☆ 4.7 Article

Discrete element study on the mechanical behavior of flawed rocks under dynamic compression

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Geological

Effect of Confining Pressure and Strain Rate on Mechanical Behaviors and Failure Characteristics of Sandstone Containing a Pre-existing Flaw

Wei You et al.

Summary: In this study, dynamic triaxial tests were conducted on sandstone containing a pre-existing flaw under different radial confining pressures and strain rates. The results showed that both the dynamic strength and energy dissipation density of the sandstone increased with increasing radial confining pressure and strain rate. The study also characterized the fragment distributions of the sandstone and revealed the fracturing mechanism of new cracks through microscopic observation.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

添加到收藏夹

Article Engineering, Geological

Mechanical behaviours of sandstone containing intersecting fissures under uniaxial compression

Fei Xiong et al.

Summary: The effects of intersecting angle and distribution orientation of fissures on the mechanical properties and failure characteristics of sandstone containing intersecting fissures were investigated. The crack initiation forms and failure modes were categorized and determined, and the crack evolution processes were studied. Approaches for quickly determining the crack initiation form and failure mode were proposed, and the crack evolution was predicted with acceptable precision.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Geological

Failure characteristics of brittle rock containing two rectangular holes under uniaxial compression and coupled static-dynamic loads

Quanqi Zhu et al.

Summary: This study utilized impact tests, compression tests, and digital image correlation to investigate the failure characteristics and mechanisms of rock specimens under different pre-stress conditions. The results revealed that pre-stress has dual effects on the dynamic mechanical behavior of rocks, with changes in crack patterns and strain localization observed as pre-stress levels increase.

ACTA GEOTECHNICA (2022)

添加到收藏夹

Article Engineering, Mechanical

Evolution of tensile and shear cracking in crystalline rocks under compression

Sana Zafar et al.

Summary: This study conducted laboratory-scale experiments and data analysis on rock specimens to understand the evolution of tensile and shear cracking under different stress levels. By using acoustic emission and digital image correlation techniques, we were able to track the changes in the source mechanisms of the cracks and identify the correlation between the cracking mechanisms at different stages of the cracks.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental and DEM study on failure behavior and stress distribution of flawed sandstone specimens under uniaxial compression

Yan-Hua Huang et al.

Summary: Rock materials with pre-existing flaws have a significant impact on the stability of rock engineering. This study conducted uniaxial compression tests and numerical simulations on sandstone specimens with various inclination angles of pre-existing flaws. The results showed that the pre-existing flaws influenced the stress-strain curves, mechanical parameters, acoustic emission, and failure patterns of the specimens.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of confining pressure on deformation failure behavior of jointed rock

Chen Miao et al.

Summary: The study found that confining pressure and joint inclination affect the mechanical properties and failure behavior of rocks, with an increase in confining pressure leading to higher compressive strength and elastic modulus of samples, while an increase in joint inclination first decreases and then increases these two mechanical parameters. In addition, confining pressure and joint inclination also affect the crack patterns and contact force distributions of rocks.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2022)

添加到收藏夹

Article Engineering, Geological

Fracture mechanism and energy evolution of sandstone with a circular inclusion

Quanqi Zhu et al.

Summary: Understanding the stress distribution, deformation and fracture behavior around a circular hole or inclusion is critical for the stability assessment of rock structures. The results show that filling the hole or inclusion can increase the stress and displacement of the inclusion while decreasing the stress and displacement around the surrounding rock, thereby improving the strength and deformation properties. In addition, the crack types and initiation positions around the filled and unfilled holes are quite different.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental study on the dynamic behavior of sandstone with coplanar elliptical flaws from macro, meso, and micro viewpoints

Zhenyu Han et al.

Summary: The inclination angle of coplanar elliptical flaws has a significant impact on the dynamic behavior of sandstone specimens, with higher angles resulting in lower dynamic compressive strength and Young's modulus. Tensile cracks dominate in specimens with inclination angles larger than 45°.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Mining & Mineral Processing

Dynamic mechanical properties and wave propagation of composite rock-mortar specimens based on SHPB tests

Zhenyu Han et al.

Summary: Filled inclusions in rock discontinuities have a significant impact on the mechanical characteristics and stability of rock engineering. Experimental results show that the interlayer strength influences wave propagation and fracture processes. Increasing interlayer stiffness leads to higher transmission coefficient, strength, closure, and stiffness. The cement mortar layer acts as a buffer, while a weaker interlayer causes slabbing near the rock-mortar interface.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Geological

Effects of axial pre-force and loading rate on Mode I fracture behavior of granite

Zhenyu Han et al.

Summary: This study investigates the effects of axial pre-force and loading rate on the dynamic fracture behavior of rocks through coupled static-dynamic tests. The results show that both pre-force and loading rate have an impact on fracture parameters, with loading rate having a more significant effect. A new method based on the DIC technique is proposed to calculate crack opening distance (COD) and crack propagation velocity (CPV), improving efficiency and accuracy compared to traditional methods. The findings provide important insights into rock fracture dynamics and crack propagation.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2022)

添加到收藏夹

Article Engineering, Civil

A Micromechanical Model for Simulation of Rock Failure Under High Strain Rate Loading

Mohammad Reza Majedi et al.

Summary: The study investigates the dynamic behavior of rock using numerical Brazilian tensile tests and a micromechanical model, finding that a specific pattern of contact bond strength variation can better simulate the material behavior under dynamic loading.

INTERNATIONAL JOURNAL OF CIVIL ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Implementation of a J-integral based Maximum Circumferential Tensile Stress theory in DDA for simulating crack propagation

Cungen Wang et al.

Summary: The study applied a J-integral based Maximum Circumferential Tensile Stress theory to simulate crack propagation within the conventional Discontinuous Deformation Analysis (DDA) Method. By deriving a crack propagation theory suitable for DDA and embedding it into the algorithm, the method was validated through comparison with experimental results and successfully applied to simulate crack propagations in practical cases like landslides.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Review Engineering, Mechanical

Compression-induced crack initiation and growth in flawed rocks: A review

Xiao-Ping Zhou et al.

Summary: This review focuses on the development and contribution of experiments and numerical simulations in understanding the compression-induced failure characteristics of flawed rock specimens, particularly in terms of crack initiation and growth behaviors. It systematically reviews various aspects of the failure characteristics of flawed rock specimens, as well as new findings from recent experimental and numerical studies.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A field-enriched finite element method for brittle fracture in rocks subjected to mixed mode loading

Xiaoping Zhou et al.

Summary: A field-enriched finite element method is proposed in this paper to simulate crack propagation and coalescence in brittle rocks under mixed mode loading. The method is validated using various sample configurations and shown to accurately model fracture characteristics and parameters. This numerical approach shows good agreement with experimental and previous numerical results, indicating its ability to simulate crack propagation and coalescence in brittle rocks.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2021)

添加到收藏夹

Article Engineering, Geological

Experimental and numerical investigation on crack mechanism of folded flawed rock-like material under uniaxial compression

Wenchen Fan et al.

Summary: The study investigates the failure mechanism of rock masses with overlapped fissures by conducting uniaxial compressive tests and numerical studies on Portland cement samples containing folded flaws of different dip angles and undulation angles. Results show that the deformational curves of specimens containing folded flaws exhibit two patterns, and five different failure modes were observed. The folded flaw can still resist shear stress after crack coalescence, contributing to the residual peak strength in stress-displacement curves. The findings provide a better understanding of the failure mechanism of rock masses with folded fractures.

ENGINEERING GEOLOGY (2021)

添加到收藏夹

Article Engineering, Geological

Dynamic Cracking Behaviors and Energy Evolution of Multi-flawed Rocks Under Static Pre-compression

Zelin Yan et al.

Summary: This study systematically investigated the influences of pre-stress ratio, flaw inclination angle, and strain rate on the dynamic progressive cracking mechanism and energy evolution of multi-flawed rocks. The experimental results show that the dynamic/total strength generally increases with increasing strain rate, decreases with increasing flaw inclination angle, and exhibits complex changes with increasing pre-stress ratio.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Crack propagation process and acoustic emission characteristics of rock-like specimens with double parallel flaws under uniaxial compression

Zhiheng Wang et al.

Summary: This study investigated the initiation mechanism of microcracks in fractured rock mass from the perspective of micromechanics, establishing macro-micro criteria to determine and distinguish the properties and types of cracks. It was found that the stress state of rock particles determines the type and propagation direction of cracks, allowing for an effective analysis of the initiation mechanism of different types of cracks and their propagation trends.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Mechanical

An experimental study on failure mechanical behavior and cracking mechanism of rectangular solid sandstone containing two non-coplanar fissures under conventional triaxial compression

Sheng-Qi Yang et al.

Summary: The presence of pre-existing fissures significantly affects the strength, deformation parameters, and crack propagation in rock specimens, with a greater impact on damage threshold. Coalescence is easier when the ligament angle is parallel to the principal stress, and cracks tend to expand more readily in the width direction.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Combination of an adaptive remeshing technique with a coupled FEM-DEM approach for analysis of crack propagation problems

Alejandro Cornejo et al.

COMPUTATIONAL PARTICLE MECHANICS (2020)

添加到收藏夹

Article Engineering, Geological

Experimental study of stress wave propagation and energy characteristics across rock specimens containing cemented mortar joint with various thicknesses

Zhenyu Han et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Sensitivity of the damage response and fracture path to material heterogeneity present in a sandstone specimen containing a pre-existing 3-D surface flaw under uniaxial loading

S. Mondal et al.

COMPUTERS AND GEOTECHNICS (2020)

添加到收藏夹

Article Mechanics

Cracking process and acoustic emission characteristics of sandstone with two parallel filled-flaws under biaxial compression

Ruide Lei et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Geological

DEM investigation on the mechanical behaviors of flawed specimens subjected to coupled static-dynamic loads

Peng Feng et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

Experiment and peridynamic simulation on cracking behavior of red sandstone containing a single non-straight fissure under uniaxial compression

Sheng-Qi Yang et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

添加到收藏夹

Article Energy & Fuels

Conceptualization and preliminary study of engineering disturbed rock dynamics

Heping Xie et al.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2020)

添加到收藏夹

Article Engineering, Geological

Fracturing Behavior Study of Three-Flawed Specimens by Uniaxial Compression and 3D Digital Image Correlation: Sensitivity to Brittleness

Xiao-Ping Zhou et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

Simulating damage evolution and fracture propagation in sandstone containing a preexisting 3-D surface flaw under uniaxial compression

Sanjib Mondal et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2019)

添加到收藏夹

Article Geosciences, Multidisciplinary

Experimental investigation of progressive cracking processes in granite under uniaxial loading using digital imaging and AE techniques

Xiao-Ping Zhou et al.

JOURNAL OF STRUCTURAL GEOLOGY (2019)

添加到收藏夹

Review Mechanics

Comparative analysis of mechanisms of 3-D brittle crack growth in compression

Hongyu Wang et al.

ENGINEERING FRACTURE MECHANICS (2019)

添加到收藏夹

Article Engineering, Geological

Dynamic Mechanical Properties and Fracturing Behavior of Marble Specimens Containing Single and Double Flaws in SHPB Tests

Diyuan Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Fracture mechanism simulation of inhomogeneous anisotropic rocks by extended finite element method

Ehsan Mohtarami et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

添加到收藏夹

Article Mechanics

Dynamic fragmentation of rock material: Characteristic size, fragment distribution and pulverization law

X. F. Li et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quasi-static fracturing in double-flawed specimens under uniaxial loading: the role of strain rate

Jian-Zhi Zhang et al.

INTERNATIONAL JOURNAL OF FRACTURE (2018)

添加到收藏夹

Article Mechanics

A 3-D conjugated bond-pair-based peridynamic formulation for initiation and propagation of cracks in brittle solids

Yunteng Wang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

添加到收藏夹

Article Engineering, Geological

An Alternative Approach for Representing the Data Provided by the Acoustic Emission Technique

Dimos Triantis et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

添加到收藏夹

Article Engineering, Geological

Experimental Study on the Growth, Coalescence and Wrapping Behaviors of 3D Cross-Embedded Flaws Under Uniaxial Compression

Xiao-Ping Zhou et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

添加到收藏夹

Article Mechanics

A numerical estimate method of dynamic fracture initiation toughness of rock under high temperature

Tubing Yin et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Engineering, Geological

Dynamic Strength and Fracturing Behavior of Single-Flawed Prismatic Marble Specimens Under Impact Loading with a Split-Hopkinson Pressure Bar

Xibing Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2017)

添加到收藏夹

Article Mechanics

Numerical investigation on the dynamic progressive fracture mechanism of cracked chevron notched semi-circular bend specimens in split Hopkinson pressure bar tests

Hongbo Du et al.

ENGINEERING FRACTURE MECHANICS (2017)

添加到收藏夹

Article Engineering, Mechanical

The modeling of crack propagation and coalescence in rocks under uniaxial compression using the novel conjugated bond-based peridynamics

Wang Yunteng et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

添加到收藏夹

Article Engineering, Geological

Loading-rate-dependent progressive fracturing of cracked chevron-notched Brazilian disc specimens in split Hopkinson pressure bar tests

Feng Dai et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Uniaxial strength and failure in sandstone containing a pre-existing 3-D surface flaw

Yinlong Lu et al.

INTERNATIONAL JOURNAL OF FRACTURE (2015)

添加到收藏夹

Article Engineering, Environmental

Displacement field analysis for cracking processes in bonded-particle model

Xiao-Ping Zhang et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2014)

添加到收藏夹

Review Geosciences, Multidisciplinary

Microfractures: A review

Mark H. Anders et al.

JOURNAL OF STRUCTURAL GEOLOGY (2014)

添加到收藏夹

Article Engineering, Geological

Numerical Simulation of the Rock SHPB Test with a Special Shape Striker Based on the Discrete Element Method

Xibing Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2014)

添加到收藏夹

Article Engineering, Geological

An Experimental Study of Crack Coalescence Behaviour in Rock-Like Materials Containing Multiple Flaws Under Uniaxial Compression

X. P. Zhou et al.

ROCK MECHANICS AND ROCK ENGINEERING (2014)

添加到收藏夹

Review Engineering, Geological

Fracture initiation and propagation in intact rock - A review

E. Hoek et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2014)

添加到收藏夹

Article Engineering, Geological

The Brazilian Disc Test for Rock Mechanics Applications: Review and New Insights

Diyuan Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2013)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Frictional crack initiation and propagation analysis using the numerical manifold method

Zhijun Wu et al.

COMPUTERS AND GEOTECHNICS (2012)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A three-dimensional numerical investigation of the fracture of rock specimens containing a pre-existing surface flaw

Z. Z. Liang et al.

COMPUTERS AND GEOTECHNICS (2012)

添加到收藏夹

Article Engineering, Geological

Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials

Y. X. Zhou et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2012)

添加到收藏夹

Article Mechanics

Influence of flaw inclination angle and loading condition on crack initiation and propagation

Huanqiang Li et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

添加到收藏夹

Article Engineering, Geological

Influence of Sample Height-to-Width Ratios on Failure Mode for Rectangular Prism Samples of Hard Rock Loaded In Uniaxial Compression

Diyuan Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2011)

添加到收藏夹

Article Engineering, Mechanical

Strain-rate effects on the strength and fragmentation size of rocks

Chengzhi Qi et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2009)

添加到收藏夹

Article Mechanics

Influence of shape and locations of initial 3-D cracks on their growth in uniaxial compression

AV Dyskin et al.

ENGINEERING FRACTURE MECHANICS (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Pulse shaping techniques for testing brittle materials with a split Hopkinson pressure bar

DJ Frew et al.

EXPERIMENTAL MECHANICS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.