☆ 4.7 Article

A parametric study on the failure strength of multi-bolt composite repairs with different configurations

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Three-dimensional progressive damage and failure analysis of double-lap composite bolted joints under quasi-static tensile loading

Jianxia Wang et al.

Summary: A three-dimensional progressive damage model for composite bolted joints under tensile loading was developed and validated. The model considered significant damage phenomena and showed high accuracy in predicting inflection load, failure load, load-displacement response, and failure modes. The study revealed that matrix cracking is the dominant failure mode in these joints.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Composites

Load-bearing capacity and failure mechanism of integrated fluted-core composite sandwich cylinders

Haiyang Yang et al.

Summary: Fluted-core sandwich composites offer great potential in lightweight engineering applications. This study designed and fabricated trapezoidal fluted-core sandwich composite cylinders made of carbon fiber-reinforced plastics to improve deformation stability. The effects of circumferential cell number and wall thickness on bearing characteristics and failure mechanism were assessed. The results showed that increasing cell number and wall thickness could improve critical local buckling load and enhance specific buckling load.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Failure Analysis of Hat-Stringer-Stiffened Aircraft Composite Panels under Four-Point Bending Loading

Binkai Li et al.

Summary: This study conducted experimental and numerical research on the static and fatigue failure of hat-stringer-stiffened composite panels under four-point bending loading. A novel theoretical model was proposed and a numerical method was developed for accurate prediction. The results showed good agreement between predictions and experiments.

MATERIALS (2022)

添加到收藏夹

Article Mechanics

An R-curve effect-included delamination growth criterion for mixed-mode I/II delamination predictions of composite laminates

Yu Gong et al.

Summary: In this study, a novel delamination growth criterion considering the significant R-curve effects was proposed for mixed-mode I/II delamination predictions. Its adequacy and accuracy were validated by experimental data for two different composite materials. The proposed criterion is easy to use with only two experimentally obtained parameters.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Mechanics

Effects of debonding defects on the postbuckling and failure behaviors of composite stiffened panel under uniaxial compression

Ruixue Ji et al.

Summary: Research has shown that debonding defects can alter the post-buckling deformation modes and development paths of stiffened panels, leading to varying degrees of deflection and distortion in structures. This can change the failure behaviors and processes of composite laminates, further weakening the ultimate failure strength of the entire composite stiffened panels.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Prediction of net-tension failure of multi-bolt composite joints: A fast approach for laminates with arbitrary layup

Xiaona Peng et al.

Summary: A new fast approach based on finite fracture mechanics and finite element methods was developed to predict the net-tension failure strength of multi-bolt composite joints. The method efficiently calculates stress distribution and stress intensity factor, which can address different problems and validate the results through comparison with test data.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of environment conditioning on mode II fracture behaviour of adhesively bonded joints

S. Abdel-Monsef et al.

Summary: The experimental study found that environmental conditions and temperature have a significant impact on the fracture behavior of adhesively bonded joints, with long aging times leading to decreased fracture toughness, high temperatures increasing toughness, and low temperatures increasing the brittleness of the adhesive.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Mechanics

Failure prediction of irregular arranged multi-bolt composite repair based on finite fracture mechanics model

Xiang Li et al.

Summary: A numerical method based on the finite fracture mechanics model was proposed in this study for accurately predicting the failure of bolted composite repairs. Through a two-stage analysis strategy, the computational cost was reduced while maintaining high accuracy. Experimental validation demonstrated the effectiveness and applicability of the numerical method in predicting the failure behavior of bolted composite repairs.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Marine

Failure prediction of marine non-planar composite π joints based on combined 2D material model and progressive damage method

Yongxiang Zhang et al.

Summary: The study presents a 2D finite element model and material model for non-planar composite pi joints in marine engineering, accurately predicting their failure behavior. Experimental validation and successful prediction of damage behavior and ultimate failure load highlight the potential for engineering applications.

OCEAN ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Experimental analysis of mode I crack propagation in adhesively bonded joints by optical backscatter reflectometry and comparison with digital image correlation

R. A. A. Lima et al.

Summary: In this study, the relationship between Optical Backscatter Reflectometry-based backface strain sensing and adhesive damage was investigated using double cantilever beam specimens. It was found that backface strain sensing allowed for the identification of plastic deformations ahead of the crack-tip, which opens up new possibilities for fatigue crack monitoring and in-service measurements.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Mechanics

Experimental assessment of drilling-induced damage in impacted composite laminates for resin-injection repair: Influence of open/blind hole-hole interaction and orientation

W. L. Lai et al.

Summary: Experimental study showed that drilling-induced damage in BVID CFRP laminates led to significant reduction in mechanical properties, but single/binary-hole BVID laminates could generate counter-intuitive laminate stiffening effects.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A parametric study on static behavior and load sharing of multi-bolt hybrid bonded/bolted composite joints

Valentin S. Romanov et al.

Summary: The combination of bonding and bolting in a hybrid joint can result in a stronger and more durable joint. The overlap length of the joint significantly influences its strength, while the positioning of the bolts has a less pronounced impact. Joint stiffness is mainly governed by the overlap length, and load sharing between adhesive and bolts is geometry-dependent.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

A Two-Dimensional Model for Pin-Load Distribution and Failure Analysis of Composite Bolted Joints

Binkai Li et al.

Summary: A two-dimensional model of multibolt composite joints was established for pin-load distribution analysis. Experimental results and a 3D finite element model were used to validate its accuracy in predicting failure. FE models were then used to predict failure in laminated plates with three-row fastener joints, using Hashin stress criteria and degradation guidelines for material stiffness proposed by Tserpes. The model effectively predicted failure location and ultimate load, further validating its applicability in pin-load distribution analysis.

MATERIALS (2021)

添加到收藏夹

Article Mechanics

Mechanical properties of low-velocity impact damaged carbon fibre reinforced polymer laminates: Effects of drilling holes for resin-injection repair

W. L. Lai et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Mechanics

An explicit-implicit combined model for predicting residual strength of composite cylinders subjected to low velocity impact

Binbin Liao et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Mechanics

Progressive failure modelling of double-lap of composite bolted joints based on Puck's criterion

Song Zhou et al.

ENGINEERING FRACTURE MECHANICS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

A failure-envelope-based method for the probabilistic failure prediction of composite multi-bolt double-lap joints

Fengrui Liu et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Mechanics

Effect of damage on failure mode of multi-bolt composite joints using failure envelope method

Xiaoquan Cheng et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

A prediction method of the failure load and failure mode for composite pre-tightened tooth connections based on the characteristic lengths

Fei Li et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Progressive failure analysis on scaled open-hole tensile composite laminates

Hongchen Bao et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Net-tension strength of double-lap joints under bearing-bypass loading conditions using the cohesive zone model

A. M. Kabeel et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Materials Science, Composites

Investigation on characteristic length testing methods for failure prediction of composite multi-bolt joints

Jianyu Zhang et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)

添加到收藏夹

Article Mechanics

A progressive damage analysis based characteristic length method for multi-bolt composite joints

Jianyu Zhang et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Mechanics

A novel characteristic curve for failure prediction of multi-bolt composite joints

Jianyu Zhang et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Mechanics

Net-tension strength of double lap joints taking into account the material cohesive law

A. M. Kabeel et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Materials Science, Composites

A semi-analytical method to predict net-tension failure of mechanically fastened joints in composite laminates

G. Catalanotti et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Article Engineering, Manufacturing

A finite fracture mechanics model for the prediction of the open-hole strength of composite laminates

P. P. Camanho et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

添加到收藏夹

Review Materials Science, Composites

Mechanics of mechanically fastened joints in polymer-matrix composite structures - A review

Srinivasa D. Thoppul et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Mechanics

Finite fracture mechanics: A coupled stress and energy failure criterion

Pietro Cornetti et al.

ENGINEERING FRACTURE MECHANICS (2006)

添加到收藏夹

Article Mechanics

Bolted patch repair of composite panels with a cutout

V Kradinov et al.

COMPOSITE STRUCTURES (2002)

添加到收藏夹

Article Engineering, Multidisciplinary

Design and analysis of mechanically fastened composite joints and repairs

JM Zhang

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2001)

添加到收藏夹

Article Mechanics

On damage development in mechanically fastened composite laminates

T Ireman et al.

COMPOSITE STRUCTURES (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.