相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Desulphurisation with dispersed in-situ phases induced by composite ball explosive reaction during ultra-low carbon steel production in RH degasser
Xiaofeng Wang et al.
IRONMAKING & STEELMAKING (2022)
Numerical simulation of fluid flow and alloy melting in RH process for electrical steels
Hai-jun Wang et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)
The Flow Behavior of Molten Steel in an RH Degasser Under Different Ladle Bottom Stirring Processes
Rudong Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2022)
Large Eddy Simulation on the Transient Decarburization of the Molten Steel During RH Refining Process
Chang Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2022)
Hydrodynamic Modeling of Two-Phase Flow in the Industrial Ruhrstahl-Heraeus Degasser: Effect of Bubble Expansion Models
Gujun Chen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2022)
Numerical Simulation of Decarburization Reaction with Oxygen Blowing During RH Refining Process
Kaiyu Peng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2022)
Effects of Interphase Forces on Multiphase Flow and Bubble Distribution in Continuous Casting Strands
Wei Chen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2021)
Prediction of two phase flow behavior and mixing degree of liquid steel under reduced pressure
Yihong Li et al.
VACUUM (2021)
Collision-coalescence among inclusions with bubble attachment and transport in molten steel of RH
Shifu Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Lift force coefficient of ellipsoidal single bubbles in water
H. Hessenkemper et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2021)
Simulation and Application of Ruhrstahl-Heraeus (RH) Reactor with Bottom-Blowing
Jianfeng Dong et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2021)
Interaction between CO-Ar-Molten Steel Flow and Decarburization Reaction in Rheinstahl-Heraeus
Shifu Chen et al.
STEEL RESEARCH INTERNATIONAL (2021)
A Review of Bubble Dynamics in Liquid Metals
Tim Haas et al.
METALS (2021)
Numerical Simulation of Gas-Steel-Slag Multiphase Flow in the Vacuum Chamber of the RH Degasser
Bo Wang et al.
JOM (2021)
Effect of Drag Laws and Turbulence Models on CFD Modeling of the Bubble Behavior and Fluid Flow in RH Reactor
Qing Cao et al.
JOM (2021)
Thermodynamic and experimental study on CO2 injection in RH decarburization process of ultra-low carbon steel
Gujun Chen et al.
JOURNAL OF CO2 UTILIZATION (2021)
Mathematical model for decarburization of ultra-low carbon steel during RH treatment
Yu Huang et al.
IRONMAKING & STEELMAKING (2020)
Aspect ratio of bubbles in different liquid media: A novel correlation
Giorgio Besagni et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Discussion on Review of Physical and Numerical Approaches for the Study of Gas Stirring in Ladle Metallurgy
Dipak Mazumdar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)
Numerical simulation of Argon-Molten steel two-phase flow in an industrial single snorkel refining furnace with bubble expansion, coalescence, and breakup
Gujun Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Numerical Simulation of Fluid Flow in a Gas-Stirred Ladle Using a Particle-Free Surface Coupled Model
Bohong Zhu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)
Two-phase bubbly flow simulation using CFD method: A review of models for interfacial forces
Irfan Khan et al.
PROGRESS IN NUCLEAR ENERGY (2020)
A CFD Study on Refractory Wear in RH Degassing Process
Qiang Wang et al.
ISIJ INTERNATIONAL (2020)
Investigation of mixing and slag layer behaviours in the RH degasser with bottom gas injection by using the VOF?DPM coupled model
Shengping He et al.
IRONMAKING & STEELMAKING (2019)
Effects of the Ultrasound Treatment on Reaction Rates in the RH Processor Water Model System
Yong-tae Kim et al.
METALS AND MATERIALS INTERNATIONAL (2019)
Review, Analysis, and Modeling of Continuous Casting Tundish Systems
Dipak Mazumdar
STEEL RESEARCH INTERNATIONAL (2019)
Effects of Nozzle Radial Position, Separation Angle, and Gas Flow Partitioning on the Mixing, Eye Area, and Wall Shear Stress in Ladles Fitted with Dual Plugs
A. N. Conejo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)
Numerical Simulation of Gas and Liquid Two-Phase Flow in the RH Process
Haitao Ling et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)
Modeling Fluid Flow and Carbon Removal in the Ruhrstahl-Heraeus Reactor: Considering the Pumping Process
Gujun Chen et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Two-way coupling calculation for multiphase flow and decarburization during RH refining
Shi-Fu Chen et al.
VACUUM (2019)
A Review of Physical and Numerical Approaches for the Study of Gas Stirring in Ladle Metallurgy
Yu Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)
Assessment of an Eulerian multi-fluid VOF model for simulation of multiphase flow in an industrial Ruhrstahl-Heraeus degasser
Gujun Chen et al.
METALLURGICAL RESEARCH & TECHNOLOGY (2019)
Effect of snorkel shape on the fluid flow during RH degassing process: mathematical modelling
H. Ling et al.
IRONMAKING & STEELMAKING (2018)
Review on Modeling and Simulation of Continuous Casting
Brian G. Thomas
STEEL RESEARCH INTERNATIONAL (2018)
A more fundamental wall lubrication force from turbulent dispersion regularization for multiphase CFD applications
Nazar Lubchenko et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2018)
A new measuring concept to determine the lift force for distorted bubbles in low Morton number system: Results for air/water
T. Ziegenhein et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2018)
Investigation on the Fluid Flow and Decarburization Process in the RH Process
Haitao Ling et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)
Modeling on the Fluid Flow and Mixing Phenomena in a RH Steel Degasser with Oval Down-Leg Snorkel
Yan Luo et al.
STEEL RESEARCH INTERNATIONAL (2018)
Hydrogen Degassing in a Vacuum Arc Degasser Using a Three-Phase Eulerian Method and Discrete Population Balance Model
Faris Karouni et al.
STEEL RESEARCH INTERNATIONAL (2018)
Circulation flow rate and decarburization in the RH degasser under low atmospheric pressure
Gujun Chen et al.
VACUUM (2018)
Optimization of sampling location in the ladle during RH vacuum refining process
Bohong Zhu et al.
VACUUM (2018)
Numerical Simulation of Recirculating Flow and Physical Model of Slag-Metal Behavior in an RH Reactor: Application to Desulfurization
Johne Jesus Mol Peixoto et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)
Research on Selective Oxidation of Carbon and Aluminum with Introduction of CO2 in RH Refining of Low-Carbon Steel Process
Baochen Han et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)
Observations on bubble shapes in bubble columns under different flow conditions
T. Ziegenhein et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)
Interfacial forces used in two-phase flow numerical simulation
Tien-Juei Chuang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Effect of Interphase Forces on Gas-Liquid Multiphase Flow in RH Degasser
Bohong Zhu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2017)
Investigation of the Air-Argon-Steel-Slag Flow in an Industrial RH Reactor with VOF-DPM Coupled Model
Gujun Chen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2017)
Effect of gas rate and position of powder injection on RH refining process using numerical simulation
Kongfang Feng et al.
POWDER TECHNOLOGY (2017)
Mathematical modeling on the fluid flow during RH degassing process
Haitao Ling et al.
METALLURGICAL RESEARCH & TECHNOLOGY (2017)
A large scale interface multi-fluid model for simulating multiphase flows
Vinesh H. Gada et al.
APPLIED MATHEMATICAL MODELLING (2017)
Effect of Nozzle Blockage on Circulation Flow Rate in Up-Snorkel during the RH Degasser Process
Bohong Zhu et al.
STEEL RESEARCH INTERNATIONAL (2016)
Modeling Dynamics of Agglomeration, Transport, and Removal of Al2O3 Clusters in the Rheinsahl-Heraeus Reactor Based on the Coupled Computational Fluid Dynamics-Population Balance Method Model
Gujun Chen et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Investigation of Gas and Liquid Multiphase Flow in the Rheinsahl-Heraeus (RH) Reactor by Using the Euler-Euler Approach
Gujun Chen et al.
JOM (2016)
Investigation on the Effect of Nozzle Number on the Recirculation Rate and Mixing Time in the RH Process Using VOF plus DPM Model
Haitao Ling et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)
Mixing behavior in the RH degasser with bottom gas injection
Gujun Chen et al.
VACUUM (2016)
Simulation on Decarburization and Inclusion Removal Process in the Ruhrstahl-Heraeus (RH) Process with Ladle Bottom Blowing
Dian-Qiao Geng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)
Effect of interfacial forces and turbulence models on predicting flow pattern inside the bubble column
M. Pourtousi et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2014)
Modeling the Dynamics of Precipitation and Agglomeration of Oxide Inclusions in Liquid Steel
N. Rimbert et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Mathematical Model for Decarburization Process in RH Refining Process
Jiongming Zhang et al.
ISIJ INTERNATIONAL (2014)
Coordinated analysis of multiple factors of argon blowing parameters on the effect of circulation flow rate in RH vacuum refining process
Jie Han et al.
VACUUM (2014)
A numerical modelling investigation into design variables influencing mixing efficiency in full scale gas stirred ladles
Schalk W. P. Cloete et al.
MINERALS ENGINEERING (2013)
Numerical Simulation of Gas and Liquid Two-Phase Flow in Gas-Stirred Systems Based on Euler-Euler Approach
Wentao Lou et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)
Simulation on flow field and mixing phenomenon in RH degasser with ladle bottom blowing
D. -Q. Geng et al.
IRONMAKING & STEELMAKING (2012)
Effect of Traveling Magnetic Field on Flow, Mixing, Decarburization and Inclusion Removal during RH Refining Process
Dian-Qiao Geng et al.
ISIJ INTERNATIONAL (2012)
Modeling Related to Secondary Steel Making
Du Sichen
STEEL RESEARCH INTERNATIONAL (2012)
Two-fluid model with interface sharpening
L. Strubelj et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2011)
Drag and lift forces on clean spherical and ellipsoidal bubbles in a solid-body rotating flow
Marie Rastello et al.
JOURNAL OF FLUID MECHANICS (2011)
A Kinetic Model for the Ruhrstahl Heraeus (RH) Degassing Process
Marie-Aline van Ende et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2011)
Numerical Simulation of Fluid Flow and Interfacial Behavior in Three-phase Argon-Stirred Ladles with One Plug and Dual Plugs
Heping Liu et al.
STEEL RESEARCH INTERNATIONAL (2011)
A literature review on mechanisms and models for the coalescence process of fluid particles
Yixiang Liao et al.
CHEMICAL ENGINEERING SCIENCE (2010)
Numerical Simulation of the Multiphase Flow in the Rheinsahl-Heraeus (RH) System
Dian-Qiao Geng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2010)
A literature review of theoretical models for drop and bubble breakup in turbulent dispersions
Yixiang Liao et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Prediction of Circulation Flow Rate in the RH Degasser Using Discrete Phase Particle Modeling
P. Anil Kishan et al.
ISIJ INTERNATIONAL (2009)
Validation of CFD models for mono- and polydisperse air-water two-phase flows in pipes
Th. Frank et al.
NUCLEAR ENGINEERING AND DESIGN (2008)
Mathematical modelling of molten steel flow process in a whole RH degasser during the vacuum circulation refining process: Application of the model and results
JH Wei et al.
STEEL RESEARCH INTERNATIONAL (2006)
Numerical and experimental study of circulation flow rate in a closed circuit due to gas jet impingement
P. Anil Kishan et al.
INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2006)
Mathematical modelling of molten steel flow process in a whole RH degasser during the vacuum circulation refining process: Mathematical model of the flow
JH Wei et al.
STEEL RESEARCH INTERNATIONAL (2006)
Mathematical modelling of molten steel flow in a whole degasser during RH refining process
JH Wei et al.
IRONMAKING & STEELMAKING (2005)
Effect of rotating magnetic field on two-phase flow in RH vacuum degassing vessel
B Li et al.
ISIJ INTERNATIONAL (2005)
Mixing evaluation in the RH process using mathematical modelling
SK Ajmani et al.
ISIJ INTERNATIONAL (2004)
A new numerical model for predicting carbon concentration during RH degassing treatment
YG Park et al.
ISIJ INTERNATIONAL (2003)
Analysis of drag and virtual mass forces in bubbly suspensions using an implicit formulation of the lattice Boltzmann method
K Sankaranarayanan et al.
JOURNAL OF FLUID MECHANICS (2002)
The effect of operating parameters and dimensions of the RH system on melt circulation using numerical calculations
YG Park et al.
ISIJ INTERNATIONAL (2001)
Numerical calculation of circulation flow rate in the degassing Rheinstahl-Heraeus process
YG Park et al.
ISIJ INTERNATIONAL (2000)
Modeling of circulating flow in RH degassing vessel water model designed for two- and multi-legs operations
BK Li et al.
ISIJ INTERNATIONAL (2000)