☆ 4.6 Article

Compressive property and shape memory effect of 3D printed continuous ramie fiber reinforced biocomposite corrugated structures

SMART MATERIALS AND STRUCTURES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

The propagation of fibre-matrix interface debonding during CFRP edge milling process with the multi-teeth tool: A model analysis

Qihao Xu et al.

Summary: This paper provides a precise description of the mechanism behind fibre-matrix interface debonding during milling CFRP using a multi-teeth tool. The study reveals that the feed rate and tool radius have different impacts on the debonding degree, with tool radius having a greater influence.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Mechanics

New insights into the synergistic influence of voids and interphase characteristics on effective properties of unidirectional composites

Kui Wang et al.

Summary: This paper examines the impact of both matrix-pores and interphase-defects on the effective stiffness of unidirectional fiber-reinforced composites (UFRCs). A hierarchical modeling of porous UFRCs is established with an effective two-step homogenization scheme to study and validate the model. Parametric analyses provide new insights into the effect of pores on UFRCs.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Bending response and energy absorption of sandwich beams with novel auxetic honeycomb core

Xuan Zhao et al.

Summary: The study focuses on the bending response and energy absorption of the star-triangular honeycomb core (STH-C) and sandwich beam with an STH-C (STH-SW), showing that structural parameters significantly influence the load-bearing capacity of the sandwich beams, especially the thickness-to-length ratio t/l.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Agricultural Engineering

Interfacial and mechanical properties of continuous ramie fiber reinforced biocomposites fabricated by in-situ impregnated 3D printing

Ping Cheng et al.

Summary: This study aimed to investigate the mechanical properties and interfacial analysis of 3D printed continuous vegetal fiber reinforced biomass based composites. The results showed that the mechanical behaviors of the biocomposites were influenced by the interfacial properties between deposited layers and between fiber/matrix interfaces. By controlling the printing parameters, significant microstructure changes were observed in the biocomposites, leading to the highest tensile strength found at specific printing conditions.

INDUSTRIAL CROPS AND PRODUCTS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties and shape memory effect of 4D printed cellular structure composite with a novel continuous fiber-reinforced printing path

Ke Dong et al.

Summary: A printing strategy for fabricating diverse geometries of cellular continuous fiber-reinforced composites with uniform fiber distribution and interlacement in the structure was proposed and studied. The effects of printing and structural parameters on mechanical properties and shape memory performance were investigated, and a Finite Element model was developed to analyze the tensile process. Adjustment of geometric parameters and fiber content was found to optimize the mechanical properties and shape memory effect of 3D-printed CFRCs.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Engineering, Manufacturing

Compression behavior and energy absorption of 3D printed continuous fiber reinforced composite honeycomb structures with shape memory effects

Chengjun Zeng et al.

Summary: This study investigates the compression behavior and energy absorption characteristics of 3D printed CFRCHSs made using FFF technology. The results show that these structures have superior compression strength and specific energy absorption compared to other cellular topologies. Furthermore, shape recovery tests demonstrate their potential for use in lightweight intelligent systems and adjustable energy absorbing devices.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Mechanics

Bending performance and failure behavior of 3D printed continuous fi ber reinforced composite corrugated sandwich structures with shape memory capability

Chengjun Zeng et al.

Summary: In this study, a 3D printing technology was used to manufacture continuous fiber reinforced composite trapezoidal corrugated sandwich structures with shape memory capability. Theoretical models were developed to analyze bending performance and failure behavior, showing good agreement between predictions and experimental measurements. The 3D printed structures have the potential to provide new opportunities for lightweight systems and multifunctional applications.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on intralaminar crack propagation mechanisms in single- and multi-layer 2D woven composite laminate

Ping Cheng et al.

Summary: The experimental investigation focused on the intralaminar crack propagation of the carbon/epoxy two-dimensional plain woven composite material. Findings showed that the crack propagation direction is aligned along the intersecting position of warp and weft fibers. The process involves two major stages and was further verified by analysis of optical and scanning electron microscope images.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Prediction of deformation and failure behavior of continuous fiber reinforced composite fabricated by additive manufacturing

Yan Zhang et al.

Summary: This study focuses on improving printing quality, establishing a three-dimensional anisotropy model, and validating the adaptability of the predictive model for continuous fiber-reinforced polymer structures under impact. Through validation and comparison with experimental results, the model shows relatively low relative errors in predicting structural performance.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Heat-treatment effects on dimensional stability and mechanical properties of 3D printed continuous carbon fiber-reinforced composites

Kui Wang et al.

Summary: This study investigated the effects of heat-treatment on the performances of 3D printed continuous carbon fiber reinforced composites, showing that heat-treatment can improve mechanical properties by reducing porosity and strengthening interfaces, thus delaying crack initiation.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

3d printed continuous fiber reinforced composite auxetic honeycomb structures

Chao Quan et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Polymer Science

Structures, Properties and Potential Applications of Corncob Residue Modified by Carboxymethylation

Shishuai Gao et al.

POLYMERS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Additive manufacturing assisted investment casting: A low-cost method to fabricate periodic metallic cellular lattices

V. H. Carneiro et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hydration and Sorption Properties of Raw and Milled Flax Fibers

Abdalla H. Karoyo et al.

ACS OMEGA (2020)

添加到收藏夹

Article Engineering, Civil

3D printing and morphological characterisation of polymeric composite scaffolds

Bankole Oladapo et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Composites

Effect of processing temperature on the static and dynamic mechanical properties and failure mechanisms of flax fiber reinforced composites

Qian Li et al.

COMPOSITES COMMUNICATIONS (2020)

添加到收藏夹

Article Mechanics

3D printing of continuous fiber reinforced diamond cellular structural composites and tensile properties

Ke Dong et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of 3D and 4D printing of natural fibre biocomposites

Antoine Le Duigou et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Construction & Building Technology

Experimental study on basic mechanical properties of new BFRP-bamboo sandwich structure

Yaqiang Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Materials Science, Composites

Design of composite lattice materials combined with fabrication approaches

Jun Xu et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polylactic acid/sodium alginate/hydroxyapatite composite scaffolds with trabecular tissue morphology designed by a bone remodeling model using 3D printing

I. Fernandez-Cervantes et al.

JOURNAL OF MATERIALS SCIENCE (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental investigation on bending behavior of honeycomb sandwich panel with ceramic tile face-sheet

Zhonggang Wang et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Instruments & Instrumentation

Design oriented constitutive modeling of amorphous shape memory polymers and Its application to multiple length scale lattice structures

Cheng Yan et al.

SMART MATERIALS AND STRUCTURES (2019)

添加到收藏夹

Article Materials Science, Composites

Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties

J. M. Chacon et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite

Guo Dong Goh et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

添加到收藏夹

Article Mechanics

3D printed continuous fibre reinforced composite corrugated structure

Zhanghao Hou et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Elastic properties of 3D printed fibre-reinforced structures

Haider Al Abadi et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Programmable morphing composites with embedded continuous fibers by 4D printing

Qingrui Wang et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Engineering, Manufacturing

3D printing of composite sandwich structures using continuous carbon fiber and fiber tension

Kentaro Sugiyama et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Engineering, Manufacturing

An investigation into 3D printing of fibre reinforced thermoplastic composites

L. G. Blok et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Review Mechanics

The mechanics of composite corrugated structures: A review with applications in morphing aircraft

I. Dayyani et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Printing of Lightweight Cellular Composites

Brett G. Compton et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Article Mechanics

Dynamic behavior and flame retardancy of HDPE/hemp short fiber composites: Effect of coupling agent and fiber loading

K. Wang et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

FDM 3D PRINTING TECHNOLOGY IN MANUFACTURING COMPOSITE ELEMENTS

P. Dudek

ARCHIVES OF METALLURGY AND MATERIALS (2013)

添加到收藏夹

Article Chemistry, Applied

Influence of Chemical Treatments on the Interfacial Properties of Ramie Fiber Reinforced Poly(lactic acid) (PLA) Composites

Nanting Zhou et al.

JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2012)

添加到收藏夹

Article Polymer Science

Injection molding of bushes made of tribological PEEK composites

F. Quadrini et al.

EXPRESS POLYMER LETTERS (2007)

添加到收藏夹

Article Automation & Control Systems

Lasers and materials in selective laser sintering

JP Kruth et al.

ASSEMBLY AUTOMATION (2003)

添加到收藏夹

Article Computer Science, Software Engineering

A process planning method for improving build performance in stereolithography

AP West et al.

COMPUTER-AIDED DESIGN (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.