☆ 4.7 Article

Surface hardening of Zr-based metallic glass via laser surface alloying with silicon powder

SCRIPTA MATERIALIA (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Topology-optimized bulk metallic glass cellular materials for energy absorption

Josephine Carstensen et al.

Summary: Topology optimization is used to design porous cellular materials with extreme elastic properties, aiming to maximize energy absorption capacity until local failure occurs. By optimizing designs and fabricating with different base materials, such as bulk metallic glasses, superior energy absorption is achieved through combinations of buckling and yielding mechanisms. Further research on different materials offer potential directions to improve post-peak responses of topology-optimized cellular materials.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Chemistry, Physical

Nanosecond pulsed laser-induced formation of nanopattern on Fe-based metallic glass surface

Yongfeng Qian et al.

Summary: Fe-based metallic glasses with micro/nano-structures were fabricated on the surface by nanosecond pulsed laser irradiation technology, resulting in distinguished microstructures such as nanoparticles and network nanostructures. The formation mechanisms of these structures were attributed to laser-induced element enrichment and diffusion and connection of nanoparticles under the combined influence of recoil pressure and surface topography.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Microstructures and mechanical properties of Zr-based metallic glass ablated by nanosecond pulsed laser in various gas atmospheres

Yongfeng Qian et al.

Summary: The gas atmosphere significantly affects the surface characteristics and mechanical properties of laser-ablated metallic glass, but does not influence the formation of micro-convex.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Controllable additive manufacturing of gradient bulk metallic glass composite with high strength and tensile ductility

Yunzhuo Lu et al.

Summary: Using laser additive manufacturing, a multi-layered Zr-based BMGC with gradient distribution of crystalline dendrites was fabricated, leading to exceptional combination of yield strength and tensile ductility. This synergy is attributed to the interaction of adjacent layers and the asynchronous deformation mode associated with the heterogeneous microstructure, showing promise for high-performance BMGCs for structural applications.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hybrid processing of bearing steel by combining Direct Laser Interference Patterning and laser hardening for wear resistance applications

Mikhael El-Khoury et al.

Summary: In this study, a hybrid process was proposed to increase the hardness and wear resistance of laser-generated surface textures through a laser heat treatment. The process involved Direct Laser Interference Patterning to create well-defined periodic surface features on bearing steel, followed by a laser-hardening process. The hybrid approach resulted in significantly improved wear resistance of the surface patterns in harsh environments.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

In vitro cytocompatibility of a Zr-based metallic glass modified by laser surface texturing for potential implant applications

Yang Jiao et al.

Summary: This study demonstrated the feasibility of using nanosecond laser surface texturing to modify the cytocompatibility of a Zr-based BMG material, with grooved surfaces showing higher cell viability and better adhesion. The improved cytocompatibility of the groove-textured sample was attributed to higher surface roughness, increased presence of metallic oxides, and enhanced hydrophilicity.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Engineering, Mechanical

Influence of precipitation hardening on the high-temperature sliding wear resistance of an aluminium alloyed iron-nickel base alloy

Julian Krell et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and wear properties of self-lubricating TiB2-TiCxNy ceramic coatings on Ti-6Al-4V alloy fabricated by laser surface alloying

Jingjie Dai et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

The coupling effects of laser thermal shock and surface nitridation on mechanical properties of Zr-based metallic glass

Hu Huang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strengthening Ti-based bulk metallic glass composites containing phase transformable β-Ti via Al addition

Jinhao Zhang et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion resistance improvement of 45 steel by Fe-based amorphous coating

Guokun Huang et al.

VACUUM (2018)

添加到收藏夹

Article Engineering, Mechanical

Self-lubricating surface layers produced using laser alloying of bearing steel

A. Piasecki et al.

WEAR (2017)

添加到收藏夹

Article Materials Science, Ceramics

Effect of particle size gradation on the performance of glass-ceramic 3D printing process

Changning Sun et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Editorial Material Chemistry, Physical

Is metallic glass poised to come of age?

John Plummer et al.

NATURE MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recent development and application products of bulk glassy alloys

A. Inoue et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical properties of bulk metallic glasses

Morgana Martin Trexler et al.

PROGRESS IN MATERIALS SCIENCE (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.