☆ 4.8 Article

Prestrain Programmable 4D Printing of Nanoceramic Composites with Bioinspired Microstructure

SMALL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Additive Manufacturing of Ti3C2-MXene-Functionalized Conductive Polymer Hydrogels for Electromagnetic-Interference Shielding

Ji Liu et al.

Summary: This study develops a hydrogel ink and proposes a freeze-thawing protocol to achieve 3D printing of conductive polymer hydrogels with high conductivity and shape fidelity. The printed hydrogel exhibits high conductivity, good mechanical properties, and customizable applications.

ADVANCED MATERIALS (2022)

添加到收藏夹

Review Materials Science, Biomaterials

Toward stronger robocast calcium phosphate scaffolds for bone tissue engineering: A mini-review and meta-analysis

Quyang Liu et al.

Summary: Bone tissue engineering is a rapidly developing strategy that focuses on the fabrication of scaffolds to stimulate tissue regeneration and provide mechanical support. Bioceramics and additive manufacturing play important roles in scaffold fabrication. However, current research faces the challenge of inadequate mechanical properties and requires further investigation into mechanical strengthening methods.

BIOMATERIALS ADVANCES (2022)

添加到收藏夹

Article Polymer Science

PVA/SA/MXene dual-network conductive hydrogel for wearable sensor to monitor human motions

Tingting Wang et al.

Summary: A conductive dual-network PVA/SA/MXene hydrogel was constructed using a green method, showing excellent cytocompatibility, high stretchability, and superior anti-fatigue ability. The hydrogel-based strain sensor presented good sensing sensitivity with a fast response time and low detection limit, capable of detecting and distinguishing various human motions even under slight strain.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Engineering, Biomedical

3D printing of sponge spicules-inspired flexible bioceramic-based scaffolds

Zhibo Yang et al.

Summary: Bioceramics are commonly used in bone tissue repair and regeneration due to their desirable biocompatibility and bioactivity. However, their brittleness limits their clinical applications. Inspired by the properties of sponge spicules, researchers combined 2D bioceramics and 3D printing to construct flexible bioceramic-based scaffolds with spicule-like concentric layered biomimetic microstructures. These scaffolds exhibit enhanced flexibility and toughness compared to traditional scaffolds, allowing for various shape changes without fracture, and demonstrate improved in vitro and in vivo bone-forming bioactivity compared to conventional scaffolds.

BIOFABRICATION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel class of bioinspired composite via ultrasound-assisted directed self-assembly digital light 3D printing

Xinwei Li et al.

Summary: The advent of advanced manufacturing technologies has the potential to create novel materials with unprecedented material properties. Through a specific manufacturing method, the discontinuous interpenetrating-phase composite (d-IPC) demonstrates unique mechanical properties and high energy absorption capability.

APPLIED MATERIALS TODAY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hierarchical Porous Ceramics with Distinctive Microstructures by Emulsion-Based Direct Ink Writing

Quyang Liu et al.

Summary: In this study, hierarchical porous ceramic lattices were fabricated using direct ink writing (DIW) technique and emulsion processing methods, and it was discovered that different gelling additives led to distinctive microstructures. The 3D printed hierarchical porous ceramics exhibited high porosity and compressive strength, making them suitable for various applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Flexible thermal conductive Al2O3@siloxane composite with rapid self-healing property based on carboxyl-amine dynamic reversible bonds

Ziyue Hu et al.

Summary: This study successfully fabricated a high-thermal conductivity and fast self-healable Al2O3@siloxane composite by introducing different sized spherical Al2O3 fillers into the SR/SCNR matrix system. The self-healing efficiency of the composite is up to 95.6%, and it exhibits optimal thermal conductivity of 5.85 W mK(-1).

RSC ADVANCES (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications

Yuliang Xia et al.

Summary: SMPs and SMPCs, as stimuli-responsive polymers, have broad application prospects in multiple fields with features of large recoverable deformation, enhanced mechanical properties, and controllable remote actuation. These materials combine functional, reversible, multiple, and controllable shape recovery processes, applicable in aerospace engineering, biomedical devices, flexible electronics, and soft robotics among others.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

Highly flexible, self-healable and conductive poly(vinyl alcohol)/Ti3C2Tx MXene film and it's application in capacitive deionization

Jiayi Ai et al.

Summary: This study reports a new self-healing material used in Capacitive deionization, which autonomously repairs damaged interfaces and shows good mechanical and electrochemical performance. The material quickly restores its shape in real application environments and exhibits good salt adsorption capacity and cycling stability in Capacitive deionization.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Adhesive, Stretchable, and Transparent Organohydrogels for Antifreezing, Antidrying, and Sensitive Ionic Skins

Zhirui He et al.

Summary: The study introduces an organohydrogel-based sensor with antifreezing and antidrying properties, featuring high transparency, stretchability, and adhesiveness. It shows stable performance at extreme temperatures or long-term storage, and is capable of detecting various motions.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

4D-Printing of Photoswitchable Actuators

Xili Lu et al.

Summary: This study introduces a new class of smart materials, shape-switching liquid crystalline elastomers, which can achieve long-lasting deformation and recovery through light and heat. The research team also successfully printed a Braille-like actuator that can display different letters.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Engineering, Environmental

Bioprocess-inspired synthesis of printable, self-healing mineral hydrogels for rapidly responsive, wearable ionic skin

Jingjiang Wei et al.

Summary: Oyster reefs inspired the synthesis of a novel mineral hydrogel and the preparation of an ionic skin with excellent mechanosensing and thermosensing abilities. These technologies hold promising applications in fields like wearable sensors and soft intelligent robots.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Environmental

Oxygen vacancy-rich WO3 heterophase structure: A trade-off between surface-limited pseudocapacitance and intercalation-limited behaviour

Xu Dong Liu et al.

Summary: The study introduces a novel oxygen vacancy-rich h-WO3/ort-WO3•0.33H₂O heterophase structure (HOHS) with a split-level nanotubes-on-nanoplates morphology, demonstrating superior capacitance performance and long-term stability. The HOHS electrode exhibits a collaborative charge-storage mechanism involving surface redox and proton intercalation, leading to excellent rate performance and high mass loading capability.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Scallion-Inspired Graphene Scaffold Enabled High Rate Lithium Metal Battery

Tao Ma et al.

Summary: Inspired by the structure of natural scallions, a novel strategy was introduced in this study to effectively improve battery performance through mesoscale scallion-like wrapping of graphene. This strategy not only successfully enhanced the performance of anodes but can also be extended to various cathode nanomaterials, showing remarkable rate performance and cycle stability.

NANO LETTERS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

High-strength scalable MXene films through bridging-induced densification

Sijie Wan et al.

Summary: The study utilized sequential bridging of hydrogen and covalent bonding agents to induce densification of MXene films and eliminate voids, resulting in highly compact and high-performance MXene films.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Synthesis of Mechanically Robust, Transparent Nanofiber-Reinforced Hydrogels for Highly Sensitive Multiple Sensing

Xuyan Lu et al.

Summary: This study introduces an in situ synthesis strategy for developing bioinspired chemically integrated silica-nanofiber-reinforced hydrogels (SFRHs) with robust mechanical and electronic performance. The resultant SFRHs demonstrate excellent mechanical properties, high transmittance, enhanced ionic conductivity, and sensitivity to multiple stimuli, making them suitable for various applications.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

The effect of oxygen vacancies on the coordinatively unsaturated Al-O acid-base pairs for propane dehydrogenation

Zean Xie et al.

Summary: Recent studies have shown that coordinatively unsaturated metal-O Lewis acid-base pairs of metal oxides can efficiently activate the C-H bond of light alkanes, and the surface oxygen vacancy amount of Al2O3 plays a crucial role in propane dehydrogenation (PDH) reaction.

JOURNAL OF CATALYSIS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Well ordered-microstructure bioceramics

Tian Li et al.

Summary: The study introduces a universal biomineralization-assembly-sintering approach for the fabrication of well ordered microstructure meta-hydroxyapatite, inspired by high-performance natural composites. The material demonstrates remarkable mechanical performances matching that of human cortical bone, playing a significant role in stimulating bone defects regeneration in vivo.

APPLIED MATERIALS TODAY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superior Flexibility in Oxide Ceramic Crystal Nanofibers

Yuanyuan Zhang et al.

Summary: The polymer-induced assembly strategy successfully constructs TiO2 crystals into continuous nanofibers with stretchable and bendable properties. The resulting nanofibers exhibit characteristics of both soft and hard matter after sintering, and the method can be extended to synthesize other ceramic membranes.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

Tough and super-stretchable conductive double network hydrogels with multiple sensations and moisture-electric generation

Peng He et al.

Summary: This study developed a conductive hydrogel incorporating MXene-cellulose nanocrystals (CNCs), tamarind gum (TG), and polyacrylamide (PAM), which exhibited high toughness, stretchability, and sensitivity. The hydrogel is self-powered, generating an open-circuit voltage from moisture flow, and capable of sensing pressure, strain, humidity, and temperature.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Highly Stretchable Nanocomposite Hydrogels with Outstanding Antifatigue Fracture Based on Robust Noncovalent Interactions for Wound Healing

Mengyuan Zhang et al.

Summary: Nanocomposite hydrogels with excellent mechanical properties were prepared, showing remarkable resistance to fatigue fracture and hemostatic activity. These hydrogels not only accelerated skin wound healing in mice but also exhibited exceptional mechanical performance.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Development of a 3D printable and highly stretchable ternary organic-inorganic nanocomposite hydrogel

Chen Hu et al.

Summary: A novel 3D printable organic-inorganic hybrid hydrogel was developed, combining thermoresponsive hydrogel with clay LAPONITE XLG and in situ polymerized poly(N,N-dimethylacrylamide), showing excellent mechanical strength and high stretchability for applications in tissue engineering, drug delivery, and soft robotics.

JOURNAL OF MATERIALS CHEMISTRY B (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Complex-Shaped Cellulose Composites Made by Wet Densification of 3D Printed Scaffolds

Michael K. Hausmann et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superhigh Electromagnetic Interference Shielding of Ultrathin Aligned Pristine Graphene Nanosheets Film

Qinwei Wei et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Applied

Nano-hydroxyapatite enhanced double network hydrogels with excellent mechanical properties for potential application in cartilage repair

Shuchun Gan et al.

CARBOHYDRATE POLYMERS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Black ZrO2 synthesized by molten lithium reduction strategy for photocatalytic hydrogen generation

Di Zu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Ultratough graphene-black phosphorus films

Tianzhu Zhou et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Super-tough MXene-functionalized graphene sheets

Tianzhu Zhou et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Material Combination Concept to Realize 4D Printed Products with Newly Emerging Property/Functionality

Hongzhi Wu et al.

ADVANCED SCIENCE (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

Structure-property-function relationships of natural and engineered wood

Chaoji Chen et al.

NATURE REVIEWS MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Microengineering Pressure Sensor Active Layers for Improved Performance

Sara Rachel Arussy Ruth et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Black Bioceramics: Combining Regeneration with Therapy

Xiaocheng Wang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Engineering, Biomedical

Biodegradable and Electroactive Regenerated Bacterial Cellulose/MXene (Ti3C2Tx) Composite Hydrogel as Wound Dressing for Accelerating Skin Wound Healing under Electrical Stimulation

Lin Mao et al.

ADVANCED HEALTHCARE MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Anomalous absorption of electromagnetic waves by 2D transition metal carbonitride Ti3CNTx (MXene)

Aamir Iqbal et al.

SCIENCE (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effective ion sieving with Ti3C2Tx MXene membranes for production of drinking water from seawater

Li Ding et al.

NATURE SUSTAINABILITY (2020)

添加到收藏夹

Article Chemistry, Physical

A tough and fluorescent dual nanocomposite hydrogel based on SiO2@TiO2 core-shell nanoparticles

Di Wang et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Effects of molecular mass of polymer on mechanical properties of clay/poly (ethylene oxide) blend hydrogels, and comparison between them and clay/sodium polyacrylate blend hydrogels

H. Takeno et al.

COLLOID AND POLYMER SCIENCE (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Impact-resistant nacre-like transparent materials

Z. Yin et al.

SCIENCE (2019)

添加到收藏夹

Article Chemistry, Applied

Construction of physical-crosslink chitosan/PVA double-network hydrogel with surface mineralization for bone repair

Shichao Bi et al.

CARBOHYDRATE POLYMERS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Shape-shifting structured lattices via multimaterial 4D printing

J. William Boley et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advances in 4D Printing: Materials and Applications

Xiao Kuang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Anisotropically High Thermal Conductive Boron Nitride/Epoxy Composite Based on Nacre-Mimetic 3D Network

Jingkai Han et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dynamics of Cellulose Nanocrystal Alignment during 3D Printing

Michael K. Hausmann et al.

ACS NANO (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Oxygen Vacancies in ZnO Nanosheets Enhance CO2 Electrochemical Reduction to CO

Zhigang Geng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

添加到收藏夹

Article Engineering, Biomedical

Mechanically strong dual responsive nanocomposite double network hydrogel for controlled drug release of asprin

Yang Chen et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Instant Strong Adhesive Behavior of Nanocomposite Gels toward Hydrophilic Porous Materials

Kazutoshi Haraguchi et al.

LANGMUIR (2018)

添加到收藏夹

Article Chemistry, Physical

Synthesis of layered double hydroxide/poly(N-isopropylacrylamide) nanocomposite hydrogels with excellent mechanical and thermoresponsive performances

Yaping Zhang et al.

SOFT MATTER (2018)

添加到收藏夹

Article Multidisciplinary Sciences

MXenes stretch hydrogel sensor performance to new limits

Yi-Zhou Zhang et al.

SCIENCE ADVANCES (2018)

添加到收藏夹

Article Polymer Science

High-Strength Nanocomposite Hydrogels with Swelling-Resistant and Anti-Dehydration Properties

Bo Xu et al.

POLYMERS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Origami and 4D printing of elastomer-derived ceramic structures

Guo Liu et al.

SCIENCE ADVANCES (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Bioinspired polymeric woods

Zhi-Long Yu et al.

SCIENCE ADVANCES (2018)

添加到收藏夹

Article Polymer Science

Synthesis, Characterization, and Antifogging Application of Polymer/Al2O3 Nanocomposite Hydrogels with High Strength and Self-Healing Capacity

Bo Xu et al.

POLYMERS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bioinspired, Graphene/Al2O3 Doubly Reinforced Aluminum Composites with High Strength and Toughness

Yunya Zhang et al.

NANO LETTERS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

3D Printing Bioinspired Ceramic Composites

Ezra Feilden et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Chemistry, Physical

Stretchable dual nanocomposite hydrogels strengthened by physical interaction between inorganic hybrid crosslinker and polymers

Juan Du et al.

APPLIED CLAY SCIENCE (2017)

添加到收藏夹

Article Polymer Science

Mechanical Robust and Self-Healable Supramolecular Hydrogel

Jing Zheng et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2016)

添加到收藏夹

Article Biochemistry & Molecular Biology

Structural Characterization of Sodium Alginate and Calcium Alginate

Hadas Hecht et al.

BIOMACROMOLECULES (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Black titanium dioxide (TiO2) nanomaterials

Xiaobo Chen et al.

CHEMICAL SOCIETY REVIEWS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

New functional insights into the internal architecture of the laminated anchor spicules of Euplectella aspergillum

Michael A. Monn et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)

添加到收藏夹

Article Engineering, Biomedical

A Near Infrared Light Triggered Hydrogenated Black TiO2 for Cancer Photothermal Therapy

Wenzhi Ren et al.

ADVANCED HEALTHCARE MATERIALS (2015)

添加到收藏夹

Article Materials Science, Biomaterials

Electric field-induced gradient strength in nanocomposite hydrogel through gradient crosslinking of clay

Yun Tan et al.

JOURNAL OF MATERIALS CHEMISTRY B (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Novel Nanocomposite Hydrogels Consisting of Layered Double Hydroxide with Ultrahigh Tensibility and Hierarchical Porous Structure at Low Inorganic Content

Ziqiao Hu et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Review Multidisciplinary Sciences

Structural Biological Materials: Critical Mechanics-Materials Connections

Marc Andre Meyers et al.

SCIENCE (2013)

添加到收藏夹

Article Materials Science, Biomaterials

A tough hydrogel-hydroxyapatite bone-like composite fabricated in situ by the electrophoresis approach

Zhiyong Li et al.

JOURNAL OF MATERIALS CHEMISTRY B (2013)

添加到收藏夹

Article Engineering, Biomedical

Gelatin functionalization with tyrosine derived moieties to increase the interaction with hydroxyapatite fillers

Axel T. Neffe et al.

ACTA BIOMATERIALIA (2011)

添加到收藏夹

Article Multidisciplinary Sciences

Increasing Solar Absorption for Photocatalysis with Black Hydrogenated Titanium Dioxide Nanocrystals

Xiaobo Chen et al.

SCIENCE (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Unique Microcracking Process Associated with the Inelastic Deformation of Haversian Bone

Vincent Ebacher et al.

ADVANCED FUNCTIONAL MATERIALS (2009)

添加到收藏夹

Article Multidisciplinary Sciences

Bioinspired design and assembly of platelet reinforced polymer films

Lorenz J. Bonderer et al.

SCIENCE (2008)

添加到收藏夹

Article Pharmacology & Pharmacy

Swelling studies and in vitro release of verapamil from calcium alginate and calcium alginate-chitosan beads

George Pasparakis et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2006)

添加到收藏夹

Article Endocrinology & Metabolism

Effect of microstructure on the mechanical properties of Haversian cortical bone

T Hoc et al.

BONE (2006)

添加到收藏夹

Article Multidisciplinary Sciences

Biological glass fibers: Correlation between optical and structural properties

J Aizenberg et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.