MQL improves machining performance. Future development directions are proposed.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2022)

添加到收藏夹

Article Thermodynamics

Measurement of thermal conductivity and viscosity of ZnO-SiO2 hybrid nanofluids

Gokberk Yalcin et al.

Summary: This study investigates the thermal properties of water-based ZnO-SiO2 hybrid nanofluids and confirms their potential applications in various thermal systems by experimentally determining thermal conductivity and dynamic viscosity values. The results show that ZnO-SiO2 hybrid nanofluids can enhance system heat transfer rate and efficiency, reduce pressure drop, and power consumption, indicating promising prospects for their use in different thermal applications.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

添加到收藏夹

Article Thermodynamics

Feasibility of least-square support vector machine in predicting the effects of shear rate on the rheological properties and pumping power of MWCNT-MgO/oil hybrid nanofluid based on experimental data

Amin Asadi et al.

Summary: This study experimentally investigated the effects of solid concentration and temperature on the dynamic viscosity of a hybrid oil-based nanolubricant and proposed a new correlation for prediction. The LSSVM was then used to predict the dynamic viscosity behavior with excellent capability. Additionally, the study also examined the impact of adding hybrid nanoparticles on pumping power.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Energy & Fuels

Statistical modelling for the Ultrasonic photodegradation of Rhodamine B dye using aqueous based Bi-metal doped TiO2 supported montmorillonite hybrid nanofluid via RSM

Manjakuppam Malika et al.

Sustainable Energy Technologies and Assessments (2021)

添加到收藏夹

Article Chemistry, Physical

Examining rheological behavior of MWCNT-TiO2/5W40 hybrid nanofluid based on experiments and RSM/ANN modeling

Yu-Ming Chu et al.

Summary: The study experimentally examined the rheological behavior of MWCNT-TiO2/5W40 hybrid nanofluid, revealing that the presence of nanoparticles intensified the fluid viscosity by up to 790%. The neural network forecasting model also demonstrated acceptable results with a maximum error below 5% and R-2 = 0.999.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Energy & Fuels

Synthesis of Fe3O4-Al2O3-ZnO/water ternary hybrid nanofluid: Investigating the effects of temperature, volume concentration and mixture ratio on Specific heat capacity, and development of Hybrid machine learning for prediction

Humphrey Adun et al.

Summary: In this experimental study, the specific heat capacity of water-based Fe3O4-Al2O3-ZnO nanofluids was investigated. Results showed a linear effect of temperature on specific heat capacity, with an increase in volume concentration leading to a decrease in specific heat capacity. The support vector regression model provided the most accurate prediction of experimental data, with a maximum deviation of 0.2% compared to the experimental results.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

On the rheological properties of multi-walled carbon nano-polyvinylpyrrolidone/silicon-based shear thickening fluid

Li Sun et al.

Summary: This study investigates the rheological properties of shear thickening fluid (STF) enhanced by different additives at varying mass fraction ratios. It was found that the MWCNTs-PVP/SiO2-STF system shows significant shear thickening effect when the PVP mass fraction is increased to 0.15%, with the best performance observed at 0.1% PVP and 1mm plate spacing.

NANOTECHNOLOGY REVIEWS (2021)

添加到收藏夹

Article Thermodynamics

Shape effect of Al2O3 nanoparticles on the thermophysical properties and viscosity of molten salt nanofluids for TES application at CSP plants

Udayashankar Nithiyanantham et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Physics, Multidisciplinary

Potential application of Response Surface Methodology (RSM) for the prediction and optimization of thermal conductivity of aqueous CuO (II) nanofluid: A statistical approach and experimental validation

Yeping Peng et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The rheological behavior of MWCNTs-ZnO/Water-Ethylene glycol hybrid non-Newtonian nanofluid by using of an experimental investigation

Shu-Rong Yan et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Engineering, Civil

An integrated simulation-optimization framework to optimize the reservoir operation adapted to climate change scenarios

Vahid Nourani et al.

JOURNAL OF HYDROLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

Efficacy of hybrid nano-powder presence on the thermal conductivity of the engine oil: An experimental study

Xiao-Xiao Tian et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Nuclear Science & Technology

On the use of boundary conditions and thermophysical properties of nanoparticles for application of nanofluids as coolant in nuclear power plants; a numerical study

Hamidreza Arab Bafrani et al.

PROGRESS IN NUCLEAR ENERGY (2020)

添加到收藏夹

Article Engineering, Chemical

Heat transport in nanofluid coolant car radiator with louvered fins

Ashutosh Kumar et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Physics, Multidisciplinary

Experimental evaluation of MWCNT-Al2O3(40-60%)/5W50 hybrid nanofluid and comparison with MWCNT-Al2O3(35-65%)/5W50 hybrid nanofluid with focus on thermophysical properties and cost performance index

Mohammad Hemmat Esfe et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of TiO2-Al2O3 nanoparticle mixing ratio on the thermal conductivity, rheological properties, and dynamic viscosity of water-based hybrid nanofluid

V. Vicki Wanatasanapan et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Construction & Building Technology

An experimental investigation of CuO/water nanofluid heat transfer in geothermal heat exchanger

Ruiqing Du et al.

ENERGY AND BUILDINGS (2020)

添加到收藏夹

Article Physics, Multidisciplinary

Statistical investigation for developing a new model for rheological behavior of ZnO-Ag (50%-50%)/Water hybrid updates Newtonian nanofluid using experimental data

Behrooz Ruhani et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Statistical investigation for developing a new model for rheological behavior of Silica-ethylene glycol/Water hybrid Newtonian nanofluid using experimental data

Behrooz Ruhani et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

添加到收藏夹

Article Engineering, Chemical

Experimental study on stability and rheological behaviour of hybrid Al2O3-TiO2 Therminol-55 nanofluids for concentrating solar collectors

Ovais Gulzar et al.

POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Thermodynamics

Experimental studies on thermal and rheological properties of Al2O3-ethylene glycol nanofluid

T. S. Krishnakumar et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2018)

添加到收藏夹

Article Chemistry, Physical

Viscosity estimation of Al2O3, SiO2 nanofluids and their hybrid: An experimental study

Georgiana Madalina Moldoveanu et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

添加到收藏夹

Article Thermodynamics

Examination of rheological behavior of MWCNTs/ZnO-SAE40 hybrid nano-lubricants under various temperatures and solid volume fractions

Mohammad Hemmat Esfe et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

添加到收藏夹

Article Thermodynamics

Thermal conductivity and viscosity of Al2O3 nanofluids for different based ratio of water and ethylene glycol mixture

H. W. Chiam et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

添加到收藏夹

Article Engineering, Manufacturing

Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions

Min Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

添加到收藏夹

Article Thermodynamics

Application of three-level general factorial design approach for thermal conductivity of MgO/water nanofluids

Mohammad Hemmat Esfe et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Research on microscale skull grinding temperature field under different cooling conditions

Min Yang et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Effect of suspending hybrid nano-additives on rheological behavior of engine oil and pumping power

Ebrahim Dardan et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

An experimental investigation and new correlation of viscosity of ZnO-EG nanofluid at various temperatures and different solid volume fractions

Mohammad Hemmat Esfe et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)

添加到收藏夹

Article Thermodynamics

Heat transfer and friction factor of water based TiO2 and SiO2 nanofluids under turbulent flow in a tube

W. H. Azmi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Thermodynamics

Particle shape effect on the viscosity and thermal conductivity of ZnO nanofluids

Jisun Jeong et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2013)

添加到收藏夹

Article Thermodynamics

IDENTIFICATION OF THE KEY VARIABLES ON THERMAL CONDUCTIVITY OF CuO NANOFLUID BY A FRACTIONAL FACTORIAL DESIGN APPROACH

Amin Kazemi-Beydokhti et al.

NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS (2013)

添加到收藏夹

Review Thermodynamics

Latest developments on the viscosity of nanofluids

I. M. Mahbubul et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

Effect of prolonged ultrasonication on the thermal conductivity of ZnO-ethylene glycol nanofluids

Madhusree Kole et al.

THERMOCHIMICA ACTA (2012)

添加到收藏夹

Article Thermodynamics

Thermal conductivity enhancement of ZnO nanofluid using a one-step physical method

Gyoung-Ja Lee et al.

THERMOCHIMICA ACTA (2012)

添加到收藏夹

Article Thermodynamics

Investigation of thermal conductivity and viscosity of ethylene glycol based ZnO nanofluid

Wei Yu et al.

THERMOCHIMICA ACTA (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.